SMD Common Mode Choke CUWI Series. CUWI Series For HDMI, USB 3.0. Product Identification
|
|
|
- Gyles McCoy
- 6 years ago
- Views:
Transcription
1 CUWI Series For HDMI, USB 3.0 A full series of common mode choke is designed for excellent noise attenuation and compact sizing for use in wide range of applications. Both standard series and custom designs are available. Features RoHS Compliant Miniature SMD type common mode filter for fully automated assembly Excellent solderability Applications HDMI USB lines (for personal computers and peripheral), DVC, STB, LVDS, panel line for liquid display panels, etc. Product Identification Packaging: T:Tape and Reel Shape and Dimensions Recommended Pattern Dimensions in mm TYPE A B C D E CUWI ± ± ± CUWI ± ± ± Dimensions in mm TYPE A B C D CUWI CUWI
2 Electrical Characteristics Part Number Impedance (Ω) Tolerance (±%) Test Frequency (MHz) RDC (Ω) Max IDC (ma) Max Rated Voltage (Vdc) Insulation Resistance (MΩ) Min CUWI11T-600Y-N CUWI11T-900Y-N Note: When ordering, please specify tolerance code. Tolerance: Y=±25% Operating temperature range-40 ~105 (Including self - temperature rise) IDC for Inductance drop 10% from its value without current. Measure Equipment: Z:HP4286A/HP4287A/Agilent E4991A+Agilent16197A RDC:CHROMA MILLIOM METER MODE 16502(Single Wire Test Value) IDC:HP4284A+HP42841A/HP4285A+HP42841A Insulation Resistance:Agilent HP4339B Test Instruments:HP4291A Material/Impedance Analyzer Typical Impedance vs. Frequency COMMON MODE IIMPEDANCE(Ω) NORMAL MODE FREQUENCY(MHz)
3 CUWI11T-600Y-N
4 CUWI11T-900Y-N
5 Electrical Characteristics Part Number Insulation Impedance Tolerance Test Frequency RDC IDC Rated Voltage Resistance (Ω) (±%) (MHz) (Ω) Max (ma) Max (Vdc) (MΩ) Min CUWI21T-500Y-N CUWI21T-670Y-N CUWI21T-900Y-N CUWI21T-121Y-N CUWI21T-131Y-N Note: When ordering, please specify tolerance code. Tolerance: Y=±25% Operating temperature range-40 ~105 (Including self - temperature rise) IDC for Inductance drop 10% from its value without current. Measure Equipment: Z:HP4286A/HP4287A/Agilent E4991A+Agilent16197A RDC:CHROMA MILLIOM METER MODE 16502(Single Wire Test Value) IDC:HP4284A+HP42841A/HP4285A+HP42841A Insulation Resistance:Agilent HP4339B Test Instruments:HP4291A Material/Impedance Analyzer Typical Impedance vs. Frequency 1000 COMMON MODE IIMPEDANCE(Ω) NORMAL MODE FREQUENCY(MHz)
6 CUWI21T-500Y-N
7 CUWI21T-670Y-N
8 CUWI21T-900Y-N
9 CUWI21T-121Y-N
10 CUWI21T-131Y-N Insertion Loss For HDMI Testing: Insertion Loss For USB3.0 Testing: TDR For HDMI Testing: TDR For USB3.0 Testing: Eye Diagram For HDMI Testing: Eye Diagram For USB3.0 Testing:
11 SMD Common Mode Choke - CUWI Series Packaging Specifications B Tape Dimensions / ± 0.1 T 2.0 ± 0.05 F 1.75 ± 0.1 W Reel Dimensions K A P Trailer C Blank part (160mm min.) Blank Compartments with Cover Tape and Leader (330mm min.) Dimensions in mm TYPE Tape Dimensions Reel Dimensions Quantity A B T W P F K A B C D PCS / Reel CUWI CUWI
Common Mode Filters Type: TCM0605G [0202 inch]* TCM0806G [0302 inch] TCM1608G [0603 inch] * Dimensions Code [EIA]
![Common Mode Filters Type: TCM0605G [0202 inch]* TCM0806G [0302 inch] TCM1608G [0603 inch] * Dimensions Code [EIA]](/thumbs/86/94868523.jpg "Common Mode Filters Type: TCM0605G [0202 inch]* TCM0806G [0302 inch] TCM1608G [0603 inch] * Dimensions Code [EIA]")
Common Mode Filters For high-speed differential signal line TCM series Type: TCM0605G TCM0806G TCM608G [0202 inch]* [0302 inch] [0603 inch] * Dimensions Code [EIA] Issue date: September 20 (/6) Common
Commom Mode Choke CUW Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering CUW 43 T - T - AU Series Name Dimensions Code Inductance Category (mm) (uh) Tolerance 43 4.5x3.2x2.6 T 51 T ±30% M 100 Internal Code Recommend
Molding Power Choke HPPC Series. HPPC Series. Product Identification
HPPC Series HPPC series is low profile molding power choke with low RDC and high Q factor, so the efficiency performance is also superior. Its molded magnetic shielded type is suitable for high-density
Chip Beads & Inductors
Introduction SAMWHA s CB, CBA, CM, CPI series of chip components consist of compact, high performance beads and inductors. Their innovative components and case structures mean low DC resistance and outstanding
YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
Configurations: Dimension (mm) 1.6 ±0.15 IMPC IMPC ± IMPC ±0.2 IMPC IMPC ± IMPC ±0.
