1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental
|
|
|
- Barrie Ford
- 5 years ago
- Views:
Transcription
1 with Knob TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Knob on all models for convenient fingertip adjustment Same design and housing sizes as GF063 series Precious metal, multi-contact wiper design Meets UL 94V-0 flammability requirements Sealed to withstand immersion cleaning processes Tape and ammo box available for PK, P1K and UK models Specifications Electrical Standard Resistance Range Ω to 5MΩ (standard 1, 2 & 5 sequence) Resistance Tolerance % and % End Resistance % or 1Ω, whichever is greater Resistance Taper Linear Peak Noise (C.R.V.) % or 1Ω, whichever is greater Power Rating watt at 70 C, 0 watt at 125 C Maximum Input Voltage VDC or power rating, whichever is smaller Temperature Coefficient ppm/ C Insulation Resistance..... MΩ minimum at VDC Dielectric Strength VAC, 1 minute Adjustment Travel Mechanical Mechanical Travel Shaft Torque gf cm (2.77 oz in) max. Stop Strength gf cm (6.93 oz in) min. Flammability of Plastic Materials Meets UL 94V-0 Nominal Weight g (PK, P1K, WK, UK) 0.64g (SK, S1K, XK, X1K, VK, V1K) Marking Resistance code, date code, model type All GF063-K models are available without knobs. Refer to GF063 Series on page 56. Environmental Temperature Range C to 125 C Low Temperature Operation C, 0.5 watt, 2 hours T/R ) 2%, S.S. ) 2% High Temperature Exposure C, 2 hours T/R ) 2%, S.S. ) 2% Load Life C, 0.5 watt, hours T/R ) 3%, S.S. ) 2% Thermal Shock C, 125 C, 30 minutes each, 5 cycles T/R ) 1%, S.S. ) 1% Shock G, 6ms, 6 directions, 3 times each T/R ) 1%, S.S. ) 1% Vibration Hz, 1.5mm amplitude, G, 12 hours T/R ) 1%, S.S. ) 1% Humidity C, 90-95%RH, 0.5 watt, hours T/R ) 3%, S.S. ) 2% Moisture Resistance C to 65 C, 80-98%RH, 0.5 watt, cycles, 240 hours T/R ) 2% Soldering Heat Resistance C, 3 seconds T/R ) 1% Seal Test C, hot water for 1 minute Rotational Life cycles without discontinuity T/R ) (2Ω 3%) T/R = Total Resistance Change; S.S. = Setting Stability (voltage ratio) 68
2 Dimensions GF063PK P Terminal Style, Top Adjust Knob GF063P1K P1 Terminal Style, Top Adjust Knob GF063WK W Terminal Style, Top Adjust Knob GF063UK U Terminal Style, Top Adjust Knob
3 Dimensions GF063SK S Terminal Style, Side Adjust Knob GF063S1K S1 Terminal Style, Side Adjust Knob GF063XK X Terminal Style, Side Adjust Knob GF063X1K X1 Terminal Style, Side Adjust Knob
4 Dimensions GF063VK V Terminal Style, Side Adjust Knob GF063V1K V1 Terminal Style, Side Adjust Knob Knob Dimensions All GF063-K Models Ø Adjustment cross-slot depth Electrical Schematic clockwise ccw cw wiper 71
5 Specifications Tape Dimensions Conforms to EIA-468 Specifications PKT2, P1KT2 1.3 Max. 1.3 Max PKT2 P1KT , Max , 0.5 Ø UKT Max. 1.3 Max , Max , 0.5 Ø Ammo Box Dimensions Conforms to EIA-468-B and JIS-C-0805 PKT2, P1KT2, UKT2 First Terminal is 32 3 Pieces Per Box mm minimum leader at both ends First Terminal is
6 Part Numbering System GF063 P1 K T2 B 2 K Resistance Tolerance: K = %; M = % Resistance Code: Expressed in ohms. A three digit code where the first two digits are significant figures, and the third digit indicates the number of zeros that follow these figures (i.e., = Ω; 1 = Ω; 2 = Ω; 5 =,000Ω). Resistance Taper: B = Linear. Packaging: T2 = Tape and Ammo Box, PK, P1K and UK Top Adjust Models. Adjustment Knob: K = Knob. Terminal Style: P, P1, W, U = 3-Lead Configurations, Top Adjust. S, S1, X, X1, V, V1 = 3-Lead Configurations, Side Adjust. TOCOS Series Name. Part Numbers Nominal Resistance Resistance Tolerance % Resistance Tolerance % Value (Ω) Code Potentiometer Styles GF063PK Through-Hole, P Terminal Style, Top Adjust Knob,000,000,000,000,000,000, GF063PKT2 B K GF063PKT2 B K GF063PKT2 B K GF063PKT2 B 1 K GF063PKT2 B 1 K GF063PKT2 B K GF063PKT2 B 2 K GF063PKT2 B 2 K GF063PKT2 B K GF063PKT2 B 3 K GF063PKT2 B 3 K GF063PKT2 B K GF063PKT2 B 4 K GF063PKT2 B 4 K GF063PKT2 B K GF063PKT2 B 5 K GF063PKT2 B 5 K GF063PKT2 B K GF063PK B K GF063PK B K GF063PK B K GF063PK B 1 K GF063PK B 1 K GF063PK B K GF063PK B 2 K GF063PK B 2 K GF063PK B K GF063PK B 3 K GF063PK B 3 K GF063PK