4.0SMDJ Series. 4000W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD

Size: px

Start display at page:

Download "4.0SMDJ Series. 4000W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD"

Doreen Simmons
5 years ago
Views:

0ps from 0 Volts to BV min l IEC 61000-4-2 ESD 30KV(Air), 30KV(Contact) l ESD protection of data lines in accordance with IEC 61000-4-2 l EFT protection of data lines in accordance with IEC 61000-4-4

1 SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD 4000W Surface Mount Transient Suppressors Features l Peak power dissipation x 1000 us Pulse l Low profile package. l Excellent clamping capability. l Typical I R less than 2uA when V BR above 12V. l Glass passivated junction. l Fast response time: typically less than 1.0ps from 0 Volts to BV min l IEC ESD 30KV(Air), 30KV(Contact) l ESD protection of data lines in accordance with IEC l EFT protection of data lines in accordance with IEC l Halogen free and RoHS compliant l Lead-free finish Cathode SMC Bi-directional Anode Mechanical Characteristics Uni-directional l CASE: SMC (DO-214AB) Molded Plastic over glass passivated junction. l Mounting Position: Any l Polarity: by cathode band denotes uni-directional device, none cathode band denotes bi-directional device. l Terminal: Solder plated Maximum Ratings and 25 C Ambient Temperature (unless otherwise noted) Parameter Symbol Value Units Peak Pulse Power Dissipation on 10/1000 us Waveform (Note 1, 2, FIG.1) P PPM 4000 W Power Dissipation on Infinite Heat Sink at T L =50 C P D 6.5 W Peak Pulse of on 10/1000us Waveform (Note 1, FIG.3) I PPM See Table 1 A Peak Forward Surge, 8.3ms Single Half Sine-Wave (Note 2. 3) I FSM 300 A Operating Junction Temperature Range T J -55 to 150 C Storage Temperature Range T STG -55 to 150 C Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above T A =25 C per Fig Mounted on 8.0x8.0mm 2 (0.03mm thick) Copper Pads to each terminal. 3. Measured on 8.3ms single half sine-wave, or equivalent square wave, for Unidirectional device only. Rev. 2.0, 2-Dec.-16

2 Electrical Tamb 25 C Type Number Marking Stand- Off T I T For Bi-directional type having V RWM of 10 Volts and less, the I R limit is double. For parts without A, the V BR is ± 10% and V C is 5% higher than with A parts. Test Maximum PP Peak Pulse RMW (Uni) (Bi) (Uni) (Bi) V RMW(V) V BR MIN(V) V BR MAX(V) I T (ma) V C(V) I PP(A) I R(uA) 4.0SMDJ5.0A 4.0SMDJ5.0CA HDE IDE SMDJ6.0A 4.0SMDJ6.0CA HDG IDG SMDJ6.5A 4.0SMDJ6.5CA HDK IDK SMDJ7.0A 4.0SMDJ7.0CA HDM IDM SMDJ7.5A 4.0SMDJ7.5CA HDP IDP SMDJ8.0A 4.0SMDJ8.0CA HDR IDR SMDJ8.5A 4.0SMDJ8.5CA HDT IDT SMDJ9.0A 4.0SMDJ9.0CA HDV IDV SMDJ10A 4.0SMDJ10CA HDX IDX SMDJ11A 4.0SMDJ11CA HDZ IDZ SMDJ12A 4.0SMDJ12CA HEE IEE SMDJ13A 4.0SMDJ13CA HEG IEG SMDJ14A 4.0SMDJ14CA HEK IEK SMDJ15A 4.0SMDJ15CA HEM IEM SMDJ16A 4.0SMDJ16CA HEP IEP SMDJ17A 4.0SMDJ17CA HER IER SMDJ18A 4.0SMDJ18CA HET IET SMDJ20A 4.0SMDJ20CA HEV IEV SMDJ22A 4.0SMDJ22CA HEX IEX SMDJ24A 4.0SMDJ24CA HEZ IEZ SMDJ26A 4.0SMDJ26CA HFE IFE SMDJ28A 4.0SMDJ28CA HFG IFG SMDJ30A 4.0SMDJ30CA HFK IFK SMDJ33A 4.0SMDJ33CA HFM IFM SMDJ36A 4.0SMDJ36CA HFP IFP SMDJ40A 4.0SMDJ40CA HFR IFR SMDJ43A 4.0SMDJ43CA HFT IFT SMDJ45A 4.0SMDJ45CA HFV IFV SMDJ48A 4.0SMDJ48CA HFX IFX SMDJ51A 4.0SMDJ51CA HFZ IFZ SMDJ54A 4.0SMDJ54CA HGE IGE SMDJ58A 4.0SMDJ58CA HGG IGG SMDJ60A 4.0SMDJ60CA HGK IGK SMDJ64A 4.0SMDJ64CA HGM IGM SMDJ70A 4.0SMDJ70CA HGP IGP SMDJ75A 4.0SMDJ75CA HGR IGR

3 Type Number Marking Stand-Off T I T Test Maximum PP Peak Pulse RMW (Uni) (Bi) (Uni) (Bi) V RMW(V) V BR MIN(V) V BR MAX(V) I T (ma) V C(V) I PP(A) I R(uA) 4.0SMDJ78A 4.0SMDJ78CA HGT IGT SMDJ85A 4.0SMDJ85CA HGV IGV SMDJ90A 4.0SMDJ90CA HGX IGX SMDJ100A 4.0SMDJ100CA HGZ IGZ SMDJ110A 4.0SMDJ110CA HHE IHE SMDJ120A 4.0SMDJ120CA HHG IHG SMDJ130A 4.0SMDJ130CA HHK IHK SMDJ150A 4.0SMDJ150CA HHM IHM SMDJ160A 4.0SMDJ160CA HHP IHP SMDJ170A 4.0SMDJ170CA HHR IHR For Bi-directional type having V RWM of 10 Volts and less, the I R limit is double. For parts without A, the V BR is ± 10% and V C is 5% higher than with A parts. I-V Curve Characteristics Bi-directional Uni-directional P PPM V RWM Peak Pulse Power Dissipation - Max power dissipation Stand-off - Maximum voltage that can be applied to TVS without operation V BR Maximum voltage that flows though the TVS at a specified current (I T ) V C Clamping Peak voltage measured across the TVS at a specified I PPM (peak impulse current) I R V F Leakage measured at V R Forward Drop for Uni-directional

4 Ratings and Characteristic Curves (T A =25 C unless otherwise noted) Fig.1 - Peak Pulse Power Rating Fig.2 - Pulse Derating Cure Fig.3 Pulse Waveform Fig.4 - Typical Junction Capacitance

5 Package Outline Dimensions and Pad Layouts DO-214AB (SMC) Dim Millimeters Inches Min Max Min Max A B C D E F G H

INPAQ. Specification. Product Name Power TVS (Transient Voltage Suppressor) Series Package Size. SMDJ-T Series SMD(DO214-AB)

INPAQ. Specification. Product Name Power TVS (Transient Voltage Suppressor) Series Package Size. SMDJ-T Series SMD(DO214-AB) SMDJ-T Series Specification Product Name Power TVS (Transient Voltage Suppressor) Series Package Size SMDJ-T Series SMD(DO214-AB) SMDJ-T Series Engineering Specification 1. FEATURES 3000W Surface Mount