SMD Multilayer Power Inductors IMPC160808, IMPC201206, IMPC201210, IMPC201212, IMPC201610, IMPC252010, IMPC252012, IMPC321606, IMPC322510 Configurations: FEATURES Magnetically shielded configuration for
DATASHEET CUSTOMER : 승인번호 ISSUE DATA SHEET. We have approved the attached specification. Written by Checked by Approved by
CUSTOMER : 승인번호 ISSUE DATA SHEET Product Name : Part No : Revision Date : 2012/11/23 Customer Code : We have approved the attached specification. Written by Checked by Approved by CUSTOMER Signature R
2.0 EMI INTERFERENCE SUPPRESSION AND EMC ELECTROMAGNETIC COMPATIBILITY
SMD Beads and Chokes Introduction 1 INTRODUCTION To support designers and manufacturers of electronic circuitry, FERROX- CUBE manufactures a comprehensive line of ferrite EMI-suppression products for use
SPECIFICATION OF BSF- NR SERIES
SPECIFICATION OF BSF- NR SERIES FEATURES 1. Low profile construction and miniature size. 2. High magnetic shield construction and acted high performance for EMC/EMI protection. 3. Low coil resistance with
Wound Chip Baluns. ATB Series. Type: ATB ( mm) ATB ( mm) ATB M (
Wound Chip Baluns ATB Series Type: ATB-5 (...mm) ATB-75 (...mm) ATB-75M (...mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium,
July Common Mode Filters. For high-speed differential signal line, general signal line. ACM series. * Dimensions Code JIS[EIA]
![July Common Mode Filters. For high-speed differential signal line, general signal line. ACM series. * Dimensions Code JIS[EIA]](/thumbs/84/90998557.jpg "July Common Mode Filters. For high-speed differential signal line, general signal line. ACM series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s July 203 Common Mode Filters For high-speed differential signal line, general signal line ACM series ACM202 ACM2520 [0805 inch]* [008 inch] * Dimensions Code JIS[EIA] (2/) REMINDERS
SPECIFICATION. : MHz Ceramic Loop antenna WLAN/ Wi-Fi/ HDMI
SPECIFICATION Part No. : HLA.01 Product Name : 5150-5900 MHz Ceramic Loop antenna WLAN/ Wi-Fi/ HDMI Feature : 3.2mm *1.6mm * 0.5mm Low profile Peak gain 2.1dBi 65%+ Efficiency Typical Compact Size RoHS
RF Transformer Series
Version: July 23, 2018 Electronics Tech. RF Transformer Series Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang Ye
SMD Balun Transformers Series. Token Electronics Industry Co., Ltd. Version: June 29, Web:
Version: June 29, 2017 SMD Balun Transformers Series Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
Wire Wound Chip Inductor
Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications
Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for
YAGEO CORPORATION SMD INDUCTOR / BEADS
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design
YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type
MINIATURE LOW POWER SMD OSCILLATOR
MINIATURE LOW POWER SMD OSCILLATOR SERIES LPXO FEATURES + High reliability for low cost + Cheapest available SMD-LPXO + Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) + New standard for low
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
Balanced unbalanced transformation between antenna and cable (TV tuner) B W 21 S A01 T F. Structure Winding Type. Port Impedance.
