Thick Film Resistor Networks Military, MIL-PRF Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics

Size: px

Start display at page:

Download "Thick Film Resistor Networks Military, MIL-PRF Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics"

Hollie Anthony
5 years ago
Views:

1 FEATURES MIL-PRF qualified Epoxy molded construction All device leads are hot-solder dipped Available in tube pack TCR available in "K" (± 100 ppm/ C) or "M" (± 300 ppm/ C) depending on style 100 % screen tested per Group A, Subgroup 1 of MIL-PRF All devices are capable of passing the MIL-STD-202, Method 210, Condition D, "Resistance to Soldering Heat" test STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PINS NO./ SCHEMATIC RESISTOR POWER RATING Max. at 70 C W PACKAGE POWER RATING Max. at 70 C W RANGE Ω STANDARD TOLERANCE ± % TEMPERATURE COEFFICIENT (- 55 C to C) WEIGHT g M ± 2 (± 1, ± 5)** K, M M ± 2 (± 1, ± 5)** K, M Consult factory ± 2 (± 1, ± 5)** K, M M ± 2 (± 1, ± 5)** K, M M ± 2 (± 1, ± 5)** K, M Consult factory ± 2 (± 1, ± 5)** K, M 1.5 * K = ± 100 ppm/ C; M = ± 300 ppm/ C ** ± 1 % and ± 5 % tolerances available on request GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M M2201GBD04 (preferred part numbering format) M M G B D 0 4 MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING M = 14 Pin K = 100 ppm 3 digit significant F = ± 1 % A = Isolated D04 = Tin/Lead, Tube 02 = 16 Pin M = 300 ppm figure, followed G = ± 2 % B = Bussed by a multiplier J = ± 5 % 10R0 = 10 Ω 3302 = 33 kω 1004 = 1 MΩ Historical Part Number example: M M2201GB (will continue to be accepted) M M 2201 G B D04 MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING New Global Part Numbering: M KA001GJD04 (preferred part numbering format) M K A G J D 0 4 MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING M = 14 Pin K = 100 ppm Per std. Mil. Spec F = ± 1 % J = Dual D04 = Tin/Lead, Tube 02 = 16 Pin M = 300 ppm (see Impedence G = ± 2 % Terminator codes table) J = ± 5 % Historical Part Number example: M KA001GJ (will continue to be accepted) M K A001 G J D04 MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING For technical questions, contact: ff2aresistors@vishay.com Document Number: Revision: 28-Aug-06

2 DIMENSIONS in inches [millimeters] A ± [0.254] TYP [0.762] ± [7.87 ± 0.254] ± [6.35 ± 0.127] ± [3.05 ± 0.127] Identification ± [1.91 ± 0.381] ± [0.457 ± 0.076] [ ] [ ] ± [2.54 ± 0.254] Non-Accumulative Tol. "C" Spaces B ± [0.254] ± [1.27 ± 0.127] Min Nom Max. [7.37 Min Nom Max.] VISHAY DALE MODEL A B C MDM [19.05] [15.24] 6 MDM [21.59] [17.78] 7 IMPEDANCE CODES CODE R1 (Ω) R2 (Ω) CODE R1 (Ω) R2 (Ω) A A A A A A K 3.3K A A013 3K 6.2K A A A A A A A A K A A K TECHNICAL SPECIFICATIONS PARAMETER UNIT MDM SERIES Maximum Operating Voltage V DC 100 Voltage Coefficient of Resistance V eff < 50 ppm Dielectric Strength V AC 200 per min. Insulation Resistance Ω M Operating Temperature Range C - 55 to Storage Temperature Range C - 55 to MECHANICAL SPECIFICATIONS Marking Resistance to Solvents: Solderability: Body: Terminals: Permanency testing per MIL-PRF Per MIL-PRF Molded epoxy Copper alloy, hot-solder dipped Document Number: For technical questions, contact: ff2aresistors@vishay.com Revision: 28-Aug-06 2

3 CIRCUIT APPLICATIONS 01 SCHEMATIC MDM1401 (M xxxxxxB) MDM1601 (M xxxxxxB) 13 or 15 resistors with one pin common The MDMxx01 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin. Commonly used in the following applications: MOS/ROM Pull-up/Pull-down TTL Input Pull-down MDM1401 Open Collector Pull-up Digital Pulse Squaring MDM1601 "Wired OR" Pull-up TTL Unused Gate Pull-up Power Driven Pull-up High Speed Parallel Pull-up 03 SCHEMATIC MDM1403 (M xxxxxxA) MDM1603 (M xxxxxxA) 7 or 8 isolated resistors The MDMxx03 provides the user with a choice of 7 or 8 nominally equal resistors, with each resistor isolated from all others. Commonly used in the following applications: "Wired OR" Pull-up Long-line Impedance Balancing MDM1403 Power Driven Pull-up LED Current Limiting MDM1603 Power Gate Pull-up ECL Output Pull-down Line Termination TTL Input Pull-down 05 SCHEMATIC R1 R1 R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R2 R2 R1 R1 R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R2 R2 MDM1405, MDM1605 MDM1405 (M xxxxxxJ) MDM1605 (M xxxxxxJ) 12 or 14 resistor pairs The MDMxx05 provides the user with a choice of 12 or 14 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. CAGE CODE: Schematic 03 Schematic 05 Schematic Derating Ambient Temperature C 0.20 Ambient Temperature C 0.05 Ambient Temperature C For technical questions, contact: ff2aresistors@vishay.com Document Number: Revision: 28-Aug-06

4 PERFORMANCE TEST CONDITIONS MAX. ΔR (Typical Test Lots) Power Conditioning 1.5 x rated power, applied 1.5 hours ON and 0.5 hour OFF for 100 hours ± 4 hours at + 25 C ambient temperature ± 0.50 % ΔR Thermal Shock 5 cycles between - 65 C and C ± 0.50 % ΔR Short Time Overload 2.5 x rated working voltage 5 seconds ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) Low Temperature Operation 45 minutes at full rated working voltage at - 65 C ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) Moisture Resistance 240 hours with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR Resistance to Soldering Heat Leads immersed in C solder to within 1/16" of body for 10 seconds ± 0.25 % ΔR Shock Total of 18 shocks at 100 G's ± 0.25 % ΔR Vibration 12 hours at maximum of 20 G's between 10 and 2000 Hz ± 0.25 % ΔR Load Life 1000 hours at + 70 C, rated power applied 1.5 hours ON, 0.5 hour OFF for full 1000 hour period ± 0.50 % ΔR (Char. K) ± 2.00 % ΔR (Char. M) Terminal Strength 4.5 pound pull for 30 seconds ± 0.25 % ΔR Insulation Resistance MΩ (minimum) - Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 minute) - Document Number: For technical questions, contact: ff2aresistors@vishay.com Revision: 28-Aug-06 4

5 Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: Revision: 08-Apr-05 1

Thick Film Resistor Networks, Military, MIL-PRF Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE