SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 5000 Watt. 20 to 250 Volt MAXIMUM RATINGS AND CHARACTERISTICS. Rating Symbol Value Units
|
|
|
- Vivian Blankenship
- 5 years ago
- Views:
Transcription
1 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 5000 Watt STAND-OFF VOLTAGE 20 to 250 Volt FEATURES For surface mounted applications in order to optimize board space. Glass passivated junction Low inductance Plastic package has Underwriters Laboratory Flammability Classification 94V-O High temperature soldering : 260 C /10 seconds at terminals ESD IEC Air + 30kV, Contact + 30kV Lead free in compliance with EU RoHS 2011/65/EU directive Green molding compound as per IEC61249 Std.. (Halogen Free) MECHANICAL DATA Case: JEDEC DO-214AB,Molded plastic over passivated junction. Terminals: Solder plated,solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Standard Packaging: 16mm tape (EIA-481) Weight: ounce, gram 1 2 Cathode Anode MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25 Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. Rating Symbol Value Units Peak Power Dissipation (tp=10/1000μs waveform) (Notes 1) P PP 5000 Watts Peak Pulse Current on (tp=10/1000μs waveform) (Notes 1) I PPM See table Amps Typical Thermal Resistance Junction to Air (Notes 2) R θja 110 O C / W ESD IEC (Air) ESD IEC (Contact) VESD kv Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load I FSM 300 Amps Operating Junction and Storage Temperature Range T J,T STG -55 to +150 O C NOTES : 1.Non-repetitive current pulse. 2.Mounted on a FR4 PCB, single-sided copper, mini pad. 3.A transient suppressor is selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level. PAGE. 1
2 Reverse Stand-off Voltage Breakdown Voltage Te s t Current Reverse Leakage Max.Clamp Voltage 10/1000 s Peak Pulse Current 10/1000 s Part Number V IT V RWM (Notes 3) IT VRWM IPP IPP Min. Max. V V V ma A V A Marking Code 5.0SMCJ20A HEV 5.0SMCJ22A HEX 5.0SMCJ24A HEZ 5.0SMCJ26A HFE 5.0SMCJ28A HFG 5.0SMCJ30A HFK 5.0SMCJ33A HFM 5.0SMCJ36A HFP 5.0SMCJ40A HFR 5.0SMCJ43A HFT 5.0SMCJ45A HFV 5.0SMCJ48A HFX 5.0SMCJ51A HFZ 5.0SMCJ54A HGE 5.0SMCJ58A HGG 5.0SMCJ60A HGK 5.0SMCJ64A HGM 5.0SMCJ70A HGP 5.0SMCJ75A HGR 5.0SMCJ78A HGT 5.0SMCJ85A HGV 5.0SMCJ90A HGX 5.0SMCJ100A HGZ 5.0SMCJ110A HHE 5.0SMCJ120A HHG 5.0SMCJ130A HHK 5.0SMCJ150A HHM 5.0SMCJ160A HHP 5.0SMCJ170A HHR 5.0SMCJ180A HHT 5.0SMCJ190A HHV 5.0SMCJ200A HHX 5.0SMCJ210A HHZ 5.0SMCJ220A HIE 5.0SMCJ250A HIG PAGE. 2
3 100 Peak Pulse Power (P PP ) or Current (I PP ) Derating in Percentage % T j -Initial temperature (ºC) C J, Junction Capacitance (pf) VR=0V VBR, Reverse Breakdown Voltage (V) I FSM - Peak Forward Surge Current (A) Number of Cycles at 60Hz PAGE. 3
4 MOUNTING PAD LAYOUT ORDER INFORMATION Packing information T/R - 3K per 13" plastic Reel T/R - 0.5K per 7" plastic Reel PAGE. 4
5 Part No_packing code_version 5.0SMCJ20A_R1_ SMCJ20A_R2_00001 For example : RB500V-40_R2_00001 Part No. Serial number Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1 st Code Packing size code 2 nd Code HF or RoHS 1 st Code 2 nd ~5 th Code Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) U D PAGE. 5
6 Disclaimer Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. PAGE. 6
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
US1R SURFACE MOUNT ULTRAFAST RECTIFIER FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS. VOLTAGE 1300 Volt CURRENT 1 Ampere
SURFACE MOUNT ULTRAFAST RECTIFIER VOLTAGE 300 Volt CURRENT Ampere FEATURES For surface mounted applications in order to optimize board space Easy pick and place Ultrafast recovery times for high efficiency
RS1AWG SERIES SURFACE MOUNT FAST RECOVERY RECTIFIER FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE 50 to 000 Volts CURRENT Amperes FEATURES For surface mounted applications in order to optimize board space Easy pick and place Fast recovery times for high
Green molding compound as per IEC61249 Std.. (Halogen Free) 0.098(2.5) 0.086(2.2)
SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 50 to 1000 Volt CURRENT 1 Ampere FEATURES Recongnized File #E111753 0.335(8.51) 0.316(8.05) 0.009(0.25) 0.060(1.524) 0.040(1.016) Plastic
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
MS4~MS20 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 40 to 200 Volt CURRENT Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications
MB18F SERIES SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER. VOLTAGE Volt CURRENT 1 Ampere FEATURES MECHANICAL DATA
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 80-200 Volt CURRENT Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Ultra
1 Watt MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MOUNT SILICON ZENER DIODE VOLTAGE 3.3 to 51 Volt POWER 1 Watt FEATURES For surface mounted applications in order to optimize board space Low inductance Plastic package has Underwriters Laboratory
MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 400~1000 Volt CURRENT 1.2 Amper. per diode I FSM 50 A
MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 400~000 Volt CURRENT.2 Amper FEATURES Glass Passivated Chip Junciton Ideally Suited for Automatic Assembly Save Space On Printed
Rating Symbol Value Units T STG. Parameter Symbol Conditions Min. Typical Max. Units I BR V R I PP
SINGLE LINE TVS DIODE FOR ESD PROTECTION PORTABLE ELECTRONICS VOLTAGE 5 Volt POWER 200 Watt FEATURES 200 Watts peak pules power( tp=8/20μs) Small package for use in portable electronics IEC61000-4-2 8KV
MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 100~1000 Volt CURRENT 1 Amper Recongnized File #E139973
MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 100~1000 Volt CURRENT 1 Amper Recongnized File #E139973 FEATURES Glass Passivated Chip Junciton Ideally Suited for Automatic Assembly
SK54BLF LOW VF SCHOTTKY RECTIFIER. VOLTAGE 40 Volt CURRENT 5 Ampere FEATURES MECHANICAL DATA. MAXIMUM RATINGS (TA=25 o C unless otherwise noted)
LOW VF SCHOTTKY RECTIFIER VOLTAGE 40 Volt CURRENT 5 Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94VO utilizing Flame Retardant Expoxy Molding Compound Ultra
PJSRV05-4 LOW CAPACITANCE TVS DIODE ARRAY. VOLTAGE 5 Volt POWER 350 Watt FEATURES MECHANICAL DATA APPLICATIONS MAXIMUM RATINGS
LOW CAPACITANCE TVS DIODE ARRAY The PJSRV5-4 has a low capacitance of 1.2pF and operates with virtually no insertion loss to 1GHz. This makes the device ideal for protection of high-speed data lines such
5 to 70 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space AEC-Q101 qualified
SS12L SERIES LOW VF SURFACE MOUNT SCHOTTKY RECTIFIER MECHANICAL DATA. VOLTAGE 20 to 90 Volt CURRENT 1.0 Ampere FEATURES
LOW VF SURFACE MOUNT SCHOTTKY RECTIFIER VOLTAGE 20 to 90 Volt CURRENT.0 Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Low
MMBD914 SURFACE MOUNT SWITCHING DIODE. VOLTAGE 100 Volt POWER 225 mwatt FEATURES MECHANICAL DATA ABSOLUTE RATINGS THERMAL CHARACTERISTICS
SURFACE MOUNT SWITCHING DIODE VOLTAGE 100 Volt POWER 225 mwatt FEATURES Very fast reverse recovery (Trr < 2ns typical) Low capacitance (4pF @ 0V typical) Surface mount package ideally suited for automatic
SXM54ALF ULTRA LOW VF SCHOTTKY RECTIFIER. VOLTAGE 45 Volt CURRENT 5 Ampere FEATURES MECHANICAL DATA. MAXIMUM RATINGS(TA=25 o C unless otherwise noted)
ULTRA LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volt CURRENT 5 Ampere FEATURES Ideal for automated placement Ultra Low forward voltage drop, low power loss High efficiency operation Low thermal resistance Ultra
BAS100ATB6 SURFACE MOUNT DUAL ISOLATED OPPOSING SILICON SCHOTTKY DIODES. VOLTAGE 100 Volt FEATURES MECHANICAL DATA
SURFACE MOUNT DUAL ISOLATED OPPOSING SILICON SCHOTTKY DIODES VOLTAGE 00 Volt FEATURES Smallest 00V Dual, isolated Schottky diode currently available Lead free in compliance with EU RoHS 20/65/EU directive
PJSD05LCFN2 TYPICAL CHARACTERISTIC CURVES. I R,Reverse Current (na) Percent of Rated Peak Reverse Voltage (%) time, s.
BI-DIRECTIONAL ESD PROTECTION DIODE This bi-directional TVS has been designed to protect sensitive equipment against ESD and to prevent Latch-Up events in CMOS circuitry operating at 5V dc and below.this
SK23L SERIES. LOW VF SCHOTTKY RECTIFIER VOLTAGE 30 to 100 Volts CURRENT 2.0 Amperes FEATURES MECHANICAL DATA
LOW VF SCHOTTKY RECTIFIER VOLTAGE 30 to 00 Volts CURRENT 2.0 Amperes FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94VO For surface mounted applications Low profile package
SVM1045V2 LOW VF SCHOTTKY RECTIFIER. VOLTAGE 45 Volt CURRENT 10 Ampere FEATURES MECHANICAL DATA. MAXIMUM RATINGS(TA=25 o C unless otherwise noted)
.. LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volt CURRENT Ampere FEATURES Ideal for automated placement Low forward voltage drop, low power loss High efficiency Operation Low thermal resistance 0.172(4.35)
SVM1045V LOW VF SCHOTTKY RECTIFIER. VOLTAGE 45 Volt CURRENT 10 Ampere FEATURES MECHANICAL DATA. MAXIMUM RATINGS(TA=25 o C unless otherwise noted)
.. SVM45V LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volt CURRENT Ampere FEATURES Ideal for automated placement Ultra low forward voltage drop, low power loss High efficiency Operation 0.172(4.35) 0.167(4.25)
2N7002KDW. 60V N-Channel Enhancement Mode MOSFET - ESD Protected. Parameter Symbol Limit Units 60 V. Drain-Source Voltage V DS + 20 V
60V N-Channel Enhancement Mode MOSFET - ESD Protected FEATURES R DS(ON), @10V,I DS @500mA=3Ω R DS(ON), @4.5V,I DS @200mA=4Ω Advanced Trench Process Technology High Density Cell Design For Ultra Low On-Resistance
ES1A~ES1J SURFACE MOUNT SUPERFAST RECTIFIER FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MUNT SUPERFAST RECTIFIER VLTAGE 5 to 6 Volts CURRENT 1 Amperes FEATURES For surface mounted applications in order to optimize board space Built-in strain relief Easy pick and place Superfast recovery
1N4148W SURFACE MOUNT SWITCHING DIODES. VOLTAGE 100 Volt POWER 410mWatt FEATURES MECHANICAL DATA
SURFACE MUNT SWITCHING DIDES VLTAGE 100 Volt PWER 410mWatt FEATURES 0.154(3.90) 0.141(3.60) Fast switching Speed. Electrically ldentical to Standerd JEDEC High Conductance Surface Mount Package ldeally
1N4736A SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA
N4736A SERIES SILICON ZENER DIODE VOLTAGE 6.8 to Volt POWER Watt FEATURES Low inductance High temperature soldering : 260 C /0 seconds at terminals Plastic package has Underwriters Laboratory Flammability
PUF5GI / UF504IG ULTRAFAST RECOVERY RECTIFIERS. Voltage 400 V Current 5 A. Features UF504IG DO-201AD. Mechanical Data UF5GI SMC
ULTRAFAST RECOVERY RECTIFIERS Voltage 400 V Current 5 A Features Silicon epitaxial high-speed diodes Soft recovery characteristics Low forward voltage, high current capability Hermetically sealed. Low
BAV3004W HIGH VOLTAGE SURFACE MOUNT SWITCHING DIODE
HIGH VOLTAGE SURFACE MOUNT SWITCHING DIODE VOLTAGE 350 Volts POWER 410 mwatts SOD-123 Unit:inch(mm) FEATURES Fast Switching Speed Surface Mount Package ldeally Suited for Automatic Insertion High Conductance
PJSD12LCFN2 BI-DIRECTIONAL ESD PROTECTION DIODE
BIDIRECTIONAL ESD PROTECTION DIODE This bidirectional TVS has been designed to protect sensitive equipment against ESD and to prevent LatchUp events in CMOS circuitry operating at 12Vdc and below.this
MBR1040VL SURFACE MOUNT LOW FORWARD DROP SCHOTTKY BARRIER. VOLTAGE 40 Volt CURRENT 1 Amper FEATURES MECHANICAL DATA ABSOLUTE RATINGS
SURFAE MOUNT LOW FORWARD DROP SHOTTKY BARRIER VOLTAGE 40 Volt URRENT 1 Amper FEATURES Fast switching speed Surface mount package ideally suited for automatic insertion 0.115(2.90) 0.106(2.70) 0.075(1.90)
1.5SMCJ5.0A-AU~1.5SMCJ70CA-AU
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E2467 FEATURES For surface mounted applications in order to optimize board space.
PBAT54-AU SERIES. SURFACE MOUNT SCHOTTKY DIODES Voltage 30 V Current 0.2 A. Features. Mechanical Data
SURFACE MOUNT SCHOTTKY DIODES Voltage 30 V Current 0.2 A SOT-23 Features Fast switching speed Surface mount package ideally suited for automatic insertion electrical identical standard JEDEC High conductor
2N7002KTB. 60V N-Channel Enhancement Mode MOSFET - ESD Protected FEATURES MECHANICAL DATA. =25 O C unless otherwise noted )
6V N-Channel Enhancement Mode MOSFET - ESD Protected FEATURES R DS(ON), @V,I DS @5mA=3Ω R DS(ON), @4.5V,I DS @2mA=4Ω Advanced Trench Process Technology High Density Cell Design For Ultra Low On-Resistance
ER2DAF SURFACE MOUNT RECTIFIER. VOLTAGE 200 Volts CURRENT 2 Amperes FEATURES MECHANICAL DATA
SURFACE MOUNT FEATURES RECTIFIER VOLTAGE 200 Volts CURRENT 2 Amperes Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Glass passivated junction
PJ3L85 DATA BUS TERMINATOR / 3-PHASE, FULL WAVE BRIDGE SOT-363 FEATURES APPLICATIONS MAXIMUM RATINGS THERMAL CHARACTERISTICS
DATA BUS TERMINATOR / 3PHASE, FULL WAVE BRIDGE This highly integrated device is designed as rail to rail overvoltage protection clamp for up to 3 data lines. It is also ideal as a threephase, full wave
MMBT4403 PNP GENERAL PURPOSE SWITCHING TRANSISTOR FEATURES MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS THERMAL CHARACTERISTICS
PNP GENERAL PURPOSE SWITCHING TRANSISTOR VOLTAGE 40V POWER 225mW FEATURES PNP epitaxial silicon, planar design 0.120(3.04) 0.110(2.80) Collectoremitter voltage V CE = 40V Collector current I C =600mA Complimentary
PJSD03TS~PJSD36TS. SINGLE LINE TVS DIODE FOR ESD PROTECTION PORTABLE ELECTRONICS VOLTAGE 3~36 Volt POWER 120 Watt FEATURES APPLICATIONS
SINGLE LINE TVS DIODE FOR ESD PROTECTION PORTABLE ELECTRONICS VOLTAGE 3~36 Volt POWER 120 Watt FEATURES 120 Watts peak pules power( tp=8/20μs) Small package for use in portable electronics Suitable replacement
PJSD05CW-AU SERIES. Fig.130. Single Line TVS Diode for ESD Protection in Portable Electronics FEATURES MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS
PJSD5W-AU SERIES Single Line TVS Diode for ESD Protection in Portable Electronics VOLTAGE 5 to 36 Volt POWER 35 Watt FEATURES Transient protection for data lines to IE 61-4-2 (ESD) + 15kV (air),+ 8kV (contact).78(1.95).68(1.75)
PSX34-AU. SURFACE MOUNT LOW VF SCHOTTKY BARRIER RECTIFIER Voltage 40 V Current 3 A. Features. Mechanical Data
SURFACE MOUNT LOW VF SCHOTTKY BARRIER RECTIFIER Voltage 40 V Current 3 A Features Deal for automated placement Low power loss, high efficiency High surge current capability Lead free in compliance with
DUAL SURFACE MOUNT NPN/PNP TRANSISTORS (COMPLIMENTARY) Rating Symbol Value Units Collector-Base Voltage. 50 V Collector-Emitter Voltage
DUAL SURFACE MOUNT NPN/PNP TRANSISTORS (COMPLIMENTARY) This device contains two electrically-isolated complimentary pair (NPN and PNP) general-purpose transistors. This device is ideal for portable applications
BC846-AU,BC847-AU,BC848-AU,BC849-AU,BC850-AU SERIES
BC846-AU,BC847-AU,BC848-AU,BC849-AU,BC85-AU SERIES NPN GENERAL PURPOSE TRANSISTORS OLTAGE 3/45/65 olt POWER 33 mwatt FEATURES General purpose amplifier applications NPN epitaxial silicon, planar design
MMBT4401 NPN GENERAL PURPOSE SWITCHING TRANSISTOR. VOLTAGE 40 Volt POWER 225 mwatt FEATURES MECHANICAL DATA ABSOLUTE RATINGS THERMAL CHARACTERISTICS
