Symbol Description Value Unit Conditions. Minimum 600
|
|
- Beatrix Hodges
- 5 years ago
- Views:
Transcription
1 600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR For unidirectional types Typical IR less than 1 µa above 10V High temperature soldering guaranteed:250 C/10 seconds at terminals This series is UL recognized under component index. File number E RoHS Compliant Mechanical Data Case: Epoxy: JEDEC DO-214AA (SMB) molded plastic over glass passivated junction Meets UL 94V-0 flammability rating Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Mounting position: Weight: Color band denoted positive end (cathode) except Bi-directional Any ounces, gram Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value Unit Conditions PPPM IPPM Peak Pulse Power Dissipation on 10/1000 us waveform Peak Pulse current on 10/1000 us waveform Minimum 600 IFSM Peak Forward Surge 100 A TJ,TSTG Operating Junction and Storage Temperature Range W Non-repetitive current pulse, per FIG.3 and derated above TA=25 C per FIG.2 See Table A Non-repetitive current pulse -55 to 150 C 8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note 1,2) Note: 1. Mounted on 5.0mm x 5.0mm (0.03mm thick) copper pads to each terminal ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 6
2 Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Part NO. Device Marking Code Stand-off Voltage Breakdown Test. V BR Clamping IPPM Peak Pulse V WM Uni-Polar Bi-Polar Uni Bi V WM (V) Min. IT(mA) VC (V) IPPM (A) ID (μa) P6SMBJ6.8A P6SMBJ6.8CA 6V8A 6V8C /2000 P6SMBJ7.5A P6SMBJ7.5CA 7V5A 7V5C /1000 P6SMBJ8.2A P6SMBJ8.2CA 8V2A 8V2C /400 P6SMBJ9.1A P6SMBJ9.1CA 9V1A 9V1C /100 P6SMBJ10A P6SMBJ10CA 10A 10C /20 P6SMBJ11A P6SMBJ11CA 11A 11C /10 P6SMBJ12A P6SMBJ12CA 12A 12C /10 P6SMBJ13A P6SMBJ13CA 13A 13C P6SMBJ15A P6SMBJ15CA 15A 15C P6SMBJ16A P6SMBJ16CA 16A 16C P6SMBJ18A P6SMBJ18CA 18A 18C P6SMBJ20A P6SMBJ20CA 20A 20C P6SMBJ22A P6SMBJ22CA 22A 22C P6SMBJ24A P6SMBJ24CA 24A 24C P6SMBJ27A P6SMBJ27CA 27A 27C P6SMBJ30A P6SMBJ30CA 30A 30C P6SMBJ33A P6SMBJ33CA 33A 33C P6SMBJ36A P6SMBJ36CA 36A 36C P6SMBJ39A P6SMBJ39CA 39A 39C P6SMBJ43A P6SMBJ43CA 43A 43C P6SMBJ47A P6SMBJ47CA 47A 47C P6SMBJ51A P6SMBJ51CA 51A 51C P6SMBJ56A P6SMBJ56CA 56A 56C P6SMBJ62A P6SMBJ62CA 62A 62C P6SMBJ68A P6SMBJ68CA 68A 68C P6SMBJ75A P6SMBJ75CA 75A 75C P6SMBJ82A P6SMBJ82CA 82A 82C P6SMBJ91A P6SMBJ91CA 91A 91C P6SMBJ100A P6SMBJ100CA 100A 100C P6SMBJ110A P6SMBJ110CA 110A 110C P6SMBJ120A P6SMBJ120CA 120A 120C P6SMBJ130A P6SMBJ130CA 130A 130C Page 2 of 6
3 Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Part NO. Device Marking Code Stand-off Voltage Breakdown Test. V BR Clamping IPPM Peak Pulse V WM Uni-Polar Bi-Polar Uni Bi V WM (V) Min. IT(mA) VC (V) IPPM (A) ID (μa) P6SMBJ150A P6SMBJ150CA 150A 150C P6SMBJ160A P6SMBJ160CA 160A 160C P6SMBJ170A P6SMBJ170CA 170A 170C P6SMBJ180A P6SMBJ180CA 180A 180C P6SMBJ200A P6SMBJ200CA 200A 200C P6SMBJ220A P6SMBJ220CA 220A 220C P6SMBJ250A P6SMBJ250CA 250A 250C Note: For bi-directional type having VWM of 10V and less, the ID limit is double. Typical Characteristics Curves PPPM - Peak Pulse Power Dissipation (KW) Fig.1- Peak Pulse Power Rating Curve Td - Pulse Width (sec.) PPPM or IPPM, Derating in Percentage (%) Fig.2- Pulse Derating Curve Ta - Ambient Temperature ( C) Page 3 of 6
4 Fig.3- Pulse Waveform Fig.4 - Non-Repetitive Forward Surge T - Time (ms) Number of Cycles at 60Hz PM(AV) Steady State Power Dissipation (W) IPPM - Peak Pulse current (%) IFSM - Peak Forward Surge (A) Fig.5- Steady State Power Derating Curve TL - Lead Temperature ( C) CJ Junction capacitance Fig.6- Typical Junction Capacitance VWM Stand-Off Voltage (V) Page 4 of 6
5 Dimensions in inches (mm) SMB Page 5 of 6
6 How to contact us: US HEADQUARTERS WEST HARRISON PARKAWAY, VALENCIA, CA Tel: (800) TAITRON (800) (661) Fax: (800) TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP BRAZIL Tel: Fax: TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, , CHINA Tel: Fax: Page 6 of 6
20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More information5000W Surface Mount Transient Voltage Suppressor
5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent
More informationTVT05LCW TVT12LCW TVT15LCW TVT24LCW
Features Low Capacitance Unidirectional TVS This Transient Voltage Suppressor is intended to Protect Sensitive Equipment against Electrostatic Discharge and Transient Events as well to offer a Minimum
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationN-Channel Enhancement Mode Field Effect Transistor 2N7000A. Features. Mechanical Data. Maximum Ratings (T Ambient =25ºC unless noted otherwise)
Features N-Channel Enhancement Mode Field Effect Transistor High density cell design for low RDS(ON) Voltage controlled small signal switch Rugged and reliable High saturation current capability RoHS compliance
More informationN-Channel Enhancement Mode Field Effect Transistor 2N7000. Features. Mechanical Data. Maximum Ratings (T Ambient =25ºC unless noted otherwise) TO-92
Features N-Channel Enhancement Mode Field Effect Transistor High density cell design for low RDS(ON) Voltage controlled small signal switch Rugged and reliable High saturation current capability RoHS compliance
More informationEnhancement Mode MOSFET (N-Channel) 2N7002E. Features. Mechanical Data. Maximum TA=25 C unless noted otherwise SOT-23
Enhancement Mode MOSFET (N-Channel) Enhancement Mode MOSFET (N-Channel) Features High density cell design for low RDS(ON). Voltage controlled small signal switch Rugged and reliable High saturation current
More informationTHICK FILM CHIP RESISTOR GENERAL PURPOSE RC1210
THICK FILM CHIP RESISTOR GENERAL PURPOSE Features Small and light weight Excellent heat resistance and moisture resistance Suitable size and packaging for surface mount assembly RoHS Compliant Applications
More informationFor televisions, audio recorders, notebook computers, battery chargers, desktop computers and telecommunication equipment. MAX Overload Voltage
Thick Film Chip Resistor Low Ohmic Features Low Inductance Battery Charge Current Sensing Highly Reliable Multilayer Electrode Construction Higher Component and Equipment Reliability Excellent Performance
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationTSCDB52 TSCDB54 TSCDB56 TSCDB510
5A Low Profile Chip Schottky Rectifier 5A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Low power loss, High efficiency High current capability, Low voltage drop Plastic
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More information1.5A Adjustable Positive Voltage Regulator TL A Adustable Positive Voltage Regulator. General Description. Features. Ordering Information
1.5A Adjustable Positive Voltage Regulator 1.5A Adustable Positive Voltage Regulator General Description The is adjustable 3-terminal positive voltage regulator capable of supplying in excess of 1.5A over
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL
More information3mm Dome Power LED TLH-X1W3-ZTDG. 3mm Dome Power LED. Features. Applications. Device Selection Guide. High Luminance. Low profile
3mm Dome Power LED Features High Luminance Low profile Low thermal resistance Design for high current operation RoHS compliance Piranha Applications Automotive exterior lighting Electronic signs and signals
More information1A Standard Negative Voltage Regulator LM79XX. General Description. Features. Applications
1A Standard Negative Voltage Regulator 1A Standard Negative Voltage Regulator General The series is three terminal standard negative voltage regulator designed for a wide range of applications that required
More information0805 PACKAGE CHIP LED TSP2-XF2012A3
0805 Package Chip LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-color type RoHS compliance
More information800V/4A N-Channel MOSFET MSK4N80T/F 800V/4A. N-Channel MOSFET. General Description. Features. Pin Configuration TO-220 TO-220F
800V/4A N-Channel MOSFET 800V/4A N-Channel MOSFET General Description Fast switching time Low on resistance, low gate charge Excellent avalanche characteristics Suitable for active power factor correction
More information3mm Dome Power LED TLH-Q1W QS. 3mm Dome Power LED. Features. Descriptions. Applications. Device Selection Guide
3mm Dome Power LED Features High flux output Low profile Low thermal resistance Design for high current operation Packaged in Tubes for use with automatic insertion equipment Piranha Descriptions This
More informationTHICK FILM CHIP RESISTOR Anti-Sulfurated RCA0402~RCA2512
THICK FILM CHIP RESISTOR Anti-Sulfurated RCA0402~RCA2512 Thick Film Chip Resistor Anti-Sulfurated Features High performance to prevent Sulfuration in a Sulfur containing environment Small Size and light
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationFull Color Top View LED TFRJ-QTBHT5050CG-B2. Full Color Top View LED. Features. Descriptions. Applications. Device Selection Guide
Full Color Top View LED Features Super-luminosity chip LED. White SMT package. Built in red, green and blue chips Lead frame package with individual 6 pins. Wide viewing angle Soldering methods: IR reflow
More information1 W High Power LED TPLG-WR7171LS-H11-1H. 1 W High Power Cool White LED. Features. Applications. Device Selection Guide
1 W High Power LED 1 W High Power Cool White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationTop View with Super Blue LED TSRJ-BT3528B9
Features PLCC-2 package. White package Optical indicator and colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic
More informationTop View with White LED TSRJ-WT3528B9
Features PLCC-2 package. White package Optical indicator and colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic
More informationFull Color Chip LED with Right Angle Lens TFPR-QTB1FA2714. Full Color Chip LED With Right Angle Lens. Features. Applications.
Full Color Chip LED with Right Angle Lens Full Color Chip LED With Right Angle Lens Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationTop View with Cool White LED TSRJ-WT3227-V2W1
Features Fluorescence type High luminous intensity High Efficiency Emission color: x=0.29, y=0.30 ESD protection RoHS M3227 Descriptions This white LED which was fabricated using a blue LED and a phosphor,
More informationEnhancement Mode MOSFET (N-Channel) 2N7002K. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) SOT-23
Enhancement Mode MOSFET (N-Channel) Enhancement Mode MOSFET (N-Channel) Features ESD Protected 2000V High density cell design for low R DS(ON) Voltage controlled small signal switch Rugged and reliable
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More information1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) TCDU1WW. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)
1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) 1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) Features Sintered glass passivated (SGP ) rectifier chip Low Profile with Chip Package
More information0603 Package 0.8mm Height Flat Top White LED TSP1-WF1608H8-NPY. Features. Descriptions. Applications. Device Selection Guide
0603 Package 0.8mm Height Flat Top White LED 0603 Package 0.8mm Height Flat Top White LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared
More informationTHICK FILM CHIP RESISTOR GENERAL PURPOSE RC0201J/F~RC2512J/F
THICK FILM CHIP RESISTOR GENERAL PURPOSE RC0201J/F~RC2512J/F Thick Film Chip Resistor General Purpose Features Small Size and light weight Excellent heat resistance and moisture resistance Highly reliable
More informationSMCJ5.0CA Thru SMCJ170CA
Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More information0805 Package 0.8mm Height True Green LED TSP1-TF2012H8-R1S2. Features. Descriptions. Applications. Device Selection Guide
0805 Package 0.8mm Height True Green LED 0805 Package 0.8mm Height True Green LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTerminals: Pure Tin plated (Lead-Free), solderable per MIL-STD-750, Method 2026 TCDU 1JW TCDU 1KW. 1.0 A See Fig A. 50 µa TA=125 C.
1.0A Sintered Glass Passivated Ultra Fast Low Profile Rectifier (SGP ) 1DW 1MW 1.0A Sintered Glass Passivated Ultra Fast Low Profile Rectifier (SGP ) Features Qualified to AEC-Q101 standards for high reliability
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
More informationEnhancement Mode MOSFET (Double N-Channel) 2N7002KDWS. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) SOT-363
Enhancement Mode MOSFET (Double N-Channel) Enhancement Mode MOSFET (Double N-Channel) Features Advanced Trench Process Technology High density cell design for low R DS(ON) Very low leakage current in off
More informationOPTO INTERRUPTER TQIL-BTS
OPTO INTERRUPTER Opto Interrupter Features Wide gap between light emitter and detector (3.8mm) High sensing accuracy PWB mounting type package Applications Copier Printer Facsimile Ticket vending machine
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationLow Power Low Offset Voltage Dual Comparator. LM393A/B Series. General Description. Features. Applications
Low Power Low Offset Voltage Dual Comparator Low Power Low Offset Voltage Dual Comparator General Description The LM393A/B series consist of two independent precision voltage comparators with a typical
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationLow Power Quad Operational Amplifier. LM324A/B Series. Low Power Qaud Operational Amplifier. General Description. Features.