Wire Wound Chip Balun Transformer BW-S Series Operating Temp. : -40 ~+85 FEATURES Winding type realizes small size and low profile Surface mount type Low insertion loss at frequency range Excellent solderability
DATASHEET 2012 / API Series AMOTECH
Document Datasheet Type Multilayer Chip Power Inductor Application High Power protection Part No. API series Revision 0 DATASHEET 2012 / 2520 API Series Applications DC-DC converter and PMIC for the mobile
Vectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
E M C C o m p o n e n t s MCZ-CH Series MCZ1210CH [0504 inch]*
![E M C C o m p o n e n t s MCZ-CH Series MCZ1210CH [0504 inch]*](/thumbs/82/85055329.jpg "E M C C o m p o n e n t s MCZ-CH Series MCZ1210CH [0504 inch]*")
E M C C o m p o n e n t s December 2015 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH Series MCZ1210CH [0504 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR
RF Components. Since 2003
RF Components Pulse offers a comprehensive line of RF magnetic components for use in CATV/ Hybrid Fiber Coax applications for set-top boxes and gateway devices, for TELCO TV in gateway devices, and FTTP
Inductors for Standard Circuits
Inductors for Standard Circuits Wound/STD magnetic shielded NLFV/NLFC series Type: NLFV25 NLFV2 NLFC4522 2520[8 inch]* 225[2 inch] 452[82 inch] * Dimensions Code JIS[EIA] Issue date: September 20 (/6)
VI TELEFILTER Filter specification TFS 915D 1/5
Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
Vectron International Filter specification TFS 737 1/5
Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
Wire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
Vectron International Filter specification TFS1255A 1/5
Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
MINIATURE LOW POWER SMD OSCILLATOR
MINIATURE LOW POWER SMD OSCILLATOR SERIES LPXO FEATURES + High reliability for low cost + Cheapest available SMD-LPXO + Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) + New standard for low
10 pf ~ 32 pf or Series Resonance. ±3 ppm per year max. -55 /+125 C OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
SMD QUARTZ CRYSTAL SERIES SMD0507 (2 pad housing 7.0x5.0mm) Please do not use this housing for new design. Please use SMD0507/4 housing FEATURES + Large frequency spectrum available + Do not use for new
Power Inductor SCD Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering SCD 321 T - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 321 3.3x3.x2.1 R47.47 K ±1% 43 4.5x4.x3.2 1R 1.
MULTILAYER CHIP INDUCTORS
CONTENTS PAGE GENERAL INFORMATION.............................................................. 243 HIGH FREQUENCY - L63H.......................................................... 245 HIGH FREQUENCY -
October Common Mode Filters. For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series. * Dimensions Code JIS[EIA]
![October Common Mode Filters. For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series. * Dimensions Code JIS[EIA]](/thumbs/89/98061837.jpg "October Common Mode Filters. For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s October 2014 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series MCZ1210CH MCZ2010CH [0504 inch]* [0804 inch] * Dimensions Code JIS[EIA]
Model BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/83/87790005.jpg "August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s August 2016 Multilayer Band Pass Filter For 2412-2484MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2412-2484MHz Conformity to RoHS Directive
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
Vectron International Temperatur sensor specification TFSS434B 1/6
Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics
SMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
Vectron International Filter specification TFS 400L 1/5
Vectron International Filter specification TFS 400L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 200 Ω Output: 200 Ω Characteristics Remark:
July Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]
![July Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]](/thumbs/95/124145640.jpg "July Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s July 203 Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series TCM0605G TCM0806G TCM608G [0202 inch]* [0302 inch] [0603 inch] * Dimensions
Vectron International Filter specification TFS 1575AA 1/5
Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
VI TELEFILTER Preliminary specification TFS 1575N 1/5
VI TELEFILTER Preliminary specification TFS 1575N 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
Cal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
B3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
VI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 2100 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum
Noise fi lter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC
Power Choke Coil for Automotive application Series: PCC-MM-LP(MC) PCC-MM-LP(MC) PCC-MM-LP(MC) PCC-MM-LP(MC) High heat resistance and high reliability Using metal composite core (MC) Industrial Property
Vectron International Filter specification TFS1590 1/5
Vectron International Filter specification TFS1590 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
VI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
Vectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
