Noise fi lter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC

Transcription

1 Power Choke Coil for Automotive application Series: PCC-MM-LP(MC) PCC-MM-LP(MC) PCC-MM-LP(MC) PCC-MM-LP(MC) High heat resistance and high reliability Using metal composite core (MC) Industrial Property : patents (Registered /Pending ) Features High heat resistance Low profile SMD type High-reliability High bias current : Operation up to C including self-heating : mm max. height (PCC-MM-LP, PCC-MM-LP) mm max. height (PCC-MM-LP, PCC-MM-LP) : High vibration resistance as result of newly developed integral construction; under severe reliability conditions of automotive and other strenuous applications : Excellent inductance stability using ferrous alloy magnetic material (Fig.) : Excellent inductance stability over broad temp. range Temp. stability Low audible (buzz) noise : New metal composite core technology High efficiency : Low RDC of winding and low eddy-current loss of the core Shielded construction AEC-Q Automotive qualified RoHS compliant Fig. Inductance v.s. DC current ETQPMR7KVC(reference) Recommended Applications Noise fi lter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC Standard Packing Quantity (Minimum Quantity/Packing Unit), pcs./box ( reel) : PCC-MM-LP, PCC-MM-LP, pcs./box ( reel) : PCC-MM-LP, PCC-MM-LP Explanation of Part Numbers E T Q 7 9 P M K V Product Code Classification Height Winding Inductance Core Suffix Size R7.7 µh µh R. µh P N K C mm size mm size mm size mm size Temperature rating Operating temperature range After PWB mounting Storage condition Before PWB mounting Tc : C to + C(Including self-temperature rise) Ta : C to + C %RH max. Oct. 7

2 . Series PCC-MM-LP (ETQPM KVP) Standard Parts Series PCC-MM-LP [...(mm)] Inductance DCR (at C) (mω) Rated Current (Typ. : A) Part No. L Tolerance Typ. Tolerance T=K L= % (µh) (%) (max.) (%) ( ) ( ) ( ) ETQPMKVP. 9 (.)..9. ETQPMRKVP..7 (7.7).9.. ETQPMR7KVP.7. (.)...7 ETQPMRKVP. 7. (.)... ± ± ETQPMRKVP. ()... ETQPMRKVP. (.).7.. ETQPMRKVP. 9. (.) ETQPMRKVP. 7. (.)...9 ( ) Measured at k Hz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (. mm FR) and measured at room temperature. See also ( ) ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. K/W measured on... mm case size. See also ( ) ( ) Saturation rated current : DC current which causes L() drop %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of + C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Inductance vs DC Current ETQPMKVP 7 7 ETQPMRKVP 7 9 ETQPMR7KVP 7 9 ETQPMRKVP ETQPMRKVP ETQPMRKVP ETQPMRKVP ETQPMRKVP Oct. 7

3 Case Temperature vs DC Current : Four-layer PWB (. mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( ) ETQPMKVP 7 7 ETQPMRKVP 7 ETQPMR7KVP 7 ETQPMRKVP 7 7 ETQPMRKVP ETQPMRKVP ETQPMRKVP ETQPMRKVP 7 7 Oct. 7

4 . Series PCC-MM-LP (ETQPM KVN) Standard Parts Inductance DCR (at C) (mω) Rated Current (Typ. : A) Series Part No. L Tolerance Typ. Tolerance T=K L= % (µh) (%) (max.) (%) ( ) ( ) ( ) ETQPMKVN. (.).7.. ETQPMKVN. (.)..7. ETQPMKVN. 99. (9.)... ETQPMKVN. 7 (7.).9.. ETQPMRKVN.. (.)... PCC-MM-LP ETQPMR7KVN.7 ± 9 (.9) ±.. 9. [...(mm)] ETQPMRKVN.. (.)... ETQPMRKVN.. (.9) ETQPMRKVN. (.) ETQPMRKVN.. (.) ETQPMRKVN.. (.7)... ( ) Measured at k Hz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (. mm FR) and measured at room temperature. See also ( ) ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. K/W measured on... mm case size. See also ( ) ( ) Saturation rated current : DC current which causes L() drop %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of + C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Inductance vs DC Current ETQPMKVN ETQPMKVN 7 ETQPMKVN 7 9 ETQPMKVN 7 ETQPMRKVN ETQPMR7KVN ETQPMRKVN ETQPMRKVN..... ETQPMRKVN.... ETQPMRKVN ETQPMRKVN.... Oct. 7

5 Case Temperature vs DC Current : Four-layer PWB (. mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( ) ETQPMKVN 7 7 ETQPMKVN 7 ETQPMKVN 7 ETQPMKVN 7 ETQPMRKVN 7 7 ETQPMR7KVN 7 7 ETQPMRKVN ETQPMRKVN 7 ETQPMRKVN 7 ETQPMRKVN 7 ETQPMRKVN Oct. 7