B K GF063PK B 4 K GF063PK B 4 K GF063PK B K GF063PK B 5 K GF063PK B 5 K GF063PK B K GF063PKT2 B M GF063PKT2 B M GF063PKT2 B M GF063PKT2 B 1 M GF063PKT2 B 1 M GF063PKT2 B M GF063PKT2 B 2 M GF063PKT2 B 2 M GF063PKT2 B M GF063PKT2 B 3 M GF063PKT2 B 3 M GF063PKT2 B M GF063PKT2 B 4 M GF063PKT2 B 4 M GF063PKT2 B M GF063PKT2 B 5 M GF063PKT2 B 5 M GF063PKT2 B M GF063PK B M GF063PK B M GF063PK B M GF063PK B 1 M GF063PK B 1 M GF063PK B M GF063PK B 2 M GF063PK B 2 M GF063PK B M GF063PK B 3 M GF063PK B 3 M GF063PK B M GF063PK B 4 M GF063PK B 4 M GF063PK B M GF063PK B 5 M GF063PK B 5 M GF063PK B M GF063PK GF063P1K Through-Hole, P1 Terminal Style, Top Adjust Knob,000,000,000,000,000,000, GF063P1KT2 B K GF063P1KT2 B K GF063P1KT2 B K GF063P1KT2 B 1 K GF063P1KT2 B 1 K GF063P1KT2 B K GF063P1KT2 B 2 K GF063P1KT2 B 2 K GF063P1KT2 B K GF063P1KT2 B 3 K GF063P1KT2 B 3 K GF063P1KT2 B K GF063P1KT2 B 4 K GF063P1KT2 B 4 K GF063P1KT2 B K GF063P1KT2 B 5 K GF063P1KT2 B 5 K GF063P1KT2 B K GF063P1K B K GF063P1K B K GF063P1K B K GF063P1K B 1 K GF063P1K B 1 K GF063P1K B K GF063P1K B 2 K GF063P1K B 2 K GF063P1K B K GF063P1K B 3 K GF063P1K B 3 K GF063P1K B K GF063P1K B 4 K GF063P1K B 4 K GF063P1K B K GF063P1K B 5 K GF063P1K B 5 K GF063P1K B K GF063P1KT2 B M GF063P1KT2 B M GF063P1KT2 B M GF063P1KT2 B 1 M GF063P1KT2 B 1 M GF063P1KT2 B M GF063P1KT2 B 2 M GF063P1KT2 B 2 M GF063P1KT2 B M GF063P1KT2 B 3 M GF063P1KT2 B 3 M GF063P1KT2 B M GF063P1KT2 B 4 M GF063P1KT2 B 4 M GF063P1KT2 B M GF063P1KT2 B 5 M GF063P1KT2 B 5 M GF063P1KT2 B M GF063P1K B M GF063P1K B M GF063P1K B M GF063P1K B 1 M GF063P1K B 1 M GF063P1K B M GF063P1K B 2 M GF063P1K B 2 M GF063P1K B M GF063P1K B 3 M GF063P1K B 3 M GF063P1K B M GF063P1K B 4 M GF063P1K B 4 M GF063P1K B M GF063P1K B 5 M GF063P1K B 5 M GF063P1K B M GF063P1K 73
7 Part Numbers Nominal Resistance Resistance Tolerance % Resistance Tolerance % Value (Ω) Code Potentiometer Styles GF063WK Through-Hole, W Terminal Style, Top Adjust Knob,000,000,000,000,000,000, GF063WK B K GF063WK B K GF063WK B K GF063WK B 1 K GF063WK B 1 K GF063WK B K GF063WK B 2 K GF063WK B 2 K GF063WK B K GF063WK B 3 K GF063WK B 3 K GF063WK B K GF063WK B 4 K GF063WK B 4 K GF063WK B K GF063WK B 5 K GF063WK B 5 K GF063WK B K GF063WK B M GF063WK B M GF063WK B M GF063WK B 1 M GF063WK B 1 M GF063WK B M GF063WK B 2 M GF063WK B 2 M GF063WK B M GF063WK B 3 M GF063WK B 3 M GF063WK B M GF063WK B 4 M GF063WK B 4 M GF063WK B M GF063WK B 5 M GF063WK B 5 M GF063WK B M GF063WK GF063UK Through-Hole, U Terminal Style, Top Adjust Knob,000,000,000,000,000,000, GF063UKT2 B K GF063UKT2 B K GF063UKT2 B K GF063UKT2 B 1 K GF063UKT2 B 1 K GF063UKT2 B K GF063UKT2 B 2 K GF063UKT2 B 2 K GF063UKT2 B K GF063UKT2 B 3 K GF063UKT2 B 3 K GF063UKT2 B K GF063UKT2 B 4 K GF063UKT2 B 4 K GF063UKT2 B K GF063UKT2 B 5 K GF063UKT2 B 5 K GF063UKT2 B K GF063UK B K GF063UK B K GF063UK B K GF063UK B 1 K GF063UK B 1 K GF063UK B K GF063UK B 2 K GF063UK B 2 K GF063UK B K GF063UK B 3 K GF063UK B 3 K GF063UK B K GF063UK B 4 K GF063UK B 4 K GF063UK B K GF063UK B 5 K GF063UK B 5 K GF063UK B K GF063UKT2 B M GF063UKT2 B M GF063UKT2 B M GF063UKT2 B 1 M GF063UKT2 B 1 M GF063UKT2 B M GF063UKT2 B 2 M GF063UKT2 B 2 M GF063UKT2 B M GF063UKT2 B 3 M GF063UKT2 B 3 M GF063UKT2 B M GF063UKT2 B 4 M GF063UKT2 B 4 M GF063UKT2 B M GF063UKT2 B 5 M GF063UKT2 B 5 M GF063UKT2 B M GF063UK B M GF063UK B M GF063UK B M GF063UK B 1 M GF063UK B 1 M GF063UK B M GF063UK B 2 M GF063UK B 2 M GF063UK B M GF063UK B 3 M GF063UK B 3 M GF063UK B M GF063UK B 4 M GF063UK B 4 M GF063UK B M GF063UK B 5 M GF063UK B 5 M GF063UK B M GF063UK GF063SK Through-Hole, S Terminal Style, Side Adjust Knob,000,000,000,000,000,000, GF063SK B K GF063SK B K GF063SK B K GF063SK B 1 K GF063SK B 1 K GF063SK B K GF063SK B 2 K GF063SK B 2 K GF063SK B K GF063SK B 3 K GF063SK B 3 K GF063SK B K GF063SK B 4 K GF063SK B 4 K GF063SK B K GF063SK B 5 K GF063SK B 5 K GF063SK B K GF063SK B M GF063SK B M GF063SK B M GF063SK B 1 M GF063SK B 1 M GF063SK B M GF063SK B 2 M GF063SK B 2 M GF063SK B M GF063SK B 3 M GF063SK B 3 M GF063SK B M GF063SK B 4 M GF063SK B 4 M GF063SK B M GF063SK B 5 M GF063SK B 5 M GF063SK B M GF063SK 74