Vectron International Filter specification TFS455D 1/5
Vectron International Filter specification TFS455D 1/5 Measurement condition Ambient temperature To: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
Vectron International Filter specification TFS1575AG 1/5
Vectron International Filter specification TFS1575AG 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark:
Model PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
Surface Mount Wideband RF
Document 9- Surface Mount Wideband RF Tapped and untapped versions V interwinding isolation, / Watt RF input power ma max current rating. Typical Frequency Response Part db db db number (MHz) (MHz) (MHz)
Model PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
Vectron International Filter specification TFS 867A 1/5
Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
Multilayer Ferrite Chip Inductor
FEATURES Skywell multiplayer chip inductor is formed without a wound wire and has a closed magnetic circuit formed by simultaneous forming of alternative layers of ferrite paste and conductor paste. High
Vectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
Vectron International Filter specification TFS 400P 1/5
Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics
Dual Band Monopole Ceramic Chip Antenna
Features - Low profile - Compact size W x L x H (10 x 3.2 x 2 mm) - Low weight (240 mg) - Lead free materials - Fully SMD compatible - Lead free soldering compatible - Tape and reel packing - RoHS Compliant
ACM2012H-T05. Common Mode Filters. ACM-H Series. For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.
E M C C o m p o n e n t s May 2017 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) ACM-H Series ACM2012H-T05 [0805 inch]* * Dimensions Code JIS[EIA]
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1226 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 338 Ω -1.6 pf Output: 338 Ω -1.6 pf Characteristics
April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]
![April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]](/thumbs/89/98743824.jpg "April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s April 2014 Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series TCM0605G TCM1608G [0202 inch]* [0603 inch] * Dimensions Code JIS[EIA]
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
Kun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
Vectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
Vectron International Filter specification TFS 1227A 1/5
Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics
Kun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
Vectron International Filter specification TFS1220 1/5
Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics
Vectron International Filter specification TFS 868P 1/5
Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics
Model BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
VI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics
July Common Mode Filters. For power line. ACM series. * Dimensions Code JIS[EIA]
![July Common Mode Filters. For power line. ACM series. * Dimensions Code JIS[EIA]](/thumbs/77/75331134.jpg "July Common Mode Filters. For power line. ACM series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s July 0 Common Mode Filters For power line ACM series ACM50 ACM7060 ACM9070 ACM ACM5 [808 inch]* [8 inch] [68 inch] [8 inch] [605 inch] * Dimensions Code JIS[EIA] (/5) REMINDERS
Vectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
Vectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 2653 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 27,66 Ω -0,01 pf Output: 27,66 Ω -0,01 pf
TCM0403S Type. Common Mode Filters. TCM-S Series. For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.
E M C C o m p o n e n t s May 2016 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) TCM-S Series TCM0403S [0201 inch]* * Dimensions Code JIS[EIA]
VI TELEFILTER Filter specification TFS 130C 1/5
VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics
Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
VI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
Vectron International Filter specification TFS 522 1/5
Vectron International Filter specification TFS 522 1/5 Measurement condition Ambient temperature (T 0): 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
Kun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 2533 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: * Input: 27,22 Ω -,32 pf Output: 27,22 Ω -,32 pf Source:
SAW Bandpass Filter F4521
Features RF bandpass filter for CDMA0 CBand Tx. Part Usable bandwidth MHz (0 MHz ~ MHz) High attenuation No matching 0Ω singleended operation Ceramic Surface Mounted Device Package (.8 mm.8 mm ) RoHS compliant
Vectron International Filter specification TFS140AV 1/5
Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics
SMD SPXO 5.0x3.2mm VDC MHz
SMD SPXO 5.0x3.2mm 1.8-5.0 VDC MHz SERIES SXO FEATURES + High reliability for low cost + Low-priced SMD-clock-oscillator + Frequency stability from ±20 to ±100 ppm available + Supply voltage of 1.8, 2.5,
Automotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes
Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and higher current USB 3.0 and other high speed differential signal
VI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω