Full Color PLCC4 LED. OVSARGB3R8 x x x x x x. Product Photo Here

Transcription

1 Full Color PLCC4 LED Surface mount device packaged in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder Pb-free, RoHS-compliant Dimensions: mm 120 viewing angle Product Photo Here The provides full color light output from a single package, 3-die design. This surface mount package is an efficient solution in modular applications that require uniform brightness and color-on-demand. Light output is optimized by an interior reflector and the wide viewing angle adds fleibility for applications ranging from hand-held appliances to automotive interiors. Applications RGB+White Full-color Indoor and Outdoor Displays Backlighting Coupling into Lightguides Automotive Interiors Entertainment Equipment Part Number Chip Type Material Emitted Color Intensity Typ. mcd R AlInGaP Red 300 G InGaN Green 450 B InGaN Blue 110 Lens Color Water Clear RoHS 1,3,4 CATHODE 2 ANODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. Data is subject to change without prior notice. OPTEK Technology Inc Wallace Drive, Carrollton, Teas Page 1

2 Absolute Maimum Ratings T A = 25 o C unless otherwise noted PARAMETER RATING R G B UNIT Storage Temperature -40 ~ +100 C Operating Temperature -40 ~ +100 C Reverse Voltage 5 V Continuous Forward Current ma Peak Forward Current (10% Duty Cycle, PW sec) ma Power Dissipation mw Junction Temperature C Junction/ambient (1 chip on 2 ) C/W Junction/ambient (3 chips on 2 ) C/W Junction/solder point (1 chip on) C/W Junction/solder point (3 chips on) C/W Notes: 1. Single color light 2. Rth test condition: Mounted on PC Board FR 4 (pad size 2 ) Electrical Characteristics T A = 25 o C unless otherwise noted SYMBOL PARAMETER VALUES R G B UNIT CONDITIONS I V Luminous Intensity Min Typ mcd I F = 20mA V F Forward Voltage Typ Ma V I F = 20mA I R Reverse Current (ma) µa V R = 5V D Dominant Wavelength nm I F = 20mA P Wavelength at Peak Emission nm I F = 20mA 2 ½ 50% Power Angle deg I F = 20mA Spectrum Radiation Bandwidth nm I F = 20mA Page 2 OPTEK Technology Inc Wallace Drive, Carrollton, Teas 75006

3 Standard Bins (I F =20mA) Lamps are sorted to luminous intensity (I V ) and dominant wavelength ( D ) bins shown. Orders for may be filled with any or all bins contained as below. RED Luminous Intensity (mcd) T 180 S 612 Dominant Wavelength (nm) 625 Luminous intensity is at S bin or above. GREEN Luminous Intensity (mcd) U 280 T 520 Dominant Wavelength (nm) 540 Luminous intensity is at T bin or above. BLUE Luminous Intensity (mcd) R 71 Q 460 Dominant Wavelength (nm) 480 Luminous intensity is at Q bin or above. Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1nm. 4. Tolerance of measurement of V F is ±0.05V. OPTEK Technology Inc Wallace Drive, Carrollton, Teas Page 3

4 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Dominant Wave Length V F(V) Forward Current vs. Forward Voltage V F(V) Percent (%) Percent (%) Relative Luminous Intensity vs. Forward Current Page 4 OPTEK Technology Inc Wallace Drive, Carrollton, Teas 75006

5 Typical Electro-Optical Characteristics Curves 1 Chip On 3 Chips On T A( C) T A( C) Maimum Forward DC Current vs. Solder Point Temperature 1 Chip On 3 Chips On T A( C) T A( C) Maimum Forward DC Current vs. Ambient Temperature 50% Power Angle: 120 Far Field Pattern OPTEK Technology Inc Wallace Drive, Carrollton, Teas Page 5

6 CIE Graph The color coordinates of the mied light can be epected within the area of the color triangle marked a). The achromatic point ( =0.33, y=0.33) is marked +. Page 6 OPTEK Technology Inc Wallace Drive, Carrollton, Teas 75006

7 Reel Dimensions (7 Inch) Carrier Tape Dimensions: Loaded Quantity 2000 PCS per Reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK Technology Inc Wallace Drive, Carrollton, Teas Page 7

8 Issue Change Description Approval Date 1.0 Initial Release J. Haynie 6/30/05 Page 8 OPTEK Technology Inc Wallace Drive, Carrollton, Teas 75006