6 . Series PCC-MM-LP (ETQPM KVK) Standard Parts Inductance DCR (at C) (mω) Rated Current (Typ. : A) Series Part No. L Tolerance Typ. Tolerance T=K L= % (µh) (%) (max.) (%) ( ) ( ) ( ) ETQPMKVK. (9.)... ETQPMKVK. 7. (.9)...7 ETQPMKVK. (.) ETQPMKVK.. (.7).. 9. ETQPMRKVK.. (.).9.9. PCC-MM-LP ETQPMR7KVK.7 ±. (7.7) ± 7... [...(mm)] ETQPMRKVK. (.) ETQPMRKVK.. (9.) 9... ETQPMRKVK..9 (.9)... ETQPMRKVK..7 (.7). 7.. ETQPMRKVK..9 (.9) ( ) Measured at k Hz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (. mm FR) and measured at room temperature. See also ( ) ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. K/W measured on... mm case size. See also ( ) ( ) Saturation rated current : DC current which causes L() drop %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of + C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Under development (Start of mass production: the nd half of 7) Please contact us for customized part no. Inductance vs DC Current ETQPMKVK 7 9 ETQPMKVK ETQPMKVK ETQPMKVK ETQPMRKVK 7 ETQPMR7KVK ETQPMRKVK ETQPMRKVK ETQPMRKVK. ETQPMRKVK. ETQPMRKVK Under development Oct. 7

7 Case Temperature vs DC Current : Four-layer PWB (. mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( ) ETQPMKVK 7 7 ETQPMKVK 7 ETQPMKVK 7 7 ETQPMKVK 7 7 ETQPMRKVK ETQPMR7KVK 7 ETQPMRKVK 7 ETQPMRKVK 7 ETQPMRKVK 7 ETQPMRKVK 7 ETQPMRKVK Under development Oct. 7

8 . Series PCC-MM-LP (ETQPM KVC) Standard Parts Series PCC-MM-LP [.7..(mm)] Inductance DCR (at C) (mω) Rated Current (Typ. : A) Part No. L Tolerance Typ. Tolerance T=K L= % (µh) (%) (max.) (%) ( ) ( ) ( ) ETQPM7KVC 7. (.)...7 ETQPMKVC.. (9.)... ETQPMKVC. ().. 7. ETQPMKVC. 7 (.7).. 9. ETQPMKVC.. (7.9). 7.. ETQPMRKVC. ±. (.) ± ETQPMR7KVC.7. (.9) ETQPMRKVC. 9. (.).. 7. ETQPMRKVC.. (7.)... ETQPMRKVC..9 (.9). 7.. ETQPMRKVC.. (.) ( ) Measured at k Hz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (. mm FR) and measured at room temperature. See also ( ) ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 7 K/W measured on.7.. mm case size. See also ( ) ( ) Saturation rated current : DC current which causes L() drop %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of + C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Under development (Start of mass production: the nd half of 7) Please contact us for customized part no. Inductance vs DC Current ETQPM7KVC ETQPMKVC ETQPMKVC ETQPMKVC ETQPMKVC ETQPMRKVC 7 ETQPMR7KVC ETQPMRKVC ETQPMRKVC. ETQPMRKVC ETQPMRKVC Under development Oct. 7

9 Case Temperature vs DC Current : Four-layer PWB (. mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( ) 7 ETQPM7KVC 7 ETQPMKVC 7 ETQPMKVC 7 7 ETQPMKVC ETQPMKVC 7 ETQPMRKVC 7 ETQPMR7KVC 7 ETQPMRKVC 7 ETQPMRKVC 7 ETQPMRKVC 7 ETQPMRKVC Under development Oct. 7

10 Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±. Series PCC-MM-LP (ETQPM KVP) Series PCC-MM-LP (ETQPM KVN) Inductance Suffix.±. Inductance Suffix.±. Date Code Polarity Inductance Suffix.±. Inductance Suffix.7±. Date Code Polarity.±..±.. min.. max..±..±..±..±. Date Code Polarity.±..±..7±.. min.. max. Inductance Suffix.7±..±. Date Code Polarity.±..±.. min.. max.. min.. max..±..±..±..±..±. Date Code Polarity.±..±.. min.. max..±. Series PCC-MM-LP (ETQPM KVK) Series PCC-MM-LP (ETQPM KVC) Exemption R Series PCC-MM-LP (ETQPMRKVC) Oct. 7

11 Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±. Series PCC-MM-LP (ETQPM KVP) Series PCC-MM-LP (ETQPM KVN) Series PCC-MM-LP (ETQPM KVK) Don't wire on the pattern on shaded portion the PWB. The same as the left. The same as the left. Series PCC-MM-LP (ETQPM KVC) Exemption R.7 Series PCC-MM-LP (ETQPMRKVC) Don't wire on the pattern on shaded portion the PWB...9 The same as the left. As for Soldering Conditions and Safety Precautions (Power Choke Coils for Automotive application), Please see Data Files Oct. 7

12 Packaging Methods (Taping) Embossed Carrier Tape Dimensions in mm (not to scale) fd P P A B F E t t W P Tape running direction Series A B W E F P P P fd t t PCC-MM-LP PCC-MM-LP PCC-MM-LP PCC-MM-LP Taping Reel Dimensions in mm (not to scale) E C B A D W Series A B C D E W PCC-MM-LP PCC-MM-LP 7. PCC-MM-LP () PCC-MM-LP. Component Placement (Taping) Terminal Series MM-LP MM-LP MM-LP MM-LP Standard Packing Quantity/Reel Series Part No. Minimum Quantity / Packing Unit Quantity per reel PCC-MM-LP ETQPM KVP, pcs. / box ( reel), pcs. PCC-MM-LP ETQPM KVN, pcs. / box ( reel), pcs. PCC-MM-LP ETQPM KVK, pcs. / box ( reel) pcs. PCC-MM-LP ETQPM KVC, pcs. / box ( reel) pcs. Oct. 7