1.5SMCJ SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
|
|
- Ashley Allison
- 6 years ago
- Views:
Transcription
1 .SMCJ SERIES W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction W Peak Pulse Power Dissipation B.V 44V Standoff Voltage Uni- and Bi- Versions Available D Excellent Clamping Voltage A Typical Response Time < ns F Plastic Case Material has UL Flammability Classification Rating 94V- C H G E Mechanical Data Case: SMC/DO-24AB, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-7, Method 226 Polarity: Cathode Band Except Bi- Marking: Device Code Weight:.2 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add -LF Suffix to Part Number, See Page 6 SMC/DO-24AB Dim Min Max A B C D.2.3 E F G..23 H All Dimensions in mm Maximum Ratings and Electrical A =2 C unless otherwise specified Characteristic Symbol Value Unit Peak Pulse Power Dissipation on /µs Waveform (Note, 2, ) PPPM W Peak Pulse on /µs Waveform (Note ) IPPM See Table A Peak Forward Surge (Note 2, 3) IFSM 2 A Maximum Instantaneous Forward Voltage at A (Note 3, 4) VF 3. /. V Power Dissipation on Infinite Heatsink at T A = C PD 6. W Typical Thermal Resistance, Junction to Ambient (Note 2) Typical Thermal Resistance, Junction to Lead (Note 2) R JA R JL 7 C/W Operating and Storage Temperature Range TJ, TSTG - to + C Note:. Non-repetitive current pulse per Figure and derated above T A = 2 C per Figure. 2. Mounted on 8. x 8.mm copper pads to each terminal. 3. Measured on 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. For uni-directional devices only. 4. V F < 3.V for V BR 2V and V F <.V for V BR 2V.. Peak pulse power waveform is /µs. Won-Top Electronics Co., Ltd. Revision: September, 22
2 .SMCJ SERIES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT IFSM, PEAK FORWARD SURGE CURRENT (A) Single Half-Sine-Wave JEDEC Method T A, AMBIENT TEMPERATURE ( C) Fig. Pulse Derating Curve NUMBER OF CYCLES AT 6Hz Fig. 2 Forward Surge Derating Curve PD, STEADY STATE POWER DISSIPATION (W) T A = C P D = 6.W PPK, PEAK POWER (kw) T A = 2 C Non Repetitive Pulse Waveform Shown in Fig T A, AMBIENT TEMPERATURE ( C) Fig. 3 Steady State Power Derating Curve.. t d, PULSE WIDTH (µs) Fig. 4 Pulse Rating Curve IPPM, PEAK PULSE CURRENT (%) t r = µs t d Peak Value I PPM Half Value I PP /2 T A = 2 C Pulse Width (t d ) is defined as the point where the peak current decays to % of I PPM /µs Waveform as defined by R.E.A. CJ, JUNCTION CAPACITANCE (pf) V RWM T J = 2 C f = MHz V sig = mv p-p Zero Bias V RWM Zero Bias t, TIME (ms) Fig. Pulse Waveform V BR, BREAKDOWN VOLTAGE (V) Fig. 6 Typical Junction Capacitance Won-Top Electronics Co., Ltd. 2 Revision: September, 22
