3mm Dome Power LED TLH-Q1W QS. Features. Descriptions. Applications. Device Selection Guide

Transcription

1 3mm Dome Power LED Features High flux output Low profile Low thermal resistance Design for high current operation Packaged in Tubes for use with automatic insertion equipment RoHS Compliance Piranha Descriptions This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-currentcapabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance. Applications Automotive Exterior Lighting Electronic Signs and Signals Channel Letter Special Lighting application Device Selection Guide Part No. Material Chip Emitted Color Lens Color AlInGaP Super Red Water Clear TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 8

2 Absolute Maximum Ratings (Ta=25 C ) Parameter Symbol Value Unit Reverse Voltage VR 5 V Continuous Forward Current IF 70 ma Peak Forward Current IFP 160 ma Power Dissipation Pd 220 mw LED junction Temperature TJ 125 C Soldering Temperature (Note.1) Tsol 260 ± 5 C Operating Temperature Topr -40 ~ +100 C Storage Temperature Tstg -40 ~ +100 C Note 1: Soldering time 5 seconds Electro-Optical Characteristics (Ta=25 C ) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Flux Фv mlm Viewing Angle 2θ1/ deg Peak wavelength λp nm IF =70mA Dominant wavelength λd nm Spectrum Radiation Bandwidth Δλ nm Forward Voltage VF V Reverse Current IR μa VR=5V Notes: Tolerance of Luminous Flux: ±15% Tolerance of Forward Voltage: ±0.1V Tolerance of Dominant Wavelength ±1.0nm Page 2 of 8

3 Relative Intensity (a.u.) Relative Luminous Intensity Forward Current IF (ma) Relative Luminous Intensity Forward Current IF (ma) 3mm Dome Power LED Typical Electro-Optical Characteristics Curves (Ta=25 C ) Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage Wavelength (nm) Relative Intensity vs. Forward Current Forward Voltage (V) Forward Current vs. Ambient Temp Forward Current (ma) Ambient Temperature Ta ( C ) Radiation Diagram Viewing angle (degree) Page 3 of 8

4 Package Dimensions (In mm) Notes: 1. All dimensions are in millimeters, and tolerance is 0.25mm without special declared. 2. An epoxy meniscus may extend about 1.5mm (0.059") down the lead. Packing Information Packing Type PCS per Tube PCS Per Inner Box PCS Per Carton Tube 60 1,800 21,600 Page 4 of 8

5 Packing Specification 1. Tube 2. Inner Box 3. Carton (out box) Page 5 of 8

6 Ordering Information TL H Q 1 W QS 92 TU Lead Free Tube Factory Location Code Rank Code Frame Structure Code 3mm Dome (Piranha), 7.62x7.62mm Super Flux, Piranha Water Clear Super Red Color Super Bright Taitron LED Lamp Label Explanation 1) Tube Label CAT: Ranks of Forward Voltage, Dominant Wavelength and Total Flux 2) Box Label CAT: Ranks of Forward Voltage, Dominant Wavelength and Total Flux HUE: Reference REF: Reference Page 6 of 8

7 Rank Combinations Bin Range of Luminous Flux Bin Code Min. Max. Unit Condition Q R S mlm IF=70 ma Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition nm IF=70 ma Bin Range of Forward Voltage Bin Code Min. Max. Unit Condition V IF=70 ma Notes: Tolerance of Luminous Flux: ±15% Tolerance of Forward Voltage: ±0.1V Tolerance of Dominant Wavelength ±1.0nm Page 7 of 8

8 How to contact us USA HEADQUARTERS WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH 6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C. Tel: Fax: TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION SUITE 1503, METROBANK PLAZA, 1160 WEST YAN AN ROAD, SHANGHAI, , CHINA Tel: Fax: Page 8 of 8