3D COIL 15x15 10mH ±5% 125 KHz SMD DROP RESISTANT TRANSPONDER 3D COIL 15.9x15.9 mm
|
|
- Bertram Simon
- 5 years ago
- Views:
Transcription
1 1/7 3D COIL 15x15 10mH ±5% 125 KHz SMD DROP RESISTANT TRANSPONDER 3D COIL 15.9x15.9 mm Made by: Sergio Cobos Checked by: S. Cobos Approved by: F. Bustos Date: 20/02/12 Date: 20/02/12 Date: 12/03/2012 Signature: Signature: Signature:
2 2/ DIMENSIONS Wx Wy Wz (*) Critical dimensions Pins coplanarity 0.15 mm
3 14,7 6,5 4,1 CUSTOMER CUSTOMER CODE 3/ SOLDERING RECOMMENDED REFLOW PROFILE max 360 sec ºC sec 30 sec ºC/ sec preheating sec cooling zone (sec) The reflow condition recommended above is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used RECOMMENDED PAD LAYOUT 13,3 6,7 1,3 0,7 All dimensions in mm
4 4/ MATERIALS FERRITE CORE MATERIAL Initial permeability µ i : 1000 ± 25 % (at 25 ºC, <10 khz, 0.1 mt) Tc 130ºC. Bs: 330mT (at 25ºC; 10 KHz, 250A/m) SMD BASE (LEADFRAME) Plastic material: LCP E4008. Tinned terminals: 0.2mm total thickness. Base material CuSn6 (Phosphor Bronze), 1-2 µm Ni 3-5 µm Sn100 (finish layer) ADHESIVE Adhesive used to join ferrite and SMD base: Epoxy adhesive Adhesive dispensing according to Full Glue Procedure (3DC1515FULLGLUE_A_5) WIRE For X and Y windings: Enamelled wire with modified Polyurethane, isolation Grade 1. Enamel temperature index according to IEC 60172: 192 ºC For Z winding: Selfbonding wire with modified Polyurethane as base coat, isolation Grade 1. Bond coat with Polyvinylbutyral. Norms IEC , Temperature index according to IEC 60172: 158 ºC Diameters range depending on the design: mm to 0.1 mm LABEL Material: acrylate
5 5/ PACKAGING TAPING SPECIFICATION (According to EIA481) Ao 16.2 Bo 17.3 Ko 4.2 N REEL 2± 0.5 PARTS PER REEL 330 mmф MIN 13± 0.5 MATERIAL LIST ITEM MATERIAL Reel SHOCK-PROOF POLYSTYROL Carrier tape PET 0.25 Cover tape TESA 4145 or similar 330± 2 min 24.4 max TAPING 170min 600pcs 170 min LEADER 400 mm
6 6/ ELECTRICAL CHARACTERISTICS OF THE PART X Winding Wire Φ Cu (mm) Number of turns in the khz, 1 Vac, 25 ºC typ L (mh) Q Rdc (Ω) SRF 1Vac, 25 ºC 10 ± 5% 21 ± 10% 140 ± 10% > 180 Sensitivity (mv rms /A rms 125 khz > 150 Y Winding Wire Φ Cu (mm) Number of turns in the khz, 1 Vac, 25 ºC typ L (mh) Q Rdc (Ω) SRF 1Vac, 25 ºC 10 ± 5% 21 ± 10% 145 ± 10% > 180 Sensitivity (mv rms /A rms 125 khz > 150 Z Winding Wire Φ Cu (mm) Number of turns in the khz, 1 Vac, 25 ºC typ L (mh) Q Rdc (Ω) SRF 1Vac, 25 ºC 10 ± 5% 23± 10% 250± 10% > 350 Sensitivity (mv rms /A rms 125 khz > Wx Wy Wz Inductance, Q factor, R dc and SRF measured with an LCR meter Wayne Kerr PMA 3260A Sensitivity measured with Helmholtz coils 5 turns, 166 mm Φ (contact GRUPO PREMO for measurement specifications)
7 7/ OPERATING FREQUENCY AND TEMPERATURE The operating frequency of the design is 125 khz. Operating temperature range: -40 ºC +85 ºC 6. - EDITION CONTROL Edition Date Change description Made by 1 st 27/03/09 Preliminary edition. Antonio Roldán 2 nd 27/11/09 Change Qz from 23±10% to 20.7 (minimal) Andrew 3 rd 05/05/11 Change the Rdc of Z from 250 ± 10% to 264 ± 10% and change the shape dimension from 15.5 max to 15.5 ± Andrew th 10/05/11 Update generic description in adhesive and label Sergio Cobos 5 th 24/10/11 Updated dimensions Sergio Cobos 6 th 20/02/12 Updated electric diagram. Updated adhesive and full glue procedure to assemble plastic base to ferrite core. Updated wire characteristics description. Sergio Cobos
Wire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationFERROXCUBE DATA SHEET. SMD common mode chokes EMI-suppression products. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET Supersedes data of September 2004 2008 Sep 01 SMD COMMON MODE CHOKES FOR EMI-SUPPRESSION General data ITEM Strip material Solderability Taping method SPECIFICATION copper (Cu), tin
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationSMT Inductors, SIMID Series SIMID 0603-C
SIMID 0603-C B82496-C Size 0603 (EIA) and/or 1608 (IEC) Rated inductance 1,0 to 220 nh Rated current 70 to 500 ma Construction Copper-plated ceramic core Laser-cut winding, epoxy-coated Features Extremely
More informationEMC Components. RF Chokes High Current B82432-H. Data Book Supplement
EMC Components RF Chokes High Current B82432-H Data Book Supplement SIMID 03 (Siemens Miniature Inductors) Rated inductance 1,0 bis 330 µh Rated current 0,11 to 1,10 A Construction Size as per EIA standard:
More informationSunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationTfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
More informationSMT Inductors SIMID 1812-T B82432-T. Data Sheet
SMT Inductors Data Sheet Size 1812 (EIA) or 4532 (IEC) Rated inductance 1,0 to 1000 µh Rated current 70 to 1300 ma Construction Upright ferrite drum core Laser-welded winding Flame-retardant encapsulation
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design
More informationTELEFILTER Filter Specification TFS 141 C 1/5
TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationDATASHEET CUSTOMER : 승인번호 ISSUE DATA SHEET. We have approved the attached specification. Written by Checked by Approved by
CUSTOMER : 승인번호 ISSUE DATA SHEET Product Name : Part No : Revision Date : 2012/11/23 Customer Code : We have approved the attached specification. Written by Checked by Approved by CUSTOMER Signature R
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationCMC 14 Common Mode Chokes Series
7 Electrical Data ID Code Inductance Value at C (-/+%) Less than % performance variations versus temperature (- C / + C) Minimum impedance attenuation : Ω from khz to MHz Compact SMD package (x pins) Applied
More informationPower Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
More informationVectron International Filter specification TFS1220 1/5
Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics
More informationVI TELEFILTER Preliminary specification TFS 1575N 1/5
VI TELEFILTER Preliminary specification TFS 1575N 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationVectron International Temperatur sensor specification TFSS434B 1/6
Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics
More informationICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
More informationVectron International Filter specification TFS1590 1/5
Vectron International Filter specification TFS1590 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
More informationVectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
More informationVectron International Filter specification TFS455D 1/5
Vectron International Filter specification TFS455D 1/5 Measurement condition Ambient temperature To: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
More informationSD3118 Low profile power inductors
SD38 Low profile power inductors Supersedes November 009 pplications Mobile/smart phones Tablets/e-readers Media players Digital cameras Small LED driver and LCD displays Handheld/mobile equipment Description
More informationDRQ. Dual winding, high power density, shielded drum core power inductors. Technical Data DS4311. Applications. Environmental data.
Supersedes pril 0 Dual winding, high power density, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels s a transformer: SEPIC,
More informationShielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
More informationVI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
More informationVectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS246R 1/5
Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics
More informationVectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
More informationAutomotive grade Dual winding, high power density shielded drum core power inductors
Supersedes September 07 Dual winding, high power density shielded drum core power inductors Product features AEC-Q00 qualified Dual winding inductors that can be used as a single inductor, SEPIC, Flyback,
More informationVI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
More informationVI TELEFILTER Filter specification TFS 915D 1/5
Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation
More informationVectron International Filter specification TFS 737 1/5
Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationVectron International Filter specification TFS 500 1/5
Vectron International Filter specification TFS 500 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 415 Ω -1 pf Output: 415 Ω -1 pf External
More informationVectron International Filter specification TFS1255A 1/5
Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationP7605 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7605 Family Features High Current (Saturation to 20A) Low DCR (to 9mΩ) Low profile (to
More informationVectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
More informationVectron International Filter specification TFS 868P 1/5
Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type
More informationVI TELEFILTER Filter specification TFS 230 1/5
VI TELEFILTER Filter specification TFS 230 1/5 Measurement Condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating impedances *: for input: 1,95 kω // -5,0 pf for output: 1,67 kω // -5,3
More informationVectron International Filter specification TFS 869K 1/5
Vectron International Filter specification TFS 869K 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS 1575AA 1/5
Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationMICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1575 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationVectron International Filter specification TFS 400L 1/5
Vectron International Filter specification TFS 400L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 200 Ω Output: 200 Ω Characteristics Remark:
More informationVI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 1227 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
More informationVI TELEFILTER Filter specification TFS 70Z 1/5
VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics
More informationVI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 2100 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum
More informationVectron International Filter specification TFS140AV 1/5
Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics
More informationVectron International Filter specification TFS180L 1/5
Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49
More informationVectron International Filter specification TFS1575AG 1/5
Vectron International Filter specification TFS1575AG 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark:
More informationITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :
ESTABLISHMENT 2006. 06. 16 APPROVED REVISION 2006. 12. 19 Series NO:IP061219001 APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : You can reapprove only the changed quality request recorded in spec
More informationShielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
More informationSpecifications For Approval
Spec No. TT3-ASSC00069 Customer Specifications For Approval Description : Coil Trade Name : UL File No. : E31156 Please return one copy with your approved signature DRAWN CHECKED QC CHECKEDAPPROVED RD
More informationKun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
More informationGSG-MA-0001 RJ45 1X2 Tab Up T/H, Slim, Sink 10G Base-T