3 Won-Top Electronics Co., Ltd. Revision: September, 22 3 Electrical Characteristics (@T A =2 C unless otherwise specified) Table Device Marking Code Breakdown Voltage V BR T Uni- Bi- UNI BI Stand-Off Voltage V RWM (V) Min. Max. Test I T (ma) Maximum Clamping PP V C (V) Peak Pulse I PP (A) RWM I R (µa).smcj..smcj.a.smcj6..smcj6.a.smcj.c.smcj.ca.smcj6.c.smcj6.ca GDD GDE GDF GDG BDD BDE BDF BDG SMCJ6..SMCJ6.A.SMCJ7..SMCJ7.A.SMCJ6.C.SMCJ6.CA.SMCJ7.C.SMCJ7.CA GDH GDK GDL GDM BDH BDK BDL BDM SMCJ7..SMCJ7.A.SMCJ8..SMCJ8.A.SMCJ7.C.SMCJ7.CA.SMCJ8.C.SMCJ8.CA GDN GDP GDQ GDR BDN BDP BDQ BDR SMCJ8..SMCJ8.A.SMCJ9..SMCJ9.A.SMCJ8.C.SMCJ8.CA.SMCJ9.C.SMCJ9.CA GDS GDT GDU GDV BDS BDT BDU BDV SMCJ.SMCJA.SMCJ.SMCJA.SMCJC.SMCJCA.SMCJC.SMCJCA GDW GDX GDY GDZ BDW BDX BDY BDZ SMCJ2.SMCJ2A.SMCJ3.SMCJ3A.SMCJ2C.SMCJ2CA.SMCJ3C.SMCJ3CA GED GEE GEF GEG BED BEE BEF BEG SMCJ4.SMCJ4A.SMCJ.SMCJA.SMCJ4C.SMCJ4CA.SMCJC.SMCJCA GEH GEK GEL GEM BEH BEK BEL BEM SMCJ6.SMCJ6A.SMCJ7.SMCJ7A.SMCJ6C.SMCJ6CA.SMCJ7C.SMCJ7CA GEN GEP GEQ GER BEN BEP BEQ BER SMCJ8.SMCJ8A.SMCJ2.SMCJ2A.SMCJ8C.SMCJ8CA.SMCJ2C.SMCJ2CA GES GET GEU GEV BES BET BEU BEV SMCJ22.SMCJ22A.SMCJ24.SMCJ24A.SMCJ22C.SMCJ22CA.SMCJ24C.SMCJ24CA GEW GEX GEY GEZ BEW BEX BEY BEZ SMCJ26.SMCJ26A.SMCJ28.SMCJ28A.SMCJ26C.SMCJ26CA.SMCJ28C.SMCJ28CA GFD GFE GFF GFG BFD BFE BFF BFG SMCJ3.SMCJ3A.SMCJ33.SMCJ33A.SMCJ3C.SMCJ3CA.SMCJ33C.SMCJ33CA GFH GFK GFL GFM BFH BFK BFL BFM SMCJ36.SMCJ36A.SMCJ4.SMCJ4A.SMCJ36C.SMCJ36CA.SMCJ4C.SMCJ4CA GFN GFP GFQ GFR BFN BFP BFQ BFR SMCJ43.SMCJ43A.SMCJ4.SMCJ4A.SMCJ43C.SMCJ43CA.SMCJ4C.SMCJ4CA GFS GFT GFU GFV BFS BFT BFU BFV SMCJ48.SMCJ48A.SMCJ.SMCJA.SMCJ48C.SMCJ48CA.SMCJC.SMCJCA GFW GFX GFY GFZ BFW BFX BFY BFZ SMCJ4.SMCJ4A.SMCJ8.SMCJ8A.SMCJ4C.SMCJ4CA.SMCJ8C.SMCJ8CA GGD GGE GGF GGG BGD BGE BGF BGG *For bi-directional devices V RWM V, the I R limit is double..smcj SERIES
4 Won-Top Electronics Co., Ltd. 4 Revision: September, 22 Electrical Characteristics (@T A =2 C unless otherwise specified) Table (Cont d) Device Marking Code Breakdown Voltage V BR T Uni- Bi- UNI BI Stand-Off Voltage V RWM (V) Min. Max. Test I T (ma) Maximum Clamping PP V C (V) Peak Pulse I PP (A) RWM I R (µa).smcj6.smcj6a.smcj64.smcj64a.smcj6c.smcj6ca.smcj64c.smcj64ca GGH GGK GGL GGM BGH BGK BGL BGM SMCJ7.SMCJ7A.SMCJ7.SMCJ7A.SMCJ7C.SMCJ7CA.SMCJ7C.SMCJ7CA GGN GGP GGQ GGR BGN BGP BGQ BGR SMCJ78.SMCJ78A.SMCJ8.SMCJ8A.SMCJ78C.SMCJ78CA.SMCJ8C.SMCJ8CA GGS GGT GGU GGV BGS BGT BGU BGV SMCJ9.SMCJ9A.SMCJ.SMCJA.SMCJ9C.SMCJ9CA.SMCJC.SMCJCA GGW GGX GGY GGZ BGW BGX BGY BGZ SMCJ.SMCJA.SMCJ2.SMCJ2A.SMCJC.SMCJCA.SMCJ2C.SMCJ2CA GHD GHE GHF GHG BHD BHE BHF BHG SMCJ3.SMCJ3A.SMCJ.SMCJA.SMCJ3C.SMCJ3CA.SMCJC.SMCJCA GHH GHK GHL GHM BHH BHK BHL BHM SMCJ6.SMCJ6A.SMCJ7.SMCJ7A.SMCJ6C.SMCJ6CA.SMCJ7C.SMCJ7CA GHN GHP GHQ GHR BHN BHP BHQ BHR SMCJ8.SMCJ8A.SMCJ9.SMCJ9A.SMCJ8C.SMCJ8CA.SMCJ9C.SMCJ9CA GHS GHT GHU GHV BHS BHT BHU BHV SMCJ2A.SMCJ22A.SMCJ2A.SMCJ3A.SMCJ2CA.SMCJ22CA.SMCJ2CA.SMCJ3CA GHX GIE GIF GIG BHX BIE BIF BIG SMCJ3A.SMCJ4A.SMCJ44A.SMCJ3CA.SMCJ4CA.SMCJ44CA GIH GIK GIL BIH BIK BIL SMCJ SERIES
5 .SMCJ SERIES MARKING INFORMATION RECOMMENDED FOOTPRINT xx.6 MIN (.2 MIN).2 MIN (3.7 MIN) Cathode = Polarity Band Except Bi- Types xx = Device Code, See Table.8 MAX (4.69 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 33mm 8mm 6mm Product ID Label 6mm 4mm.6mm Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 33 3, 34 x 337 x 4 6, 37 x 37 x 42 48, 9. Note:. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 48- and Won-Top Electronics Co., Ltd. Revision: September, 22
6 .SMCJ SERIES ORDERING INFORMATION Product No. Package Type Shipping Quantity.SMCJxx-T3 SMC 3/Tape & Reel. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. 2. To order RoHS / Lead Free version (with Lead Free finish), add -LF suffix to part number above. For example,.smcj.-t3-lf. and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 86, Taiwan Phone: or Fax: sales@wontop.com Internet: We power your everyday. Won-Top Electronics Co., Ltd. 6 Revision: September, 22
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationFeatures. Applications. Agency Approval. Mechanical and Physical Data. Maximum Ratings and Thermal Characteristics. Part Number Code SMCJ C A -
Features Plastic package, excellent insulation strength. Glass passivated chip junction in SMC package. Excellent voltage clamping capability. Low Zener impedance. 1500W peak pulse power capability on
More informationTransient Voltage Suppression Diodes: SMCJ Series SMD Type 1500 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSMCJ Series. 1500W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD. Features. Mechanical Characteristics
4 SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD SMCJ Series 1500W Surface Mount Transient Suppressors Features l Peak power dissipation 1500W @10 x 1000 us Pulse l Low profile package. l Excellent clamping
More information1500W, 5V - 170V Surface Mount Transient Voltage Suppressor
1500W, 5V - 170V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More informationZetron Research. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. SMCJ Series. SMCJ Series
RoHS Agency Approvals AGENCY Parameter Symbol Value Unit Peak Pulse Power Dissipation at T A =25ºC by xμs waveform (Fig.)(Note ), (Note 2) P PPM 5 W Power Dissipation on infinite heat sink at T A =5 O
More information- 1500W > SMCJ5.0A/CA~440A/CA
Transient Voltage Suppressors Diodes Surface Mount - 5W > SMCJ5.A/CA~44A/CA Series The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More informationMicro Commercial Components Marilla Street Chatsworth. Watts
20736 Marilla Street Chatsworth!"# $%!"# SMCJ5.0(C)A THRU SMCJ440(C)A Features Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For surface mount application
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationSMCG5.0A thru SMCG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 1500 W P D 6.5 W I FSM
More informationSMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional
SMCJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSMCJ Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
SMCJ Series RoHS Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationSMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series
SMCG-HR Series RoHS Pb e3 Description The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information1.5SMCJ5.0A-AU~1.5SMCJ70CA-AU
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E2467 FEATURES For surface mounted applications in order to optimize board space.
