Surface Mount Transient Voltage Suppressors (TVS)

Size: px
Start display at page:

Download "Surface Mount Transient Voltage Suppressors (TVS)"

Transcription

1 Description The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability 5000W Peak power capability at 10 0µs waveform Repetition rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical IR less than 5μA above 25V. High Temperature soldering: 260 /40 seconds at terminals Typical maximum temperature coefficient ΔVBR = 0.1% VBR@25 ΔT Plastic package has Underwriters Laboratory Flammability 94V-0 Matte tin lead free Plated Halogen free and RoHS compliant Typical failure mode is short from over-specified voltage or current Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c IEC ESD 15kV(Air), 8kV (Contact) ESD protection of data lines in accordance with IEC (IEC801-2) EFT protection of data lines in accordance with IEC (IEC801-4) Functional Diagram Cathode Applications Uni-direction Anode TVS devices are ideal for the protection of I/O interfaces, C bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Ratings (TA=25 unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation with a 10/0µs waveform (Fig.1)(Note 1), (Note 2) PPPM 5000 W Peak Pulse with a 10/0µs waveform.(note1,fig.3) I PP See Next Table A Power Dissipation on Infinite Heat Sink at TL=75 PM(AV) 6.5 W Peak Forward Surge, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 A Instantaneous Forward at 25A for Unidirectional Only (Note 4) VF 3.5/5.0 V Operating junction and Storage Temperature Range. TJ, TSTG -55 to +150 Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above T A = 25 per Fig Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. V F < 3.5V for V BR < 200V and V F< 6.5V for V BR > 201V. Revision October 12, / 2017

2 Electrical Characteristics (T A=25 unless otherwise noted) Part Number Marking Reverse Stand-Off VRWM (V) Breakdown VBR (V) Uni Bi Uni Bi MIN Test (ma) (V) Peak Pulse IPP (A) Reverse Leakage (μa) 5.0SMDJ8.0CA 5BDP SMDJ11A 5.0SMDJ11CA 5PDX 5BDX SMDJ12A 5.0SMDJ12CA 5PDZ 5BDZ SMDJ13A 5.0SMDJ13CA 5PEE 5BEE SMDJ14A 5.0SMDJ14CA 5PEG 5BEG SMDJ15A 5.0SMDJ15CA 5PEK 5BEK SMDJ16A 5.0SMDJ16CA 5PEM 5BEM SMDJ17A 5.0SMDJ17CA 5PEP 5BEP SMDJ18A 5.0SMDJ18CA 5PER 5BER SMDJ19A 5.0SMDJ19CA 5PET 5BET SMDJ20A 5.0SMDJ20CA 5PEV 5BEV SMDJ22A 5.0SMDJ22CA 5PEX 5BEX SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ SMDJ26A 5.0SMDJ26CA 5PFE 5BFE SMDJ28A 5.0SMDJ28CA 5PFG 5BFG SMDJ30A 5.0SMDJ30CA 5PFK 5BFK SMDJ33A 5.0SMDJ33CA 5PFM 5BFM SMDJ36A 5.0SMDJ36CA 5PFP 5BFP SMDJ40A 5.0SMDJ40CA 5PFR 5BFR SMDJ43A 5.0SMDJ43CA 5PFT 5BFT SMDJ45A 5.0SMDJ45CA 5PFV 5BFV SMDJ48A 5.0SMDJ48CA 5PFX 5BFX SMDJ51A 5.0SMDJ51CA 5PFZ 5BFZ SMDJ54A 5.0SMDJ54CA 5PGE 5BGE SMDJ58A 5.0SMDJ58CA 5PGG 5BGG Revision October 12, / 2017

