Inductors for Standard Circuits

Transcription

1 Inductors for Standard Circuits Wound/STD magnetic shielded NLFV/NLFC series Type: NLFV25 NLFV2 NLFC [8 inch]* 225[2 inch] 452[82 inch] * Dimensions Code JIS[EIA] Issue date: September 20

2 (/6) Inductors for Standard Circuits Wound/STD Magnetic Shielded Conformity to RoHS Directive NLFV Series NLFV25 FEATURES The product has good heat durability that withstands lead-free compatible reflow soldering conditions. Lead-free material is used for the plating on the terminal. The product uses metal terminals, which realize excellent connection reliability. From µh to µh, all of the products are available in the E-6 series. This product is in compliance with the RoHS Directive. Other products with specifications that do not include exemption regulations are also available. APPLICATIONS Audio-visual equipment including TVs, VCRs and digital cameras. Electronic equipment used in communication infrastructures including xdsl and mobile base stations. Electronic equipment used in onboard automobile equipment including car audio and ECU systems. Other electronic equipment including HDDs and ODDs. SPECIFICATIONS Operating temperature range Storage temperature range 40 to +5 C [Including self-temperature rise] 40 to +5 C RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 255 C 20 C 80 C 50 C s max. 90 to 20s 40s max. IRON SOLDERING Tip temperature 00 to 50 C Heating time seconds/soldering Soldering rod specifications Output: 0W Tip diameter: mm Based on the above conditions, use a maximum product temperature of 260 C and a maximum accumulated heating time of seconds as a guideline. Please contact us for details. PRODUCT IDENTIFICATION NLFV 25 T- 2R2 M -PF () (2) () (4) (5) (6) () Series name (2) Dimensions mm (L W T) () Packaging style T (4) value (5) tolerance (6) Lead-free compatible product Taping (reel) R0 µh µh µh K ±% M ±20% PF EF PACKAGING STYLE AND QUANTITIES Packaging style Taping Conformity to RoHS directive, exemption regulations apply Conformity to RoHS directive Quantity 2000 pieces/reel FLOW SOLDERING 260 C max. s max. 70 C 50 C 60 to 20s 00-0 / / e5_nl_02

3 (2/6) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Inductor Solder land pattern Terminal electrode 2.5±0.2 2± ±0. (0.4).4±0. Weight:25mg Dimensions in mm ELECTRICAL CHARACTERISTICS (µh) tolerance Q ref. Test frequency L,Q (MHz) Self-resonant frequency (MHz)min. DC resistance (Ω)±20% Rated current (ma)max. Part No. ±20% NLFV25T-R0M- 2.5 ±20% NLFV25T-R5M- 2.2 ±20% NLFV25T-2R2M-. ±20% NLFV25T-RM- 4.7 ±20% NLFV25T-4R7M- 6.8 ±20% NLFV25T-6R8M- ±% NLFV25T-K- 5 ±% NLFV25T-50K- 22 ±% NLFV25T-220K- ±% NLFV25T-0K- 47 ±% NLFV25T-470K- 68 ±% NLFV25T-680K- ±% NLFV25T-K- Rated current: Value obtained when current flows and the temperature has risen to 20 C or when DC current flows and the initial value of inductance has fallen by %, whichever is smaller. 2 : Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive) Test equipment L, Q: HP494A IMPEDANCE ANALYZER(6085A+609B+TDK TF-) SRF: HP875C NETWORK ANALYZER Rdc: MATSUSHITA VP-294A DIGITAL MILLIOHM METER TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 0 00 Test circuit L=0.H C=20000µF A DC Specimen µh HP model-4275a or equivalent Universal bridge 0 µh (µh) 0 µh µh Impedance(kΩ) µh µh DC current(ma) Frequency(MHz) 00-0 / / e5_nl_02

4 (/6) Inductors for Standard Circuits Wound/STD Magnetic Shielded Conformity to RoHS Directive NLFV Series NLFV2 FEATURES The product has good heat durability that withstands lead-free compatible reflow soldering conditions. Lead-free material is used for the plating on the terminal. The product uses metal terminals, which realize excellent connection reliability. From µh to 0µH, all of the products are available in the E-6 series. This product is in compliance with the RoHS Directive. Other products with specifications that do not include exemption regulations are also available. APPLICATIONS Audio-visual equipment including TVs, VCRs and digital cameras. Electronic equipment used in communication infrastructures including xdsl and mobile base stations. Electronic equipment used in onboard automobile equipment including car audio and car navigation systems. Other electronic equipment including HDDs and ODDs. SPECIFICATIONS Operating temperature range Storage temperature range 40 to +5 C [Including self-temperature rise] 40 to +5 C RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 255 C 20 C 80 C 50 C s max. IRON SOLDERING Tip temperature 00 to 50 C Heating time seconds/soldering Soldering rod specifications Output: 0W Tip diameter: mm Based on the above conditions, use a maximum product temperature of 260 C and a maximum accumulated heating time of seconds as a guideline. Please contact us for details. PRODUCT IDENTIFICATION NLFV 2 T- 2R2 M -EF () (2) () (4) (5) (6) () Series name (2) Dimensions mm (L W T) () Packaging style T (4) value (5) tolerance (6) Lead-free compatible product Taping (reel) R0 µh µh µh K ±% M ±20% EF PACKAGING STYLE AND QUANTITIES Packaging style Taping Conformity to RoHS directive Quantity 2000 pieces/reel 90 to 20s 40s max. FLOW SOLDERING 260 C max. s max. 70 C 50 C 60 to 20s 00-0 / / e5_nl_02

