3mm Dome Power LED TLH-X1W3-ZTDG. 3mm Dome Power LED. Features. Applications. Device Selection Guide. High Luminance. Low profile

Transcription

1 3mm Dome Power LED Features High Luminance Low profile Low thermal resistance Design for high current operation RoHS compliance Piranha Applications Automotive exterior lighting Electronic signs and signals Special lighting application Decoration Channel Letter Device Selection Guide Part No. Material Chip Emitted Color Lens Color AlInGaP Super Yellow Water Clear TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 8

2 Absolute Maximum Ratings (Ta=25 C) Parameter Symbol Value Unit Reverse Voltage VR 10 V Average Forward Current (Note.1) IF 70 ma Peak Forward Current (Note.2) IFP 100 ma Power Dissipation Pd 182 mw Operating Temperature (Note.1) Topr -40 ~ +100 C Storage Temperature Tstg -40 ~ +100 C LED Junction Temperature TJ 125 C Soldering Condition (Note.3) Tsol 260 C / 5 seconds Notes: 1. Design of heat dissipation should be considered, the allowable operating current at different operation temperature, please take reference from Fig.4 on page Duty ratio=1/10, pulse width=0.1ms 3. 3mm (0.118 ) away from epoxy. Electro-Optical Characteristics (Ta=25 C) Parameter Symbol Min. Typ. Max. Unit Condition Total Luminous Flux (Note.2) ΦV mlm Luminous Intensity/Total Flux IV/ΦV mcd/mlm Viewing Angle 2θ1/ deg Total Included Angle (Note.1) θ deg IF =70mA Dominant wavelength λd nm Spectrum Radiation Bandwidth Δλ nm Forward Voltage (Note.4) VF V Reverse Current IR μa VR=10V Thermal Resistance θj-a C/W Thermal Resistance θj-l C/W IF =70mA Notes: 1.Viewing angle 0.9V is the included angle at which 90% of total luminous flux is captured. 2. Measurement uncertainty of total flux: ±15% 3. Measurement uncertainty of the chromatic coordinates: ± Measurement uncertainty of Forward Voltage: ±0.05V Page 2 of 8

3 Typical Electro-Optical Characteristics Curves (Ta=25 C) Relative Luminous Intensity (%) Relative Luminous Intensity (%) Fig.1 Relative Intensity vs. Wavelength Wavelength (nm) Fig.3 Relative Intensity at 70mA vs. Ambient Temperature Ambient Temperature Ta ( C) Forward Current IF (ma) Fig. 2 Forward Current vs. Forward Voltage Forward Voltage (V) Fig.4 Forward Current vs. Ambient Temperature Forward Current IF (ma) Ambient Temperature Ta ( C) Relative Luminous Intensity (%) Fig.5 Relative Intensity vs. Forward Current Forward Current IF (ma) Fig.6 Radiation Diagram Page 3 of 8

4 Package Dimensions (In mm) 1. in millimeters, and tolerance is ±0.2mm unless otherwise noted. 2. Protruded resin under bottom surface of epoxy is 1.5mm max. 3. Lead spacing is measured where the leads emerge from the package. Page 4 of 8

5 Packing Information Packing Type PCS per Tube PCS Per Inner Box PCS Per Carton Tube 60 3,000 18,000 Page 5 of 8

6 Ordering Information TL H X 1 W 3 ZTDG 88 TU Lead Free Tube Factory location code Frame Structure Code 3mm Dome (Piranha), 7.62x7.62mm Super Flux, Piranha Water Clear Super Yellow Color Super Bright Taitron LED Lamp Page 6 of 8

7 Rank Combinations Bin Range of Total Flux Bin Code Min. Max. Unit Condition 2C* D mlm IF=70 ma 2E F* Bin Range of Forward Voltage Bin Code Min. Max. Unit Condition A B C D V IF=70 ma Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition Y Y Y nm IF=70 ma Notes: Tolerance of Luminous Intensity: ±15% Tolerance of Forward Voltage: ±0.05V Tolerance of Dominant Wavelength ±1.0nm *Bin with less distribution Page 7 of 8

8 How to contact us US HEADQUARTER WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800) TAITRON (800) (661) Fax: (800) TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP BRAZIL Tel: Fax: TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN AN ROAD, SUITE 1503, SHANGHAI , CHINA. Tel: Fax: Page 8 of 8