3 Electrical Characteristics (T A=25 unless otherwise noted) (Continue) Part Number Marking Reverse Stand-Off VRWM (V) Breakdown VBR (V) Uni Bi Uni Bi MIN Test (ma) (V) Peak Pulse IPP (A) Reverse Leakage (μa) 5.0SMDJ60A 5.0SMDJ60CA 5PGK 5BGK SMDJ64A 5.0SMDJ64CA 5PGM 5BGM SMDJ70A 5.0SMDJ70CA 5PGP 5BGP SMDJ75A 5.0SMDJ75CA 5PGR 5BGR SMDJ78A 5.0SMDJ78CA 5PGT 5BGT SMDJ80A 5.0SMDJ80CA 5PGB 5BGB SMDJ85A 5.0SMDJ85CA 5PGV 5BGV SMDJ90A 5.0SMDJ90CA 5PGX 5BGX SMDJA 5.0SMDJCA 5PGZ 5BGZ SMDJ110A 5.0SMDJ110CA 5PHE 5BHE SMDJ120A 5.0SMDJ120CA 5PHG 5BHG SMDJ130A 5.0SMDJ130CA 5PHK 5BHK SMDJ140A 5.0SMDJ140CA 5PHB 5BHB SMDJ150A 5.0SMDJ150CA 5PHM 5BHM SMDJ160A 5.0SMDJ160CA 5PHP 5BHP SMDJ170A 5.0SMDJ170CA 5PHR 5BHR SMDJ180A 5.0SMDJ180CA 5PHT 5BHT SMDJ190A 5.0SMDJ190CA 5PHV 5BHV SMDJ200A 5.0SMDJ200CA 5PHW 5BHW SMDJ220A 5.0SMDJ220CA 5PHX 5BHX SMDJ250A 5.0SMDJ250CA 5PHZ 5BHZ SMDJ300A 5.0SMDJ300CA 5PJE 5BJE SMDJ350A 5.0SMDJ350CA 5PJG 5BJG SMDJ400A 5.0SMDJ400CA 5PJK 5BJK SMDJ440A 5.0SMDJ440CA 5PJM 5BJM Note: 1. Suffix 'A ' denotes 5% tolerance device. 2. Add suffix 'C 'or ' CA ' after part number to specify devices. 3. For Bi-Directional devices having V R of 10 volts and under, the I R limit is double. Revision October 12, / 2017

4 Ratings and Characteristic Curves (TA=25 unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve PPPM - Peak Pulse Power (kw) td - Pulse Width (μs) Peak Pulse Power (PPP) or (IPP) Derating in Percentage % TA-Ambient temperature( ) Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance IPPM - Peak Pulse, % IRSM tc tr=10µsec Peak Value IPPM Half Value I PPM (I PPM/2) TJ=25 Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 10/0µsec. Waveform as defined by R.E.A t - Time (ms) CJ Junction Capacitance (pf) bins bins 10 f=1.0mhz Vsig=50mVp-p V BR-Reverse Breakdown (V) Figure 5 - Steady State Power Derating Curve Figure 6 - Non-Repetitive Surge PM(AV), Steady State Power Dissipation (W) TL - Lead Temperature( ) IFSM-Peak Forward Surge (A) TJ=TJ max. 8.3 ms Single Half Sine-Wave 1 10 Number of Cycles at 60Hz Revision October 12, / 2017

5 I-V Curve Characteristics Uni-directional I I IF IPP VBRVRW R VF V VBRVRW R IR IR VRW VBR R V IPP IPP Physical Specifications Environmental Specifications Weight ounce, 0.21 gram Temperature Cycle JESD22-A104 Case Polarity Terminal JEDEC DO-214AB Molded Plastic over Pressure Cooker JESD22-A102 glass passivated junction Color band denotes cathode except High Temp. Storage JESD22-A103 Bipolar Matte Tin-plated leads, Solderable per HTRB JESD22-A108 JESD22-B102D Thermal Shock JESD22-A106 Soldering Parameters Reflow Condition Lead free assembly -Temperature Min (Ts(min)) 150 Pre Heat -Temperature Max (Ts(max)) 200 T P T L TS(max) Ramp-up Critical Zone TL to TP - Time (min to max) (Ts) Seconds Average ramp up rate ( Liquidus Temp TL) to peak 3 /second max Temperature TS(min) 25 Preheat Time to peak temperature (t 25 to peak) Ramp-down Time TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) /second max - Time (min to max) (TL) Seconds Peak Temperature (TP) /-5 Time within 5 of actual peak Temperature (tp) Seconds Ramp-down Rate Time 25 to peak Temperature (TP) 6 /second max 8 minutes Max Do not exceed 280 Revision October 12, / 2017

6 Dimensions DO-214AB (SMC) Cathode Band Inches Millimeters Dimensions Min Max Min Max A B C D E F G H I J K L Part Numbering Part Marking 5. 0 S M D J C A Socay Logo 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VR VOLTAGE SERIES Cathode Band Marking Code Revision October 12, / 2017

7 Packaging Part Number Component Package Quantity Packaging Option Packaging Specification 5.0SMDJXXXXX DO-214AB 500 Tape & Reel -16mm/7 tape EIA STD RS-481 Tape and Reel Specifications 7.0 (177.8) (4.0) (1.5) Diameter 0.512(13.0) Arbor Hole Diameter (13.3) 0.63 (16.0) (16.4) (8.0) Cover tape Direction of Feed Dimensions are in inches (and millimeters) Revision October 12, / 2017

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional

More information

5000W Surface Mount Transient Voltage Suppressor

5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional

More information

omponents Marilla Street Chatsworth Watts

omponents Marilla Street Chatsworth Watts omponents 2736 Marilla Street Chatsworth!"# $%!"# 5.SMLJA THRU 5.SMLJ4A Features Halogen free available upon request by adding suffix "-HF" For surface mount application in order to optimize board space

More information

P6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional

P6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Features. Applications. Agency Approval. Mechanical and Physical Data. Maximum Ratings and Thermal Characteristics. Part Number Code SMDJ C A -

Features. Applications. Agency Approval. Mechanical and Physical Data. Maximum Ratings and Thermal Characteristics. Part Number Code SMDJ C A - Features Plastic package, excellent insulation strength. Glass passivated chip junction in SMC package. Excellent voltage clamping capability. Low Zener impedance. 3000W peak pulse power capability on

More information

P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional

P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Features. Applications. Agency Approval. Mechanical and Physical Data. Maximum Ratings and Thermal Characteristics. Part Number Code SMCJ C A -

Features. Applications. Agency Approval. Mechanical and Physical Data. Maximum Ratings and Thermal Characteristics. Part Number Code SMCJ C A - Features Plastic package, excellent insulation strength. Glass passivated chip junction in SMC package. Excellent voltage clamping capability. Low Zener impedance. 1500W peak pulse power capability on

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

3000W, 10V - 100V Surface Mount Transient Voltage Suppressor

3000W, 10V - 100V Surface Mount Transient Voltage Suppressor 3000W, 10V - V Surface Mount Transient Voltage Suppressor FEATURES Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps Compliant

More information

Zetron Research. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. SMCJ Series. SMCJ Series

Zetron Research. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. SMCJ Series. SMCJ Series RoHS Agency Approvals AGENCY Parameter Symbol Value Unit Peak Pulse Power Dissipation at T A =25ºC by xμs waveform (Fig.)(Note ), (Note 2) P PPM 5 W Power Dissipation on infinite heat sink at T A =5 O

More information

P4KE Series RoHS Pb e3

P4KE Series RoHS Pb e3 P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

P6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description

P6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

Transient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.

Transient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C. TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Transient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode

Transient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,

More information

Transient Voltage Suppression Diodes Axial Leaded 600W > P6KE series

Transient Voltage Suppression Diodes Axial Leaded 600W > P6KE series Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Transient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W

Transient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR series. Bi-directional. Features V BR 3000 W 6.5 W 300 A 3.5 V.

Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR series. Bi-directional. Features V BR 3000 W 6.5 W 300 A 3.5 V. RoHS Uni-directional Description Bi-directional The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional

5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional 5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W

More information

5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description

5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description 5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional

30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional 3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation

More information

15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional

15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional 5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description

3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description 3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning

More information

TP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series

TP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible

More information

SMDJ-HR Series. Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR Series. Description. Uni-directional

SMDJ-HR Series. Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR Series. Description. Uni-directional SMDJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced

More information

Transient Voltage Suppressors. SMDJ Series. Circuit Protection System

Transient Voltage Suppressors. SMDJ Series. Circuit Protection System Transient Voltage Suppressors SMDJ Series Features UNI Low profile package Matte tin lead free Plated Halogen free and RoHS compliant Low incremental surge resistance Typical IR less than 1µA above 12V

More information

SMCJ Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional

SMCJ Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional SMCJ Series RoHS Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

LCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional

LCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning

More information

5.0SMDJxxS Series, Single Chip Design

5.0SMDJxxS Series, Single Chip Design 5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by

More information

SMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional

SMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

Transient Voltage Suppression Diodes: SMCJ Series SMD Type 1500 W

Transient Voltage Suppression Diodes: SMCJ Series SMD Type 1500 W Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional

More information

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data

More information

SMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional

SMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from

More information

ICTE5.0 THRU ICTE15C SERIES

ICTE5.0 THRU ICTE15C SERIES ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional

More information

SMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional

SMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

SMCJ Series. 1500W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD. Features. Mechanical Characteristics

SMCJ Series. 1500W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD. Features. Mechanical Characteristics 4 SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD SMCJ Series 1500W Surface Mount Transient Suppressors Features l Peak power dissipation 1500W @10 x 1000 us Pulse l Low profile package. l Excellent clamping

More information

5000W, 16V - 100V Surface Mount Transient Voltage Suppressor

5000W, 16V - 100V Surface Mount Transient Voltage Suppressor 5000W, 16V - 100V Surface Mount Transient Voltage Suppressor FEATURES 5000 watts peak pulse power capability at 10/1000μs waveform Ideal for automated placement Photo glass passivated junction Excellent

More information

SMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series

SMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

- 1500W > SMCJ5.0A/CA~440A/CA

- 1500W > SMCJ5.0A/CA~440A/CA Transient Voltage Suppressors Diodes Surface Mount - 5W > SMCJ5.A/CA~44A/CA Series The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by

More information

SLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description

SLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power

More information

Transient Voltage Suppression Diodes Axial Leaded 500W > SA series

Transient Voltage Suppression Diodes Axial Leaded 500W > SA series Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency

More information

SMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series

SMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series SMCG-HR Series RoHS Pb e3 Description The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Micro Commercial Components Marilla Street Chatsworth. Watts

Micro Commercial Components Marilla Street Chatsworth. Watts 20736 Marilla Street Chatsworth!"# $%!"# SMCJ5.0(C)A THRU SMCJ440(C)A Features Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For surface mount application

More information

SMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional

SMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional SMCJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced

More information

TV30C5V0-G Thru. TV30C441-G Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device

TV30C5V0-G Thru. TV30C441-G Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device TV35V-G Thru. TV344-G Working Peak : 5. to 44 Volts Power Dissipation: 3 Watts RoHS Device Features - Glass passivated chip. - 3W peak pulse power capability with a /µs waveform, repetitive rate (duty

More information

TV30C5V0-HF Thru. TV30C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device Halogen Free

TV30C5V0-HF Thru. TV30C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device Halogen Free TV35V-HF Thru. TV344-HF Working Peak : 5. to 44 Volts Power Dissipation: 3 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 3W peak pulse power capability with a /µs waveform, repetitive

More information

SLD8S Series RoHS Pb e3

SLD8S Series RoHS Pb e3 SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load

More information

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment

More information

1KSMB Series. Transient Voltage Suppression Diodes. Surface Mount 1000W > 1KSMB series. Uni-directional. Description

1KSMB Series. Transient Voltage Suppression Diodes. Surface Mount 1000W > 1KSMB series. Uni-directional. Description Surface Mount W > KSMB series KSMB Series RoHS Pb e3 Uni-directional Description Bi-directional The KSMB series is designed specifically to protect sensitive electronic equipment from voltage transients

More information

ATV30C5V0-HF Thru. ATV30C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device Halogen Free

ATV30C5V0-HF Thru. ATV30C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device Halogen Free TV35V-HF Thru. TV344-HF Working Peak Reverse Voltage: 5. to 44 Volts Power Dissipation: 3 Watts RoHS Device Halogen Free Features - Ideally for surface mount applications. - Easy pick and place. - Plastic

More information

Transient Voltage Suppressors. SMCJ Series. Circuit Protection System ELECTRONICS

Transient Voltage Suppressors. SMCJ Series. Circuit Protection System ELECTRONICS ELECTRONICS Transient Voltage Suppressors SMCJ Series Features UNI Low profile package Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Typical IR less than 1µA

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

6600W Transient Voltage Suppressor (TVS)

6600W Transient Voltage Suppressor (TVS) Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4

More information

P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.

P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features. P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent

More information

DEVICES FOR BIPOLAR APPLICATIONS

DEVICES FOR BIPOLAR APPLICATIONS SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass

More information

SMCJ5.0CA Thru SMCJ170CA

SMCJ5.0CA Thru SMCJ170CA Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced

More information

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty

More information

Surface Mount Transient Voltage Suppressors

Surface Mount Transient Voltage Suppressors TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems.

More information

P4KE SERIES Taiwan Semiconductor

P4KE SERIES Taiwan Semiconductor 400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than

More information

Comchip 3KP-G Transient Voltage Suppressor Datasheet

Comchip 3KP-G Transient Voltage Suppressor Datasheet Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.

More information

PAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.

PAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. 15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC

More information

P6KE SERIES Taiwan Semiconductor

P6KE SERIES Taiwan Semiconductor 600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps

More information

TPSMD Series. TVS Diodes Surface Mount 3000W > TPSMD series. Description

TPSMD Series. TVS Diodes Surface Mount 3000W > TPSMD series. Description TPSMD Series RoHS Pb e3 Description Bi-directional The TPSMD series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

SA SERIES Taiwan Semiconductor

SA SERIES Taiwan Semiconductor 500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4

More information

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak

More information

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified 3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage

More information

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of

More information

1.5SMCJ5.0A-AU~1.5SMCJ70CA-AU

1.5SMCJ5.0A-AU~1.5SMCJ70CA-AU SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E2467 FEATURES For surface mounted applications in order to optimize board space.

More information

Transient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series

Transient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series Surface Mount 4W > SMAJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation

More information

JIEJIE MICROELECTRONICS CO., Ltd

JIEJIE MICROELECTRONICS CO., Ltd JIJI MICROLCTRONICS CO., Ltd SMCJ Series 1500W Transient Voltage Suppressor Rev.4 DSCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive

More information

Micro Commercial Components Marilla Street Chatsworth C/ W C/ W

Micro Commercial Components Marilla Street Chatsworth C/ W C/ W Features Mechanical Data Terminals: solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end( cathode) except Standard packaging: 16mm tape per ( EIA 481). Weight: 0.007 ounce,

More information

Sales: Technical: Fax:

Sales: Technical: Fax: DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL

More information

BZW04 SERIES Taiwan Semiconductor

BZW04 SERIES Taiwan Semiconductor W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15

More information

Symbol Description Value Unit Conditions. Minimum 600

Symbol Description Value Unit Conditions. Minimum 600 600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:

More information

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability

More information

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor

5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor 5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced

More information

GPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM

GPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability

More information

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range

More information

SMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional

SMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product) 3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)

More information

20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data

20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent

More information

SMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional

SMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

TPSMC-VR Series. TVS Diodes Surface Mount 1500W > TPSMC-VR series Series. Description. Uni-directional. Bi-directional

TPSMC-VR Series. TVS Diodes Surface Mount 1500W > TPSMC-VR series Series. Description. Uni-directional. Bi-directional TPSMC-VR Series Description RoHS Pb e3 The TPSMC-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Automotive Electrical Overvoltage Transient Suppressors Leaded - > ATH series

Automotive Electrical Overvoltage Transient Suppressors Leaded - > ATH series Automotive Electrical Overvoltage Transient Suppressors Leaded - > ATH series Description Overvoltage transient suppressors are designed for applications requiring a low voltage rectifier with reverse

More information

Transient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W

Transient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional

More information

S M A J x x x C A. Reverse Stand-Off Voltage

S M A J x x x C A. Reverse Stand-Off Voltage Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Fast response time

More information

M C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.

M C C.  SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt. omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)

More information

Transient Voltage Suppressors. SMBJ Series. Circuit Protection System

Transient Voltage Suppressors. SMBJ Series. Circuit Protection System Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated

More information

MCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.

MCC.  P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6. Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs

More information