6mm. potentiometer SMD PS-6 & PSX-6 MAIN FEATURES MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS HOW TO ORDER.

Transcription

1 6mm potentiometer SMD MECHNICL SPECIFICTIONS Stop torque: > Ncm. ( >7 in-oz) PS-6 & PSX-6 MIN FETURES Specifically designed for leadfree reflow soldering processes (excellent performance). Carbon resistive element. IP5 protection according to IEC Moisture sensitivity level 1 (PS-6). Embossed tape according to IEC :007. Wiper positioned at initial, 50% or fully clockwise. Full traceability. lso upon request: Long life model for low cost control potentiometer applications. Shaft - knob. Self extinguishable plastic UL 9V-0 (PS-6). ELECTRICL SPECIFICTIONS Mechanical rotation angle: 35 ± 5 Range of values*: 1K to 1.5M Electrical rotation angle: 00 ± 0 Std. tolerance*: 1K 500K ± 30% Torque: 0. to Ncm. 500K 1.5 ± 50% (0.3 to.7 in-oz) Taper*: Linear Nominal Power: 50 C (1 F) Operating temperature: PSX-6: 5 C + 70 C PS-6: 0 C + 85 C * Others upon request HOW TO ORDER Residual resistance: Part number examples: PS6KV : PS6 model with K rotor, V50 mounting type, 10K ohm resistive value, linear taper and 30% tolerance. PS6WV Z-PF: PS6 model with inserted knob fig. 6, 5K ohm resisitive value, linear taper, 5% tolerance, color of the knob: blue; wiper positioned at the end of the travel. OPTIONL EXTRS PS6 K V Series PS6 PSX6 Rotors Code V0 V5 V50 V55 Value Taper = Lin. Tolerance Shaft/knob 05 = Fig = Fig. 6 Knob/shaft/rotor colour RO = Red NE = Black VE = Green Z = Blue GR = Grey Wiper position [empty] = initial PM = 50% PF = Final Packaging B = Bulk K M W 10 = 1K 50 = 500K 3030 = ± 30% 5050 = ± 50% Flammability I= non flammable (Non flammable plastic for housing and rotor) ll Piher products can be adapted to meet customer s requirements. 1

2 HOW TO ORDER CUSTOM DRWING PS(x)-6KV50 + DRWING NUMBER (Max. 16 characters) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. ROTORS Note: wipers are shown positioned at 50%. W model has an factory-inserted knob. K= Cross slot thru hole STNDRD OPTIONS PSX-6 PS-6 Rotor colour... Black Grey Housing colour... Black Grey Wiper position... Initial Initial Packaging... Reel Reel Life cycles 1000 cycles Detents... None None M= Hexagonal thru hole W = with inserted shaft or knob. Default color of the knob: cream. Drawing example, W V0 with knob ref 6: S (wiper) 6.7 (final) E (initial) S E 1. 6, = =.3 DIMENSIONS - V = =.3 DIMENSIONS - V

3 DIMENSIONS - V DIMENSIONS - V POSITIONING Std. Position = CCW 50% ±35 INITIL CCW FINL CW PSX-6 RECOMMENDED REFLOW PROFILE Max. temp 0ºC Heat used to melt solder paste 00ºC (*) Preheat temp. 150ºC (*) <0 s Room temp. Between s PSX-6 TESTS (*) Melting point temp. depends on solder properties The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly or other design or process variables. Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support. VRITIONS ELECTRICL LIFE MECHNICL LIFE (CYCLES)* TEMPERTURE COEFFICIENT THERML CYCLING DMP HET VIBRTION (for each plane X,Y,Z) C; 0.10 W 10 CPM...15 CPM 5 C; +70 C C; 5 C % HR 10 Hz Hz. ±10% ±10 % ±1000 ppm ±5 % ±15 % ±3 % * Tests at room temperature. Other life cycles upon request. NOTE: Out of range values may not comply these results. Please confirm with the factory all the information before designing in. 3

4 PS-6 RECOMMENDED REFLOW PROFILE Max. temp 50ºC Heat used to melt solder paste 00ºC (*) Preheat temp. 150ºC (*) 30-5 s Room temp. Between s (*) Melting point temp. depends on solder properties The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly or other design or process variables. Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support. PS-6 TESTS VRITIONS ELECTRICL LIFE MECHNICL LIFE (CYCLES)* TEMPERTURE COEFFICIENT THERML CYCLING DMP HET VIBRTION (for each plane X,Y,Z) C; 0.10 W 10 CPM...15 CPM 0 C; +85 C 5ºC; +70 C C; 0 C % HR 10 Hz Hz. ±10% ±10 % ±1500 ppm ±1000 ppm ±5 % ±15 % ±3 % * Tests at room temperature. Other life cycles upon request. NOTE: Out of range values may not comply these results. Please confirm with the factory all the information before designing in. PCKGING V50 MODELS BULK (1000pcs / Box) EMBOSSED TPE (1000pcs / Reel) Label Direction of unreeling

5 PCKGING V0 MODELS BULK (1000pcs / Box) EMBOSSED TPE (1000pcs / Reel) Label Direction of unreeling SHFT / KNOB Ref.: 618 / Fig. 5 Ref.: 6160 / Fig Ref.: 61 For PS-6 models. Upon request

6 RECOMMENDED CONNECTIONS V CC E Piher potentiometer s recommended connection circuit for a position sensor or control application. (voltage divider circuit electronic design). R S R L C D Noise filter. Ground. R L 100 x R Disclaimer The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Piher Sensors & Controls S.., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Piher ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher s terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, US, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher Exports, Note: ll products / technologies are ER99 Classified commodities. Exports from the United States are in accordance with the Export dministration Regulations. Diversion contrary to US law is prohibited. ll Piher products can be adapted to meet customer s requirements. Please always use the latest updated datasheets published at our website ccording Pb to ELV (000/53/EC) / RoHS3 (015/863/EU) v lternative product: N6R. Datasheet available at