Optocoupler, Phototransistor Output, AC Input, Single/Quad Channel, Half Pitch Mini-Flat Package

Transcription

1 TCMT6, TCMT46 Series Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, Single/Quad Channel, Half FEATURES Low profile package (half pitch) AC isolation test voltage 375 V RMS Low coupling capacitance of typical.3 pf Low temperature coefficient of CTR C E 9 Wide ambient temperature range Compliant to RoHS directive 22/95/EC and in accordance to WEEE 22/96EC 2 8 A C 4PIN 6 PIN 7224 C APPLICATIONS Programmable logic controllers AGENCY APPROVALS UL577, file no. E76222 system code M, double protection C-UL CSA 22.2 bulletin 5A DESCRIPTION The low profile miniflaackage includes an optocoupler with AC Input and transistor output. It is available in single channel (4 pin) TCMT6 or quad channel (6 pin) TCMT46. ORDER INFORMATION PART TCMT6 TCMT6T3 () TCMT46 TCMT46T () TCMT466 Notes Available only on tape and reel. () Product is rotated 8 in tape and reel cavity. REMARKS CTR 8 %to 3 %, single channel, SOP-4 CTR 8 % to 3 %, single channel, SOP-4 CTR 8 % to 3 %, quad channel, SOP-6 CTR 8 % to 3 %, quad channel, SOP-6 CTR % to 3 %, quad channel, SOP-6 ABSOLUTE MAXIMUM RATINGS () PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V R 6 V Forward current ± 6 ma Forward surge current t P µs SM ±.5 A Power dissipation P diss mw Junction temperature T j 25 C OUTPUT Collector emitter voltage O 7 V Emitter collector voltage V ECO 7 V Collector current I C 5 ma Collector peak current t P /T =.5, t P ms I CM ma Power dissipation P diss 5 mw Junction temperature T j 25 C Document Number: 8352 For technical questions, contact: optocoupleranswers@vishay.com Rev. 2., -Aug-9 97

2 TCMT6, TCMT46 Series Vishay Semiconductors Optocoupler, Phototransistor Output, ABSOLUTE MAXIMUM RATINGS () PARAMETER TEST CONDITION SYMBOL VALUE UNIT COUPLER AC isolation test voltage (RMS) V ISO 375 V RMS Total power dissipation P tot 25 mw Operating ambient temperature range T amb - 4 to + C Storage temperature range T stg - 4 to + C Soldering temperature (2) T sld 26 C Notes () T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage = 5 ma V F.25.6 V Junction capacitance V R = V, f = MHz C j 5 pf OUTPUT Collector emitter voltage I C = µa O 7 V Emitter collector voltage I E = µa V ECO 7 V Collector dark current = 2 V, =, E = I CEO na COUPLER Collector emitter saturation voltage = ma, I C = ma sat.3 V Cut-off frequency, = ma, R L = Ω f c khz Capacitance (input to output) f = MHz C IO.3 pf Note T amb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are noart of the testing requirements. CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT I C /, = 5 ma TCMT6 CTR 8 3 % TCMT46 CTR 8 3 % TCMT466 CTR 3 % SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Delay time Rise time Fall time Storage time Turn-on time Turn-off time V S, I C = 2 ma, R L = Ω V S, I C = 2 ma, R L = Ω V S, I C = 2 ma, R L = Ω V S, I C = 2 ma, R L = Ω V S, I C = 2 ma, R L = Ω V S, I C = 2 ma, R L = Ω t d 3 µs t r 3 µs t f 4.7 µs t s.3 µs 6 µs t off 5 µs For technical questions, contact: optocoupleranswers@vishay.com Document Number: Rev. 2., -Aug-9

3 SWITCHING CHARACTERISTICS Turn-on time Turn-off time Optocoupler, Phototransistor Output, V S, = ma, R L = kω (see figure 2) V S, = ma, R L = kω (see figure 2) TCMT6, TCMT46 Series Vishay Semiconductors PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT 9 µs t off 8 µs R G = 5 Ω T =. = 5 µs Ω Ω + 5 V I C = 2 ma; Channel I Channel II Adjusted Through Input Amplitude Oscilloscope R L = MΩ C L = 2 pf Fig. - Test Circuit, Non-Saturated Operation I C % 9 % % t d t r (= t d + t r ) t r t d t s t f t off Pulse duration t s Delay time t f Rise time t off (= t s + t f ) Turn-on time Fig. 3 - Switching Times t t Storage time Fall time Turn-off time = ma + 5 V R G = 5 Ω T =. = 5 µs Channel I Ω kω Channel II Oscilloscope R L = MΩ C L = 2 pf Fig. 2 - Test Circuit, Saturated Operation TYPICAL CHARACTERISTICS T amb = 25 C, unless otherwise specified P tot - Total Power Dissipation (mw) 3 Coupled device 25 2 Phototransistor 5 IR-diode T amb - Ambient Temperature ( C) Fig. 4 - Total Power Dissipation vs. Ambient Temperature V F - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage Document Number: 8352 For technical questions, contact: optocoupleranswers@vishay.com Rev. 2., -Aug-9 99

4 TCMT6, TCMT46 Series Vishay Semiconductors Optocoupler, Phototransistor Output, CTR rel - Relative Current Transfer Ratio = 5 ma T amb - Ambient Temperature ( C) Fig. 6 - Relative Current Transfer Ratio vs. Ambient Temperature 75 I C = 5 ma 2 ma ma 5 ma 2 ma ma Collector Emitter Voltage (V) Fig. 9 - Collector Current vs. Collector Emitter Voltage I CEO - Collector Dark Current, with Open Base (na) = 2 V = T amb - Ambient Temperature ( C) sat - Collector Emitter Saturation Voltage (V) CTR = 5 % used 2 % used % used I C Fig. 7 - Collector Dark Current vs. Ambient Temperature Fig. - Collector Emitter Saturation Voltage vs. Collector Current I C CTR - Current Transfer Ratio (%) Fig. 8 - Collector Current vs. Forward Current Fig. - Current Transfer Ratio vs. Forward Current For technical questions, contact: optocoupleranswers@vishay.com Document Number: Rev. 2., -Aug-9

5 Optocoupler, Phototransistor Output, TCMT6, TCMT46 Series Vishay Semiconductors /t off - Turn-on/Turn-off Time (µs) Saturated operation V S R L = kω t off I C /t off - Turn-on /Turn-off Time (µs) t off Non-saturated operation V S R L = Ω 8 Fig. 2 - Turn-on/Turn-off Time vs. Forward Current Fig. 3 - Turn-on/Turn-off Time vs. Collector Current PACKAGE DIMENSIONS in millimeters (inches) max. 2. max ±. 4.4 ±.2.45 ±..27 nom Possible footprint.27 (.5).9 (.35) 2 5 (.2) 7.6 (.3) Pin no. identification 6283 technical drawings according to DIN specifications Document Number: 8352 For technical questions, contact: optocoupleranswers@vishay.com Rev. 2., -Aug-9 9

6 TCMT6, TCMT46 Series Vishay Semiconductors Optocoupler, Phototransistor Output,.4 max ±.2.9. ±..45 ± nom. 7 x.27 = (.35").27 (.5").9 (.35") 2. max. Possible footprint Pin no. identification 5 (.2") 7.6 (.3") Drawing-No.: Issue: ; technical drawings according to DIN specifications PACKAGE MARKING MT6 V YWW M 68 TCMT46 V YWW M For technical questions, contact: optocoupleranswers@vishay.com Document Number: Rev. 2., -Aug-9

7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extenermitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 9 Revision: 8-Jul-8