To: Customer P/N: UDE P/N: Description: RJ45 1X2 Tab Up T/H, Slim, Sink 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Orange/Green 100% RoHS material,without exemption Approved Spec No. Update
More informationFERROXCUBE. RM10/I RM cores and accessories. Supersedes data of February Sep 01
FERROXCUBE DATA SHEET RM1/I Supersedes data of February 22 24 Sep 1 RM1/I CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1).462 mm 1 V e effective volume 431 mm 3
More informationDRQ Series Dual Winding, Shielded Inductors/Transformer
Description 5 C maximum total temperature operation Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformer applications (: turns ratio) Four sizes of shielded
More informationVectron International Filter specification TFS 867A 1/5
Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationCMS Common mode inductors, surface mount
Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use power supplies (PUPS)
More informationCal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
More informationLow Profile High Current Shielded Inductor TL2020SG11 (5.49x5.18x3.0mm)
ow Profile High Current Shielded Inductor TSG (.9x.x3.mm) FEATURES: APPICATIONS: owest height (3.mm) in this package footprint PDA/notebook/desktop/server applications Operating temperature range - C to
More informationVectron International Filter specification TFS 400P 1/5
Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1226 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 338 Ω -1.6 pf Output: 338 Ω -1.6 pf Characteristics
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationHCV1605 High current power inductors
Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to
More informationFP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
More informationVectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationSPECIFICATION FOR APPROVAL PAGE: 1
PAGE: 1 CONFIGURATION & DIMENSIONS A A : 2.5±0.2 B : 2.0±0.1 C : 1.8±0.1 B E : 1.4±0.1 Not Marking F : 0.40 C 0. 1.5 0.9 1.5 0.9 F F E PCB Pattern SCHEMATIC DIAGRAM d MATERIALS a Core Ferrite DR core b
More informationSPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000
Sunlord Specifications for Wire Wound SMD Power Inductor Page 1 of 11 SPECIFICATIONS Customer Product Name Sunlord Part Number Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number [ New
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
More informationVectron International Filter specification TFS 1227A 1/5
Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MNR - 4010-4R7 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCH - 5750C - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationIWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS
CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables
More information2.0 EMI INTERFERENCE SUPPRESSION AND EMC ELECTROMAGNETIC COMPATIBILITY
SMD Beads and Chokes Introduction 1 INTRODUCTION To support designers and manufacturers of electronic circuitry, FERROX- CUBE manufactures a comprehensive line of ferrite EMI-suppression products for use
More informationFERROXCUBE DATA SHEET. RM8/I RM, RM/I, RM/ILP cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET RM, RM/I, RM/ILP cores and accessories Supersedes data of September 24 28 Sep 1 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1).64 mm 1 V e
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics
More informationHP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;
More informationMAGNETIC PRODUCTS. SMD Beads and Chokes
MAGNETIC PRODUCTS SMD Beads and Chokes Philips Components Magnetic Products SMD beads in tape November 1994 2 Magnetic Products Philips Components Contents page SMD Beads 8 SMD Common Mode Chokes 14 SMD
More informationSPECIFICATION FOR APPROVAL
Ⅰ. Configuration and dimensions: REV. 20160715-P PAGE 1/8 Marking Inductance code A' C H F A A' C E F G H 3.20 ±0.4 2.90 ±0.2 2.50 ±0.2 2.20 ±0.2 ±0.2 +0.3 0.60-0.0 1.80 1.40 Ⅱ. Description: a. Ferrite
More informationVectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
More informationVectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
More informationCoiltronics DRQ Series Dual winding, shielded inductors/transformers
Technical Data Effective pril 0 Supersedes December 007 Coiltronics DRQ Series Dual winding, pplications s a transformer: SEPIC, flyback s an inductor: buck, boost, coupled inductor DC-DC Converters VRM
More informationWideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
More informationPLED Unidirectional Series (PLEDxUx)
(PLEDxUx) PLED Open LED Protectors Agency Approvals Agency Agency File Number E133083 Description The (PLEDxUx Series) open LED protectors provide an electronic switching shunt path around a single LED
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2653 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 27,66 Ω -0,01 pf Output: 27,66 Ω -0,01 pf
More informationRMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
More informationI-TECH INDUCTIVE TECHNOLOGIES, INC.
INDUCTIVE TECHNOLOGIES, INC. n Toroidal and Pot Core Inductors n Pot Core Flyback Transformers n Drum Core Power Inductors n Surface Mount Power Inductors n Current Sense Transformers n T1/CEPT/ISDN Primary
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
More informationVI TELEFILTER Filter specification TFS 130C 1/5
VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics
More informationHCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
More informationVectron International Filter specification TFS 522 1/5
Vectron International Filter specification TFS 522 1/5 Measurement condition Ambient temperature (T 0): 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More information