ATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features.
|
|
- Primrose Boyd
- 5 years ago
- Views:
Transcription
1 orking Voltage: 36 Volts Peak Pulse Power: 66 atts RoHS Device eatures -Glass passivated chip. -66 peak pulse power capability with a 1/µs waveform, repetitive rate (duty cycle):.1% -Meets ISO a surge specification. -Low leakage. -Uni-directional polarity. -xcellent clamping capability. -Very fast response time. -RoHS compliant. -omply with -Q11 Mechanical Data -ase: -poxy: UL 94V- rate flame retardant. -Polarity: Heatsink is anode..339(8.6).323(8.2).413(1.5).374(9.5).25(5.2).189(4.8).63(16.).591(15.).539(13.7).524(13.3).46(1.3).382(9.7).28(.7).2(.5).366(9.3).343(8.7) Dimensions in inches and (millimeter).114(2.9).91(2.3).138(3.5).98(2.5).16(2.7).67(1.7) Maximum Ratings and lectrical haracteristics Rating at 25 ambient temperature unless otherwise specified. Single phase, half wave, 6Hz, resistive or inductive load. or capacitive load, derate current by 2%. Parameter Symbol Value Units Peak power dissipation with a 1/μs waveform (Note 1 ) PPP 66 Peak power dissipation with a 1/1, μs waveform PPP 52 Peak pulse current with a 1/μs waveform (Note 1) IPP 114. Power dissipation on infinite heatsink at TL=25 PD 8. Peak forward surge current, 8.3ms single half sine-wave uni-directional only ISM 7 Operation junction temperature range TJ -55 to +175 Storage temperature range TSTG -55 to +175 Note: 1. Non-repetitive current pulse per ig.2 and derated above T=25 per ig.1 Q-TV7 RV: Page 1
2 lectrical haracteristics (at T=25 unless otherwise noted) Parameter onditions Symbol Min Max Unit orking peak reverse voltage VRM - 36 V reakdown voltage IT = 5m VR V Reverse leakage current VRM = 36V, TJ = 25-1 IR VRM = 36V, TJ = μ Reverse Surge current (Note 1) IPP lamping voltage IPP = 114 V V Note: 1) Surge current waveform is defined at 1/uS waveform. Rating and haracteristics urves () ig.1 - Pulse Derating urve ig.2 - Pulse aveform Peak Pulse Derating in Percentage Of Peak Power or urrent, (%) Peak Pulse urrent, (%) 12 5 td Tr=1μs Peak value, IPP Tj = 25 Pulse width (td) is defined as the point where the peak current decays to 5% of Ipp Half value = IPP/2 1/μs waveform mbient Temperature, ( ) Time, (ms) ig.3 - Steady State Power Derating urve ig.4 - Peak Pulse Power Rating urve 8. Steady State Power Dissipation, () Lead Temperature, ( ) Peak Power, () 2 1 Pulse idth, td (ms) Q-TV7 Page 2 RV:
3 Reel Taping Specification P1 d P P 12 o D2 D1 D 1 Trailer Device Leader nd Start 16mm (min) 4mm (min) Direction of eed SYMOL d D D1 D ± ± ± ± (MIN.) 2.2 (MIN.).424 ± ± ± ± (MIN.).795 (MIN.) SYMOL P P P ± ± ±.1 4. ±.1 2. ±.1.69 ± ±.2.63 ± ±.4.79 ± / / (MX.) (MX.) Q-TV7 Page 3 RV:
4 Marking ode Part Number Marking ode SM8Z 36 SM8Z 36 Suggested PD Layout SIZ D D Standard Packaging ase Type RL ( pcs ) RL PK Reel Size 5 13 Q-TV7 Page 4 RV:
5 Mouser lectronics uthorized Distributor lick to View Pricing, Inventory, Delivery & Lifecycle Information: omchip Technology:
TV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationTV04A5V0-HF Thru. TV04A441-HF
TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationATV15C5V0-G Thru. ATV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More informationATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free
TV55V-HF Thru. TV544-HF Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive
More informationP4SMA Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown Voltage: 6.8 to 55 volts n Peak Pulse Power: 4 watts n Typical temperature coefficient: V R =.1 % x V R
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF
SMJ.0(C)-HF Thru. SMJ440(C)-HF Working Peak :.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free Features - 400W peak pulse power capability with a 0/000µs waveform, repetitive rate (duty
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationTV15C5V0-G Thru. TV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationCD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
More informationTV30C5V0-HF Thru. TV30C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device Halogen Free
TV35V-HF Thru. TV344-HF Working Peak : 5. to 44 Volts Power Dissipation: 3 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 3W peak pulse power capability with a /µs waveform, repetitive
More informationSurface Mount > 600W > P6SMB11AT3G Series. Description. Features
P6SMB11AT3G Series Pb OBSOLETE/EOL DATE June/30/2018 PCN/ECN# LFPCN41246 REPLACED BY P6SMB Series Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage,
More informationCD214C Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.
More informationCD214L Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts Model 214L is currently available, although not recommended for new designs. Model
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationTV30C5V0-G Thru. TV30C441-G Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device
TV35V-G Thru. TV344-G Working Peak : 5. to 44 Volts Power Dissipation: 3 Watts RoHS Device Features - Glass passivated chip. - 3W peak pulse power capability with a /µs waveform, repetitive rate (duty
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationACZRA4728-HF Thru. ACZRA4764-HF
CZR4728-HF Thru. CZR4764-HF Voltage: 3.3 to Volts Power:. Watts RoHS Device Halogen Free Features -Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance.
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationCDNBS08-SLVU Low Capacitance TVS Array
*RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationParameter Symbol Value Unit
*RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage
More informationCZRA4728-G Thru CZRA4764-G
CZR4728-G Thru CZR4764-G Voltage: 3.3 to Volts Power:. Watts RoHS Device Features -Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. -Standard
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More information5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 5 to 7 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: V R =. % x VR @ 25
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationCDDFN N - Surface Mount TVS Diode Array
*RoHS OMPLINT eatures n I -- (S) ±3 kv (ir/ontact) I -- (Lightning) (/ μs) n S protection to I -- (Level ) n RoHS compliant* pplications n WN/LN devices n // thernet N-7N - Surface Mount TVS iode rray
More information1.5SMC Transient Voltage Suppressor Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown oltage: 6.8 to 55 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: R =.
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationSurface Mount > 400W > 1SMA5.0AT3G Series. Description. Features
SM5.0T3G Series Pb OBSOLETE/EOL DTE June/30/208 PCN/ECN# LFPCN4246 REPLCED BY SMJ Series Description The SM5.0T3G series is designed to protect voltage sensitive components from high voltage, high energy
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMCJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 2 to 58 volts n Power issipation: 5 watts n RoHS compliant* n -Q compliant** pplications n Protection of power buses n Protection of
More informationSMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
PROTETION PRODUTS Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationSA Series. Working Voltage: 5.0 to 190 V Peak Pulae Power: 500 W 500W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DO-15 PACKAGE
Working : 5.0 to 190 V Peak Pulae Power: 500 W Features Glass passivated chip 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSurface Mount Transient Voltage Suppressors
TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems.
More informationCDSOT23-T24CAN CANbus Protector
*RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMBJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 6 watts n RoHS compliant* n -Q11 compliant** pplications n Protection of power buses n Protection
More informationCD214A-B120 ~ B1100 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-xR Series is the
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
More informationCDSOT23-T24CAN-Q CANbus Protector
*RoHS & OMPLINT eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* n -Q101 compliant**
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationt p = 10 ms T j initial = T amb
TRANSIL FEATURES Peak pulse power: 6 W (1/ µs ) Stand-off voltage range 6.8 to 44V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil diodes
More informationP6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationHigh Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
More informationBZW06. Transil. Description. Features
Transil Datasheet - production data Description Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationSMCJ5.0CA Thru SMCJ170CA
Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationBOURNS CD214A-F150-F1600 Rectifier Datasheet
BOURNS CD214A-F150-F1600 Rectifier Datasheet http://www.manuallib.com/bourns/cd214a-f150-f1600-rectifier-datasheet.html The markets of portable communications, computing and video equipment are challenging
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationCD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationTECHNICAL SPECIFICATIONS OF SILICON RECTIFIER
TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 1. Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO 41 MECHANICAL DATA * Case:
More information