NPN GENERAL PURPOSE SWITCHING TRANSISTOR VOLTAGE 40 Volt POWER 225 mwatt FEATURES NPN epitaxial silicon, planar design Collectoremitter voltage V CE = 40V 0.20(3.04) 0.0(2.80) 0.006(0.5)MIN. Collector
PARAMETER SYMBOL LIMIT UNITS
20V P-Channel Enhancement Mode MOSFET ESD Protected SOT-23 Voltage -20 V Current -4.3A Unit : inch(mm) Features RDS(ON), VGS@-4.5V, ID@-4.3A
20V N-Channel Enhancement Mode MOSFET ESD Protected PARAMETER SYMBOL LIMIT UNITS
20V N-Channel Enhancement Mode MOSFET ESD Protected Voltage 20 V Current 800mA SOT-523 Unit : inch(mm) Features R DS(ON), V GS@4.5V,I DS@500mA=0.4Ω R DS(ON), V GS@2.5V,I DS@300mA=0.7Ω R DS(ON), V GS@1.8V,I
PARAMETER SYMBOL LIMIT UNITS
20V P-Channel Enhancement Mode MOSFET Voltage -20 V Current -4.0A Features RDS(ON), VGS@-4.5V, ID@-4.0A
P6AF3.3A~P6AF64A. SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 3.3~64 V Power 600 W SMAF Unit: inch(mm) Features.
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 3.3~64 V Power 600 W SMAF Unit: inch(mm) Features For surface mounted applications in order to optimize board space. Ultra thin profile package for space
V DD =30V, I D =200mA, Turn-On Rise Time tr V GS =10V, Turn-Off Delay Time td (off) (Note 1,2) R G =10Ω Turn-Off Fall Time tf
60V N-Channel Enhancement Mode MOSFET ESD Protected Voltage 60 V Current 300mA SOT-23 Unit : inch(mm) Features R DS(ON), V GS @10V, I D @500mA
MMBT3904-AU NPN GENERAL PURPOSE SWITCHING TRANSISTOR. VOLTAGE 40 Volt POWER 225 mwatt FEATURES MECHANICAL DATA ABSOLUTE RATINGS
MMBT3904AU NPN GENERAL PURPOSE SWITCHING TRANSISTOR OLTAGE 40 olt POWER 225 mwatt FEATURES SOT23 Unit: inch(mm) NPN epitaxial silicon, planar design emitter voltage CE = 40 0.120(3.04) 0.110(2.80) current
P6AF3.3A-AU~P6AF64A-AU
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 3.3~64 V Power 600 W SMAF Unit: inch(mm) Features For surface mounted applications in order to optimize board space. Ultra thin profile package for space
PPJW3P10A. 100V P-Channel Enhancement Mode MOSFET. Voltage -100 V Current -2.6 A. Features. Mechanical Data
100V P-Channel Enhancement Mode MOSFET Voltage -100 V Current -2.6 A Features SOT-223 R DS(ON), V GS @-10V,I D @-2.6A
PSBT30100VYT ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER. Voltage 100 V Current 30 A. Features. Mechanical Data
ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER Voltage 100 V Current 30 A Features TO220AB Unit: inch(mm) Ultra low forward voltage drop, low power loss High efficiency operation Lead free in compliance with
PJSD05CW SERIES. Fig.130. Single Line TVS Diode for ESD Protection in Portable Electronics FEATURES MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS
Single Line TS Diode for ESD Protection in Portable Electronics OLTAGE 5 to 36 olt POWER 35 Watt FEATURES Transient protection for data lines to IE 6-4-2 (ESD) + 15k (air),+ 8k (contact).78(1.95).68(1.75)
4.0SMDJ Series. 4000W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD
SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD 4000W Surface Mount Transient Suppressors Features l Peak power dissipation 4000W @10 x 1000 us Pulse l Low profile package. l Excellent clamping capability. l
PP4SMA6.8A-AU ~ P4SMA82CA-AU Series
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 6.8~82 V Power 400 W Features ISO605(C=330 pf,r=330ω): ± 30kV Air, ± 30kV Contact HBM ± 8 kv & CDM ± 2 kv AEC-Q1 qualified Lead free in compliance with
INPAQ. Specification. Product Name Power TVS (Transient Voltage Suppressor) Series Package Size. SMDJ-T Series SMD(DO214-AB)
SMDJ-T Series Specification Product Name Power TVS (Transient Voltage Suppressor) Series Package Size SMDJ-T Series SMD(DO214-AB) SMDJ-T Series Engineering Specification 1. FEATURES 3000W Surface Mount
3.0SMCJ10-AU~3.0SMCJ150CA-AU
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 3000 Watt STAND-OFF VOLTAGE 10 to 150 V Recongnized File # E210467 Features For surface mounted applications in order to optimize board space.
6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
Green. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
P6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
P4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
BZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
Single Pulsed (Note 4) E AS 1100 mj Repetitive (Note 5) E AR 29 mj Peak Diode Recovery dv/dt (Note 5) dv/dt 15 V/ns 290 TO-3PL P D 220
500V N-Channel MOSFET Voltage 500 V Current 24A Features: R DS(ON), @,I D@ 12.0A
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
BZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
SA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
Transient Voltage Suppressors. SMDJ Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Voltage Suppressors SMDJ Series Features UNI Low profile package Matte tin lead free Plated Halogen free and RoHS compliant Low incremental surge resistance Typical IR less than 1µA
5 to 220 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 220 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space Glass passivated
200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
Green T-DFN Part Number Compliance Case Packaging LBS10-13 Commercial T-DFN ,000/Tape & Reel
Green 1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@ T A = +25 C) V RRM (V) I O (A) V F Max (V) I R Max (µa) 1000 1 1.1 5 Description and Applications The is a surface mount glass
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
ADVANCED INFORMATION
1A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Product Summary V RRM (V) I O (A) V F(MAX) (V) @ +25 C I R(MAX) (µa) @ +25 C 80 1 0.80 5 Description and Applications Features and Benefits Low Forward Voltage
B3XXAE B320AE-B345AE. Product Summary. Features and Benefits. Mechanical Data. Description and Applications NEW PRODUCT. Ordering Information (Note 4)
Green 3.0A SCHOTTKY BARRIER RECTIFIER Product Summary B320AE/B330AE/B340AE/B345AE V RRM (V) I O (A) V F(MAX) (V) I R(MAX) (ma) @ +25 C @ +25 C 20 3 0.5 0. 30 3 0.5 0.15 40 3 0.5 0.20 45 3 0.5 0.30 Features
MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
Green. Bottom View. Top View. Part Number Compliance Case Packaging SDT3A45SA-13 Commercial SMA 5,000/Tape & Reel
Green 3A TRENCH SCHOTTKY BARRIER RECTIFIER SMA Product Summary (@ T A = +25 C ) V RRM (V) I O (A) V F(MAX) (mv) I R(MAX) (µa) 45 3 480 280 Features and Benefits Low Leakage Current Soft, Fast Switching
Surface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
0.8A, 600V V Glass Passivated Bridge Rectifier
MBS6-K - MBS-K 0.8A, 600V - 00V Glass Passivated Bridge Rectifier FEATURES Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge current capability
Green. Part Number Case Packaging SBRT3U60SAF-13 SMAF 10,000/Tape & Reel
Green 3A Trench SBR TRENCH SUPER BARRIER RECTIFIER Product Summary V V RRM (V) I O (A) F(MAX) (V) I R(MAX) (ma) @ +25 C @ +25 C 60 3 0.53 0.5 Description and Applications The device is a 3A 60V single
MSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES. Series.
