YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents
|
|
|
- Lydia Patrick
- 5 years ago
- Views:
Transcription
1 YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type is suitable for high density mounting. Flat bottom surface allows for reliable mounting onto the board. Soldering conditions can be easily confirmed when mounting onto the board. Provide with embossed carrier type packaging for automatic mounting machine. PRODUCT IDENTIFICATION SLF - - International No. Tolerance Inductance Packaging Style Dimensions Product Symbol Applications Portable telephones, computers, hard disk divers and Other electronic equipment. Packaging: T : Tape and Reel Tolerance: M: ±20% Note: YAGEO will start to release SLF Series inductors with lead-free terminals which meet SONY SS-00259's criteria for lead-free product in Q2 of 2004, and YAGEO Internal No will be changed to N as identification. Ex. SLF0628T-4R7M-N Shapes and Dimensions Winding Start Mark A TYPE A B C D E F G Weight SLF ± ± ± typ 2 typ 4.0 typ 0.9 typ Dimensions : mm 330 B SLF ± ± ± typ 2 typ 4.9 typ 0.9 typ Marking (Inductance Code) C E SLF ± ± ± typ 2 typ 4.9 typ 0.9 typ SLF ± ± ± typ 2 typ 4.9 typ 0.9 typ SLF ± ± ± typ 2 typ 4.9 typ 0.9 typ SLF ± ± ± typ 3 typ 6 typ 2 typ F G SLF ± ± ± typ 3 typ 8.6 typ 2 typ SLF ± ± ± typ 3 typ 8.6 typ 2 typ D SLF ± ± ± typ 3 typ 8.6 typ 2 typ
2 229 electrical characteristics SLF0628 series Part No. Inductance Tolerance TEST dc Rated Itemp (µh) (±%) frequency Resistance current (A) Max. L(KHz) (Ω) ± 20% (A) Max. SLF0628T-4R7M-S SLF0628T-6R8M-S SLF0628T-100M-S SLF0628T-150M-S SLF0628T-220M-S SLF0628T-330M-S SLF0628T-470M-S SLF0628T-680M-S SLF0628T-101M-S IDC Current : Value obtained when DC current flows and the initial value of inductance has fallen by 30%. Itemp Current : Value obtained when current flows and the temperature has risen to 25 C. Test Equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC IDC Itemp (µh) Frequency (Ω) ± 20% (A)Max (A) Max. SLF0628T-4R7 -N V 1KHZ SLF0628T-6R8 -N V 1KHZ SLF0628T-100 -N V 1KHZ SLF0628T-150 -N V 1KHZ SLF0628T-220 -N V 1KHZ SLF0628T-330 -N V 1KHZ SLF0628T-470 -N V 1KHZ SLF0628T-680 -N V 1KHZ SLF0628T-101 -N V 1KHZ
3 230 electrical characteristics SLF0728 series Part No. Inductance Tolerance Test Frequency DC Resistance Rated current (µh) (±%) L(KHz) (Ω) ± 20% (A) Max. SLF0728T-3R3M-S SLF0728T-4R7M-S SLF0728T-6R8M-S SLF0728T-100M-S SLF0728T-150M-S SLF0728T-220M-S SLF0728T-330M-S SLF0728T-470M-S IDC current : Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Test Equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC Rated Current (µh) Frequency (Ω) ± 20% (A)Max SLF0728T-3R3 -N V 1KHZ SLF0728T-4R7 -N V 1KHZ SLF0728T-6R8 -N V 1KHZ SLF0728T-100 -N V 1KHZ SLF0728T-150 -N V 1KHZ SLF0728T-220 -N V 1KHZ SLF0728T-330 -N V 1KHZ SLF0728T-470 -N V 1KHZ
4 231 electrical characteristics SLF0730 series Part No. Inductance Tolerance Test Frequency DC Resistance Rated current (µh) (±%) L(KHz) (Ω) ± 20% (A) Max. SLF0730T-3R3M-S SLF0730T-4R7M-S SLF0730T-6R8M-S SLF0730T-100M-S SLF0730T-150M-S SLF0730T-220M-S SLF0730T-330M-S SLF0730T-470M-S SLF0730T-680M-S SLF0730T-101M-S IDC Current : Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Test Equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC Rated Current (µh) Frequency (Ω) ± 20% (A)Max SLF0730T-3R3 -N V 1KHZ SLF0730T-4R7 -N V 1KHZ SLF0730T-6R8 -N V 1KHZ SLF0730T-100 -N V 1KHZ SLF0730T-150 -N V 1KHZ SLF0730T-220 -N V 1KHZ SLF0730T-330 -N V 1KHZ SLF0730T-470 -N V 1KHZ SLF0730T-680 -N V 1KHZ SLF0730T-101 -N V 1KHZ
5 232 electrical characteristics SLF0732 series Part No. Inductance Tolerance Test Frequency DC Resistance Rated current (µh) (±%) L(KHz) (Ω) ± 20% (A) Max. SLF0732T-3R3M-S SLF0732T-4R7M-S SLF0732T-6R8M-S SLF0732T-100M-S SLF0732T-150M-S SLF0732T-220M-S SLF0732T-330M-S SLF0732T-470M-S SLF0732T-680M-S SLF0732T-101M-S SLF0732T-151M-S SLF0732T-221M-S SLF0732T-331M-S SLF0732T-471M-S SLF0732T-681M-S SLF0732T-102M-S IDC current : Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Test Equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC Rated Current (µh) Frequency (Ω) ± 20% (A)Max SLF0732T-2R2 -N V 1KHZ SLF0732T-3R3 -N V 1KHZ SLF0732T-4R7 -N V 1KHZ SLF0732T-6R8 -N V 1KHZ SLF0732T-100 -N V 1KHZ SLF0732T-150 -N V 1KHZ SLF0732T-220 -N V 1KHZ SLF0732T-330 -N V 1KHZ SLF0732T-470 -N V 1KHZ SLF0732T-680 -N V 1KHZ SLF0732T-101 -N V 1KHZ SLF0732T-151 -N V 1KHZ SLF0732T-221 -N V 1KHZ SLF0732T-331 -N V 1KHZ SLF0732T-471 -N V 1KHZ SLF0732T-681 -N V 1KHZ SLF0732T-102 -N V 1KHZ
6 233 electrical characteristics SLF0745 series Part No. Inductance Tolerance TEST dc Rated Itemp (µh) (±%) frequency Resistance current (A) Max. L(KHz) (Ω) ± 20% (A) Max. SLF0745T-3R3M-S SLF0745T-4R7M-S SLF0745T-6R8M-S SLF0745T-100M-S SLF0745T-150M-S SLF0745T-220M-S SLF0745T-330M-S SLF0745T-470M-S SLF0745T-680M-S SLF0745T-101M-S SLF0745T-151M-S SLF0745T-221M-S SLF0745T-331M-S SLF0745T-471M-S SLF0745T-681M-S SLF0745T-102M-S IDC current : Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Itemp current : Value obtained when current flows and the temperature has risen to 20 C. Test Equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC IDC Itemp (µh) Frequency (Ω) ± 20% (A)Max (A) Max. SLF0745T-3R3 -N V 1KHZ SLF0745T-4R7 -N V 1KHZ SLF0745T-6R8 -N V 1KHZ SLF0745T-100 -N V 1KHZ SLF0745T-150 -N V 1KHZ SLF0745T-220 -N V 1KHZ SLF0745T-330 -N V 1KHZ SLF0745T-470 -N V 1KHZ SLF0745T-680 -N V 1KHZ SLF0745T-101 -N V 1KHZ SLF0745T-151 -N V 1KHZ SLF0745T-221 -N V 1KHZ SLF0745T-331 -N V 1KHZ SLF0745T-471 -N V 1KHZ SLF0745T-681 -N V 1KHZ SLF0745T-102 -N V 1KHZ
7 234 electrical characteristics SLF1045 series Part No. Inductance Tolerance TEST dc Rated Itemp (µh) (±%) frequency Resistance current (A) Max. L(KHz) (Ω) ± 20% (A) Max. SLF1045T-100M-S SLF1045T-150M-S SLF1045T-220M-S SLF1045T-330M-S SLF1045T-470M-S SLF1045T-680M-S SLF1045T-101M-S SLF1045T-151M-S SLF1045T-221M-S SLF1045T-331M-S SLF1045T-471M-S SLF1045T-681M-S SLF1045T-102M-S SLF1045T-152M-S IDC current : Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Itemp current : Value obtained when current flows and the temperature has risen to 30 C. Test Equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC IDC Itemp (µh) Frequency (Ω) ± 20% (A)Max (A) Max. SLF1045T-100 -N V 1KHZ SLF1045T-150 -N V 1KHZ SLF1045T-220 -N V 1KHZ SLF1045T-330 -N V 1KHZ SLF1045T-470 -N V 1KHZ SLF1045T-680 -N V 1KHZ SLF1045T-101 -N V 1KHZ SLF1045T-151 -N V 1KHZ SLF1045T-221 -N V 1KHZ SLF1045T-331 -N V 1KHZ SLF1045T-471 -N V 1KHZ SLF1045T-681 -N V 1KHZ SLF1045T-102 -N V 1KHZ SLF1045T-152 -N V 1KHZ
8 235 electrical characteristics SLF1255 series Part No. Inductance Tolerance TEST dc Rated Itemp (µh) (±%) frequency Resistance current (A) Max. (KHz) (Ω) ± 20% (A) Max. SLF1255T-6R0M-S SLF1255T-100M-S SLF1255T-150M-S SLF1255T-220M-S SLF1255T-330M-S SLF1255T-470M-S SLF1255T-680M-S SLF1255T-101M-S SLF1255T-151M-S SLF1255T-221M-S SLF1255T-331M-S SLF1255T-471M-S SLF1255T-681M-S SLF1255T-102M-S SLF1255T-152M-S IDC current : Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Itemp current : Value obtained when current flows and the temperature has risen to 30 C. Test Equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC IDC Itemp (µh) Frequency (Ω) ± 20% (A)Max (A) Max. SLF1255T-6R0 -N 6 0.5V 1KHZ SLF1255T-100 -N V 1KHZ SLF1255T-150 -N V 1KHZ SLF1255T-220 -N V 1KHZ SLF1255T-330 -N V 1KHZ SLF1255T-470 -N V 1KHZ SLF1255T-680 -N V 1KHZ SLF1255T-101 -N V 1KHZ SLF1255T-151 -N V 1KHZ SLF1255T-221 -N V 1KHZ SLF1255T-331 -N V 1KHZ SLF1255T-471 -N V 1KHZ SLF1255T-681 -N V 1KHZ SLF1255T-102 -N V 1KHZ SLF1255T-152 -N V 1KHZ
9 236 electrical characteristics SLF1265 series Part No. Inductance Tolerance TEST dc Rated Itemp (µh) (±%) frequency Resistance current (A) Max. (KHz) (Ω) ± 20% (A) Max. SLF1265T-2R0M-S SLF1265T-4R2M-S SLF1265T-7R0M-S SLF1265T-100M-S SLF1265T-150M-S SLF1265T-220M-S SLF1265T-330M-S SLF1265T-470M-S SLF1265T-680M-S SLF1265T-101M-S SLF1265T-221M-S IDC current : Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Itemp current : Value obtained when current flows and the temperature has risen to 40 C. Test equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC IDC Itemp (µh) Frequency (Ω) ± 20% (A)Max (A) Max. SLF1265T-2R0 -N 2 0.5V 1KHZ SLF1265T-4R2 -N V 1KHZ SLF1265T-7R0 -N 7 0.5V 1KHZ SLF1265T-100 -N V 1KHZ SLF1265T-150 -N V 1KHZ SLF1265T-220 -N V 1KHZ SLF1265T-330 -N V 1KHZ SLF1265T-470 -N V 1KHZ SLF1265T-680 -N V 1KHZ SLF1265T-101 -N V 1KHZ SLF1265T-221 -N V 1KHZ
10 237 electrical characteristics SLF1275 series Part No. Inductance Tolerance TEST dc Rated Itemp (µh) (±%) frequency Resistance current (A) Max. (KHz) (Ω) ± 20% (A) Max. SLF1275T-1R2M-S SLF1275T-2R7M-S SLF1275T-3R9M-S SLF1275T-5R6M-S SLF1275T-6R8M-S SLF1275T-100M-S SLF1275T-150M-S SLF1275T-220M-S SLF1275T-330M-S SLF1275T-470M-S SLF1275T-680M-S SLF1275T-101M-S SLF1275T-151M-S SLF1275T-221M-S IDC Current : Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Itemp Current : Value obtained when current flows and the temperature has risen to 40 C. Test Equipment Inductance : HP4192A LF Impedance Analyzer or Equivalent (Test Frequency : 1KHz/0.5V) Part No. Inductance Test RDC IDC Itemp (µh) Frequency (Ω) ± 20% (A)Max (A) Max. SLF1275T-1R2T-N V 1KHZ SLF1275T-2R7T-N V 1KHZ SLF1275T-3R9T-N V 1KHZ SLF1275T-5R6T-N V 1KHZ SLF1275T-6R8T-N V 1KHZ SLF1275T-100 -N V 1KHZ SLF1275T-150 -N V 1KHZ SLF1275T-220 -N V 1KHZ SLF1275T-330 -N V 1KHZ SLF1275T-470 -N V 1KHZ SLF1275T-680 -N V 1KHZ SLF1275T-101 -N V 1KHZ SLF1275T-151 -N V 1KHZ SLF1275T-221 -N V 1KHZ / T=±30%
11 238 Tape Dimensions TAPE MATERIAL Camer Tape : Polystyrene Cover Type : Polyethylene P0 P2 K0 K0 E W D Plastic Paper P Cover Tape 160mm Min. Blank Part Chip Mounting Part Blank 330mm Min. Leader REEL DIMENSIONS Recommended Pattern A B C B A C D D TYPE TAPE RECOMMENDEd REEL QUANTITY dimensions pattern dimensions pcs/reel k0 D E W P P0 P2 A B c D A B C D SLF SLF SLF SLF SLF SLF SLF SLF SLF Dimensions : mm
12 239 slf SERIES RELIABILITY TEST 1-1 MECHANICAL PERFORMANCE NO. ITEM SPECIFICATION TEST CONDITIONS Vibration Appearance : No Damage Test device shall be soldered on the substrate. L Change : within ±10% Oscillation Frequency : 10 to 55 to 10Hz for 1Min. Q Change : within ±30% Amplitude : 1.5mm RDC : within Specification Time : 2Hrs. for each Axis (X, Y & Z), Total 6Hrs Resistance to Appearance : No Damage Pre-heating : 150 C, 1Min. Soldering Heat Solder Composition : Sn/Pb = 63/37 Solder Temperature : 260 ± 5 C Immersion Time : 10 ± 1Sec Solderability The electrodes shall be at least 90% covered Pre-heating : 150 C, 1Min. with new solder coating. Solder Composition : Sn/Pb = 63/37 Solder Temperature : 230 ± 5 C Immersion Time : 4 ± 1Sec. 1-2 ENVIRONMENTAL PERFORMANCE NO. ITEM SPECIFICATION TEST CONDITIONS Temperature Shock Appearance : No Damage 10 Cycles (Air to Air) 1 Cycles shall Consist of : L Change : within ±10% 30Min. Exposure to -55 C L Change : within ±30% 30Min. Exposure to 125 C RDC : within Specification 15Sec. Max. Transition between Temperatures Measured after Exposure in the Room Condition for 24Hrs Temperature Cycle One Cycle Step Temperature ( C) Time (Min.) 1-25 ± ± ± ± 2 3 Total : 100 Cycles Measured after Exposure in the Room Condition for 24Hrs Humidity Resistance Temperature : 40 ± 2 C Relative Humidity : 90 ~ 95% Time : 1000Hrs. Measured after Exposure in the Room Condition for 24Hrs High Temperature Temperature : 85 ± 3 C Resistance Relative Humidity : 20% Applied Current : Rated Current Time : 1000Hrs. Measured after Exposure in the Room Condition for 24Hrs Low Temperature Temperature : -25 ± 3 C Resistance Relative Humidity : 0% Time : 1000Hrs. Measured after Exposure in the Room Condition for 24Hrs.
13 240 RECOMMEND SOLDERING CONDITIONS for:cl/ CLH/ SQV/ SMD power inductors/ SMD Chip Beads/ SMD Filters, Transformers, Current Sensors temperature C pre-heating soldering natural cooling 260 C 230 C 160 C 150 C 60 second time:second 120 second 80 second 5~10 second for: lead solder for: lead-free solder
14 YAGEO CORPORATION SMD INDUCTOR / BEADS SLF 1055 Series Low Profile Low Power Low & high Current For SSL series provide excellent current carrying capabilities in a small footprint. They have a flat top for reliable pick and place operations and features robust temperature deflection. In addition to the standard versions shown here, custom inductors are available to meet your exact requirement. Applications Portable telephones, computers, hard disk drives and other electronic equipment Operating Temperature: -20 C~85 C Features Low resistance and high currents Packaging: T : Tape and Reel Tolerance : M : ±20% Note: YAGEO has released lead-free products of SLF Series and Internal No. will be changed to N as identification. Ex. SLF1055T-100M-N PRODUCT IDENTIFICATION Slf - - International No. Tolerance Inductance Packaging Style Dimensions Product Symbol shapes and dimensions Recommended Pattern A C E A B Winding start mark Marking (Inductance code) 330 B D F G D C Dimensions : mm A B C d E F G 10.1± ± ± TYP 3TYP 6.0TYP 2.0TYP Dimensions : mm A B C d
15 242 electrical characteristics Part No. Inductance Tolerance TEST dc Rated (µh) (±%) frequency Resistance current l(khz) (Ω) ± 20% (A) Max. SLF1055T-100M-S SLF1055T-330M-S Rated current: Value obtaned when DC current flows and the initial value of inductance has by 15% Test equipment Inductance: HP4192A LF impedance analyzer or equivalent(test frequency: 1KHz/0.5V) RDC: CH502BC Digital multimeter, or equivalent. Packaging Specifications Tape Dimensions Tape Material Reel Dimensions P 0 P2 K0 Carrier tape: Polystyrene Cover type: Polyethylene W D E P la stic P a per C B A P K0 Cover Tape 160mm MIN. Blank Part Chip Mounting Part Blank 330mm MIN. Leader D TYPE TAPE dimensions REEL dimensions QUANtity k0 D E W p P0 P2 A B C d pcs/reel SLF RECOMMEND SOLDERING CONDITIONS for:cl/ CLH/ SQV/ SMD power inductors/ SMD Chip Beads/ SMD Filters, Transformers, Current Sensors temperature C pre-heating soldering natural cooling 260 C 230 C 160 C 150 C 60 second time:second 120 second 80 second 5~10 second for: lead solder for: lead-free solder
YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
YAGEO CORPORATION SMD INDUCTOR / BEADS
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design
Cal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
Power Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
(TRMA) Multilayer Ferrite Beads Chip Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TRMA) Multilayer Ferrite Beads Chip Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MNR - 4010-4R7 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 104R - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCH - 5750C - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
(TRMB) Multilayer Bead RF Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TRMB) Multilayer Bead RF Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
INDEX. ISO-9002 Certified YAGEO CORPORATION
INDE 2 Multilayer Ferrite Chip Beads [ SB/PB/UP/NB/GB Series ] 22 Multilayer Ferrite Chip Beads [ BA Series ] 26 Surface Mount Beads [ FB Series ] 3 EMI PC Beads [ SBC Series ] 33 Data Line EMI Filter
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means
Wire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100808 - R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI- 700705- R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
Shielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
Molding Power Choke HPPC Series. HPPC Series. Product Identification
HPPC Series HPPC series is low profile molding power choke with low RDC and high Q factor, so the efficiency performance is also superior. Its molded magnetic shielded type is suitable for high-density
Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS
CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables
ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
Power Inductor MHCC/MHCI Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering MHCI 42-1R M - R8AU Series Name Dimensions Code Inductance (mm) (uh) Tolerance Internal Code 412 4.1x4.6x1.2 R22.22 M ±2% R8AU 42B 4.2x4.7x2.
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for MSI-110808V-SERIES- - Warn : This product series can t be used in synchronous rectification circuit that is over 24V.
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for MSI-110812V-SERIES- - Warn : This product series can t be used in synchronous rectification circuit that is over 24V.
Power Inductor SCD Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering SCD 321 T - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 321 3.3x3.x2.1 R47.47 K ±1% 43 4.5x4.x3.2 1R 1.
Chip Bead UPB Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering UPB 155 T - 6 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 155 1.x.5x.5 T Tape and eel 6 6 Y ±25% 1685 1.6x.8x.5
(TREC) Wire Wound RF Chip Inductor
Version: February 21, 2017 (TREC) Wire Wound RF Chip Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
January Inductors for power circuits. Wound metal. SPM-HZ series (for automotive) SPM6530-HZ type SPM6530-HZ
I N D U C T O R S January 2018 Inductors for power circuits Wound metal SPM-HZ series (for automotive) SPM6530-HZ (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded RLF series Type: RLF7030 (7.3x6.8 mm) RLF12545 (12.5x12.8 mm) RLF12560 (12.5x12.8 mm) Issue date: September 2011 (1/6) Inductors for Power Circuits
Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications
Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
Vectron International Temperatur sensor specification TFSS434B 1/6
Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics
Commom Mode Choke CUW Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering CUW 43 T - T - AU Series Name Dimensions Code Inductance Category (mm) (uh) Tolerance 43 4.5x3.2x2.6 T 51 T ±30% M 100 Internal Code Recommend
January Inductors for Power Circuits. Wound Ferrite. SLF Series. SLF7045 Type SLF7045
January 2015 Inductors for Power Circuits Wound Ferrite SLF Series SLF7045 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS
Chip Beads & Inductors
Chip Beads & Inductors Introduction Chip Components Guide SAMWHA s CB, CBA,CM, CD series of chip components consist of compact, high performance beads and inductors. Their innovative components and case
MICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
Multilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions
Multilayer Chip Bead Features Effective EMI protection Low DC resistance High soldering heat resistance Multiple size availability RoHS compliant Applications Computers and Peripheral Equipment VCRS, Television
SMT Ferrite Chip Inductor SFI201212S Series
Part : SFI201212S SERIES Version : AD Page : 1 / 7 Feature SMT Ferrite Chip Inductor SFI201212S Series Utilizing a miniaturized winding structure. These products provide high Q characteristics. Resin coated
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2012. All of the contents specified herein
April Inductors for Power Circuits. Wound Ferrite. SLF Series. SLF10165 Type SLF10165
April 2016 Inductors for Power Circuits Wound Ferrite SLF Series SLF10165 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS
Kun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
Vectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
Kun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
Wire Wound Chip Inductor
Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
Chip Bead PBY Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering PBY 155 T - 4 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 633.6x.3x.3 T Tape and eel 4 4 Y ±25% 155 1.x.5x.5
April Inductors for power circuits. Wound ferrite. SLF series. SLF12575 type SLF12575
I N D U C T O R S April 2018 Inductors for power circuits Wound ferrite SLF series SLF12575 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
Kun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
Shielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
Vectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
(TREM) High SRFs RF Inductor
Version: March 1, 2017 Electronics Tech. (TREM) High SRFs RF Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang
December Inductors for power circuits. Wound ferrite. VLS-EX-CA series (for automotive) VLS6045EX type VLS6045EX
I N D U C T O R S December 2017 Inductors for power circuits Wound ferrite VLS-EX-CA series (for automotive) VLS6045EX (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
RF Inductor Series. Token Electronics Industry Co., Ltd. Version: February 24, Web:
Version: February 24, 2017 RF Inductor Series Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei City, Taiwan,
ITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :
ESTABLISHMENT 2006. 06. 16 APPROVED REVISION 2006. 12. 19 Series NO:IP061219001 APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : You can reapprove only the changed quality request recorded in spec
Low Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
April Inductors for power circuits. Wound ferrite. SLF series. SLF7032 type SLF7032
I N D U C T O R S April 2018 Inductors for power circuits Wound ferrite SLF series SLF7032 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
Chip Beads & Inductors
Introduction SAMWHA s CB, CBA, CM, CPI series of chip components consist of compact, high performance beads and inductors. Their innovative components and case structures mean low DC resistance and outstanding
SPECIFICATION FOR APPROVAL PAGE: 1
PAGE: 1 CONFIGURATION & DIMENSIONS A A : 2.5±0.2 B : 2.0±0.1 C : 1.8±0.1 B E : 1.4±0.1 Not Marking F : 0.40 C 0. 1.5 0.9 1.5 0.9 F F E PCB Pattern SCHEMATIC DIAGRAM d MATERIALS a Core Ferrite DR core b
July Inductors for power circuits. Wound ferrite. RLF series. RLF7030 type RLF7030
I N D U C T O R S July 2017 Inductors for power circuits Wound ferrite RLF series RLF7030 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
August Inductors for power circuits. Wound ferrite. VLS-CX-1 series. VLS252010CX-1 type VLS252010CX-1
I N D U C T O R S August 2017 Inductors for power circuits Wound ferrite VLS-CX-1 series VLS252010CX-1 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
Configurations: Dimension (mm) 1.6 ±0.15 IMPC IMPC ± IMPC ±0.2 IMPC IMPC ± IMPC ±0.
SMD Multilayer Power Inductors IMPC160808, IMPC201206, IMPC201210, IMPC201212, IMPC201610, IMPC252010, IMPC252012, IMPC321606, IMPC322510 Configurations: FEATURES Magnetically shielded configuration for
Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
Vectron International Filter specification TFS 869K 1/5
Vectron International Filter specification TFS 869K 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
VI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
(TPSDC) SMD Low-DCR Power Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TPSDC) SMD Low-DCR Power Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
April Inductors for Power Circuits. Wound Ferrite. VLS-CX Series. VLS201610CX Type VLS201610CX
April 2016 Inductors for Power Circuits Wound Ferrite VLS-CX Series VLS201610CX (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
Vectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
MULTILAYER CHIP INDUCTORS
CONTENTS PAGE GENERAL INFORMATION.............................................................. 243 HIGH FREQUENCY - L63H.......................................................... 245 HIGH FREQUENCY -
Notice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
RF Inductor Series. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 23, 2018
Version: July 23, 2018 Electronics Tech. RF Inductor Series Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang Ye Road,
March Inductors for Power Circuits. Wound Metallic Magnetic Material. SPM Series. SPM3012 Type SPM3012
March 2015 Inductors for Power Circuits Wound Metallic Magnetic Material SPM Series SPM3012 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
SLFseries. Inductors for Power Circuits. Wound Ferrite SLF6025 SLF6028 SLF6045 SLF7032 SLF7045 SLF7055 SLF10145 SLF10165 SLF12555 SLF12565 SLF12575
February 2014 Inductors for Power Circuits Wound Ferrite SLFseries SLF6025 SLF6028 SLF6045 SLF7032 SLF7045 SLF7055 SLF10145 SLF10165 SLF12555 SLF12565 SLF12575 (2/49) REMINDERS FOR USING THESE PRODUCTS
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]
![Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]](/thumbs/90/101820522.jpg "Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]")
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2018.
CHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)
CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal
VI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
DATA SHEET CURRENT SENSOR - LOW TCR PR/PF series (Pb Free) 5%, 1% sizes 1206/2010/2512. Product specification Aug 11, 2005 V.0
h DATA SHEET CURRENT SENSOR - LOW TCR series (Pb Free) 5%, 1% sizes 1206/2010/2512 2 SCOPE This specification describes series current sensor - low TCR with lead-free terminations. ORDERING INFORMATION
January Inductors for power circuits. Wound ferrite. CLF-NI-D series (for automotive) CLF7045NI-D type CLF7045NI-D
I N D U C T O R S January 2018 Inductors for power circuits Wound ferrite CLF-NI-D series (for automotive) CLF7045NI-D (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
January Inductors for power circuits. Wound ferrite. CLF-NI-D series (for automotive) CLF5030NI-D type CLF5030NI-D
I N D U C T O R S January 2018 Inductors for power circuits Wound ferrite CLF-NI-D series (for automotive) CLF5030NI-D (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to
March Inductors for Power Circuits. Wound Metallic Magnetic Material. SPM Series. SPM4015 Type SPM4015
March 2015 Inductors for Power Circuits Wound Metallic Magnetic Material SPM Series SPM4015 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
SPECIFICATION FOR APPROVAL
Ⅰ. Configuration and dimensions: REV. 20160715-P PAGE 1/8 Marking Inductance code A' C H F A A' C E F G H 3.20 ±0.4 2.90 ±0.2 2.50 ±0.2 2.20 ±0.2 ±0.2 +0.3 0.60-0.0 1.80 1.40 Ⅱ. Description: a. Ferrite
VI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
VI TELEFILTER Filter specification TFS 70Z 1/5
VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics
CHIP FERRITE BEADS ARRAY
CHIP FERRITE BEADS ARRAY Features 1. Availabe in a wide range of impedance values and providing excellent EMI suppression characteristics for various types of noise. 2. Line(3,4) is achievable with a single
Low Profile High Current Shielded Inductor TL2020SG11 (5.49x5.18x3.0mm)
ow Profile High Current Shielded Inductor TSG (.9x.x3.mm) FEATURES: APPICATIONS: owest height (3.mm) in this package footprint PDA/notebook/desktop/server applications Operating temperature range - C to
Vectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
VI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
INPAQ. Specification. MCB 1005 B Series. Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ Global RF/Component Solutions
MCB 1005 B Series Specification Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ 1005 RoHS Pb Chip Ferrite Bead (MCB-B Series) Engineering Spec. This product belongs to the industrial grade
Inductors for Standard Circuits
Inductors for Standard Circuits Wound/STD magnetic shielded NLFV/NLFC series Type: NLFV25 NLFV2 NLFC4522 2520[8 inch]* 225[2 inch] 452[82 inch] * Dimensions Code JIS[EIA] Issue date: September 20 (/6)
June Inductors for Power Circuits. Wound Ferrite. VLF-M Series. VLF302512MT Type VLF302512MT. Caution. May 18, Mar.
I N D U C T O R S June 2017 Inductors for Power Circuits Wound Ferrite VLF-M Series VLF302512MT Caution May 18, 2017 Mar. 29, 2019 Sep. 30, 2019 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these
November Inductors for power circuits. Wound metal. SPM series. SPM10040 type SPM10040
I N D U C T O R S November 2017 Inductors for power circuits Wound metal SPM series SPM10040 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
Vectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
VI TELEFILTER Filter specification TFS 915D 1/5
Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation
Notice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For High Quality and/or Reliability Equipment (Automotive / Industrial Equipment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information
June Inductors for power circuits. Wound ferrite. VLS-E series. VLS4012E type VLS4012E. Caution
I N D U C T O R S June 2017 Inductors for power circuits Wound ferrite VLS-E series VLS4012E Caution (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
SMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions
SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter
February Inductors for power circuits. Wound metal. SPM series. SPM5030 type SPM5030
I N D U C T O R S February 2018 Inductors for power circuits Wound metal SPM series SPM5030 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
SPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 1 PRODUCT DETAIL 2-3 REEL DIMENSIONS 4 REEL PACKAGING QUANTITY 4 RELIABILITY AND TEST CONDITION.. 5 RECOMMENDED