8 Part Numbers Nominal Resistance Resistance Tolerance % Resistance Tolerance % Value (Ω) Code Potentiometer Styles GF063S1K Through-Hole, S1 Terminal Style, Side Adjust Knob,000,000,000,000,000,000, GF063S1K B K GF063S1K B K GF063S1K B K GF063S1K B 1 K GF063S1K B 1 K GF063S1K B K GF063S1K B 2 K GF063S1K B 2 K GF063S1K B K GF063S1K B 3 K GF063S1K B 3 K GF063S1K B K GF063S1K B 4 K GF063S1K B 4 K GF063S1K B K GF063S1K B 5 K GF063S1K B 5 K GF063S1K B K GF063S1K B M GF063S1K B M GF063S1K B M GF063S1K B 1 M GF063S1K B 1 M GF063S1K B M GF063S1K B 2 M GF063S1K B 2 M GF063S1K B M GF063S1K B 3 M GF063S1K B 3 M GF063S1K B M GF063S1K B 4 M GF063S1K B 4 M GF063S1K B M GF063S1K B 5 M GF063S1K B 5 M GF063S1K B M GF063S1K GF063XK Through-Hole, X Terminal Style, Side Adjust Knob,000,000,000,000,000,000, GF063XK B K GF063XK B K GF063XK B K GF063XK B 1 K GF063XK B 1 K GF063XK B K GF063XK B 2 K GF063XK B 2 K GF063XK B K GF063XK B 3 K GF063XK B 3 K GF063XK B K GF063XK B 4 K GF063XK B 4 K GF063XK B K GF063XK B 5 K GF063XK B 5 K GF063XK B K GF063XK B M GF063XK B M GF063XK B M GF063XK B 1 M GF063XK B 1 M GF063XK B M GF063XK B 2 M GF063XK B 2 M GF063XK B M GF063XK B 3 M GF063XK B 3 M GF063XK B M GF063XK B 4 M GF063XK B 4 M GF063XK B M GF063XK B 5 M GF063XK B 5 M GF063XK B M GF063XK GF063X1K Through-Hole, X1 Terminal Style, Side Adjust Knob,000,000,000,000,000,000, GF063X1K B K GF063X1K B K GF063X1K B K GF063X1K B 1 K GF063X1K B 1 K GF063X1K B K GF063X1K B 2 K GF063X1K B 2 K GF063X1K B K GF063X1K B 3 K GF063X1K B 3 K GF063X1K B K GF063X1K B 4 K GF063X1K B 4 K GF063X1K B K GF063X1K B 5 K GF063X1K B 5 K GF063X1K B K GF063X1K B M GF063X1K B M GF063X1K B M GF063X1K B 1 M GF063X1K B 1 M GF063X1K B M GF063X1K B 2 M GF063X1K B 2 M GF063X1K B M GF063X1K B 3 M GF063X1K B 3 M GF063X1K B M GF063X1K B 4 M GF063X1K B 4 M GF063X1K B M GF063X1K B 5 M GF063X1K B 5 M GF063X1K B M GF063X1K 75
9 Part Numbers Nominal Resistance Resistance Tolerance % Resistance Tolerance % Value (Ω) Code Potentiometer Styles GF063VK Through-Hole, V Terminal Style, Side Adjust Knob,000,000,000,000,000,000, GF063VK B K GF063VK B K GF063VK B K GF063VK B 1 K GF063VK B 1 K GF063VK B K GF063VK B 2 K GF063VK B 2 K GF063VK B K GF063VK B 3 K GF063VK B 3 K GF063VK B K GF063VK B 4 K GF063VK B 4 K GF063VK B K GF063VK B 5 K GF063VK B 5 K GF063VK B K GF063VK B M GF063VK B M GF063VK B M GF063VK B 1 M GF063VK B 1 M GF063VK B M GF063VK B 2 M GF063VK B 2 M GF063VK B M GF063VK B 3 M GF063VK B 3 M GF063VK B M GF063VK B 4 M GF063VK B 4 M GF063VK B M GF063VK B 5 M GF063VK B 5 M GF063VK B M GF063VK GF063V1K Through-Hole, V1 Terminal Style, Side Adjust Knob,000,000,000,000,000,000, GF063V1K B K GF063V1K B K GF063V1K B K GF063V1K B 1 K GF063V1K B 1 K GF063V1K B K GF063V1K B 2 K GF063V1K B 2 K GF063V1K B K GF063V1K B 3 K GF063V1K B 3 K GF063V1K B K GF063V1K B 4 K GF063V1K B 4 K GF063V1K B K GF063V1K B 5 K GF063V1K B 5 K GF063V1K B K GF063V1K B M GF063V1K B M GF063V1K B M GF063V1K B 1 M GF063V1K B 1 M GF063V1K B M GF063V1K B 2 M GF063V1K B 2 M GF063V1K B M GF063V1K B 3 M GF063V1K B 3 M GF063V1K B M GF063V1K B 4 M GF063V1K B 4 M GF063V1K B M GF063V1K B 5 M GF063V1K B 5 M GF063V1K B M GF063V1K Packaging Standard: Tape & Ammo Packaging Packaging PKT2, P1KT2 & UT2 All GF063-K Models pieces per ammo box. pieces per vinyl bag. pieces per box. Soldering and Cleaning Guidelines For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers. 76
4mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
Effective Date April 5 TOCOS POTENTIOMETERS 4mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 4mm square SMD, single-turn, sealed cermet
SINGLE TURN COPAL ELECTRONICS S T T A Ω ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES Lead-free soldering, Cadmium-free Top and side adjustment styles Rotor with a cross slot for ease of adjustment Leaded terminals provide strong as adhesive
Fully Sealed Container Cermet Potentiometers Military and Professional Grade
PE0 Fully Sealed Container Cermet Potentiometers FEATURES Watt at 70 C High power rating Low temperature coefficient Excellent stability Full sealing Low contact resistance variation Mechanical strength
Model 97 & 99-5/8 Square Single-Turn Panel Control with Rotary Switch
*RoHS COMPLIANT Features Virtually infinite electrical circuit isolation Metal or plastic shaft options DPST and DPDT switch options RoHS compliant* Model 97 & 99-5/8 Square Single-Turn Panel Control with
SERIES WW24 Industrial Wirewound Rotary Potentiometer 24mm Diameter / 5 Watts
SERIES WW4 Industrial wound Rotary Potentiometer 4mm Diameter / 5 Watts For more information about this product, visit our website at: www.potentiometers.com 5 watt @ 5 C / 4 watt @ 55 C power rating Dust-proof
Fully Sealed Container Cermet Potentiometers Submarine Applications
Fully Sealed Container Cermet Potentiometers Submarine Applications FEATURES High power rating 1.5 W at 70 C Stainless steel shaft and bushing to endure sea salt water immersion Fully sealed IP68 on panel
Fully Sealed Container 12 mm Square or Round Single-Turn Cermet Trimmer
Fully Sealed Container 12 mm Square or Round Single-Turn Cermet Trimmer The trimming potentiometers T12 and T13 fully meet the requirements of CECC 41 100. The use of a cermet track combined with sealing
Resistance WIREWOUND. Wiper Travel. STANDARD RESISTANCE VALUES (in Ω) (1) 20, 50, 100, 200, 500, 1K, 2K, 5K
Bulk Metal Foil Technology Ultra High Precision Trimming Potentiometers, QPL Approved 1 / 4 " Square, Qualified to MIL-PRF-22097, Char. F, RJ26 with a Smooth and Unidirectional Output INTRODUCTION Vishay
Knob Potentiometer FEATURES. 12 wrench CIRCUIT DIAGRAM (1) (3) (2)
FEATURES 1 Watt at 40 C Test according to CECC 41300 - version for professional and industrial applications PA16 - version for professional audio applications Compact (integrated) Minimum clearance required
Fully Sealed Container Cermet Potentiometer Professional Grade
Fully Sealed Container Cermet Potentiometer Professional Grade T Q O QUICK REFERENCE DATA Multiple module Switch module Detent module Special electrical laws No n/a n/a A: linear, L: logarithmic, F: reverse
MIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
Bulk Metal Foil Technology Ultra High Precision Trimming Potentiometers, / 4 " Square, RJ26 Style, Designed to Meet or Exceed The Requirements of MIL-PRF-905, Char. H with a Smooth and Unidirectional Output
Resistance WIREWOUND. Wiper Travel. STANDARD RESISTANCE VALUES (in Ω) (1) 20, 50, 100, 200, 500, 1K, 2K, 5K
Bulk Metal Foil Technology Ultra High Precision Trimming Potentiometers, QPL Approved / 4 " Square, Qualified to MIL-PRF-22097, Char. F, RJ26 with a Smooth and Unidirectional Output INTRODUCTION Vishay
Leaded Surface Mount Series 767 Technical Data
Leaded Surface Mount Series 767 Technical Data Features Medium Body Design Solid Ceramic Construction No Internal Dendrite Growth Requires 30% Less Board Space Than Molded Products of the Same Power Rating
Chip Resistors / Chip Arrays
Chip Resistors / Chip Arrays w w w. b o u r n s. c o m I. CR Series Chip Resistors...92 II. CAT/CAY Series Chip Resistor Arrays...96 CAT/CAY 16 Series...96 CAY1 Chip Resistor Array...97 CAY17 Bussed Resistor
Knob Potentiometer with Switch
Knob Potentiometer with Switch, The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting
PTS Series High Grade Slide Potentiometer
*RoHS COMPLIANT Features High grade, long life Single and dual gang Assortment of resistance tapers Tracking error within ±3 db 45, 60 and 100 mm sizes Wide operating temperature range T-bar lever option
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer
Fully Sealed Container Cermet Potentiometers Submarine Applications
FEATURES High power rating W at 70 C Stainless steel shaft and bushing to endure sea salt water immersion Fully sealed IP68 on panel Tight temperature coefficient (± 75 ppm/ C typical) Compliant to RoHS
3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer
3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer 43 FEATURES W at 70 C Wide ohmic value range (10 Ω to 5 MΩ) Panel mount available Multi-finger wiper for better C.R.V. Tests according to CECC 41000 or
Type CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
27mm Size Metal Shaft Potentiometer
7mm Size Metal Potentiometer RK7 Series High-grade potentiometer featuring good control feel and superior features. Rotary Slide Trimmer Multi Control Devices Position Sensors Metal Insulated Knob Operating
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. *RoHS COMPLIANT VERSIONS AVAILABLE Features Lead free version available (see
12.5 mm Modular Panel Potentiometer High Dielectric Strength
12.5 mm Modular Panel Potentiometer High Dielectric Strength QUICK REFERENCE DATA Multiple module Up to 7 modules Switch module Yes Detent module Yes Special electrical laws A: linear, L: logarithmic,
Thin Film Ultra Precision Resistors
Type RU73 Series Key Features High precision - TCR 2ppm/ C and 3ppm/ C Tolerance down to 0.01% Thin film (nichrome) Available in standard and high power versions Terminal finish electroplated 100% matte
Data Sheet. Chun Ann J.C Liu. Customer: Thin Film Precision Chip Resistor - AR Series. Checked. Product :
Data Sheet Customer: Product : Thin Film Precision Chip Resistor - AR Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 19-Aug-10 Edition : REV.C6 Produced by Checked Approved by Prepared
Long Life Cermet Potentiometer 2 Million Cycles
Long Life Cermet Potentiometer 2 Million Cycles FEATURES 2 million cycles Cermet element 12.5 mm square single turn panel control 4, 6 and 6.35 shaft diameters and 29 terminal styles Multiple assemblies
Type RN73 Series. Thin Film Precision Resistors. Electrical Characteristics. Key Features. Applications
Type RN73 Series Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Terminal finish electroplated 100% matte Sn Applications Communications Industrial Controls
Classification Contact form Contact type Contact material Enclosure Rating Model Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2
Miniature Relay for Signal Circuits ROHS compliant. Wide switching power of 10 µa to 2 A. High dielectric strength coil-contacts:1,000 VAC; open contacts: 750 VAC. Conforms to FCC Part 68 requirements.
HVR. Lead Wire Length (H, mm)
High Resistor Features Special conductive film withstands high voltage d L H D working voltage far over that of generalpurpose resistors Suitable for applications such as TV s, high voltage power supply,
Fully Sealed Potentiometer Professional Grade
Fully Sealed Potentiometer Professional Grade PE0 QUICK REFERENCE DATA Multiple module No Switch module n/a Detent module Yes Special electrical laws A: linear, L:, F: reverse Sealing level IP 67 Lifespan
Selection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/ C):
Thin Film Precision Resistors 1206 1210 Rated Power @ 70 C: 0.125W 0.2W Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0 Max: 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5
Thin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
C9209 PRESENTATION. DIMENSIONS (in mm) SINGLE ELEMENT ROTARY - SIZE 09 PRECISION POTENTIOMETER
C909 SINGLE ELEMENT ROTARY - SIZE 09 PRECISION POTENTIOMETER PRESENTATION Conductive Polymer The C909 plastic potentiometer is manufactured and tested according to NF C 9355 and MIL R 3903 standards. The
50W TO220 High Power Resistors
50W TO220 High Power Resistors MHP 50 Non-inductive, thin film technology. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 2.3 C/W resistor hot spot to metal
LR Series. Construction. Application. Features
Metal Alloy Low-Resistance Resistor LR Series Construction Application Power supply Battery pack DIY tools Inverter/Converter (AC/DC, DC/DC, DC/AC) Measurable instrument Consumer electronics Note book
Data Sheet for Precision Potentiometer
Electrical Data 3turn 5turn 1turn Effective electrical angle of rotation 1.) 18 ±5 18 ±5 36 ±5 Total resistance 1.) 2 Ohm..5 kohm 2 Ohm..1 kohm Resistance tolerance ±3% (±1%) Independent linearity (best
S-1000A/2000A ROTARY CODED SWITCHES S A W FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
ROTARY ODED SWITHES S-A/A RoHS compliant INTERNAL STRUTURE S-A / A series FEATURES Part name Housing ontact Terminal pin Base O ring Material Polybutyleneterephthalate opper alloy, Gold-plated Polybutyleneterephthalate
Tactile Switch. Ordering Information. A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical, and High-force.
Tactile Switch A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical, and High-force. A positive click action plus a long life equal to that of a no-contact switch. Radial models (taping specifications)
Carbon Composition Resistor
Rating and Dimensions Dimensions : Millimetres Power Dimensions L D Lead d Maximum Rated Maximum Overload Dielectric Withstand Tolerance ±(%) R-Value 1/4 W 6.4 ±0.7 2.3 ±0.2 0.6 250 400 500 5 E-24 1/2
SRM VDE. REG.-Nr. E932. Cap Diameter (D1, mm) Body Diameter (D2, mm)
D2 VDE REG.-Nr. E932 Specifications Per IEC 605- Features B L D IEC60065 & UL676 Compliant MELF packaging yet capable of high power handling Special conductive film enhances anti-surge capability. Absorbs
YAGEO CORPORATION SMD RESISTORS. RC Series FEATURES. Extremely Thin and Light. Highly Reliable Multilayer Electrode Construction
YAGEO CORPORATION SMD RESISTORS Thick Film Chip Resistors RC Series FEATURES Extremely Thin and Light Highly Reliable Multilayer Electrode Construction Compatible with all Soldering Process Highly Stable
6mm. potentiometer SMD PS-6 & PSX-6 MAIN FEATURES MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS HOW TO ORDER.
6mm potentiometer SMD MECHNICL SPECIFICTIONS Stop torque: > Ncm. ( >7 in-oz) PS-6 & PSX-6 MIN FETURES Specifically designed for leadfree reflow soldering processes (excellent performance). Carbon resistive
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N
![TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N](/thumbs/84/91187989.jpg "TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N")
TEL:-3349 FAX:-332E-MAIL: szss@3.com FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FBR2 SERIES FEATURES (FOR SIGNAL APPLICATIONS)
Tactile Switch. Ordering Information. A Wide Range of Models: 6 6 mm, mm, Side-operated, High-force, and Gold-plated.
Tactile Switch BF A Wide Range of Models: mm, mm, Side-operated, High-force, and Gold-plated. Extended mechanical/electrical durability: 0 x 0 operations for x mm type and x 0 operations for the x mm type
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY K-RELAYS.0 a UL File No.: E3 CSA File No.: LR2550.0.8 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical
CA9 CE9. Carbon Potentiometers CA. Cermet Potentiometers CE
arbon Potentiometers E ermet Potentiometers E www.acptechnologies.com Specifications on this catalog are for reference only, as they are subject to change without notice. E RON ERMET E mm carbon potentiometers
Ultraminiature Photoelectric Switches with Self-contained Amplifier
Ultraminiature Photoelectric Switches with Self-contained Amplifier HPJ Series Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8 mm (thru scan model) 30 x
CMS SLIDE SWITCHES (SMD) COPAL ELECTRONICS CMS T B FEATURES PART NUMBER DESIGNATION. RoHS compliant INTERNAL STRUCTURE.
OPAL ELETRONIS SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE 7 FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact mechanism Load life of, cycles ompatible with automatic
POTENTIOMETERS OUTLINE
OUTLINE OPERATING PRINCIPLES CONTACT METHOD TYPE E Resistor EiTerminal Displacement E0 Output voltage Wiper Effective electrical angle (Length): f Displacement (Length, Angle): Input voltage: Ei Output
Precision Thin Film Precision Resistors
Key Features Thin film precision resistors with TC's of 15ppm, 25ppm and 50ppm and tolerances to 0.1%. Applications in measurement, telemetry and for sensing circuits. Case sizes 0402, 0603, 0805, 1206,
Knob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x
Knob Potentiometer P6, PA6 DESIGN SUPPORT TOOLS click logo to get started FEATURES Test according to CECC 4000 or IEC 60393- P6 - version for professional and industrial applications (cermet) W at 40 C
9 mm Multi-Ganged Potentiometer
Vishay Sfernice 9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (Extra miniature module size) Multiple assemblies (up to seven ) Shaft and panel sealed option Center mechanical
Low Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
PART NUMBER: ACTR MHz-DCC6C-75kHz-v1.1 Frequency: MHz
PART NUMBER: ACTR3028-315MHz-DCC6C-75kHz-v1.1 Frequency: 315.000MHz Features 1-port Resonator Provides reliable, fundamental mode, quartz Frequency stabilization i.e. in transmitters or local oscillators
FBR211 SERIES 1 POLE MINIATURE RELAY. 1 to 2 A (FOR SIGNAL SWITCHING) 1 to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS)
MINIATURE RELAY POLE FBR2 SERIES to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS) 2 A maximum carrying current Capable of 2 A maximum continuous carrying
A S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
Fully Sealed Potentiometer Military and Professional Grade
PE0 Fully Sealed Potentiometer Military and Professional Grade DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02") FEATURES High power rating W at 70 C Low temperature coefficient (150 ppm/ C typical)
Surface-mounting Relay
Surface-mounting Relay Extremely Thin SPST-NO Flat Relay, One of the Thinnest Relays in the World Dimensions of 7.(W).6(L) 4.2 mm(h) (SMD) or 3.8 mm(h) (TH) represent a reduction of approximately 2% in
SMD High Power Precision Resistors. Type RP73 Series
Type RP73 Series Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating Terminal finish electroplated 100% matte Sn Applications Communications
UNIQUELY DESIGNED RELAY FEATURES
UL CSA VDE Pending Pending Pending UNIQUELY DESIGNED RELAY K-RELAYS a.8 FEATURES 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical ( A V): more
SA-7000 ROTARY CODED SWITCHES (SMD) S A T A FEATURES PART NUMBER DESIGNATION COPAL ELECTRONICS. RoHS compliant. 1 Marking cover 2 3 4
OPL ELETRONIS ROTRY ODED SWITHES (SMD) S- RoHS compliant INTERNL STRUTURE Part name Material Flammability FETURES RoHS compliant Low profile of. mm Wide variety (top or side setting, or positions, J-hook,
Trimmer Potentiometers
PV6.pdf /9/7 Trimmer Potentiometers Lead Sealed Type Multiturn PV6 Series COMMON DIMENSIONS PV6 Series 6.40 ±. (.5 ±.05).8 MIN. (.05) 0.0 (.95).5 (.060).7 ± 0. (.050 ±.004) 4.8 ±. (.90 ±.005) 9.5 (.75)
CS14. Carbon Endless Sensor. Specifications on this catalog are for reference only, as they are subject to change without notice.
Carbon Endless Sensor 5 www.acptechnologies.com Specifications on this catalog are for reference only, as they are subject to change without notice. mm rotary position sensor with 30º mechanical rotation
Classification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard. SPST-NO (1a) Fully sealed PCB terminal
SPST Slim Power Relay for A switching Slim -mm width and miniature size. (20.08 12. mm) High switching capability A (20 VAC and VDC), and high contact reliability by crossbar-twin contact. Low power consumption
Select G3PA SSRs and G32A Cartridges to be Discontinued; Replace with G3PA-X or G3PJ Relays, G32A-A-X Cartridges
NO: RL-159 PRODUCT: G3PA SSRs, G32A Cartridges DATE: January 2017 TYPE: Partial Discontinuation Notice Select G3PA SSRs and G32A Cartridges to be Discontinued; Replace with G3PA-X or G3PJ Relays, G32A-A-X
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. POWER RELAY 1 POLE 3,, 1 A FBR16 SERIES FEATURES Compact with high power (3
DISCONTINUED (2002) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES FEATURES Super miniature size: 0.2 inch 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom
ACTR Features: ACTR DCC6C v1.1
Features: ACTR9028-934.6-DCC6C v1.1 1-port Resonator Provides reliable, fundamental mode, quartz frequency stabilization i.e. in transmitters or local oscillators Surface Mounted Technology (SMT) Lead-free
SMD High Power Precision Resistors. Type RP73 Series
Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating Terminal finish electroplated 100% matte Sn Applications Communications Industrial
Thin Film Precision Chip Resistor (AR Series)
Features Advanced thin film technology Very tight tolerance down to ±0.01% Extremely low down to ±5PPM/C Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available Thin Film Precision Chip Resistor
Remote controllable and available in a wide variety of products. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage
RK168 Motor-driven Remote controllable and available in a wide variety of products Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage 50V AC Total rotational angle 0 ±5
FrelTec GmbH. Thin Film Chip Resistor SMD Precision (1% to 0,1%) Low TCR (10, 15, 25 and 50 ppm)
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thin Film Chip Resistor SMD Precision (1% to 0,1%) Low TCR (10, 15, 25 and 50 ppm) 8/31/2011 1/15 Freltec GmbH www.freltec.com SPECIFICATION Part Number 030
EN GWT compliant Low profile: 15.7mm.618inch height 1a/1c 16A power relay
EN6033-1 GWT compliant Low profile: 1.7mm inch height 1a/1c 16A power relay LZ-N RELAYS (ALZN) Protective construction: Flux-resistant type New 12. 28.8.492 RoHS compliant 1.7 (Unit: mm inch) FEATURES
ULTRA LOW POWER SMD METAL STRIP RESISTORS
Features These specification covers 2512 sized high power low resistance current sensing metal resistors. PART NUMBERING SYSTEM: - 2512 A 1W R005 F E C Type Dimensions Code 2512 Construction Resistance
HPJSeries HPJ. Ultraminiature Photoelectric Sensors with Self-contained Amplifier
Ultraminiature Photoelectric Sensors with Self-contained Amplifier HPJSeries HPJ Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8mm (thru scan model) 30
CA14 CE14. Carbon Potentiometers CA. Cermet Potentiometers CE
arbon Potentiometers E ermet Potentiometers E www.acptechnologies.com Specifications on this catalog are for reference only, as they are subject to change without notice. RBON ERMET E E mm carbon potentiometers
High Performances. Stainless steel 5% - 95% (non condensing) Vibrations (random, 2 khz) Shocks (18 ms, ½ sine) 4.1 ±0.1 Ø ±0.03 Ø 7.4 ±0.
