Technical Data Sheet 5mm Infrared LED, T-1 3/4

Transcription

1 Technical Data Sheet 5mm Infrared LED, T-1 3/4 Features High reliability High radiant intensity Peak wavelength λp=940nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain within RoHS compliant version. Descriptions EVERLIGHT S Infrared Emitting Diode() is a high intensity diode, molded in a water clear plastic package. The device is spectrally matched with phototransistor, photodiode and infrared receiver module. Applications Free air transmission system Infrared remote control units with high power requirement Smoke detector Infrared applied system Device Selection Guide Chip Part No. Lens Color Material IR GaAlAs Water clear Everlight Electronics Co., Ltd. Rev.2 Page: 1 of 6

2 Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Units Continuous Forward Current I F 100 ma Peak Forward Current(*1) I FP 1.0 A Reverse Voltage V R 5 V Operating Temperature T opr -40 ~ +85 Storage Temperature T stg -40 ~ +100 Soldering Temperature(*2) T sol 260 Power Dissipation at(or below) 25 Free Air Temperature P d 150 mw Notes: *1:I FP Conditions--Pulse Width 100μs and Duty 1%. *2:Soldering time 5 seconds. Everlight Electronics Co., Ltd. Rev.2 Page: 2 of 6

3 Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Condition Min. Typ. Max. Units I F =20mA Radiant Intensity Ie I F =100mA Pulse Width 100μs,Duty 1% I F =1A Pulse Width 100μs,Duty 1% mw/sr Peak Wavelength λp I F =20mA nm Spectral Bandwidth Δλ I F =20mA I F =20mA I F =100mA Forward Voltage V F I F =1A Pulse Width 100μs,Duty 1% Pulse Width 100μs,Duty 1% Reverse Current I R V R =5V μa View Angle 2θ1/2 I F =20mA deg nm V Rank Condition I F =20mA Unit mw/sr Bin Number Bin3-1 Bin3-2 Bin4-1 Bin4-2 Bin5-1 Bin5-2 Bin6-1 Bin6-2 Min Max Tolerance of Radiant Intensity: ±5% Everlight Electronics Co., Ltd. Rev.2 Page: 3 of 6

4 Typical Electro-Optical Characteristics Curves Fig.1 Forward Current vs. Fig.2 Spectral Distribution Ambient Temperature IF=20mA Ta=25 C Fig.3 Peak Emission Wavelength vs. Ambient Temperature 980 Fig.4 Forward Current vs. Forward Voltage Everlight Electronics Co., Ltd. Rev.2 Page: 4 of 6

5 Typical Electro-Optical Characteristics Curves Fig.5 Radiant Relative Intensity vs. Fig.6 Relative Radiant Intensity vs. Forward Current Angular Displacement Ie-Radiant Intensity(mW/sr) IF-Forward Current (ma) Everlight Electronics Co., Ltd. Rev.2 Page: 5 of 6

6 Packing Quantity Specification 1.500PCS/1Bag 5Bags/1Box 2.10Boxes/1Carton Label Form Specification CPN: Customer s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number X: Month Reference: Identify Label Number Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don t reproduce or cause anyone to reproduce them without EVERLIGHT s consent. EVERLIGHT ELECTRONICS CO., LTD. Tel: , Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: , , Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Rev.2 Page: 6 of 6