5 (4/6) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Terminal electrode.2± ±0.2 (0.4) ±0.2.9±0. Weight: 50mg Inductor Solder land pattern Dimensions in mm ELECTRICAL CHARACTERISTICS (µh) tolerance Q ref. Test frequency L,Q (MHz) Self-resonant frequency (MHz)min. DC resistance (Ω)±20% Rated current (ma)max. Part No. ±20% NLFV2T-R0M-EF.5 ±20% NLFV2T-R5M-EF 2.2 ±20% NLFV2T-2R2M-EF. ±20% NLFV2T-RM-EF 4.7 ±20% NLFV2T-4R7M-EF 6.8 ±20% NLFV2T-6R8M-EF ±% NLFV2T-K-EF 5 ±% NLFV2T-50K-EF 22 ±% NLFV2T-220K-EF ±% NLFV2T-0K-EF 47 ±% NLFV2T-470K-EF 68 ±% NLFV2T-680K-EF ±% NLFV2T-K-EF 50 ±% NLFV2T-5K-EF 220 ±% NLFV2T-22K-EF 0 ±% NLFV2T-K-EF 470 ±% NLFV2T-47K-EF 680 ±% NLFV2T-68K-EF 0 ±% NLFV2T-2K-EF Rated current: Value obtained when current flows and the temperature has risen to 20 C or when DC current flows and the initial value of inductance has fallen by %, whichever is smaller. Test equipment L, Q: HP494A IMPEDANCE ANALYZER(6085A+609B+TDK TF-) or equivalent SRF: HP875C NETWORK ANALYZER or equivalent Rdc: MATSUSHITA VP-294A DIGITAL MILLIOHM METER or equivalent TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS (µh) 0 µh µh µh 0µH IMPEDANCE vs. FREQUENCY CHARACTERISTICS 000 Impedance(Ω) 00 0 µh µh µh 0µH DC current(ma) 0. Frequency(MHz) 00-0 / / e5_nl_02

6 (5/6) Inductors for Standard Circuits Wound/STD Magnetic Shielded Conformity to RoHS Directive NLFC Series NLFC4522 FEATURES The NLFC series features magnetic shielding and is recommended for power supply line applications. The product has good heat durability that withstands lead-free compatible reflow soldering conditions. Lead-free material is used for the plating on the terminal. The product uses metal terminals, which realize excellent connection reliability. From µh to 0µH, all of the products are available in the E-6 series. It is a product conforming to RoHS directive. APPLICATIONS Electronic equipment used in communication infrastructures including xdsl and mobile base stations. Audio-visual equipment including TVs and VCRs. Other electronic equipment including HDDs and ODDs. SPECIFICATIONS Operating temperature range Storage temperature range RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 255 C 20 C 80 C 50 C FLOW SOLDERING 90 to 20s 40s max. s max. 40 to +5 C [Including self-temperature rise] 40 to +5 C IRON SOLDERING Tip temperature 00 to 50 C Heating time seconds/soldering Soldering rod specifications Output: 0W Tip diameter: mm Based on the above conditions, use a maximum product temperature of 260 C and a maximum accumulated heating time of seconds as a guideline. Please contact us for details. PRODUCT IDENTIFICATION NLFC 4522 T- 2R2 M - PF () (2) () (4) (5) (6) ()Series name (2)Dimensions mm (L W T) ()Packaging style T (4) value (5) tolerance (6) Lead-free compatible product Taping (reel) R0 µh µh µh K ±% M ±20% PF PACKAGING STYLE AND QUANTITIES Packaging style Taping Lead-free compatible product Quantity 500 pieces/reel 260 C max. s max. 70 C 50 C 60 to 20s 00-0 / / e5_nl_02

7 (6/6) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Terminal electrode 4.5±0..2± ±0.2 C0.5 R Inductor Solder land pattern (0.6) 2.6±0. Weight: 80mg Dimensions in mm 2.8 ELECTRICAL CHARACTERISTICS Q Test frequency Self-resonant frequency DC resistance Rated current (µh) tolerance ref. L, Q (MHz) (MHz)min. (Ω)±0% (ma)max. Part No. ±20% NLFC4522T-R0M-PF.5 ±20% NLFC4522T-R5M-PF 2.2 ±20% NLFC4522T-2R2M-PF. ±20% NLFC4522T-RM-PF 4.7 ±20% NLFC4522T-4R7M-PF 6.8 ±20% NLFC4522T-6R8M-PF ±% NLFC4522T-K-PF 5 ±% NLFC4522T-50K-PF 22 ±% NLFC4522T-220K-PF ±% NLFC4522T-0K-PF 47 ±% NLFC4522T-470K-PF 68 ±% NLFC4522T-680K-PF ±% NLFC4522T-K-PF 50 ±% NLFC4522T-5K-PF 220 ±% NLFC4522T-22K-PF 0 ±% NLFC4522T-K-PF Rated current: Value obtained when current flows and the temperature has risen to 20 C or when DC current flows and the initial value of inductance has fallen by %, whichever is smaller. Test equipment L, Q: YHP494A IMPEDANCE ANALYZER+YHP6085A+YHP609B+TF-, or equivalent SRF:HP875C NETWORK ANALYZER (Zin=Zout=50Ω), or equivalent Rdc:MATSUSHITA VP-294A DIGITAL MILLIOHM METER, or equivalent TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS (µh) µH µh µh µh Test circuit L=5H C=20000µF A DC Specimen YHP model-4275a or equivalent Universal bridge Impedance(kΩ) µH µh µh µh DC current(ma) Frequency(MHz) 00-0 / / e5_nl_02