SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
|
|
- Rachel Bryant
- 6 years ago
- Views:
Transcription
1 PROTETION PRODUTS Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for use in applications where board space is at a premium. Each device will protect up to five lines. They are unidirectional devices and may be used on lines where the signal polarities are above ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The SMF series devices may be used to meet the immunity requirements of IE , level 4. The small S70 package makes them ideal for use in portable electronics such as cell phones, PDA s, notebook computers, and digital cameras. SMF05 TVS Diode Array For ESD and Latch-Up Protection Features ESD protection for data lines to IE (ESD) ±15kV (air), ±8kV (contact) IE (EFT) 40A (5/50ns) Small package for use in portable electronics Protects five I/O lines Working voltage: 5V Low leakage current Low operating and clamping voltages Solid-state silicon-avalanche technology Mechanical haracteristics EIAJ S70-6L package Molding compound flammability rating: UL 94V-0 Marking : Marking ode Packaging : Tape and Reel per EIA 481 Applications ellular Handsets and Accessories ordless Phones Personal Digital Assistants (PDA s) Notebooks and Handhelds Portable Instrumentation Digital ameras Peripherals MP3 Players ircuit Diagram Schematic & PIN onfiguration S70-6L (Top View) Revision 08/04/04 1
2 SMF05 PROTETION PRODUTS Absolute Maximum Rating Rating Symbol Value Units P eak Pulse Power (tp = 8/20µ s) P eak Pulse urrent (tp = 8/20µ s) P pk 00 1 Watts I PP 8 A ESD per IE (Air) ESD per IE (ontact) 20 V ESD 15 kv Lead Soldering Temperature T L 260 (10 seconds) o Operating Temperature T J -55 to +125 o Storage Temperature T STG 55 to o Electrical haracteristics SMF05 Parameter Symbol onditions Minimum Typical Maximum Units Reverse Stand-Off Voltage V RWM 5 V Reverse Breakdown Voltage V R B I t = 1mA 6 V Reverse Leakage urrent I R V RWM = 5V, T=25 5 µ A lamping Voltage V I PP = 5A, t = 8/20µ s p 9. 8 V lamping Voltage V I PP = 8A, t = 8/20µ s p V Junction apacitance j V R = 0V, f = 1MHz 130 pf 2004 Semtech orp. 2
3 SMF05 PROTETION PRODUTS Typical haracteristics Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating urve Peak Pulse Power - Ppk (kw) Pulse Duration - t p (µs) % of Rated Power or I PP Ambient Temperature - T A ( o ) Pulse Waveform lamping Voltage vs. Peak Pulse urrent Percent of IPP e -t td = IPP/2 Waveform Parameters: tr = 8µs td = 20µs Time (µs) lamping Voltage - V (V) Waveform Parameters: tr = 8µs td = 20µs Peak Pulse urrent - I PP (A) 140 apacitance vs. Reverse Voltage ESD lamping haracteristics (8kV ontact Discharge per IE ) 120 apacitance - j (pf) f = 1MHz Reverse Voltage - V R (V) 2004 Semtech orp. 3
4 SMF05 PROTETION PRODUTS Applications Information Device onnection for Protection of Five Data Lines The SMF05 is designed to protect up to five unidirectional data lines. The device is connected as follows: SMF05 ircuit Diagram Unidirectional protection of five I/O lines is achieved by connecting pins 1, 3, 4, 5 and 6 to the data lines. Pin 2 is connected to ground. The ground connection should be made directly to the ground plane for best results. The path length is kept as short as possible to reduce the effects of parasitic inductance in the board traces. ircuit Board Layout Recommendations for Suppression of ESD. Good circuit board layout is critical for the suppression of ESD induced transients. The following guidelines are recommended: Place the SMF05 near the input terminals or connectors to restrict transient coupling. Minimize the path length between the SMF05 and the protected line. Minimize all conductive loops including power and ground loops. The ESD transient return path to ground should be kept as short as possible. Never run critical signals near board edges. Use ground planes whenever possible. Protection of Five Unidirectional Lines 2 Matte Tin Lead Finish Matte tin has become the industry standard lead-free replacement for SnPb lead finishes. A matte tin finish is composed of 100% tin solder with large grains. Since the solder volume on the leads is small compared to the solder paste volume that is placed on the land pattern of the PB, the reflow profile will be determined by the requirements of the solder paste. Therefore, these devices are compatible with both lead-free and SnPb assembly techniques. In addition, unlike other lead-free compositions, matte tin does not have any added alloys that can cause degradation of the solder joint Semtech orp. 4
5 SMF05 PROTETION PRODUTS Typical Applications 2004 Semtech orp. 5
6 SMF05 PROTETION PRODUTS Outline Drawing - S70 6L 2X E/2 ccc 2X N/2 TIPS aaa SEATING PLANE A N 1 2 B D e1 D EI E e A2 A A1 bxn bbb A-B D GAGE PLANE 0.15 SIDE VIEW H DETAIL L (L1) A SEE DETAIL A c 01 DIMENSIONS INHES MILLIMETERS DIM MIN NOM MAX MIN NOM MAX A A A b c D E E e.083 BS.026 BS 2.10 BS 0.65 BS e BS L L1 N 01 0 (.017) (0.42) 6-8 aaa bbb ccc NOTES: 1. ONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. DATUMS -A- AND -B- TO BE DETERMINED AT DATUM PLANE -H- 3. DIMENSIONS "E1" AND "D" DO NOT INLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. 4. REFERENE JEDE STD MO-203, VARIATION AB. Land Pattern - S70 6L X Y G Z DIM G P X Y Z DIMENSIONS INHES MILLIMETERS (.073) (1.85) P NOTES: 1. THIS LAND PATTERN IS FOR REFERENE PURPOSES ONLY. ONSULT YOUR MANUFATURING GROUP TO ENSURE YOUR OMPANY'S MANUFATURING GUIDELINES ARE MET Semtech orp. 6
7 SMF05 PROTETION PRODUTS Marking odes Part Number SMF05 Marking ode 5 Note: (1) Pin 1 Identified with a dot Ordering Information Part Number Lead Finish Qty per Reel Reel Size SMF05.T SMF05.TT SnPb 3,000 7 Inch Matte Sn 3,000 7 Inch ontact Information Semtech orporation Protection Products Division 200 Flynn Road, amarillo, A Phone: (805) FAX (805) Semtech orp. 7
8 Mouser Electronics Authorized Distributor lick to View Pricing, Inventory, Delivery & Lifecycle Information: Semtech: SMF05.TT
SMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationSR2.8 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationLC Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LC4-12 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge
More informationSLVU EPD TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationLCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.
Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect
More informationSRDA3.3-4 RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SRDA series has been specifically designed to protect sensitive components which are
More informationRClamp0544M RailClamp ESD Protection for HDMI Interfaces PRELIMINARY Features
- RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which
More informationUESD6V8S2B. Dual Line ESD Protection Diode Array UESD6V8S2B SOT523. General Description. M: Monthly Code UESD6V8S2B SOT523
General Description UESD6V8S2B Dual Line ESD Protection Diode Array UESD6V8S2B SOT523 The UESD6V8S2B of TVS diode array is designed to protect sensitive electronics from damage or latch-up due to ESD.
More informationEClamp2340C. EMI Filter and ESD Protection for Color LCD Interface PRELIMINARY. PROTECTION PRODUCTS - EMIClamp TM Description.
PROTETION PRODUTS - EMIlamp TM Description The Elamp TM 0 is a low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic discharge
More informationSR70 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The has been specifically designed to protect sensitive components which are connected to data and transmission
More informationWE05MF. 2 SOT-553 (Top View) Features IEC COMPATIBILITY (EN ) Tel: Transient Voltage Suppressor SOT-553
Document: W030044, Rev: A Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 30 Watts Peak Pulse Power per Line (t p =8/20μs) Low operating and clamping voltages Up to Four
More informationSLVU EPD TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationuclamp3311p Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics
- MicroClamp TM Description The µclamp TM series of Transient Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications where low operating voltage is vital. They offer
More informationSLVU EPD TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationUESD54B/55B/56B/57B/64B
Quad/Five/Six Line ESD Protection Diode Array UESD54B SC70-5/SC88A/SOT353 UESD55B SC89-6/SOT563/SOT666 UESD56B SC89-6/SOT563/SOT666 UESD57B DFN6.6.6 UESD64B SC89-5/SOT553/SOT665 General Description The
More informationuclamp3306p Low Voltage TVS for ESD Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics Applications 1.
- MicroClamp TM Description The μclamp TM series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each
More informationUESD54B/55B/56B/57B/64B
Quad/Five/Six Line ESD Protection Diode Array UESD54B SC70-5/SC88A/SOT353 UESD55B SC89-6/SOT563/SOT666 UESD56B SC89-6/SOT563/SOT666 UESD57B DFN66-6L UESD64B SC89-5/SOT553/SOT665 General Description The
More informationRClamp3304NA RailClamp 3.3V TVS Arrays
- RailClamp Description RailClamp low capacitance TVS array is designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0504N RailClamp Low Capacitance TVS Diode Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are
More informationuclamp3311pq Low Voltage µclamp for Automotive Applications PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics
- MicroClamp Description The µclamp 33PQ transient voltage suppressor is specifically designed to protect sensitive components which are connected to low-voltage data and transmission lines from overvoltage
More informationRClamp3654P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationLC Low Capacitance 3.3 Volt TVS for High Speed Interfaces. PROTECTION PRODUCTS Description. Features. Applications
Descrition The LC33.3 transient voltage suressor is designed to rotect comonents which are connected to high seed data and telecommunication lines from voltage surges caused by lightning, electrostatic
More informationUMD03B through UMD36B
PRODUCT DESCRIPTION The UMDXXB series are Bi-directional Transient Voltage Suppressor Arrays that designed to protect components which are connected to data and transmission lines against electrostatic
More informationuclamp3301d Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics
- MicroClamp TM Description The µclamp TM series of Transient Suppressors (TS) are designed to replace multilayer varistors (MLs) in portable applications such as cell phones, notebook computers, and PDs.
More informationTClamp0602N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features
ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components
More informationSFC3.3-4 Low Voltage ChipClamp ΤΜ Flip Chip TVS Diode Array
Description The SFC3.3-4 is a quad flip chip TS diode array. They are state-of-the-art devices that utilize solid-state EPD TS technology for superior clamping performance and DC electrical characteristics.
More informationFeatures. Applications
PROTECTIO PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationSRDA3.3-6 and SRDA05-6 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationRailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description 查询 TG 供应商 RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected
More informationRClamp0521P PRELIMINARY. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics (T=25 o C) I t I PP V R.
PROTECTIO PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationTClamp3302N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features
ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components
More informationµclamp0301pq Low Voltage µclamp for ESD and CDE Protection PROTECTION PRODUCTS - µclamp Description Features Mechanical Characteristics
µclamp Description The µclamp TVS diodes are designed for automobile applications and qualifi ed to AECQ1 Grade3. They offer superior electrical characteristics such as lower clamping voltage and no device
More informationSLVDA2.8LC. 600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More informationRClamp1821Z. Ultra Small RailClamp 1-Line ESD protection. PROTECTION PRODUCTS - Z-Pak TM Description. Features. Mechanical Characteristics
PROECION PRODUCS - Z-Pak M Description RailClamp S arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. hey are designed to replace 00 size multilayer
More informationSLVU WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
600 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More informationSMDA03LC - SMDA24LCC 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY PIN CONFIGURATIONS
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The SMDAxxLC and SMDAxxLCC Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The is an ultra low capacitance TVS array designed to potect the gigabit network hundred meters transport port.this series has been
More informationSMDA05 through SMDA24
ROTECTION RODUCTS Descrition The SMDxx series of TS arrays are designed to rovide undirectional rotection for sensitive electronics from damage or latchu due to ESD, lightning, and other voltageinduced
More informationTVS Diode Arrays (SPA Diodes) SP725 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP725 Series. RoHS Pb GREEN.
SP725 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP725 is an array of SR/Diode bipolar structures for ESD and overvoltage protection of sensitive input circuits. The SP725 has 2 protection
More informationThe ESD5451R is available in DFP1006-2L package. Standard products are Pb-free and Halogen-free. Circuit diagram
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive
More informationWS2.8LVU. Features IEC COMPATIBILITY (EN ) Transient Voltage Suppressor. SOT23-3L (Top View) Document: W , Rev: C
Document: W33, Rev: C Transient Voltage Suppressor Features 4 Watts peak pulse power (t p =8/μs) One device protects one unidirectional line Two devices protect two high-speed data line pairs Low capacitance
More informationESD9N12BA ESD9N12BA. Descriptions. Features. Applications. Order information. http//:
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ES9N12BA is a TVS (Transient Voltage Suppressor) designed to protect sensitive electronic components which
More information3 * ESD5302N ESD5302N. Descriptions. Features. Applications. Order information. http//:
2-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More information6V8 * ESDA6V8UD ESDA6V8UD. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More informationSRV05-4-A ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW APAITANE STEERING DIODE/TVS ARRAY DESRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART phones,
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER SDD32A05L01 series
Product specification November 7, 218 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 escription Electrostatic ischarged Protection evices
More information5V 4 * 1 5 ESD5344D ESD5344D. Descriptions. Features. Order information. Applications. http//:www.sh-willsemi.com
ESD5344D 4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ESD5344D is an ultra-low capacitance TVS (Transient Voltage Suppressor)
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER LBD8CXXL01 series
Product specification ecember 18, 18 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic ischarged Protection evices (ES) ata
More informationSMDB712C BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION The offers four individual asymmetrical devices in a SO-8 package. The device can be configured for 2 or 4 datalines depending on power level requirements.
More informationPSMDA05C-4 - PSMDA24C-4
500 WATT MULTI-LINE TVS ARRAY DESCRIPTION The PSMDAxxC-4 Series are monolithic transient voltage suppressor arrays that provide board level protection for standard TTL and MOS bus line applications against
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationu Cellular Handsets & Accessories u Portable Instrumentation u Keypads, Side Keys, LCD Displays u Notebooks & Desktop Computers u MP3 Players
P OTECTION PRODUCTS Ò D! The µclamp series of Transient Voltage Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP A Discrete Unidirectional TVS Diode
SP1212 12A Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SP1212 unidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationTVS Diode Arrays (SPA Diodes) SP725 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP725 Series. RoHS Pb GREEN.
SP725 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP725 is an array of SR/Diode bipolar structures for ESD and overvoltage protection of sensitive input circuits. The SP725 has 2 protection
More informationSLVE2.8 and SLVG2.8. EPD TVS Diodes For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Descrition The SL series of transient voltage suressors are designed to rotect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationPSRDAxx-4A Series 500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The are low capacitance multi-line steering diode/transient voltage suppressor arrays that provides board level protection for standard TTL
More informationTVS Diode Arrays (SPA Diodes) SP723 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP723 Series. RoHS Pb GREEN.
SP723 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP723 is an array of SR/Diode bipolar structures for ESD and over-voltage protection of sensitive input circuits. The SP723 has 2 protection
More informationEAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high
More informationESD5651N ESD5651N. Descriptions. Features. Applications. Order information. Pin1. Pin2. 4.5V, Single Li-ion Battery Port Surge Protector
4.5V, Single Li-ion Battery Port Surge Protector http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive electronic
More informationUS2.8-4LVU. Features IEC COMPATIBILITY (EN ) Schematic & PIN Configuration. Transient Voltage Suppressor SO-8.
Document: W314, Rev: C Transient Voltage Suppressor Features 4 Watts peak pulse power (t p =8/2μs) Protects Two Line Pairs (Four lines) Low capacitance Low leakage current Low operating and clamping voltage
More informationSMDA03LC - SMDA24LCC 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The SMDAxxLC and SMDAxxLCC Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationPESDAWC236T5VU Low Capacitance TVS Array
Low Capacitance TVS Array Description The is low capacitance transient voltage suppressor 6 5 4 array for high speed data interface that designed to protect sensitive electronics from damage or latch-up
More informationESD5311X ESD5311X 1-Line, Bi-directional, Ultra-low Capacitance http//: Transient Voltage Suppressors Descriptions
1-Line, Bi-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) designed to protect high
More informationDSL03-24 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The transient voltage array, steering diode combination device meets
More informationPAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
More informationSP721 Series 3pF 4kV Diode Array
SP7 Series 3pF 4kV Diode Array RoHS Pb GREEN Description Pinout SP7 (PDIP, SOI) TOP VIEW Functional Block Diagram V+ V- 4 8 V- 3 4 3, 5-7 8 7 6 5 V+ The SP7 is an array of SR/Diode bipolar structures for
More informationPAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION The is an asymmetrical line protection transient voltage suppressor array, designed for local interconnect network (LIN) bus protection. This
More informationSMP6LLCxx-2P Series RTCA DO-160G COMPLIANT PRODUCT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-16 PACKAGE APPLICATIONS FEATURES
MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The are high powered multi-line low capacitance transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationTVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationPSR05 STEERING DIODE / TVS ARRAY COMBO APPLICATIONS. Ethernet - 10/100 Base T FireWire Wireless Communications USB Interface
56 Only One Name Means ProTek Tion PSR5 STEERIN DIODE / TVS ARRAY COMBO APPLICATIONS Ethernet - / Base T FireWire Wireless Communications USB Interface IEC COMPATIBILITY (EN6-) 6-- (ESD): Air - 5kV, Contact
More informationSR2.8 - SR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The SR series offers two low voltage (2.8V & 3.3V) and low capacitance steering diode TVS arrays. This series is designed to protect two line
More informationWS2.8-4LVU. Features IEC COMPATIBILITY (EN ) Schematic & PIN Configuration. Transient Voltage Suppressor SO-8.
Document: W3, Rev: D Transient Voltage Suppressor Features Watts peak pulse power (t p =/μs) Protects Two Line Pairs (Four lines) Low capacitance Low leakage current Low operating and clamping voltage
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More informationPAM08SD23xx/C Series HIGH POWERED TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
HIGH POWERED TVS ARRAYS DESCRIPTION The are transient voltage suppressor arrays designed for ESD protection of automotive applications. These silicon based diodes offer superior clamping voltage and performance
More informationUSB USB50824C 500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The USB508xx and USB508xxC Series are multi-line ultra low capacitance transient voltage suppressor arrays that provide board level protection
More informationGBLC03 - GBLC24C. This datasheet has been downloaded from at this page
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationWS2.8-8LVU. Features IEC COMPATIBILITY (EN ) Schematic & PIN Configuration. Transient Voltage Suppressor. SO-8 (Top View)
Document: W315, Rev: C Transient Voltage Suppressor Features 6 Watts peak pulse power (t p =8/2μs) Protects Four Line Pairs (Eight lines) Low capacitance Low leakage current Low operating and clamping
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More informationPESDHC5D7VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationPSD0561 HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION DFN-2 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION The is a transient voltage suppressor array, designed to protect sensitive electronics from damage or latchup due to EOS, lightning, CDE and ESD. This
More information1.5KE SERIES 1500 WATT TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
1500 WATT TVS COMPONENT DESCRIPTION The 1.5KE Series, are discrete 15,00 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
More informationSP6003 Series 7pF EMI Filter Array with ESD Protection
ESD and EMI Filter Devices - 7pF EMI Filter Array with ESD Protection RoHS Pb GREEN Description Littelfuse s integrates 4 and 6 EMI filters (C-R-C) into a small, low-profile µdfn package with each filter
More informationuclamp0571p - uclamp3671p
- MicroClamp Description μclamp TS diodes are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD. They feature large cross-sectional area junctions for
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s UDT23AXXL02 series are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series
More informationAOZ8211 One-line TVS Diode
One-line TVS Diode General Description The OZ8211 is a one-line transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions and SD. This device incorporates
More informationESD5641DXX series. ESD5641DXX series. Descriptions. Features. Applications. Order information. http//:
1-Line, Uni-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a transient voltage suppressor designed to protect power interfaces. It is suitable to replace multiple
More informationPJSD05CW-AU SERIES. Fig.130. Single Line TVS Diode for ESD Protection in Portable Electronics FEATURES MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS
PJSD5W-AU SERIES Single Line TVS Diode for ESD Protection in Portable Electronics VOLTAGE 5 to 36 Volt POWER 35 Watt FEATURES Transient protection for data lines to IE 61-4-2 (ESD) + 15kV (air),+ 8kV (contact).78(1.95).68(1.75)
More informationPAM02SD23xx/C Series ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION The are ultra low capacitance transient voltage suppressor arrays, designed to protect automotive applications. These devices are available in either a unidirectional
More informationGBLC03 - GBLC24C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationPAM37SDxxAL/CAL Series RTCA DO-160G COMPLIANT PRODUCT
400 WATT TVS COMPONENT DESCRIPTION The is a transient voltage suppressor array, designed to protect applications such as consumer electronic products, automotive, telecommunications, aerospace and intelligent
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationSP pF 24kV Bidirectional Discrete TVS
SP1312 11pF 24kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1312 bidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More information