Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics

Size: px

Start display at page:

Download "Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics"

Marianna Hubbard
6 years ago
Views:

1 Thick Film Resistor Networks STANDARD ELECTRICAL SPECIFICATIONS GLOAL / RESISTOR POWER RATING max. at 70 C 1) RANGE Ω A 0.20 W xxx W M A 0.30 W xxx W M A 0.20 W xxx W M Notes 1. For resistor power ratings at + 25 C see derating curves. See derating curves for Package Power Rating. GLOAL PART NUMER INFORMATION FEATURES ody height: A profile = 0.195" [4.95 mm]; profile = 0.295" [7.50 mm] A profile standard in 4 thru 12 pins Thick film resistive elements Reduces total assembly costs Resistor elements protected by tough epoxy conformal coating Wide resistance range (10 Ω to 2.2 MΩ) Available in bulk pack (preferred) or tube pack Lead (Pb)-free version is RoHS Compliant (RoHS Directive 2002/95/EC) TEMP. COEFFICIENT (- 55 C to C) ppm/ C STANDARD % 2. Contact factory for 1 %. TCR TRACKING 1) (- 55 C to C) ppm/ C OPERATING VOLTAGE V DC max. * Pb containing terminations are not RoHS compliant, exemptions may apply. Lead (Pb)-free version meets EIA/ECA-C23 Rev. G whisker test requirements for Class 1A products. For technical questions, contact: ff2aresistors@vishay.com Document Number: Revision: 30-Jul-07 New Global Part Numbering: 08A03100RGDA (preferred part number format) GLOAL 04 = 4 Pin 08 = 8 Pin 12 = 12 Pin A = A Profile = Profile 01 = ussed 03 = Isolated 00 = Special R = Decimal K = Thousand M = Million 10R0 = 10 Ω 680K = 680 kω 1M00 = 1.0 MΩ F = ± 1 % G = ± 2 % J = ± 5 % S = Special ± 2 (1 %) 2) ± ± 2 (1 %) 2) ± ± 2 (1 %) 2) ± C S C 0 8 A R G D A EK = Lead (Pb)-free, ulk EJ = Lead (Pb)-free, Tube PA = Tin/Lead, ulk DA = Tin/Lead, Tube SPECIAL lank = Standard (Dash Number) (up to 3 digits) From as applicable Historical Part Number example: 08A03101G (will continue to be accepted) 08 A G D03 HISTORICAL New Global Part Numbering: 08A05131AGPA (preferred part number format) GLOAL C S C 0 8 A A G P A 04 = 4 Pin 08 = 8 Pin 12 = 12 Pin A = A Profile = Profile 05 = Dual Terminator 3 digit impedance code, followed by alpha modifier (see impedance codes table) F = ± 1 % G = ± 2 % J = ± 5 % EK = Lead (Pb)-free, ulk EJ = Lead (Pb)-free, Tube PA = Tin/Lead, ulk DA = Tin/Lead, Tube SPECIAL lank = Standard (Dash Number) (up to 3 digits) From as applicable Historical Part Number example: 08A G (will continue to be accepted) 08 A G P03 HISTORICAL 1 2

2 Thick Film Resistor Networks TECHNICAL SPECIFICATIONS PARAMETER UNIT SERIES Voltage Coefficient of Resistance V eff < 50 ppm typical Dielectric Strength V AC 200 Isolation Resistance (03 Schematic) Ω > 100M Operating Temperature Range C - 55 to DIMENSIONS in inches [millimeters] A Max [2.49] Max. C Max ± [3.30 ± 0.254] ± [2.54 ± 0.254] Non-Accumulative Pi n # [1.27] Max [0.813] ± [0.457 ± 0.076] [1.14] ± [0.305 ± 0.076] (Leads are along centerline of body) 01 GLOAL 03 GLOAL n-1 n 05 GLOAL R 2 R 1 NUMER OF A (Maximum) C (Maximum) [9.90] [7.62] [12.45] [10.16] [14.99] [12.70] [17.53] [15.24] [20.07] [17.78] [22.61] [20.32] [25.15] [22.86] [27.69] 1.00 [25.40] [30.23] [27.94] NUMER OF Profile = [7.50] A (Maximum) C (Maximum) [9.90] [7.62] [14.99] [12.70] [20.07] [17.78] [25.15] [22.86] [30.23] [27.94] NUMER OF Profile = [7.50] A (Maximum) C (Maximum) [9.90] [7.62] [12.45] [10.16] [14.99] [12.70] [17.53] [15.24] [20.07] [17.78] [22.61] [20.32] [25.15] [22.86] [27.69] 1.00 [25.40] [30.23] [27.94] Profile = [7.50] Document Number: For technical questions, contact: ff2aresistors@vishay.com Revision: 30-Jul-07 2

3 Thick Film Resistor Networks MECHANICAL SPECIFICATIONS Marking Resistance to Solvents: Solderability: ody: Terminals: Permanency testing per MIL-STD-202, Method 215 Per MIL-STD-202, Method 208E, RMA flux High alumina, epoxy coated Solder plated leads STOCKED S IN OHMS ( G ) Standard E-24 resistance values stocked. Consult factory. Many dual terminator resistance values stocked. Consult factory. IMPEDANCE S R 1 (Ω) R 2 (Ω) R 1 (Ω) R 2 (Ω) A A C A A C C K C K 121C A 1.5K 3.3K 131A K 6.2K A Profile Power Rating (W) A Package 08A Package 06A Package Single Resistor 03 Schematic 10 and 05 Schematics A PROFILE + 70 C RATINGS 12A 1.5 W 11A 1.37 W 10A 1.25 W 09A 1.12 W 08A 1.00 W 07A 0.87 W 06A 0.75 W 05A 0.62 W 04A 0.40 W Deratin g Ambient Te mperature C Profile Power Rating (W) 10 Package Packag e Package Single Resisto r Schematic 01 and 05 Schematics Deratin g Ambient Te mperature C PROFILE + 70 C RATINGS W W W W W W W W W For technical questions, contact: ff2aresistors@vishay.com Document Number: Revision: 30-Jul-07

4 Thick Film Resistor Networks CIRCUIT APPLICATIONS 01 Schematic ussed The xxx01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (Pin No. 1). Commonly used in the following applications: Wired OR Pull-up Open Collector Pull-up Power Gate Pull-up TTL Input Pull-down MOS/ROM Pull-up/Pull-down TTL Unused Gate Pull-up * A profile standard, Profile available. 03 Schematic Isolated n-1 n The xxx03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: Wired OR Pull-up Long-Line Impedance alancing Power Driven Pull-up LED Current Limiting Power Gate Pull-up ECL Output Pull-down Line Termination TTL Input Pull-down * A Profile standard, Profile available. 05 Schematic R 2 R 1 Dual Terminator The xxx05 circuits contain series pairs of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. * A profile standard, Profile available. PERFORMANCE TEST CONDITIONS MAX. ΔR (Typical Test Lots) Thermal Shock 5 cycles between - 65 C and C ± 0.50 % ΔR Short Time Overload 2.5 x rated working voltage, 5 seconds ± 0.25 % ΔR Low Temperature Operation 45 minutes at full rated working voltage at - 65 C ± 0.25 % ΔR Moisture Resistance 240 hours with humidity ranging from 80 % RH to 98 % RH ± 1.00 % ΔR Resistance to Soldering Heat Leads immersed in C solder to within 1/16" of body for 3 seconds ± 0.25 % ΔR Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR Vibration 12 hours at maximum of 20 g's between 10 and 2000 Hz ± 0.25 % ΔR Load Life 1000 hours at + 70 C, rated power applied 1.5 hours ON, 0.5 hours OFF for full 1000 hours period. Derated according to the curve. ± 1.00 % ΔR Terminal Strength 4.5 pound pull for 30 seconds ± 0.25 % ΔR Insulation Resistance MΩ (minimum) - Dielectric Withstanding Voltage No evidence of arcing or damage (200 V rms for 1 minute) - Document Number: For technical questions, contact: ff2aresistors@vishay.com Revision: 30-Jul-07 4

5 Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: Revision: 08-Apr-05 1

Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics

MDP 01,, 05 Thick Film Resistor Networks, Dual-In-Line, STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL/ NO. OF PINS MDP 14 MDP 16 SCHEMATIC 01 05 01 RESISTOR POWER RATING Max. AT 70 C W 0.250 0.250 RESISTANCE