C1516 SINGLE TURN - CONDUCTIVE POLYMER PRECISION POTENTIOMETER PRESENTATION Conductive Polymer The rotary potentiometer C1516 is provided with a bearingless design. This pancake interface, combined with
Compact Flat Size Relay for Automotive. (Unit: mm inch)
Compact Flat Size Relay for Automotive CP RELAYS Sealed 13.1.1 9..374 13.1.1 1..413 FEATURES Compact flat type PC board terminal type: 9. mm.374 inch Compact and High
Cut and formed product is available on select sizes; contact factory for details Flameproof coating per UL94 V-0 RoHS compliant / lead-free
Features: Excellent anti-surge characteristics Stable characteristics through the resistance range Good alternative to carbon composition resistors Applications include power supplies, CRT s, and antisurge
DISCONTINUED (2009) 1 POLE 16 A SLIM POWER RELAY FTR-JR Series POWER RELAY. RoHS compliant FEATURES APPLICATIONS
POWER RELAY POLE 6 A SLIM POWER RELAY RoHS compliant DISCONTINUED (9) FEATURES Pole 6A slim relay with #7 Tab terminal Nominal Power: 3 mw (3% power reduction compared to VR Series) Cadmium free contacts
MELF Coated Thin Film Precision Resistors (MELFC Series)
Features: Precision TCR of 0, 5, 25 & 50ppm/ C High reliability and stability of ±0. and ±0.5% Excellent pulse load capability Strong mechanical body due to cylindrical shape AEC-Q200 compliant RoHS and
Thick Film Chip Array Resistor
Date From Dec.. 2004 INTRODUCTION Chip array resistors are general passive component which is useful for derating voltage, current controlling in circuit and surface mounting is available. Samsung electro-mechanics
!"#$ % &"#$ ,-././ / 0. / / 1 1/ 1 ' !"%!" "&6 7-- (8$&8+. '(')*+,-+-#+.'
!"#$ % &"#$ '()*'( +!"#$,-,-././ / 0. / / 1 1/ 1 '!"%!"234534 "&6 7-- (8$&8+. "$ "$* '(')*+,-+-#+.' /'**0'(* !"!# $ % &'!!"!# $ % &'! ()#"* +!"!# $, $! "# $ $ %& !"!#$% # %&"!%'' %&%( )"%*! +,- %.&% ".%'
SPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies to 0.8mm x 1.6mm size 1/2W, fixed metal film chip resistors rectangular type for use in
POWER WIRE WOUND CHIP RESISTORS
1. Applicable Scope: This standard specification is for use in consumer electronics, computers, telecommunications, control instruments...etc. 2. Part Number: It is composed by Type, Rated Wattage, Nominal
Thick Film Resistor Networks Military, MIL-PRF Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
FEATURES MIL-PRF-83401 qualified Epoxy molded construction All device leads are hot-solder dipped Available in tube pack TCR available in "K" (± 100 ppm/ C) or "M" (± 300 ppm/ C) depending on style 100
PCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Fully sealed construction. Unique moving
CMS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION CMS T B. Please refer to the LIST OF PART NUMBERS when placing orders.
SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE FEATURES Part name over Slider Housing Slider contact Fixed contact Material Steel (SP), Tin-plated Polyamide opper alloy, Gold-plated Flammability
NPN PNP NPN PNP NPN PNP
Cam Positioner Low-Cost, High-Performance Electronic Cam Switch for Use with OMRON E6F Rotary Encoder Control outputs can be programmed to turn ON/OFF in 1 units of rotary encoder shaft rotation Handles
Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
High-ohmic/high-voltage resistors
FEATURES Types VR37 and VR68 meet the safety requirements of: UL1676 (range 51 kω to 11 MΩ) EN665 BS665 (U.K.) NFC 92-13 (France) VDE 86 (Germany) High pulse loading capability Small size. APPLICATIONS
SOLITRONICS ENGINEERING LTD. TEL: (852) FAX: (852)
RESISTOR SPECIFICATIONS Date: 19 th June 1997 RoHS COMPLIANT CARBON FILM FIXED RESISTOR SEL-RGD-1001(1) 1. FEATURES High quality at competitive prices Meet JIS-C-5202 & USA MIL-R-22684B specifications
MANUAL SETTING TYPE OPTICAL ENCODERS RE C W 20 D Model Size φ 20 mm. Without click. With click. Without click. With click.
MANUAL SETTING TYPE REC/RES FEATURES Contactless, manual adjustment only Compact, light weight (REC2, REC2C, REC2D, RE2D) Panel seal type (RESW2D, RE2D) RoHS compliant RoHS compliant PART NUMBER DESIGNATION
MANUAL SETTING TYPE OPTICAL ENCODERS RE C W 20 D Model Size φ 20 mm. Without click. Without click. With click. Without click.
MANUAL SETTING TYPE REC/RES FEATURES Contactless, manual adjustment only Compact, light weight (REC2, REC2C, REC2D, RE2D) Panel seal type (RESW2D, RE2D) RoHS compliant RoHS compliant PART NUMBER DESIGNATION
B3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Vishay Sfernice Molded Metal Film High Stability (< 0.25 % after 1000 h) FEATURES 0.1 W to 2 W at 125 C EN140100 CECC 40 101044 High climatic performance 65 C/+ 175 C/56 days High long term stability drift
Exceeds carbon comp MIL-R-11 performance Bulk and 52mm tape and reel standard, cut and formed, or radial Panasert/Avisert available upon request
Carbon Film Resistor Normal & Miniature Style & S Series Carbon Film Resistor Normal & Miniature Style Features Low cost Excellent long-term stability Tolerance: ±2%, ±5% RoHS compliant and halogen free
Pulse Withstanding Chip Resistors
Construction 1 Alumina Substrate Features: Tolerance from ±0.5% to 5%. High power rating. Excellent pulse withstanding performance. Improved working voltage ratings. Standard package sizes of 0805 to 2512.