Insulated Precision Wirewound Resistors Axial Leads
|
|
- Toby Walters
- 6 years ago
- Views:
Transcription
1 Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value and a correspondingly low temperature coefficient are required at the same time. The model resistors comply with the most stringent requirements of the CECC specification. The series consists of 5 models covering the power range from 1 W to 1 W. Non-inductive versions can be supplied on request by specifying -NI. For higher power dissipations, the use of RH series resistors is recommended. FEATURES 1 W to 1 W at 25 C Approved according to CECC According to MIL-R-26/5C and MIL-R-26/6C Excellent stability < ±.3 % after 1 h High power up to 1 W at 25 C Low ohmic values 1 m available Low temperature coefficient ± 5 ppm/ C Electrical insulation Climatic protection Termination = Pure matte tin or Sn/Ag/Cu according to the ohmic value Material categorization: for definitions of compliance please see DIMENSIONS in millimeters INSULATED 25 min. A 25 min. Ø E Ø B Ø a ±.2 SERIES AND STYLE A MAX. R >.15 Ø B MAX. R.15 E ±.1 WEIGHT g 45 chamfer max..25 mm deep 4 4 L max. MOLDED 25 min. A 25 min. 1-2 a = 1 mm a = 1.2 mm Ø E Ø B K TECHNICAL SPECIFICATIONS VISHAY SFERNICE SERIES AND STYLE Reference CECC A B C D E Cross-Reference NF C83-21 RP8 RP7 RP4 RP5 RP6 Cross-Reference MIL-R-26/5C and MIL-R-26/6C RW81 RW8 RW79 RW74 RW78 Power Rating, Pr CECC Power Extended Sfernice Power Ohmic Range in Relation to Tolerance Qualified Ohmic Value Range CECC at 25 C, P 25 at 7 C, P 7 at 25 C, P 25 at 7 C, P 7 ± 5 % E24 ± 2 % E48 ± 1 % E96 ±.5 % E96 Note Undergoes European Quality Insurance System (CECC) Revision: 2-Apr-15 1 Document Number: 59 1 W.8 W 1 W.8 W.5 to.5 to.5 to.4 to 1.5 W 1.25 W 2 W 1.65 W.25 to.25 to.25 to.4 to 2.5 W 2 W 3 W 2.5 W.1 to.3 to.3 to.499 to W 5 W.2 to.2 to.2 to.3 to ±.1 % E96 Please consult 1 to 47.2 to 1.78 k.1 to 3.57 k.1 to 12.1 k 1 W 8.2 W.6 to 15 k.6 to 15 k.6 to 15 k.3 to 15 k.1 to 4. Limiting Element Voltage, U max. AC/DC 5 V 12 V 2 V 3 V 72 V Critical Resistance Out of nominal ohmic range 17 8 W 51 1 W
2 STANDARD ELECTRICAL SPECIFICATIONS MODEL RESISTANCE RANGE RATED POWER P 25 C W TOLERANCE ± % 1.5 to 2K 1.1,.2,.5, 1, 2, to 6.8K 2.1,.2,.5, 1, 2, to 15K 3.1,.2,.5, 1, 2, to 59K 6.1,.2,.5, 1, 2, to 15K 1.1,.2,.5, 1, 2, 5 MECHANICAL SPECIFICATIONS Series and Style 1, 2 3, 6, 1 Encapsulant Resistive Element Ceramic Substrate Termination High temperature mold compound High temperature silicone coating CuNi or NiCr Alumina or steatite Pure matte tin or Sn/Ag/Cu ENVIRONMENTAL SPECIFICATIONS Temperature Range -55 C to 275 C Climatic Category (LCT/UCT/days) 55/2/56 PERFORMANCE TESTS Short Time Overload Load Life Dielectric w/s Voltage Rapid Change of Temperature Climatic Sequence Humidity (Steady State) Shock Vibration Load Life at Upper Category Temperature CONDITIONS 6.25 Pr Extended Sfernice Power or U = 2 U max. /5 s for 1, 2, 3 12 Pr Extended Sfernice Power or U = 2 U max. /5 s for 6, 1 9 /3 cycles 1 h Pr Extended Sfernice Power + 25 C U RMS = 5 V/6 s IEC Test Na 5 cycles (3 at LCT/3 at UCT) -55 C / +2 C -55 C / +2 C/56 days IEC Test Ca 95 % HR/4 C 56 days IEC Test Ea 5 g s/half sine/ 3 times by direction (i.e. 18 shocks) IEC Test Fc 1 Hz / 55 Hz 9 / 3 cycles 1 h Pr Extended Sfernice Power +2 C REQUIREMENTS ( R/R OR INDICATED PARAMETER) CECC ± (.25 % +.5 ) ± (.5 % +.5 ) Insulation R 1 G No flashover or breakdown Leakage current < 1 μa ± (.25 % +.5 ) ± (.5 % +.5 ) ± (.5 % +.5 ) Insulation R 1 M ± (.25 % +.5 ) ± (.25 % +.5 ) ± (.5 % +.5 ) Insulation R 1 G Revision: 2-Apr-15 2 Document Number: 59
3 TEMPERATURE COEFFICIENT in the range -55 C to +2 C OHMIC RANGE REQUIREMENT CECC < 1 ± 1 ppm/ C 1 to < 1 ± 5 ppm/ C 1 ± 25 ppm/ C STABILITY AND POWER RATING Stability changes slightly according to power rating and ambient temperature. This fact is especially important for users needing a life drift lower than the initial resistance tolerance. Typical drifts, after 2 h life test made under the 9 / 3 conditions and at an ambient temperature of 25 C, are: OHMIC RANGE R %/R % Pr 1 W 2 W 3 W 5 W 1 W.3.5 Pr.5 W 1 W 1.5 W 2.5 W 5 W.15 POWER RATING 125 TEMPERATURE RISE 25 RATED POWER IN % HOT SPOT TEMPERATURE IN C AMBIENT TEMPERATURE IN C NON INDUCTIVE WINDING (NI) Non inductive (Ayrton Perry) winding available. Please consult. INDUCTANCE (Example) INDUCTANCE IN µh W 3 NI 1 W FREQUENCY IN MHz PACKAGING (see datasheet 532 and 533) Reel of 1 units for 1, 2, 3 Ammopack of 5 units for 1, 2, 3 Bag of 1 units for 1, 2 Blister of 2 units for 3 Box of 5 units for 6, 1 MARKING RATED POWER IN W trademark, series, style, CECC style (if applicable) nominal resistance (in, k ), tolerance (in %), manufacturing date. Revision: 2-Apr-15 3 Document Number: 59
4 ORDERING INFORMATION 1 5R5 J R15 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING GLOBAL PART NUMBER INFORMATION R L P R J B GLOBAL MODEL SIZE OPTION OHMIC VALUE TOLERANCE PACKAGING SPECIAL N = non inductive winding The first four digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. 68R = = 2.3 k 88R88 = B =.1 % C =.2 % D =.5 % F = 1 % G = 2 % J = 5 % Standard packaging: Size 1 and 2: S14 = bag, 1 pieces size 3: B15 = bulk, 2 pieces size 6 and 1: B25 = box, 5 pieces As applicable Ex = MEX Revision: 2-Apr-15 4 Document Number: 59
5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 217 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-17 1 Document Number: 91
Insulated Precision Wirewound Resistors Axial Leads
Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value
More informationPower Resistor, for Mounting onto a Heatsink Thick Film Technology
Power Resistor, for Mounting onto a Heatsink Thick Film Technology FEATURES 5 W to 50 W High power rating DESIGN SUPPORT TOOLS Models Available click logo to get started High overload capabilities up to
More informationMolded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Vishay Sfernice Molded Metal Film High Stability (< 0.25 % after 1000 h) FEATURES 0.1 W to 2 W at 125 C EN140100 CECC 40 101044 High climatic performance 65 C/+ 175 C/56 days High long term stability drift
More informationFully Sealed Container 12 mm Square or Round Single-Turn Cermet Trimmer
Fully Sealed Container 12 mm Square or Round Single-Turn Cermet Trimmer The trimming potentiometers T12 and T13 fully meet the requirements of CECC 41 100. The use of a cermet track combined with sealing
More informationPower Resistor, for Mounting onto a Heatsink Thick Film Technology
Power Resistor, for Mounting onto a Heatsink Thick Film Technology FEATURES 5 W to 50 W High power rating Manufactured in cermet thick film technology, these power resistors exhibit remarkable characteristics
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationWirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount
Wirewound Resistors, Military, MIL-PRF-18546 Qualified, Type RE, Aluminum Housed, Chassis Mount STANDARD ELECTRICAL SPECIFICATIONS MILITARY VISHAY REFERENCE POWER RATING P 25 C W FEATURES Molded construction
More informationFEATURES APPLICATIONS DESCRIPTION UNIT HVR25 HVR37. ± 5; E24 series
High Ohmic (up to 10 M)/High Voltage (up to 3.5 kv) Metal Film Leaded Resistors FEATURES Technology: Metal film High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free
More informationSurface Mounted Power Resistor Thick Film Technology
Surface Mounted Power Resistor Thick Film Technology DIMENSIONS in millimeters FEATURES AEC-Q200 qualified 25 W at 25 C case temperature Surface mounted resistor - TO-252 (DPAK) style package Wide resistance
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology FEATURES AEC-Q200 qualified 20 W at 25 C case temperature Surface mounted resistor - TO-263 (D 2 PAK) style package Wide resistance range from 0.01 to
More informationSurface Mounted Power Resistor Thick Film Technology
DIMENSIONS in millimeters FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263 (D 2 PAK) style package Wide resistance range from 0.01 to 550 k Non inductive Resistor
More informationFully Sealed Container Cermet Potentiometer Professional Grade
Fully Sealed Container Cermet Potentiometer Professional Grade T Q O QUICK REFERENCE DATA Multiple module Switch module Detent module Special electrical laws No n/a n/a A: linear, L: logarithmic, F: reverse
More informationPower Resistors for Mounting onto a Heatsink Thick Film Technology
Power Resistors for Mounting onto a Heatsink Thick Film Technology FEATURES 1% tolerance available High power rating = 200 W Wide ohmic value range = 0.046 to 1 M Non inductive Easy mounting Low thermal
More informationPower Resistors Cooled by Auxiliary Heatsink (Not Supplied) Thick Film Technology
Power Resistors Cooled by Auxiliary Heatsink (Not Supplied) Thick Film Technology FEATURES Cold system without external radiation High power / volume ratio Non-inductive Screw-on or fast-on outputs DESIGN
More informationSingle Phase Bridge Rectifier, 2 A
Single Phase Bridge Rectifier, 2 A FEATURES Suitable for printed circuit board mounting Compact construction High surge current capability Material categorization: for definitions of compliance please
More informationKnob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x
Knob Potentiometer P6, PA6 DESIGN SUPPORT TOOLS click logo to get started FEATURES Test according to CECC 4000 or IEC 60393- P6 - version for professional and industrial applications (cermet) W at 40 C
More informationKnob Potentiometer with Switch
Knob Potentiometer with Switch, The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting
More informationLead (Pb)-Bearing Thick Film, Rectangular Chip Resistors
Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors FEATURES High pulse performance (time/power) Metal glaze on high quality ceramic Protective overglaze Lead (Pb)-bearing solder contacts on Ni barrier
More informationCeramic Disc Capacitors Class 2, 500 V DC, 1 kv DC, General Purpose
Ceramic Disc Capacitors Class 2, 500 V DC, 1 kv DC, General Purpose FEATURES High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS Directive 2011/65/EU APPLICATIONS Bypassing
More informationFully Sealed Container Cermet Potentiometers Submarine Applications
Fully Sealed Container Cermet Potentiometers Submarine Applications FEATURES High power rating 1.5 W at 70 C Stainless steel shaft and bushing to endure sea salt water immersion Fully sealed IP68 on panel
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance Stability R/R 1 % for 0 h at 70 C Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free and lead
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A PRIMARY CHARACTERISTICS I O 1.9 A V RRM 5 V to 1 V Package Circuit configuration Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y2, 300 V AC / 250 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, V AC / Class Y, V AC / V AC FEATURES Complying with IEC 638-1 3 rd edition High reliability Complete range of capacitance values Radial leads Singlelayer
More informationAluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance, High Vibration Capability 40 RTM lower Z longer life 50 RMI 25 C 46 RTI high vibration QUICK REFERENCE DATA DESCRIPTION VALUE Nominal
More informationThick Film Resistor Networks, Military, MIL-PRF Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP
MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE
More informationFully Sealed Potentiometer Professional Grade
Fully Sealed Potentiometer Professional Grade PE0 QUICK REFERENCE DATA Multiple module No Switch module n/a Detent module Yes Special electrical laws A: linear, L:, F: reverse Sealing level IP 67 Lifespan
More informationSurface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 03028
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 03028 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Small case size (0603)
More informationAluminum Electrolytic Capacitors Axial High Temperature, High Ripple Current
Aluminum Electrolytic Capacitors Axial High Temperature, High Ripple Current smaller 9 AHT-DIN 8 AHT lower dimensions higher ripple Fig. 25 C 38 AML QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case
More informationAC Line Rated Disc Capacitors Class X1, 400 V AC /Class Y2, 300 V AC
LV Series AC Line Rated Disc Capacitors Class X1, V AC /Class Y2, V AC FEATURES Complying with IEC 6384-14 3 rd edition High reliability Complete range of capacitance values Radial leads Singlelayer AC
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Frequency Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency Applications FEATURES Ultra-stable dielectric offering a Temperature Coefficient of Capacitance (TCC) of 0 ppm/ C ± 30 ppm/ C over the
More informationLower Voltage Ceramic Singlelayer DC Disc Capacitors 1 kv DC to 3 kv DC Low Dissipation Factor
Lower Voltage Ceramic Singlelayer DC Disc Capacitors 1 kv DC to 3 kv DC Low Dissipation Factor FEATURES Low losses High stability Low DF minimizes self heating at HF Ideal for high switching to khz Radial
More informationRCH Vishay Sfernice Power Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Power Resistors, for Mounting onto a Heatsink FEATURES 5 W to 50 W High power rating Manufactured in cermet thick film technology, these power resistors exhibit remarkable characteristics and the series
More informationSmall Signal Switching Diode
Small Signal Switching Diode 2 DESIGN SUPPORT TOOLS click logo to get started 3 FEATURES Silicon epitaxial planar diode Fast switching diode in case SOT-23, especially suited for automatic insertion AEC-Q
More informationSingle Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationAluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 056/057 PSM-SI miniaturized 156 PUM-SI Fig. 1 high voltage 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in
More informationThin Film Bar MOS Capacitors
Thin Film Bar MOS Capacitors FEATURES Robust MOS construction Allows for multiple wire bonds. At the lowest values, case A will accept 7 bonds and case B will accept 15. Low D, high Q Excellent load life
More informationThin Film Mini-MELF Resistors
FEATURES Advanced thin film technology AEC-Q2 qualified Low TCR and tight tolerances Excellent stability in different environmental conditions Pure tin termination on nickel barrier, plated on press fit
More informationAluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar
Aluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar FEATURES Long useful life: 6000 h at +105 C Specified for 500 V, 50 C operation High ripple current capability High reliability
More informationAluminum Electrolytic Capacitors Power Miniaturized General Purpose - Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized General Purpose - Snap-In FEATURES Useful life: 2000 h at +105 C, > 5000 h at +85 C Voltage range from 16 V to 100 V Polarized aluminum electrolytic
More informationSmall Signal Switching Diode, Dual
Small Signal Switching Diode, Dual 3 1 2 18108_1 DESIGN SUPPORT TOOLS click logo to get started FEATURES Silicon epitaxial planar diode Fast switching dual diode with common cathode AEC-Q101 qualified
More informationLead (Pb)-Bearing High Stability Thin Film Chip Resistors
Lead (Pb)-Bearing High Stability Thin Film Chip Resistors High Stability Thin Film Chip Resistors are the perfect choice for most fields of modern electronics where lead (Pb)-bearing terminations are mandatory
More informationESCC ( ) 4001/023 Qualified R Failure Rate High Precision (10 ppm/ C, 0.05 %) Thin Film Chip Resistors
ESCC ( ) 4001/023 Qualified R Failure Rate High Precision (10 ppm/ C, 0.05 %) Thin Film Chip Resistors DESIGN SUPPORT TOOLS Models Available click logo to get started Sfernice Thin Film division holds
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO35 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 8.8 1.25 4.5 FEATURES 35 W at 25 C case temperature Surface mounted resistor - TO-263 (D 2 PAK) style package Wide resistance range
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-28AB PRIMARY CHARACTERISTICS V BR 27 V P PPM ( x μs) 36 W P D 5 W V WM 22 V I RSM 7 A I FSM
More informationSingle-Line ESD Protection in SOT-23
Single-Line ESD Protection in 3 1 2 20421 MARKING (example only) XX YYY XX 20512 YYY = type code (see table below) XX = date code 20357 1 FEATURES Single-line ESD-protection device ESD-protection acc.
More informationFully Sealed Container Cermet Potentiometers Submarine Applications
FEATURES High power rating W at 70 C Stainless steel shaft and bushing to endure sea salt water immersion Fully sealed IP68 on panel Tight temperature coefficient (± 75 ppm/ C typical) Compliant to RoHS
More informationEnhanced isocink+ Bridge Rectifiers
Enhanced isocink+ Bridge Rectifiers - ~ ~ + isocink+ Case Style BU PRIMARY CHARACTERISTICS Package BU I F(AV) 5 A V RRM 6 V, 8 V, V I FSM 2 A I R 5 μa V F at I F = 7.5 A.87 V T J max. 5 C Circuit configuration
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A VS- Series PRODUCT SUMMARY I O V RRM Package Circuit 1.9 A 1 V to 1 V Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard 2.54
More information3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer
3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer 43 FEATURES W at 70 C Wide ohmic value range (10 Ω to 5 MΩ) Panel mount available Multi-finger wiper for better C.R.V. Tests according to CECC 41000 or
More informationAluminum Electrolytic Capacitors Radial Low Profile, 5 mm
Aluminum Electrolytic Capacitors Radial Low Profile, 5 mm 038 RSU 097 RLP 7 higher CV-values 5 mm ig. 1 longer life SMD 153 CRV QUICK REERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm)
More informationHigh Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V Test current I ZT.7 to 2 ma V Z specification Thermal equilibrium Int. construction Single FEATURES Silicon
More informationSingle Phase Rectifier Bridge, 3 A, 6 A
S-, S- Series Single Phase Rectifier Bridge, 3 A, 6 A FEATURES Suitable for printed circuit board or chassis mounting Compact construction High surge current capability Material categorization: for definitions
More informationUF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier
UF400, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier FEATURES Glass passivated chip junction Ultrafast reverse recovery time Low forward voltage drop Low switching losses,
More informationThick Film, Rectangular Chip Resistors for Conductive Gluing
Thick Film, Rectangular Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS SIZE RATED LIMITING DISSIPATION ELEMENT MODEL INCH METRIC P 7 VOLTAGE W U max. AC/DC D AP 4 RR M D AP 63 RR 68M D AP 8 RR M D AP
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323
VCAN26A2-3G Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323 3 1 2 22742 MARKING (example only) 22743 WW VY ABC ABC = type code (see table below) WW = date code
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationSurface Mount Power Voltage-Regulating Diodes
Surface Mount Power Voltage-Regulating Diodes DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Low Zener impedance Low regulation factor Meets MSL level, per J-STD-2, if maximum
More informationFast Avalanche Sinterglass Diode
Fast Avalanche Sinterglass Diode DESIGN SUPPORT TOOLS 949588 click logo to get started FEATURES Glass passivated Hermetically sealed package Very low switching losses Low reverse current High reverse voltage
More informationSurface Mount Ceramic Chip Antennas for 2.4 GHz
Surface Mount Ceramic Chip Antennas for 2.4 GHz chip antenna The VJ5106W240 series are small form-factor, high-performance chip-antennas designed to be used in wireless, bluetooth and ISM band 2.4 GHz.
More informationSmall Signal Fast Switching Diode
DESIGN SUPPORT TOOLS click logo to get started Small Signal Fast Switching Diode FEATURES Silicon epitaxial planar diode Fast switching diode AEC-Q qualified available (part number on request) Base P/N-G3
More informationFRED Pt Gen 4 Single Ultrafast Diode, 500 A (INT-A-PAK Power Modules)
FRED Pt Gen 4 Single Ultrafast Diode, 5 A (INT-A-PAK Power Modules) VS-VSKEF5/6PbF INT-A-PAK PRODUCT SUMMARY V R 6 V I F(AV) at T C 5 A at 55 C t rr at 4 ns Type Modules - diode, high voltage Package INT-A-PAK
More informationHEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules) INT-A-PAK PRIMARY CHARACTERISTICS V R 1200 V V F (typical) at 300 A at 2.18 V t rr (typical) at 45 A 233 ns I F(DC) at T C 300 A at 60 C Package
More informationFully Sealed Potentiometer Military and Professional Grade
PE0 Fully Sealed Potentiometer Military and Professional Grade DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02") FEATURES High power rating W at 70 C Low temperature coefficient (150 ppm/ C typical)
More informationFEATURES. Package. PARAMETER SYMBOL PB3506 PB3508 PB3510 UNIT Maximum repetitive peak reverse voltage V RRM V 35 T A = 25 C (2) 4.
PB356, PB358, PB35 Enhanced isocink+ TM Bridge Rectifiers + isocink+ ~ ~ - - ~ ~ + ~ ~ Case Style PB FEATURES UL recognition file number E32394 (QQQX2) UL 557 (see *) Enhanced high-current density single
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23
VCAN26A2-3S Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23 FEATURES 3 For CAN and FLEX-Bus applications Small SOT-23 package AEC-Q1 qualified available 1 2 22742
More informationSmall Signal Zener Diodes
BZX8-Series PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T ; specification Pulse current Int. construction Single Small Signal Zener Diodes FEATURES Silicon planar Zener diodes
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationSurge Metal Film Leaded Resistor
Surge Metal Film Leaded Resistor FEATURES Metal film technology High pulse load (up to 10 kv) capability Replacement for carbon-composition resistors Compatible with lead (Pb)-free and lead containing
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationSingle Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
More informationMetal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics Exceptionally
More informationSilicon PIN Photodiode
BPVNF Silicon PIN Photodiode DESCRIPTION 640- BPVNF is a PIN photodiode with high speed and high radiant sensitivity in black, T-¾ plastic package with daylight blocking filter. Filter bandwidth is matched
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationThin Film Rectangular Chip Resistors
www.vishay.com,,, Thin Film Rectangular Chip Resistors FEATURES Metal film layer on high quality ceramic Protective top coat Pure tin on nickel barrier layer Low temperature coefficient and tight tolerances
More informationDual Common Cathode Ultrafast Plastic Rectifier
Dual Common Cathode Ultrafast Plastic Rectifier TO-2AB UGE8xCT PIN PIN 2 3 2 FEATURES Power pack Glass passivated pellet chip junction Ultrafast recovery time Low switching losses, high efficiency Low
More informationZener Diodes with Surge Current Specification
Zener Diodes with Surge Current Specification SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. to 7 V Test current I ZT to 5 ma V BR 9.4 to 5 V V WM 8. to V P PPM 3 W T J max. 5
More informationHigh Voltage Glass Passivated Junction Plastic Rectifier
High Voltage Glass Passivated Junction Plastic Rectifier SUPERECTIFIER FEATURES Superectifier structure for high reliability application Cavity-free glass-passivated junction Low leakage current High forward
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes FEATURES Zener voltage specified at 5 μa Maximum delta V Z given from μa to μa Very high stability Low noise AEC-Q qualified Material categorization: For definitions of compliance
More informationSingle Phase Rectifier Bridge, 2 A
Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current
More informationGlass Passivated Ultrafast Plastic Rectifier
Glass Passivated Ultrafast Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability condition Cavity-free glass-passivated junction Ideal for printed circuit
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More informationFusible Power Metal Film Leaded Resistors
Fusible Power Metal Film Leaded NFR1, NFR2, NFR3 FEATURES Metal film technology High power (upto 3 W) in small package Small standard sizes (27/414/617) High stability, reliability and uniformity characteristics
More informationWirewound/Metal Film Resistors, Commercial Power, Radial Lead
RMW, RMF End-of-Life Product FEATURES High power dissipation in small volume Very stable mounting Non-flammable High pulse load handling capabilities High heat and moisture resistance Various terminal
More informationUltrafast Avalanche SMD Rectifier
Ultrafast Avalanche SMD Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.5 A V RRM V I FSM 3 A I R 5. μa t rr 75 ns V F 1.7 V E R 2 mj T J max. 15 C Package Diode variations Single FEATURES Low profile package
More informationFEATURES ± [0.64 ± 0.05] dia. (no. 22 AWG) tinned nickel leads solderable and weldable
SuperTan Wet Tantalum Capacitors s capacitor represents a major breakthrough in wet tantalum technology. Its unique cathode system provides the highest capacitance per unit volume. The design facilitates
More informationHigh Intensity LED in Ø 3 mm Tinted Diffused Package
High Intensity LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 19222 This device has been designed to meet the increasing demand for AlInGaP technology. It is housed in a 3 mm diffused plastic package.
More informationSingle phase bridge. (Power Modules), 25 A, 35 A
Single Phase Bridge (Power Modules), 25 A, 35 A GBPC...A GBPC...W PRIMARY CHARACTERISTICS I O 25 A, 35 A V RRM V to V Package GBPC..A, GBPC..W Circuit configuration Single phase bridge FEATURES Universal,
More informationHEXFRED Ultrafast Diodes, 100 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, A (INT-A-PAK Power Modules) INT-A-PAK PRIMARY CHARACTERISTICS V R 1200 V V F (typical) 2.5 V t rr (typical) 150 ns I F(DC) at T C 110 A at C Package INT-A-PAK Circuit configuration
More informationZener Diodes FEATURES
ZPYV9 to ZPY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT FEATURES Silicon planar power Zener diodes For use in stabilizing and clipping circuits with high power rating The Zener voltages
More informationMetal Film Resistors, Non-Magnetic, Industrial, Precision
CMF Non-Magnetic Metal Film Resistors, Non-Magnetic, Industrial, Precision STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MAXIMUM WORKING VOLTAGE (1) V (1) Continuous working voltage shall be P x
More informationVersatile Planar Transformer
Versatile Planar Transformer QUICK REFERENCE DATA Type Transformer Size (L x W x H) 40 mm x 35 mm x 2 mm Terminals SMD or through holes Power Up to 220 W Frequency range 50 khz to 400 khz Inductance range
More informationSingle phase bridge. (Power Modules), 25 A / 35 A
Single Phase Bridge (Power Modules), 25 A / 35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 200 V to 1200 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
More informationSingle-Line ESD Protection in SOT-23
Single-Line ESD Protection in FEATURES 3 Single-line ESD-protection device ESD-protection acc. IEC 61000-4-2 contact discharge air discharge 1 2 20421 20512 1 Space saving package AEC-Q101 qualified e3-
More informationZener Diodes FEATURES
ZMYV9 to ZMY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom..9 to V FEATURES Silicon planar power Zener diodes For use in stablilizing and clipping circuits with high power rating
More informationMetal Film Resistors, Non-Magnetic, Industrial, Precision
CMF Non-Magnetic Metal Film Resistors, Non-Magnetic, Industrial, Precision STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MAXIMUM WORKING VOLTAGE (1) V (1) Continuous working voltage shall be P x
More informationAmbient Light Sensor
Ambient Light Sensor FEATURES Package type: Surface mount Package form: 0805 Dimensions (L x W x H in mm): 2 x 1.25 x 0.85 Radiant sensitive area (in mm 2 ): 0.27 AEC-Q101 qualified High photo sensitivity
More informationAnalog Rectilinear Displacement Sensor
Analog Rectilinear Displacement Sensor FEATURES Conductive plastic potentiometer technology. Infinite resolution Anodized light alloy housing Precious metal multi-contact wiper Stainless steel floating
More information