More informationTransient Voltage Suppressors. SMCJ Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Voltage Suppressors SMCJ Series Features UNI Low profile package Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Typical IR less than 1µA
More informationMicro Commercial Components Marilla Street Chatsworth C/ W C/ W
Features Mechanical Data Terminals: solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end( cathode) except Standard packaging: 16mm tape per ( EIA 481). Weight: 0.007 ounce,
More information1SMA4728A SZ1330A. Features. Mechanical Data. Maximum A =25 C unless otherwise specified 1.0W SURFACE MOUNT ZENER DIODE
W SURFACE MOUNT ZENER DIODE Pb Features Glass Passivated Die Construction W Power Dissipation B V 3V Nominal Zener Voltage % Standard Vz Tolerance D Low Inductance A For Use in Voltage Regulator or Reference
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationSZ1SMC5.0AT3G Series. TVS Diodes. Surface Mount > 1500W > SZ1SMC5.0AT3G Series. Cathode. Anode. Uni-directional. Description
SZ1SMC5.0AT3G Series Pb Description The SZ1SMC5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features Glass passivated junction. 10 W Peak Pulse Power capability on
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIJI MICROLCTRONICS CO., Ltd SMCJ Series 1500W Transient Voltage Suppressor Rev.4 DSCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive
More informationTV15C5V0-G Thru. TV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More informationTransient Suppression Diodes For General Purpose Use
SMAJ SMCJ SMBJ GENERAL DESCRIPTION The SMAJ, SMBJ, and SMCJ Series are a popular format of general purpose transient voltage suppression diodes. They are based on the low leakage, high reliability, but
More informationATV15C5V0-G Thru. ATV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More information5000W Surface Mount Transient Voltage Suppressor
5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent
More informationATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free
TV55V-HF Thru. TV544-HF Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive
More informationSMC5K10A thru SMC5K85A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 11.1 V to 104 V V WM 10 V to 85 V P PPM 5000 W T J max. 150 C Polarity Uni-directional Package TYPICAL APPLICATIONS Use
More informationGreen. Bottom View. Top View. Part Number Qualification Case Packaging SMCJXX(C)AQ-13-F* Automotive SMC 3000/Tape & Reel
Green J14()AQ J36()AQ 1,500W SURFAE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Product Summary (@T A = +25 ) P PK I FSM (A) V RWM (V) PM (AV) 1500W 200 14-36 5W Features and Benefits 1500W Peak Pulse
More informationSMF SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A=25 C unless otherwise specified WTE
WTE POWER SEMICONDUCTORS SMF SERIES 200W SURFACE MOUNT TRANSIENT SUPPRESSOR Pb Features Glass Passivated Die Construction 200W Peak Pulse Power Dissipation A 5.0V 90V Standoff Voltage Uni- and Bi-Directional
More informationSMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors DESIGN SUPPORT TOOLS Models Available SMPCxxA SMPCxxAN esmp Series 2 SMPC (TO-277A) A Anode K Cathode 1 Cathode 1 Cathode 2 Anode 1 Anode 2 click logo
More informationSMCJ5V0(C)A - SMCJ170(C)A 1500 Watt Transient Voltage Suppressors
SMCJ5V0(C)A - SMCJ170(C)A 1500 Watt Transient Suppressors Features Glass-Passivated Junction 1500 W Peak Pulse Power Capability on 10/0 μs Waveform. Excellent Clamping Capability Low-Incremental Surge
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationomponents Marilla Street Chatsworth Watts
omponents 2736 Marilla Street Chatsworth!"# $%!"# 5.SMLJA THRU 5.SMLJ4A Features Halogen free available upon request by adding suffix "-HF" For surface mount application in order to optimize board space
More informationPAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
More information1SMC5.0AT3G Series, SZ1SMC5.0AT3G Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.0AT3G Series, SZ.0AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationSMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.
Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationTRANSIL TM SM15T6V8,A/220,A SM15T6V8C,CA/220C,CA
SM15T6V8,A/220,A SM15T6V8C,CA/220C,CA TRANSIL TM FEATURES PEAK PULSE POWER= 1500 W @ 1ms BREAKDOWN VOLTAGE RANGE : From 6V8 to 220 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
SMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features: Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation 5.0V- 170V Standoff Voltage Uni- and Bi-Directional Versions Available
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationDO-15 China - Germany - Korea - Singapore - United States - smc-diodes.com
P6KE SERIES TRANSIENT VOLTAGE SUPPRESSOR Features: Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 6.8V- 440V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationSymbol Parameter Value Unit. Note 1 : For a surge greater than the maximum values, the diode will fail in short-circuit. Symbol Parameter Value Unit
SM15T6V8A/220A SM15T6V8CA/220CA TRANSIL TM FEATURES PEAK PULSE POWER : 1500 W (10/1000µs) BREAKDOWN VOLTAGE RANGE : From 6.8 V to 220 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More information1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description
1.5SMC6.8AT3G Pb Description The 1.5SMC6.8AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationNew Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationSMCJ5.0CA Thru SMCJ170CA
Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationM C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More information1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSM5S22 TRANSIENT VOLTAGE SUPPRESSOR
SM5S22 TRANSIENT SUPPRESSOR Features: Low leakage current Low forward voltage drop High surge capability This is a Pb Free Device Additional testing can be offered upon request Mechanical Data: Case: DO-218AB
More informationCD214C Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.
More informationGreen. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR 7.5 V to 12 V) 3 W P
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationP6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationGlass Passivated Ultrafast Plastic Rectifier
Glass Passivated Ultrafast Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability condition Cavity-free glass-passivated junction Ideal for printed circuit
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. SMBJ5.(C)A - SMBJ17(C)A 6W SURFACE MOUNT TRANSIENT OLTAGE SUPPRESSOR Features
More informationSMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features SMA Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
Technical Data Features: Glass Passivated Die Construction 5000W Peak Pulse Power Dissipation Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material
More information