Low Power Quad Operational Amplifier Low Power Qaud Operational Amplifier General Description The LM324A/B series consist of four independent, high gain and internally frequency compensated operational
More informationThe LM78xxA series is available in 7 fixed output voltage:5v,6v,8v,9v,12v,15v and 18V.
1A Standard Positive Voltage Regulator 1A Standard Positive Voltage Regulator General Description The series is three terminal standard positive voltage regulator designed for a wide range of applications
More information2.0A Low Profile Chip Schottky Rectifier TSCDA24LH. Features. Application. Mechanical Data
2.0A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Lead-free solder joint, no wire bond & lead frame Low power loss, High efficiency High current capability, Low voltage
More informationLow Power Low Offset Voltage Quad Comparator. LM339A/B Series. General Description. Features. Applications
Low Power Low Offset Voltage Quad Comparator Low Power Low Offset Voltage Quad Comparator General Description The LM339A/B series consist of four independent precision voltage comparators with a typical
More information1A Low Dropout Positive Voltage Regulator. LM2940 Series. General Description. Features. Ordering Information
1A Low Dropout Positive Voltage Regulator 1A Low Dropout Positive Voltage Regulator General Description The LM2940 is a low dropout regulator designed to provide output current up to 1A with a typically
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationP6SMB Transient Voltage Suppressor Diode Series
P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationSmall Signal General Purpose Transistors (PNP) BC556/BC557/BC558. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Small Signal General Purpose Transistors (PNP) Small Signal General Purpose Transistors (PNP) Features PNP Silicon Epitaxial Planar Transistor for Switching and Amplifier Applications RoHS compliance Mechanical
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More informationM C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP-600. Mechanical Dimensions:In Inches (mm) China - Germany - Korea - Singapore - United States - smc-diodes.
Features: Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass Passivated Junction 15000W Peak Pulse Power Capability on 10/1000 μs waveform Voltage-17.0 to 280 Volts Excellent
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationAdjustable Precision Shunt Voltage Regulator LA431A LA431B. Adjustable Precision Shunt Regulator. General Description.
Adjustable Precision Shunt Voltage Regulator Adjustable Precision Shunt Regulator General Description LA431A and LA431B are three terminal Adjustable PrecisionShunt Regulators, With guaranteed thermal
More information150mA Ultra Low Dropout Voltage Regulator. LM2204 Series. General Description. Features. Applications
150mA Ultra Low Dropout Voltage Regulator 150mA Ultra Low Dropout Voltage Regulator General Description The LM2204 series is a positive voltage regulator IC fabricated by high voltage EPNP process. The
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationDO-15 China - Germany - Korea - Singapore - United States - smc-diodes.com
P6KE SERIES TRANSIENT VOLTAGE SUPPRESSOR Features: Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 6.8V- 440V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability
More informationSMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features SMA Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions
More informationBZW04 Series. Features: DO-41. Mechanical Data. Page <1> 14/05/08 V1.1
DO-41 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 400W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low impedancesurge resistance.
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationMCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.
Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent
More information50V/5.3A P-Channel Power MOSFET MSS5P05D / MSS5P05U. General Description. Features. Pin Configuration DPAK (TO-252) IPAK (TO-251) MSS5P05U MSS5P05D
50V/5.3A P-Channel Power MOSFET 50V/5.3A P-Channel Power MOSFET General Description Low on resistance Improved inductive ruggedness Fast switching time Rugged polysilicon gate cell structure Lower input
More informationSMBJ5.0 THRU SMBJ440CA
SMBJ5.0 THRU SMBJ440CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off : 5.0-440 Volts Peak pulse power: 600 Watts 0.087 (2.20) 0.071 (1.80) 0.096(2.44) 0.084(2.13) SMB/DO-214AA 0.180(4.57) 0.160(4.06)
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
SMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features: Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation 5.0V- 170V Standoff Voltage Uni- and Bi-Directional Versions Available
More informationStandard 12A Silicon Controlled Rectifier TCR12FWMT. Features. Mechanical Data. Maximum Ratings
Standard 12A Silicon Controlled Rectifier Standard 12A Silicon Controlled Rectifier Features Sensitive gate triggering with low gate current drive Glass Passivated die junctions High surge current capability
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More information