Micro Commercial Components Marilla Street Chatsworth. Watts
|
|
- Gwen Melton
- 6 years ago
- Views:
Transcription
1 20736 Marilla Street Chatsworth!"# $%!"# SMCJ5.0(C)A THRU SMCJ440(C)A Features Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For surface mount application in order to optimize board space Built-in strain relief Glass passivated junction Typical I D less than 1uA above 10V High temperature soldering: 260 o C/10 seconds at terminals Plastic package has Underwrites Laboratory Flammability Halogen free available upon request by adding suffix "-HF" UL Recognized File # E Transient Voltage Suppressor 5.0 to 440 Volts 1500 Watt DO-214AB (SMC) (LEAD FRAME) G H Mechanical Data Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 D E A B C Terminals: solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end( cathode) except Bi-directional types. Standard packaging: 16mm tape per ( EIA 481). Weight: ounce, 0.21 gram Maximum 25 o C Unless Otherwise Specified Peak Pulse on 10/0us waveform(note2, Fig4) I PPM See Table 1 Amps Peak Pulse Power Disspation on 10/0us waveform(note2,3,fig1) P PPM Minimum 1500 Watts Operation And Storage Temperature Range T J, T STG -55 o C to +175 o C F DIMENSIONS INCHES MM DIM MIN MAX MIN MAX NOTE A B C D E F G H SUGGESTED SOLDER PAD LAYOUT Notes: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex Non-repetitive current pulse per Fig.3 and derated above TA=25 o C per Fig Mounted on 8.0mm 2 copper pads to each terminal. 4. Unidirectional and bidirectional available,for bidirectional devices add 'C' suffix to the pn#, i.e.smcj5.0ca 1 of 5
2 PPPM, PEAK PULSE POWER, KW MOUNTEDON5.0mm 2 COPPER LAND AREAS NON-REPETITIVE PULSE WAVEFORM SHOWNINFIGURE3 TA = 25C u s 1. 0u s 10u s u s 1. 0ms 10ms td, PULSE WIDTH, SEC PEAK PULSE POWER(pppm) OR CURRENT (Ipp)DERATING IN PERCENTAGE % T A, AMBIENT TEMPERATURE, C Fig. 1-PEAK PULSE POWER RATING CURVE Fig. 2-PULSE DERATING CURVE Ippm, PEAK PULSE CURRENT, % tf = 10usec Peak Value Ippm Half Value-Ipp 2 TA = 25C Pulse Width(td) is Defined as the Point Where the Peak Decays to 50% of lpp 10/0usec Waveform as Defined by R.E.A. e-kt CJ, CAPACITANCE, pf 20,000 10,000 1,000 TJ =25C f=1.0mhz Vsig =50mVp-p MEASURED AT STAND-OFF VOLTAGE(VMW) MEASURED AT ZERO BIAS td t, TIME, ms Fig. 3-PULSE WAVEFORM V(WM), REVERSE STAND-OFF VOLTAGE, VOLTS Fig. 4-TYPICAL JUNCTION CAPACITANCE 2 of 5
3 ELECTRICAL C Part Number Stand -Off Voltage Breakdown Voltage V BR (V) Test Max. Clamping PP Peak Pulse WM Marking Code Uni-Polar Bi-Polar V WM (V) Min Max I T (ma) V C (V) I PP (A) I D (ua) UNI BI SMCJ5.0A SMCJ5.0CA GDE BDE SMCJ6.0A SMCJ6.0CA GDG BDG SMCJ6.5A SMCJ6.5CA GDK BDK SMCJ7.0A SMCJ7.0CA GDM BDM SMCJ7.5A SMCJ7.5CA GDP BDP SMCJ8.0A SMCJ8.0CA GDR BDR SMCJ8.5A SMCJ8.5CA GDT BDT SMCJ9.0A SMCJ9.0CA GDV BDV SMCJ10A SMCJ10CA GDX BDX SMCJ11A SMCJ11CA GDZ BDZ SMCJ12A SMCJ12CA GEE BEE SMCJ13A SMCJ13CA GEG BEG SMCJ14A SMCJ14CA GEK BEK SMCJ15A SMCJ15CA GEM BEM SMCJ16A SMCJ16CA GEP BEP SMCJ17A SMCJ17CA GER BER SMCJ18A SMCJ18CA GET BET SMCJ20A SMCJ20CA GEV BEV SMCJ22A SMCJ22CA GEX BEX SMCJ24A SMCJ24CA GEZ BEZ SMCJ26A SMCJ26CA GFE BFE SMCJ28A SMCJ28CA GFG BFG SMCJ30A SMCJ30CA GFK BFK SMCJ33A SMCJ33CA GFM BFM SMCJ36A SMCJ36CA GFP BFP SMCJ40A SMCJ40CA GFR BFR SMCJ43A SMCJ43CA GFT BFT SMCJ45A SMCJ45CA GFV BFV SMCJ48A SMCJ48CA GFX BFX SMCJ51A SMCJ51CA GFZ BFZ SMCJ54A SMCJ54CA GGE BGE SMCJ58A SMCJ58CA GGG BGG SMCJ60A SMCJ60CA GGK BGK SMCJ64A SMCJ64CA GGM BGM SMCJ70A SMCJ70CA GGP BGP SMCJ75A SMCJ75CA GGR BGR SMCJ78A SMCJ78CA GGT BGT SMCJ85A SMCJ85CA GGV BGV SMCJ90A SMCJ90CA GGX BGX SMCJA SMCJCA GGZ BGZ For bi-directional type having Vrwm of 10volts and less, the IR limit is double. For parts without A, the VBR is 10% 3 of 5
4 ELECTRICAL C Part Number Standard - Off Voltage Breakdown Voltage V BR (V) Test Max. Clamping PP Peak Pulse WM Marking Code Uni-Polar Bi-Polar V WM (V) Min Max I T (ma) V C (V) I PP (A) I D (ua) UNI BI SMCJ110A SMCJ110CA GHE BHE SMCJ120A SMCJ120CA GHG BHG SMCJ130A SMCJ130CA GHK BHK SMCJ150A SMCJ150CA GHM BHM SMCJ160A SMCJ160CA GHP BHP SMCJ170A SMCJ170CA GHR BHR SMCJ180A SMCJ180CA GHT BHT SMCJ200A SMCJ200CA GHV BHV SMCJ220A SMCJ220CA GHX BHX SMCJ250A SMCJ250CA GHZ BHZ SMCJ300A SMCJ300CA GJE BJE SMCJ350A SMCJ350CA GJG BJG SMCJ400A SMCJ400CA GJK BJK SMCJ440A SMCJ440CA GJM BJM For bi-directional type having Vrwm of 10volts and less, the IR limit is double. For parts without A, the VBR is 10% 4 of 5
5 Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Corp. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights,nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Corp. and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** 's products are not authorized for use as critical components in life support devices or systems without the express written approval of Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. () is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. strongly encourages customers to purchase parts either directly from or from Authorized Distributors who are listed by country on our web page cited below. Products customers buy either from directly or from Authorized Distributors are genuine parts, have full traceability, meet 's quality standards for handling and storage. will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. 5 of 5
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationFeatures. Applications. Agency Approval. Mechanical and Physical Data. Maximum Ratings and Thermal Characteristics. Part Number Code SMCJ C A -
Features Plastic package, excellent insulation strength. Glass passivated chip junction in SMC package. Excellent voltage clamping capability. Low Zener impedance. 1500W peak pulse power capability on
More informationSMCJ Series. 1500W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD. Features. Mechanical Characteristics
4 SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD SMCJ Series 1500W Surface Mount Transient Suppressors Features l Peak power dissipation 1500W @10 x 1000 us Pulse l Low profile package. l Excellent clamping
More informationTransient Voltage Suppression Diodes: SMCJ Series SMD Type 1500 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationZetron Research. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. SMCJ Series. SMCJ Series
RoHS Agency Approvals AGENCY Parameter Symbol Value Unit Peak Pulse Power Dissipation at T A =25ºC by xμs waveform (Fig.)(Note ), (Note 2) P PPM 5 W Power Dissipation on infinite heat sink at T A =5 O
More informationMicro Commercial Components Marilla Street Chatsworth C/ W C/ W
Features Mechanical Data Terminals: solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end( cathode) except Standard packaging: 16mm tape per ( EIA 481). Weight: 0.007 ounce,
More information- 1500W > SMCJ5.0A/CA~440A/CA
Transient Voltage Suppressors Diodes Surface Mount - 5W > SMCJ5.A/CA~44A/CA Series The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More informationSMCJ Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
SMCJ Series RoHS Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional
SMCJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationTransient Voltage Suppressors. SMCJ Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Voltage Suppressors SMCJ Series Features UNI Low profile package Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Typical IR less than 1µA
More informationM C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)
More information1.5SMCJ5.0A-AU~1.5SMCJ70CA-AU
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E2467 FEATURES For surface mounted applications in order to optimize board space.
More informationSMCG5.0A thru SMCG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 1500 W P D 6.5 W I FSM
More informationSMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series
SMCG-HR Series RoHS Pb e3 Description The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationomponents Marilla Street Chatsworth Watts
omponents 2736 Marilla Street Chatsworth!"# $%!"# 5.SMLJA THRU 5.SMLJ4A Features Halogen free available upon request by adding suffix "-HF" For surface mount application in order to optimize board space
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationMCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More informationTransient Suppression Diodes For General Purpose Use
SMAJ SMCJ SMBJ GENERAL DESCRIPTION The SMAJ, SMBJ, and SMCJ Series are a popular format of general purpose transient voltage suppression diodes. They are based on the low leakage, high reliability, but
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features Glass passivated junction. 10 W Peak Pulse Power capability on
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIJI MICROLCTRONICS CO., Ltd SMCJ Series 1500W Transient Voltage Suppressor Rev.4 DSCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive
More informationTV15C5V0-G Thru. TV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More information1500W, 5V - 170V Surface Mount Transient Voltage Suppressor
1500W, 5V - 170V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More informationATV15C5V0-G Thru. ATV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free
TV55V-HF Thru. TV544-HF Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive
More informationSMCJ5V0(C)A - SMCJ170(C)A 1500 Watt Transient Voltage Suppressors
SMCJ5V0(C)A - SMCJ170(C)A 1500 Watt Transient Suppressors Features Glass-Passivated Junction 1500 W Peak Pulse Power Capability on 10/0 μs Waveform. Excellent Clamping Capability Low-Incremental Surge
More information1.5SMCJ SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
.SMCJ SERIES W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction W Peak Pulse Power Dissipation B.V 44V Standoff Voltage Uni- and Bi- Versions Available D Excellent
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More information5000W Surface Mount Transient Voltage Suppressor
5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent
More informationM C C SMBJ11AHE3 THRU SMBJ78CAHE3. Features. Transient Voltage Suppressor 11 to 78 Volts 600 Watt
omponents 2736 Marilla Street Chatsworth!"# $%!"# SMBJAHE3 THU SMBJ78CAHE3 Features For surface mount applicationsin order to optimize board space Lead Free Finish/ohs Compliant (Note) ("P"Suffix designates
More informationSZ1SMC5.0AT3G Series. TVS Diodes. Surface Mount > 1500W > SZ1SMC5.0AT3G Series. Cathode. Anode. Uni-directional. Description
SZ1SMC5.0AT3G Series Pb Description The SZ1SMC5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high
More informationMCC. SS220-L THRU. Features. 2 Amp Schottky Rectifier 20 to 200 Volts DO-214AC (SMA) (LEAD FRAME) Maximum Ratings
Features Guard Ring Protection Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Low Forward High Current Capability Halogen free available upon request
More informationSMC5K10A thru SMC5K85A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 11.1 V to 104 V V WM 10 V to 85 V P PPM 5000 W T J max. 150 C Polarity Uni-directional Package TYPICAL APPLICATIONS Use
More informationSMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.
Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent
More informationM C C 3EZ5.1D5 THRU 3EZ75D5. Features. 3 W Glass Passivated Junction Silicon Zener Diode Volts. Mechanical Data DO-15
Features Low Profile Package Glass Passivated Junction Excellent Clamping Capability Lead Free Finish/RoHS Compliant(Note C)("P" Suffix Designates Compliant. See Ordering Information) Halogen free available
More informationGreen. Bottom View. Top View. Part Number Qualification Case Packaging SMCJXX(C)AQ-13-F* Automotive SMC 3000/Tape & Reel
Green J14()AQ J36()AQ 1,500W SURFAE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Product Summary (@T A = +25 ) P PK I FSM (A) V RWM (V) PM (AV) 1500W 200 14-36 5W Features and Benefits 1500W Peak Pulse
More information1SMC5.0AT3G Series, SZ1SMC5.0AT3G Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.0AT3G Series, SZ.0AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationPAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationSMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors DESIGN SUPPORT TOOLS Models Available SMPCxxA SMPCxxAN esmp Series 2 SMPC (TO-277A) A Anode K Cathode 1 Cathode 1 Cathode 2 Anode 1 Anode 2 click logo
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More informationMicro Commercial Components Marilla Street, Chatsworth, CA91311 Tel: Fax: Process Change Notification.
M C C 076 Marilla Street, Chatsworth, CA9 Tel:88-70-49 ax:88-70-499 Process Change Notification Jan- st -0 Subject : MCC Process Change Notification#PCN_00 Title: MCC revise the pn# designation for MMBD50A~MMBD505A
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationMCC. BC846AW/BW BC847AW/BW/CW BC848AW/BW/CW. Features. NPN General Purpose Transistors. Maximum Ratings SOT-323
Features Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Low current (max. 100mA) Low voltage (max. 65V) Epoxy meets UL 94 V-0 flammability rating Moisure
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationMCC. MMDT3904V
Features Halogen free available upon request by adding suffix "-HF" Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Epitaxial Die Construction Ideal for
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More informationSMCJ5.0CA Thru SMCJ170CA
Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL
More informationomponents Marilla Street Chatsworth nadc Vdc ms
Features Symbol ating ating Unit V DS Drain -source Voltage 60 V V GS Gate -source Voltage ±20 V I D Drain Current 115 ma P D Total Power Dissipation 200 mw JA Thermal esistance Junction to Ambient 625
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationMCC BC558A/B/C. Features. PNP Silicon Amplifier Transistor 625mW
omponents 2736 Marilla Street Chatsworth!"# $%!"# BC556A/B/C BC557A/B/C A/B/C Features Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) 15 o C Junction Temperature
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationMCC. 2N5401 )HDWXUHV. PNP Silicon Amplifier Transistor 625mW 0HFKDQLFDO'DWD TO-92
omponents 20736 Marilla Street Chatsworth!"# $%!"# 2N5401 )HDWXUHV Through Hole Package 1 o C Junction Temperature Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information)
More informationM C C. Revision: B 2016/10/10 MCQ4503 SOP-8. Features Halogen free available upon request by adding suffix "-HF"
omponents 736 Marilla Street Chatsworth!"# $%!"# MCQ43 Features Halogen free available upon request by adding suffix "-HF" Lead Free Finish/ohs Compliant ("P"Suffix designates ohs Compliant. See ordering
More informationSymbol Parameter Value Unit. Note 1 : For a surge greater than the maximum values, the diode will fail in short-circuit. Symbol Parameter Value Unit
SM15T6V8A/220A SM15T6V8CA/220CA TRANSIL TM FEATURES PEAK PULSE POWER : 1500 W (10/1000µs) BREAKDOWN VOLTAGE RANGE : From 6.8 V to 220 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More information400W, 10V - 100V Surface Mount Transient Voltage Suppressor
400W, 10V - V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q101 qualified Low profile package Photo Glass passivated junction Excellent clamping capability Moisture sensitivity level: level
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationM C C. Revision: A 2016/02/07 MCMNP517 DFN2020-6U
omponents 2736 Marilla Street Chatsworth!"# $%!"# MCMNP517 Features Halogen free available upon request by adding suffix "-HF" Super High Density Cell Design for Extremely Low DS(ON) Lead Free Finish/ohs
More informationSymbol Description Value Unit Conditions. Minimum 600
600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More information5000W, 16V - 100V Surface Mount Transient Voltage Suppressor
5000W, 16V - 100V Surface Mount Transient Voltage Suppressor FEATURES 5000 watts peak pulse power capability at 10/1000μs waveform Ideal for automated placement Photo glass passivated junction Excellent
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationM C C. MCAC48N10Y. Features. N-Channel Power MOSFET DFN5060. C Unless Otherwise Specified. Micro Commercial Components
omponents 736 Marilla treet Chatsworth!"# $%!"# MCC48NY Features Trench Power MV MOFET technology Very low on-resistance (ON) Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. SMBJ5.(C)A - SMBJ17(C)A 6W SURFACE MOUNT TRANSIENT OLTAGE SUPPRESSOR Features
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationGreen. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
More informationSMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
More information6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More information3000W, 10V - 100V Surface Mount Transient Voltage Suppressor
3000W, 10V - V Surface Mount Transient Voltage Suppressor FEATURES Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps Compliant
More informationGLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationM C C. MCAC80N06Y. Features. N-Channel Power MOSFET DFN5060. Maximum 25 O. C Unless Otherwise Specified
Features omponents 20736 Marilla treet Chatsworth!"# $%!"# Trench Power MV MOFET technology Very low on-resistance (ON) Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94 V-0
More information