SMF SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A=25 C unless otherwise specified WTE

Size: px
Start display at page:

Download "SMF SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A=25 C unless otherwise specified WTE"

Transcription

1 WTE POWER SEMICONDUCTORS SMF SERIES 200W SURFACE MOUNT TRANSIENT SUPPRESSOR Pb Features Glass Passivated Die Construction 200W Peak Pulse Power Dissipation A 5.0V 90V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability C Plastic Material UL Recognition Flammability D Classification 94V-O B Mechanical Data Case: SOD-23FL, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Except Bi-Directional Weight: 0.07 grams (approx.) Marking: Device Code H Lead Free: For RoHS / Lead Free Version, Add -LF Suffix to Part Number, See Page 6 E G SOD-23FL Dim Min Max A B C D E G H All Dimensions in mm Maximum Ratings and Electrical A=25 C unless otherwise specified Characteristic Symbol Value Unit Peak Pulse Power Dissipation on /0µS Waveform (Note, 2, 5) Figure 3 PPPM 200 Minimum W Peak Pulse Power Dissipation on 8/20µS Waveform (Note 2) PPPM 0 Minimum W Peak Forward Surge Current (Note 3) IFSM 20 A Peak Pulse Current on /0µS Waveform (Note ) Figure 4 IPPM See Table A Steady State Power Dissipation (Note 2, 4) PM(AV) 0.4 W Operating and Storage Temperature Range Tj, TSTG -55 to + C Note:. Non-repetitive current pulse per Figure 4 and derated above T A = 25 C per Figure. 2. Mounted on PC board with recommended minimum pad size ms single half sine-wave duty cycle = 4 pulses per minutes maximum. 4. Lead temperature at 75 C. 5. Peak pulse power waveform is /0µS. SMF SERIES of Won-Top Electronics

2 00 T j = 25 C PEAK PULSE DERATING IN % OF PEAK POWER OR X 0 Waveform as defined by REA C, JUNCTION CAPACITANCE (pf) J Zero % VRWM 0 T A, AMBIENT TEMPERATURE ( C) Fig. Pulse Derating Curve V WM, STANDOFF (V) Fig. 2 Typical Junction Capacitance P, PEAK PULSE POWER (kw) d.0 T=25C j Non Repetitive Pulse Waveform Shown in Fig tp PULSE WIDTH ( s) Fig. 3 Pulse Rating Curve 0 00 I P, PEAK PULSE (%I pp) 0 t r = µ s t p Peak Value I pp Half Value I /2 pp X 0 Waveform as defined by R.E.A t, TIME (ms) Fig. 4 Pulse Waveform SMF SERIES 2 of Won-Top Electronics

3 SMF SERIES 3 of Won-Top Electronics UNI-DIRECTIONAL 200 WATT SURFACE MOUNT TVS UNI- DIRECTIONAL PART NO. DEVICE MARKING CODE STAND-OFF VRWM (V) VBR (V) VBR (V) TEST IT (ma) MAXIMUM Vc (V) PEAK PULSE Ipp (A) IR (ua) SMF5.0A SMF6.0A SMF6.5A SMF7.0A FE FG FK FM SMF7.5A SMF8.0A SMF8.5A SMF9.0A FP FR FT FV SMFA SMFA SMF2A SMF3A FX FZ HE HG SMF4A SMF5A SMF6A SMF7A HK HM HP HR SMF8A SMF9A SMF20A SMF22A HT HB HV HX SMF24A SMF26A SMF28A SMF30A HZ JE JG JK SMF33A SMF36A SMF40A SMF43A JM JP JR JT SMF45A SMF48A SMF5A SMF54A JV JX JZ XE SMF58A SMF60A SMF64A SMF70A XG XK XM XP SMF75A SMF78A SMF80A SMF85A XR XT XB XV SMF90A SMFA SMFA SMF20A XX XZ TE TG SMF30A SMF40A SMFA SMF60A TK TB TM TP SMF70A SMF80A SMF90A TR TT TV

4 SMF SERIES 4 of Won-Top Electronics BI-DIRECTIONAL 200 WATT SURFACE MOUNT TVS BI- DIRECTIONAL PART NO. DEVICE MARKING CODE STAND-OFF VRWM (V) VBR (V) VBR (V) TEST IT (ma) MAXIMUM Vc (V) PEAK PULSE Ipp (A) IR (ua) SMF5.0CA SMF6.0CA SMF6.5CA SMF7.0CA KE KG KK KM SMF7.5CA SMF8.0CA SMF8.5CA SMF9.0CA KP KR KT KV SMFCA SMFCA SMF2CA SMF3CA KX KZ LE LG SMF4CA SMF5CA SMF6CA SMF7CA LK LM LP LR SMF8CA SMF9CA SMF20CA SMF22CA LT LB LV LX SMF24CA SMF26CA SMF28CA SMF30CA LZ ME MG MK SMF33CA SMF36CA SMF40CA SMF43CA MM MP MR MT SMF45CA SMF48CA SMF5CA SMF54CA MV MX MZ NE SMF58CA SMF60CA SMF64CA SMF70CA NG NK NM NP SMF75CA SMF78CA SMF80CA SMF85CA NR NT NB NV SMF90CA SMFCA SMFCA SMF20CA NX NZ PE PG SMF30CA SMF40CA SMFCA SMF60CA PK PB PM PP SMF70CA SMF80CA SMF90CA PR PT PV

5 MARKING INFORMATION RECOMMENDED FOOTPRINT xx (.20) (.20) Cathode = Polarity Band Except Bi-Directional Types xx = Device Code, See Page 3 & (.85) inches(mm) PACKAGING INFORMATION TAPE & REEL Inspection Hole Direction of Unreeling 78mm 4mm 8mm Product ID Label 8mm 4mm.6mm Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 78 3, x 87 x 65 5, x 240 x 420,000.0 Note:. Anti-static plastic reel, white, water clear or blue color. Inspection hole might be varied in different alignment. 2. Components are packed in accordance with EIA standard 48- and SMF SERIES 5 of Won-Top Electronics

6 ORDERING INFORMATION Product No. Package Type Shipping Quantity SMFxx-T SOD-23FL 3000/Tape & Reel. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. 2. To order RoHS / Lead Free version, add -LF suffix to part number above. For example, SMF5.0A-T-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: or Fax: sales@wontop.com Internet: We power your everyday. SMF SERIES 6 of Won-Top Electronics

200W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR. SMF Series WILLAS ELECTRONIC CORP.

200W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR. SMF Series WILLAS ELECTRONIC CORP. Working : 5.0 to 190 V Peak Pulse Power: 200 W Features Glass passivated chip 200 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional

More information

Transient Voltage Suppression Diodes: SMF Series SMD Type 200 W

Transient Voltage Suppression Diodes: SMF Series SMD Type 200 W Features 1. Low profile and space saving 2. For surface mounted applications 3. RoHS compliant 4. Reliable low cost construction utilizing molded plastic technique 5. Glass passivated chip 6. Both bi-directional

More information

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability

More information

TV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device

TV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive

More information

TV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free

TV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility

More information

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible

More information

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified 3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage

More information

TV06B5V0-HF Thru. TV06B441-HF

TV06B5V0-HF Thru. TV06B441-HF TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

1SMA4728A SZ1330A. Features. Mechanical Data. Maximum A =25 C unless otherwise specified 1.0W SURFACE MOUNT ZENER DIODE

1SMA4728A SZ1330A. Features. Mechanical Data. Maximum A =25 C unless otherwise specified 1.0W SURFACE MOUNT ZENER DIODE W SURFACE MOUNT ZENER DIODE Pb Features Glass Passivated Die Construction W Power Dissipation B V 3V Nominal Zener Voltage % Standard Vz Tolerance D Low Inductance A For Use in Voltage Regulator or Reference

More information

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. SMBJ5.(C)A - SMBJ17(C)A 6W SURFACE MOUNT TRANSIENT OLTAGE SUPPRESSOR Features

More information

SMBJ5.0 THRU SMBJ440CA

SMBJ5.0 THRU SMBJ440CA SMBJ5.0 THRU SMBJ440CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off : 5.0-440 Volts Peak pulse power: 600 Watts 0.087 (2.20) 0.071 (1.80) 0.096(2.44) 0.084(2.13) SMB/DO-214AA 0.180(4.57) 0.160(4.06)

More information

FAIRCHILD TVS Is Now Part of

FAIRCHILD TVS Is Now Part of FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power

More information

SMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD-123 Flat Lead Package

SMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD-123 Flat Lead Package Zener Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,

More information

SMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional

SMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from

More information

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB(DO-214AA) PACKAGE. SMBJ Series WILLAS ELECTRONIC CORP.

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB(DO-214AA) PACKAGE. SMBJ Series WILLAS ELECTRONIC CORP. Working : 5.0 to 440 V Peak Pulae Power: 600 W SMB (DO-214AA) Features Glass passivated chip 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage

More information

SMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

SMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional

More information

SMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD 123 Flat Lead Package

SMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD 123 Flat Lead Package Zener Transient Voltage Suppressor SOD 123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,

More information

Suface Mount Transient Voltage Suppressor

Suface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from

More information

SMBJ Transient Voltage Suppressor Diode Series

SMBJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

SMBJ Transient Voltage Suppressor Diode Series

SMBJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Transient Suppressors Features Glass passivated junction. 600W Peak Pulse

More information

SZ1SMB Series. TVS Diodes. Surface Mount > 600W > SZ1SMB Series. Description

SZ1SMB Series. TVS Diodes. Surface Mount > 600W > SZ1SMB Series. Description SZ1SMB Series Pb Description The SZ1SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,

More information

ICTE5.0 THRU ICTE15C SERIES

ICTE5.0 THRU ICTE15C SERIES ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375

More information

Surface Mount > 200W > SMF5.0AT1G Series. Description. Features

Surface Mount > 200W > SMF5.0AT1G Series. Description. Features SMF.TG Series Pb OBSOLETE/EOL Description DTE June/3/8 PCN/ECN# LFPCN446 REPLCED BY SMF Series The SMF.TG Series is designed to protect voltage sensitive components from high voltage, high energy transients.

More information

CD214B Transient Voltage Suppressor Diode Series

CD214B Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.

More information

SMBJ Transient Voltage Suppressor Diode Series

SMBJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

Peak Pulse Power Dissipation on 10/1000us waveform (Note1,Note2, Fig.1). PPPM Minimum 600 Watts

Peak Pulse Power Dissipation on 10/1000us waveform (Note1,Note2, Fig.1). PPPM Minimum 600 Watts TRANSIENT VOLTAGE SUPPRESSORS TM DESCRIPTION The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

5 to 70 Volt DEVICES FOR BIPOLAR APPLICATIONS

5 to 70 Volt DEVICES FOR BIPOLAR APPLICATIONS SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space AEC-Q101 qualified

More information

Green. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel

Green. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping

More information

SZSMF5.0AT1G Series. TVS Diodes. Surface Mount > 200W > SZSMF5.0AT1G Series. Bi-directional. Cathode. Anode. Uni-directional.

SZSMF5.0AT1G Series. TVS Diodes. Surface Mount > 200W > SZSMF5.0AT1G Series. Bi-directional. Cathode. Anode. Uni-directional. Surface Mount > 2W > SZSMF5.ATG Series SZSMF5.ATG Series Pb Description The SZSMF5.ATG Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping

More information

Transient Voltage Suppressors. SMBJ Series. Circuit Protection System

Transient Voltage Suppressors. SMBJ Series. Circuit Protection System Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated

More information

S M A J x x x C A. Reverse Stand-Off Voltage

S M A J x x x C A. Reverse Stand-Off Voltage Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Fast response time

More information

1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional* 1SMBAT3 Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They

More information

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak

More information

1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional* 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent

More information

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction

More information

Parameter Symbol Value Unit

Parameter Symbol Value Unit *RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage

More information

SMF5.0AT1G Series, SZSMF5.0AT1G Series. 200 W Transient Voltage Suppressor SOD-123 Flat Lead Package

SMF5.0AT1G Series, SZSMF5.0AT1G Series. 200 W Transient Voltage Suppressor SOD-123 Flat Lead Package SMF5.AT1G Series, SZSMF5.AT1G Series 2 W Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.AT1G Series is designed to protect voltage sensitive components from high voltage, high energy transients.

More information

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

SMCJ5.0CA Thru SMCJ170CA

SMCJ5.0CA Thru SMCJ170CA Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced

More information

SMB10J SERIES Taiwan Semiconductor

SMB10J SERIES Taiwan Semiconductor 0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically

More information

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse

More information

China - Germany - Korea - Singapore - United States - smc-diodes.com

China - Germany - Korea - Singapore - United States   - smc-diodes.com TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability

More information

1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional

1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional OBSOLETE/EOL DTE June/3/8 PCN/ECN# LFPCN446 REPLCED BY J Series T3G Series, SZT3G Series 6 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive

More information

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment

More information

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,

More information

DO-15 China - Germany - Korea - Singapore - United States - smc-diodes.com

DO-15 China - Germany - Korea - Singapore - United States  - smc-diodes.com P6KE SERIES TRANSIENT VOLTAGE SUPPRESSOR Features: Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 6.8V- 440V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping

More information

ASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF

ASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF SMJ.0(C)-HF Thru. SMJ440(C)-HF Working Peak :.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free Features - 400W peak pulse power capability with a 0/000µs waveform, repetitive rate (duty

More information

SMAJ Transient Voltage Suppressor Diode Series

SMAJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

SMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional

SMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

SMAJ Transient Voltage Suppressor Diode Series

SMAJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional

5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional 5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty

More information

SMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional

SMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional

30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional 3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4

More information

TV04A5V0-HF Thru. TV04A441-HF

TV04A5V0-HF Thru. TV04A441-HF TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive

More information

Comchip 3KP-G Transient Voltage Suppressor Datasheet

Comchip 3KP-G Transient Voltage Suppressor Datasheet Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.

More information

P4SMAJ SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified

P4SMAJ SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified 4W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 4W Peak Pulse Power Dissipation B 5.V 44V Standoff Voltage Uni- and Bi- Versions Available D Excellent Clamping

More information

Sales: Technical: Fax:

Sales: Technical: Fax: DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL

More information

Transient Voltage Suppressors. SMAJ Series. Circuit Protection System

Transient Voltage Suppressors. SMAJ Series. Circuit Protection System Transient Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA above 10V Compatible

More information

P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.

P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features. P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent

More information

200W, 5V - 100V Surface Mount Transient Voltage Suppressor

200W, 5V - 100V Surface Mount Transient Voltage Suppressor 200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

DEVICES FOR BIPOLAR APPLICATIONS

DEVICES FOR BIPOLAR APPLICATIONS SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional

More information

SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features SMA Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability

More information

China - Germany - Korea - Singapore - United States - smc-diodes.com

China - Germany - Korea - Singapore - United States  - smc-diodes.com SMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features: Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation 5.0V- 170V Standoff Voltage Uni- and Bi-Directional Versions Available

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory

More information

P-600. Mechanical Dimensions:In Inches (mm) China - Germany - Korea - Singapore - United States - smc-diodes.

P-600. Mechanical Dimensions:In Inches (mm) China - Germany - Korea - Singapore - United States   - smc-diodes. Features: Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass Passivated Junction 15000W Peak Pulse Power Capability on 10/1000 μs waveform Voltage-17.0 to 280 Volts Excellent

More information

6600W Transient Voltage Suppressor (TVS)

6600W Transient Voltage Suppressor (TVS) Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability

More information

Transient Voltage Suppressors Diodes

Transient Voltage Suppressors Diodes Transient Voltage Suppressors Diodes Surface Mount - 6W > SMBJ5.~44CA Series The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning

More information

20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data

20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent

More information

TV15C5V0-G Thru. TV15C441-G

TV15C5V0-G Thru. TV15C441-G TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%

More information

5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description

5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description 5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability

More information

Symbol Description Value Unit Conditions. Minimum 600

Symbol Description Value Unit Conditions. Minimum 600 600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:

More information

M C C SMBJ11AHE3 THRU SMBJ78CAHE3. Features. Transient Voltage Suppressor 11 to 78 Volts 600 Watt

M C C SMBJ11AHE3 THRU SMBJ78CAHE3.   Features. Transient Voltage Suppressor 11 to 78 Volts 600 Watt omponents 2736 Marilla Street Chatsworth!"# $%!"# SMBJAHE3 THU SMBJ78CAHE3 Features For surface mount applicationsin order to optimize board space Lead Free Finish/ohs Compliant (Note) ("P"Suffix designates

More information

China - Germany - Korea - Singapore - United States - smc-diodes.com

China - Germany - Korea - Singapore - United States   - smc-diodes.com Technical Data Features: Glass Passivated Die Construction 5000W Peak Pulse Power Dissipation Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material

More information

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of

More information

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range

More information

15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional

15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional 5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

200W, 5V - 100V Surface Mount Transient Voltage Suppressor

200W, 5V - 100V Surface Mount Transient Voltage Suppressor 200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I

More information

P4KE SERIES Taiwan Semiconductor

P4KE SERIES Taiwan Semiconductor 400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than

More information

SMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional

SMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product) 3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)

More information

BZW04 SERIES Taiwan Semiconductor

BZW04 SERIES Taiwan Semiconductor W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical

More information

P6KE SERIES Taiwan Semiconductor

P6KE SERIES Taiwan Semiconductor 600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps

More information

Unidirectional* PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS VOLTS 400 WATTS PEAK POWER

Unidirectional* PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS VOLTS 400 WATTS PEAK POWER Unidirectional* The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance

More information

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

M C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.

M C C.  SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt. omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)

More information

Transient Voltage Suppression Diodes: SMAF Series SMD Low Profile Type 400 W

Transient Voltage Suppression Diodes: SMAF Series SMD Low Profile Type 400 W Features 1. Low profile and space saving 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional

More information

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification

More information