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series Top View Bottom View PRIMARY CHARACTERISTICS V WM 3.3 V to 5. V V BR 4.1 V to 7.7 V P PPM 15 W T J max. 15 C Polarity Uni-directional Package
200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
High Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
2A, 1000V Glass Passivated Bridge Rectifier
2A, 000V Glass Passivated Bridge Rectifier FEATURES Glass passivated junction Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge current capability
Green. Pin Diagram. Part Number Compliance Case Packaging MB10S-13 Commercial MBS 3,000/Tape & Reel
Green 0.8A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@T A = +25 C) V RRM (V) I O (A) V F (V) I R (μa) 000 0.8. 5 Description and Applications Features and Benefits Glass Passivated
500mW High Speed SMD Switching Diode
5mW High Speed SMD Switching Diode FEATURES - Designed for mounting on small surface - Extremely thin/leadless package - High mounting capability, strong surage with stand, high reliability - Pb free and
Green. Pin Diagram. Part Number Compliance Case Packaging MSB30M-13 Commercial MSBL 2,500/Tape & Reel
Green 3.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@T A = +25 C) V RRM (V) I O (A) V F (V) I R (μa) 1000 3.0 1.1 5 Features and Benefits Glass Passivated Die Construction Compact,
2N7002K. 60V N-Channel Enhancement Mode MOSFET - ESD Protected I D T A C C P D T J FEATURES MECHANICAL DATA
6 N-hannel Enhancement Mode MOFET - E Protected FEATURE R (ON), G @,I @5mA=3Ω R (ON), G @4.5,I @ma=4ω Advanced Trench Process Technology High ensity ell esign For Ultra Low On-Resistance ery Low Leakage
Green SMC. Top View Bottom View. Part Number Case Packaging B5XXCE-13 SMC 3,000/Tape & Reel
Green 5.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Product Summary B520CE/B530CE/B540CE V RRM (V) I O (A) V F Max (V) I R Max (ma) 20 5.0 0.55 0.2 30 5.0 0.55 0.2 40 5.0 0.55 0.2 Features and Benefits
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
SOD123. Top View. M5X = Product Type Marking Code YM = Date Code Marking Y = Year (ex.: E = 2017) M = Month (ex: 9 = September)
0.5A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Product Summary V F(MAX) (V) I R(MAX) (µa) V RRM (V) I O (A) @ +25 C @ +25 C 80 0.5 0.80 5 Description and Applications This is a single rectifier packaged
1SMA4737-1SMA200Z Taiwan Semiconductor
CREAT BY ART W, 7.5V - 200V Surface Mount Silicon Zener Diodes SMA4737 - SMA200Z FEATURES - Built-in strain relief - Ideal for automated placement - Glass passivated junction - Low inductance - Typical
Green. Top View Pin Diagram Internal Schematic. Part Number Case Packaging MSB12M-13 MSB 3,000/Tape & Reel
Green.2A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@T A = +25 C) V RRM (V) I O (A) V F (V) I R (µa),000.2. 5 Features and Benefits Glass Passivated Die Construction Compact, Thin
1A, 400V ESD Capability Rectifier
A, 400V ESD Capability Rectifier FEATURES High ESD capability Glass passivated chip junction Ideal for automated placement Low forward voltage drop High surge current capability Compliant to RoHS Directive
2A, 800V V Glass Passivated High Efficient Rectifier
2A, 800V - 1000V Glass Passivated High Efficient Rectifier FEATURES Glass passivated chip junction High efficiency, Low V F High current capability High surge current capability Low power loss Compliant
GPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
Green. SOD123F (Standard) Top View. Part Number Qualification Case Packaging US1GWF-7 AEC-Q101 SOD123F (Standard) 3,000/Tape & Reel
Green.0A SURFACE MOUNT ULTRA-FAST RECTIFIER Product Summary (@ T A = +25 C) V RRM (V) I O (A) V F Max (V) I R Max (µa) 400.25 Description The is a rectifier packaged in the SOD23F (Standard) package and
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty