High. FXL1350-XXX-M Power Choke R 0 1 / 9. Page : Applications. material. Powder iron core. Frequency range. up to 5MHz RoHS compliant.
|
|
- Allan Robertson
- 5 years ago
- Views:
Transcription
1 1 / 9 High Current, Power Inductors FXL135-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 13.8x19x 5.mmm maximum surface mount package Powder iron core material Magnetically shielded, low EMI High current carrying capacity, Low core losses Frequency range up to 5MHz RoHS compliant Applications Voltage Regulator R Module (VRM) Multi-phase regulatorss Point-of-load moduless Smart phone POL modules SSD modules Notebookk regulators Battery power systems Graphics cards Data networking and storage systems Environmental Data Storage temperature range: -55 C to +125 C Operating temperaturee range: -55 C to +125 C (ambient plus self-temperature rise) ) Solder reflow temperature: J-STD-2D compliant FXL135-1R5-M Model Description μh Value Global Part Number ±2 % Tolerance F X L R M Product Series Dimensions Valuee Tol.
2 2 / 9 DCC Resistance Heating Rating Current Saturation Current Part No. L (μh) DCR (mω) Idc (A) Isat (A) ±2 %, 1 khz, 1V TYP. MAX. TYP. TYP. FXL135-R22-M FXL135-R36-M FXL133-R5-M FXL135-R68-M FXL135-R82-M FXL135-1R-M FXL135-1R5-M FXL135-2R2-M FXL135-3R3-M FXL135-4R7-M FXL135-6R8-M FXL135-1-M FXL M FXL M FXL M Notes All test data is referenced to 25 C ambient Operating temperature range - 55 C to C 3. Idc(A):DC current (A) that will cause an approximatee T of 4 C(referencee ambient temperaturee is 25 C) 4. Isat(A):DC current (A) that will cause L to dropapproximately3 % 5. The part temperature (ambient + temp rise) r should not exceed 125 C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.
3 3 / 9 Dimensions-mm Dimensions Code B R36/R5/R68 1R/1R5/2R2 3.85±.5 3R3/1 22/33/47 5.±.5 Marking The inductor is marked with a 3-digit code Example - - 1R Note: Using Ink for marking
4 4 / 9 Performance Graphs Test Instrumentss Wayne kerr 326B/G LCR Meter Wayne kerr 3265B Bias Current Source Test Condition Temperature: 266 ± 3 Humidity: < 7% RH Frequency: 1 KHz, V.22 FXL135-R22-M 1.4 FXL135-R36-M DC BIAS(Amps) FXL135-R5-M 1.7 FXL135-R68-M FXL135-R82-M 1 1 FXL135-1R-M TEMP RISE( ) DC BIAS(Amps) DC BIAS( (Amps)
5 5 / 9 5 FXL135-1R5-M 1 5 FXL135-2R2-M FXL135-3R3-M FXL135-4R7-M TEMP RISE( ) FXL135-6R8-M 1 1 FXL135-1-M DC BIAS( (Amps) FXL M 1 35 FXL M INDUCTANCEμH)
6 6 / 9 5 FXL M
7 7 / 9 Mechanical Reliability Item Specification and Requirement The surface of terminal immersed shall Solderability Vibration Shock break Endurance Reliability Item Thermal Shock High Temperature Resistance Humidity Resistance Low Temperature Store High Temperature Store be minimum of 95% covered with a new coating of solder change: Within ±1% Without mechanical damage such as breakk change: Within ± 1% Without mechanical damage such as Specification and Requirement change: Within ± 1% change: Within ± 1% change: Within ± 1% change: Within ± 1% change: Within ± 1% Test Method Solder heat proof: Preheating: 16 ± 1 Retention time: 245 ± 5 for 2 ±.5 seconds Vibration frequency: (1 Hz to 555 Hz to 1Hz) in 6 seconds as a period Vibration time: Period cycled for 2 hours in each off 3 mutual perpendicular directions. Amplitude: 5 mm max. Peak value: 1 G Duration off pulse: 11mss 3 times in each e positivee and negative direction of 3 mutual perpendicular directions Test Method Repeat 1 cycles as follow: (-55 ± 2 ; 3 ± 3 min) ) (Room temp., 5 min) (+125 ± 2, 3 ± 3 min) (Room temp., 5 min) ) Recovery: / - hours of recovery under the standard condition afterr the test. Environment condition: 85 ± 2 Applied Current: Rated current Duration: / - hours Environment condition: 6 ± 2 Humidity: 9 95% 9 Applied Current: Rated current Duration: / - hours Store temperature: -55 ± 2,1 + 4 / - hours Store temperature: +125 ± 2,1 + 4 / - hours
8 8 / 9 Tape Packagingg Dimensions A B K t 13.4 ± ± ±.1.35±.5 Reel Dimensions mm A B 24.5 ±.2 ±.2
9 9 / 9 Peel force of top cover tape The peel speed shall be about 3mm/minute The peel force of top cover tape shall be between.1 to 3 N Numbers of taping 5pieces/reel Label making The following items shall be marked on the productionn and shipping Label on the reell Production Labe Part No Description Quantity Produce No Taping No Shipping Label (1)*Customer'ss name (2)*Customer'ss part No (3)Manufacturer's part No (4)Manufacturer's name (5) Manufacturer's country
Kun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
More informationKun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
More informationHCM1103 High current power inductors
Supersedes June 2012 Applications Product features 11.5 x 10.3 x 3.0 mm maximum surface mount package Iron powder core material Magnetically shielded, low EMI High current carrying capacity, low core losses
More informationHCP0704 High current power inductors
Supersedes February 009 pplications Voltage Regulator Module (VRM) Multi-phase regulators Desktop and servers Base station equipment Notebook and laptop regulators Data networking and storage systems Point-of-load
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationHCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
More informationHCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features
Supersedes June 2014 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment Notebook and laptop regulators Battery
More informationHCM1707. High current power inductors. Technical Data Applications
Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery
More informationPower Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
More informationSunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
More informationDR1050 Shielded power inductors
Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Graphics cards and battery powered systems Point-of-load
More informationDR1040 Shielded power inductors
Shielded power inductors Supersedes March 007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Graphics cards and battery powered
More informationMPI40-V2 High current, low profile, miniature power inductors
Applications Handheld/mobile devices Portable media players Notebook/netbook/laptop regulators Tablets/smartbooks Battery operated devices LED drivers LCD displays Point-of-load (POL) converters Product
More informationFP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
More informationHCM1307 High current power inductors
Applications Multi-phase regulators Voltage Regulator Modules (VRMs) Distributed power systems - converters Desktop and server VRMs and EVRDs Point-of-Load (POL) modules Field Programmable Gate Array (FPGA)
More informationDR1030 Shielded power inductors
Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Notebook and laptop regulators Graphics cards and battery
More informationHCMA0703 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Description Automotive grade 3 qualified High current carrying capacity, low core losses Magnetically shielded, low EMI Frequency range
More informationShielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
More informationFP1005R High frequency, high current power inductors
Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics
More informationFP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
More informationLow Profile High Current Shielded Inductor TL2020SG11 (5.49x5.18x3.0mm)
ow Profile High Current Shielded Inductor TSG (.9x.x3.mm) FEATURES: APPICATIONS: owest height (3.mm) in this package footprint PDA/notebook/desktop/server applications Operating temperature range - C to
More informationSPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 1 PRODUCT DETAIL 2-3 REEL DIMENSIONS 4 REEL PACKAGING QUANTITY 4 RELIABILITY AND TEST CONDITION.. 5 RECOMMENDED
More informationMPI25-V2 High current, low profile, miniature power inductors
Technical Data 649 Effective July 8 MPI-V High current, low profile, miniature power inductors Product features High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded,
More informationHigh Current, High Frequency, Miniature Power Inductors
ECS-MPI4040 High Current, High Frequency, Automotive Applications: Driver assistance Information Entertainment Lighting Product description: AEC-Q200 Qualified, Grade 1 Handles high transient inrush current
More informationHCMA1305 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Product features AEC-Q200 qualified High current carrying capacity Low core losses Magnetically shielded, low EMI Frequency range up
More informationMay Inductors for Power Circuits. Wound Ferrite. VLMseries VLM VLM
May 2013 Inductors for Power Circuits Wound Ferrite VLMseries VLM10555-2 VLM10555-3 (1/12) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationVLF-Mseries. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLF-Mseries VLF252010MT VLF252012MT VLF252015MT VLF302510MT VLF302512MT VLF302515MT VLF403210MT VLF403212MT VLF403215MT VLF504010MT VLF504012MT VLF504015MT
More informationVLS-HBX-1 series. Inductors for Power Circuits. Winding metal magnetic material VLS201610HBX-1 VLS201612HBX-1 VLS252010HBX-1 VLS252012HBX-1
September 2014 Inductors for Power Circuits Winding metal magnetic material VLS-HBX-1 series VLS201610HBX-1 VLS201612HBX-1 VLS252010HBX-1 VLS252012HBX-1 (2/21) REMINDERS FOR USING THESE PRODUCTS Before
More informationMPIA25-V2 Automotive grade High current, low profile, miniature power inductors
Product features AEC-Q qualified High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded, Low EMI Rugged construction Self resonant frequency (SRF) greater than
More informationMarch Inductors for power circuits. Wound ferrite. CLF-NI-D series. CLF12577NI-D type CLF12577NI-D
I N D U C T O R S March 2017 Inductors for power circuits Wound ferrite CLF-NI-D series CLF12577NI-D (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
More informationFebruary Inductors for Power Circuits. Wound Ferrite. VLF-M Series. VLF252015MT Type VLF252015MT
February 2016 Inductors for Power Circuits Wound Ferrite VLF-M Series VLF252015MT (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationFrelTec GmbH. Wire Wound SMD Power Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/20 GmbH www.freltec.com SPECIFICATION Part Number 194 303010 * H * 151 * J * E02 _ Type Size Feature Type Value Toleranc e Packing Optio nal
More informationHCMA1104 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes October 2017 Product features AEC-Q200 qualified High current carrying capacity Magnetically shielded, low EMI Frequency range up to 5 MHz Inductance
More informationSPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
December 2013 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 (3.2x3.0 mm) SPM4012 (4.4x4.1 mm) SPM5012 (5.4x5.1 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) (2/25) REMINDERS
More informationJanuary Inductors for power circuits. Wound metal. SPM-HZ series (for automotive) SPM6530-HZ type SPM6530-HZ
I N D U C T O R S January 2018 Inductors for power circuits Wound metal SPM-HZ series (for automotive) SPM6530-HZ (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationMPIA40-V2 Automotive grade High current, low profile, miniature power inductors
Technical Data 5 Effective April 7 MPIA-V Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, Low EMI Rugged flexible construction Self resonant frequency (SRF)
More informationFP1309B High frequency, high current power inductors
Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)
More informationAugust Inductors for power circuits. Wound ferrite. VLS-CX-1 series. VLS252010CX-1 type VLS252010CX-1
I N D U C T O R S August 2017 Inductors for power circuits Wound ferrite VLS-CX-1 series VLS252010CX-1 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
More informationMarch Inductors for Power Circuits. Wound Metallic Magnetic Material. SPM Series. SPM3012 Type SPM3012
March 2015 Inductors for Power Circuits Wound Metallic Magnetic Material SPM Series SPM3012 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationJune Inductors for Power Circuits. Wound Ferrite. VLF-M Series. VLF302512MT Type VLF302512MT. Caution. May 18, Mar.
I N D U C T O R S June 2017 Inductors for Power Circuits Wound Ferrite VLF-M Series VLF302512MT Caution May 18, 2017 Mar. 29, 2019 Sep. 30, 2019 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationJune Inductors for power circuits. Wound ferrite. VLS-E series. VLS4012E type VLS4012E. Caution
I N D U C T O R S June 2017 Inductors for power circuits Wound ferrite VLS-E series VLS4012E Caution (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
More informationFebruary Inductors for Power Circuits. Winding metal magnetic material. VLS-HBX series VLS201610HBX VLS252010HBX
February 2014 Inductors for Power Circuits Winding metal magnetic material VLS-HBX series VLS201610HBX VLS252010HBX (2/13) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationJanuary Inductors for power circuits. Wound ferrite. CLF-NI-D series (for automotive) CLF7045NI-D type CLF7045NI-D
I N D U C T O R S January 2018 Inductors for power circuits Wound ferrite CLF-NI-D series (for automotive) CLF7045NI-D (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationJanuary Inductors for power circuits. Wound ferrite. CLF-NI-D series (for automotive) CLF5030NI-D type CLF5030NI-D
I N D U C T O R S January 2018 Inductors for power circuits Wound ferrite CLF-NI-D series (for automotive) CLF5030NI-D (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to
More informationApril Inductors for Decoupling Circuits. Wound Ferrite. NLFV-EF Series. NLFV32-EF Type. * Dimensions Code JIS[EIA]
I N D U C T O R S April 2017 Inductors for Decoupling Circuits Wound Ferrite NLFV-EF Series NLFV32-EF 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using
More informationApril Inductors for Power Circuits. Wound Ferrite. VLS-CX Series. VLS201610CX Type VLS201610CX
April 2016 Inductors for Power Circuits Wound Ferrite VLS-CX Series VLS201610CX (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationApril Inductors for Power Circuits. Wound Ferrite. VLS-E Series. VLS252008E Type VLS252008E
April 2016 Inductors for Power Circuits Wound Ferrite VLS-E Series VLS252008E (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationLow Profile High Current Shielded Inductor TL2525SG01 (6.86x6.47x3mm)
ow Profile High Current Shielded Inductor TSG (6.86x6.7xmm) FEATURES: APPICATIONS: ow profile, height only (. mm) PDA/notebook/desktop/server applications Operating temperature range - C to + C High current
More informationLow Profile High Current Shielded Inductors
ow Profile High Current Shielded Inductors TSG51 FEATURES: APPICATIONS: ow height (. mm) PDA/notebook/desktop/server applications Operating temperature range - 55 C to + C High current PO converters Frequency
More informationVLCFseries. Inductors for Power Circuits. Wound Ferrite VLCF VLCF4020 VLCF VLCF VLCF5020 VLCF VLCF VLCF VLCF5028-2
May 2013 Inductors for Power Circuits Wound Ferrite VLCFseries VLCF4018-2 VLCF4020 VLCF4024-2 VLCF4028-2 VLCF5020 VLCF5020-1 VLCF5020-3 VLCF5024-2 VLCF5028-2 (1/40) REMINDERS FOR USING THESE PRODUCTS Before
More informationNovember Inductors for power circuits. Wound metal. SPM series. SPM10040 type SPM10040
I N D U C T O R S November 2017 Inductors for power circuits Wound metal SPM series SPM10040 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationJune Inductors for Power Circuits. Wound Ferrite. CLFseries CLF7045 CLF10040
June 2013 Inductors for Power Circuits Wound Ferrite CLFseries CLF7045 CLF10040 (1/12) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationMarch Inductors for Power Circuits. Wound Metallic Magnetic Material. SPM Series. SPM4015 Type SPM4015
March 2015 Inductors for Power Circuits Wound Metallic Magnetic Material SPM Series SPM4015 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationSPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
September 2014 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 SPM3015 SPM3020 SPM4012 SPM4015 SPM4020 SPM5012 SPM5015 SPM5020 SPM5030 SPM6530 (2/49) REMINDERS FOR USING
More informationJuly Inductors for Decoupling Circuits. Wound Ferrite. NLC series. * Dimensions Code JIS[EIA]
July 2013 Inductors for Decoupling Circuits Wound Ferrite NLC series NLC453232 NLC565050 4532 [1812 inch]* 5650 [2220 inch] * Dimensions Code JIS[EIA] (2/15) REMINDERS FOR USING THESE PRODUCTS Before using
More informationJanuary Inductors for Power Circuits. Multilayer Ferrite. MLP Series. MLP1005 Type [0402 inch]* * Dimensions Code JIS[EIA]
January 2015 Inductors for Power Circuits Multilayer Ferrite MLP Series MLP1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure
More informationMay Inductors for Decoupling Circuits. Multilayer Ferrite. MLZ Series. MLZ1005 Type [0402 inch]* * Dimensions Code JIS[EIA]
I N D U C T O R S May 2017 Inductors for Decoupling Circuits Multilayer Ferrite MLZ Series MLZ1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationSMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
More informationFebruary Inductors for power circuits. Wound metal. SPM series. SPM5030 type SPM5030
I N D U C T O R S February 2018 Inductors for power circuits Wound metal SPM series SPM5030 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationMay Inductors for Power Circuits. Wound Metal. SPM Series. SPM6530 Type SPM6530
I N D U C T O R S May 2017 Inductors for Power Circuits Wound Metal SPM Series SPM6530 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationMay Inductors for Power Circuits. Wound Metal. SPM Series. SPM12565XTType SPM12565XT
May 2016 Inductors for Power Circuits Wound Metal SPM Series SPM12565XTType SPM12565XT (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationApril Inductors for Power Circuits. Wound Ferrite. VLCF Series. VLCF Type VLCF5024-2
April 2016 Inductors for Power Circuits Wound Ferrite VLCF Series VLCF5024-2 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationDRA. Automotive grade High power density, high efficiency, shielded drum core power inductors. Technical Data Applications.
Supersedes September 2017 High power density, high efficiency, shielded drum core power inductors Applications Body electronics o Headlamps, tail lamps and interior lighting o Heating Ventilation and Air
More informationAugust Inductors for power circuits. Wound metal. SPM-LR series. SPM5015-LR type SPM5015-LR
I N D U C T O R S August 2017 Inductors for power circuits Wound metal SPM-LR series SPM5015-LR (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationSMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
More informationShielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
More informationApril Inductors for Standard Circuits. Wound Ferrite. NLV-EF Series. NLV25-EF Type. * Dimensions Code JIS[EIA]
I N D U C T O R S April 2017 Inductors for Standard Circuits Wound Ferrite NLV-EF Series NLV25-EF 2520 [1008 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationDecember Inductors for decoupling circuits. Soft termination. KLZ-HR series (for automotive) KLZ2012-HR type. * Dimensions code JIS[EIA]
I N D U C T O R S December 207 Inductors for decoupling circuits Soft termination KLZ-HR series (for automotive) KLZ202-HR 202 [0805 inch]* * Dimensions code JIS[EIA] (2/3) REMINDERS FOR USING THESE PRODUCTS
More informationAutomotive grade Dual winding, high power density shielded drum core power inductors
Supersedes September 07 Dual winding, high power density shielded drum core power inductors Product features AEC-Q00 qualified Dual winding inductors that can be used as a single inductor, SEPIC, Flyback,
More informationJuly Inductors for power circuits. Wound metal. SPM series. SPM10040XTType SPM10040XT
I N D U C T O R S July 2017 Inductors for power circuits Wound metal SPM series SPM10040XTType SPM10040XT (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
More informationSPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000
Sunlord Specifications for Wire Wound SMD Power Inductor Page 1 of 11 SPECIFICATIONS Customer Product Name Sunlord Part Number Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number [ New
More informationApril Inductors for power circuits. Wound ferrite. VLCF series. VLCF type VLCF4018-2
I N D U C T O R S April 2018 Inductors for power circuits Wound ferrite VLCF series VLCF4018-2 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationApril Inductors for Standard Circuits. Wound Ferrite. NLV-EF Series. NLV32-EF Type. * Dimensions Code JIS[EIA]
I N D U C T O R S April 2017 Inductors for Standard Circuits Wound Ferrite NLV-EF Series NLV32-EF 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationApril Inductors for power circuits. Multilayer ferrite. MLP series. MLP2520 type [1008 inch]* * Dimensions Code JIS[EIA] Caution
I N D U C T O R S April 2018 Inductors for power circuits Multilayer ferrite MLP series MLP2520 type MLP2520 2520 [1008 inch]* * Dimensions Code JIS[EIA] Caution (2/20) Products in this catalog are in
More informationJuly Inductors for power circuits. Wound ferrite. RLF series. RLF7030 type RLF7030
I N D U C T O R S July 2017 Inductors for power circuits Wound ferrite RLF series RLF7030 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationJuly Inductors for Power Circuits. Multilayer Ferrite. MLP Series. MLP1608 Type [0603 inch]* * Dimensions Code JIS[EIA]
July 2016 Inductors for Power Circuits Multilayer Ferrite MLP Series MLP1608 Type MLP1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] (2/13) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationCal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
More informationHCM1A1305 Automotive grade High current power inductors
Technical Data Effective September HCMA Automotive grade High current power inductors Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, low EMI Frequency range
More informationMay Inductors for Power Circuits. Wound Ferrite. VLPseries VLP6045L VLP8040
May 2013 Inductors for Power Circuits Wound Ferrite VLPseries VLP6045L VLP8040 (1/12) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationOctober Inductors for power circuits. Wound ferrite. VLS-E-CA series. VLS252010E-CA type VLS252010E-CA. Caution
I N D U C T O R S October 2017 Inductors for power circuits Wound ferrite VLS-E-CA series VLS252010E-CA Caution (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationHCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
More informationVLF403212MT-CA Type. Inductors for Power Circuits. Caution. VLF-M-CA Series (For automobiles) Wound Ferrite VLF403212MT-CA. June 2017.
I N D U C T O R S June 2017 Inductors for Power Circuits Wound Ferrite VLF-M-CA Series (For automobiles) VLF403212MT-CA Caution May 18, 2017 Mar. 29, 2019 Sep. 30, 2019 (2/9) REMINDERS FOR USING THESE
More informationDRA Series High Power Density, High Efficiency, Shielded Inductors. Magnetics Solutions For Automotive Applications
For utomotive pplications Description 65 C maximum total temperature operation Five sizes of utomotive grade shielded drum core inductors Inductance range from.8uh to uh Current range up to 56 mps Mechanical
More informationOctober Inductors for power circuits. Wound ferrite. VLS-E-CA series (For automobiles) VLS3012E-CA type VLS3012E-CA. Caution
I N D U C T O R S October 2017 Inductors for power circuits Wound ferrite VLS-E-CA series (For automobiles) VLS3012E-CA Caution (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be
More informationJune Inductors for Power Circuits. Wound Ferrite. CLF-D Series (For automobiles) CLF7045-D Type CLF7045-D
June 2018 Inductors for Power Circuits Wound Ferrite CLF-D Series (For automobiles) CLF7045-D (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
More informationMLZ1608 type. Inductors for decoupling circuits. MLZ series (for automotive) Multilayer ferrite [0603 inch]* December 2017
I N D U C T O R S December 2017 Inductors for decoupling circuits Multilayer ferrite MLZ series (for automotive) MLZ1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS
More informationSeptember Inductors for Decoupling Circuits. Wound Ferrite. NLCV-EF Series. NLCV32-EF Type. * Dimensions Code JIS[EIA]
September 2016 Inductors for Decoupling Circuits Wound Ferrite NLCV-EF Series NLCV32-EF 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationJanuary Inductors for Power Circuits. Wound Ferrite. CLF Series. CLF12555 Type CLF12555
January 2016 Inductors for Power Circuits Wound Ferrite CLF Series CLF12555 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationSD3118 Low profile power inductors
SD38 Low profile power inductors Supersedes November 009 pplications Mobile/smart phones Tablets/e-readers Media players Digital cameras Small LED driver and LCD displays Handheld/mobile equipment Description
More informationDecember Inductors for power circuits. Wound ferrite. VLS-EX-CA series (for automotive) VLS6045EX type VLS6045EX
I N D U C T O R S December 2017 Inductors for power circuits Wound ferrite VLS-EX-CA series (for automotive) VLS6045EX (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationFP2 Low profile, high current power inductors
Supersedes July 014 FP Low profile, high current power inductors Product description High current carrying capacity Dual conductors allow for low inductance and high current or high inductance and lower
More informationHigh power density, high efficiency, low profile shielded drum core power inductors
Supersedes pril 2014 High power density, high efficiency, low profile shielded drum pplications Notebook power LCD panels Desktop and servers DVD players and portable power devices DC-DC Converters Buck,
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationdiscontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
More informationJanuary Inductors for Power Circuits. Wound Ferrite. SLF Series. SLF7045 Type SLF7045
January 2015 Inductors for Power Circuits Wound Ferrite SLF Series SLF7045 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS
More informationJune Inductors for Power Circuits. Wound Ferrite. CLF Series. CLF6045 Type CLF6045. Caution. May 18, Mar. 29, 2019
I N D U C T O R S June 2017 Inductors for Power Circuits Wound Ferrite CLF Series CLF6045 Caution May 18, 2017 Mar. 29, 2019 Sep. 30, 2019 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationApril Inductors for power circuits. Wound ferrite. SLF series. SLF7032 type SLF7032
I N D U C T O R S April 2018 Inductors for power circuits Wound ferrite SLF series SLF7032 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationApril Inductors for power circuits. Wound ferrite. SLF series. SLF12575 type SLF12575
I N D U C T O R S April 2018 Inductors for power circuits Wound ferrite SLF series SLF12575 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More information