DISCONTINUED (2009) 1 POLE 16 A SLIM POWER RELAY FTR-JR Series POWER RELAY. RoHS compliant FEATURES APPLICATIONS
|
|
|
- Basil Lang
- 6 years ago
- Views:
Transcription
![magnetron, and heater ORDERING INFORMATION FTR-JR J B W ** [Eample] (a) (b) (c) (d) (e) (f) ( a) Series Name ( b) Contact Arrangement J : Tab termina l (#7) ( c) Coil Type ( d)](/docs-images/72/67235668/images/1-2.jpg "Coil Nominal Voltage ( e) Contact Material ( f) Custom Designation B : 3 mw (TAB and PCB terminals connected) C : 3mW (TAB and PCB terminals unconnected) : : : W : Silver alloy")
1 POWER RELAY POLE 6 A SLIM POWER RELAY RoHS compliant DISCONTINUED (9) FEATURES Pole 6A slim relay with #7 Tab terminal Nominal Power: 3 mw (3% power reduction compared to VR Series) Cadmium free contacts Insulation distance: 9.mm, Dielectric strength: K VAC Surge voltage K VAC JB: Tab terminal and contact terminal are connected electrically JC: Tab terminal and contact terminal are not connected electrically UL Class B (3 C), Flamability 9V- SAFETY STANDARDS UL, CSA, VDE RoHS compliant since date code: 3R Please see page 3 for more information APPLICATIONS Mircrowave oven magnetron, and heater ORDERING INFORMATION FTR-JR J B W ** [Eample] (a) (b) (c) (d) (e) (f) ( a) Series Name ( b) Contact Arrangement J : Tab termina l (#7) ( c) Coil Type ( d) Coil Nominal Voltage ( e) Contact Material ( f) Custom Designation B : 3 mw (TAB and PCB terminals connected) C : 3mW (TAB and PCB terminals unconnected) : : : W : Silver alloy Special Number Note: The designation name is stamped on the top of the relay case as follows: (Eample: Designation ordered: FTR-JRJBW Stamp: JRJBW 3
2 COIL DATA CHART MODEL FTR-JRJ( )W FTR-JRJ( )W FTR-JRJ( )W Nominal Voltage Coil (± %) Must Voltage Must Voltage Nominal Power 7 W mw 6 W mw, W.. 3 mw Note: All values in the table are measured at C. SPECIFICATIONS Item Contact Arrangement Material (initial) Rating (resistive) Maimum Carrying Current Maimum Switching Rating Maimum Switching Voltage Maimum Switching Current DISCONTINUED (9) Form A (SPST-NO) Silver alloy M aimum m ohm (at A 6) 77VAC 6 A A,3VA VAC A Maimum Switching Load C oil Nominal Power (at C ) *, m A 3mW Power (at C) 3mW O perating Temperature - C to + C (no frost) T ime Value O perate Time (at nominal voltage ) Maimum ms (ecluding bounce time) R elease Time (at nominal voltage) Maimum ms (ecluding bounce time) Life Other 7 Mechanical operations minimum Electrical Vibration Contact Ratin g operations minimum M isoperation - Hz (double amplitude of.6mm) E ndurance - Hz (double amplitude of.mm ) Shock Weight Misoperation Endurance m/ s (±ms),m/ s (6±ms) Approimately g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and epected reliability levels. 3
3 INSULATION Item FTR-JR Note (initial) Minimum, MΩ at Dielectric Strength open contacts coil and contacts, VAC (/6 Hz) min., VAC (/6 Hz) min. DISCONTINUED (9) Surge Voltage (coil and contact), V. µs standard wave SAFETY STANDARDS Type Compliance Contact rating UL UL E363 CSA C. No. LR3 VDE 3, 63, 7, 6 Complies with CQC Flammability: UL 9-V (plastics) A, VAC (resistive) 6A, 77VAC (resistive) 36
4 CHARACTERISTIC DATA Timing Coil Temperature Rise Operating Range. Timing (ms) Coil Power (W).. Temperature rise (deg.) A 6A 6 A...6. Coil Power (W).. Nominal Voltage Multiplying Factor A 6A Must Voltage (Hot Coil) Must Voltage (Cool Coil) 6 Ambient Temperature (C o ) Maimum Switching Power AC Resistive Contact Current (A)... Contact Voltage (V) DISCONTINUED (9) REFERENCE DATA Voltage (V) Contact (m ) Distribution (%) Distribution of and Voltage Distribution of and Time Distribution of Contact FTR-JRJBW FTR-JRJBW 9 FTR-JRJBW n= 9 n= 9 n= Nominal Voltage Multiplying Factor (%) Mechanical Life Test 6 FTR-JRJBW n= 3 operation/min.. Initial Operation ( ) Ω Voltge (V) Contact (m Ω ) Distribution (%) Initial Operation ( ) Distribution (%) Time (ms) Contact (m Ω) Electrical Life Test Electrical Life Test FTR-JRJBW operation/min. V (High voltage Trans n= FTR-JRJBW operation/min. load for Magnetron Oscillation) n= 77VAC,6A resistive (Nominal Current. Arms 6 with phase control) 6 Voltge (V) Contact (m Ω ). Initial Operation ( ) 37
5 DIMENSIONS Dimensions FTR-JB type Schematics (TOP VIEW) PC board mounting hole layout (BOTTOM VIEW) (6.) COM NO #7 (.) NO COM 3 (.). O. 3.. O. (.) 3... (.).. Dimensions FTR-JC type Schematics (TOP VIEW) PC board mounting hole layout (BOTTOM VIEW). (.) 6.7. #7.7 O. (.) (.) COM NO 6 3 DISCONTINUED (9) (3.) (.) 6.. -O -Ø. (.) 3. (3.) Unit: mm 3
6 NOTES DISCONTINUED (9) 39
1 POLE 5,10 A (CADMIUM FREE CONTACTS TYPE) FTR-F2 /H2 SERIES
POWER RELAY POLE, A (CADMIUM FREE CONTACTS TYPE) FTR-F /H SERIES RoHS compliant Features HIGH DENSITY MOUNTING Saves space by % compared to FTR-H type. HIGH ISOLATION Insulation Distance: Minimum mm between
DISCONTINUED (2008) 4 Pole (2 FORM C+ 2 FORM A) Signal Relay for Central Switching/ Data Transmission FTR-B2 SERIES. RoHS compliant FEATURES
4 Pole ( FORM C+ FORM A) Signal Relay for Central Switching/ Data Transmission FTR-B SERIES RoHS compliant FEATURES DISCONTINUED (8) 4 POLE MINIATURE RELAY Mounting space of 17mm with 4 pole relay, suitable
1 POLE - 16A LOW PROFILE TYPE FTR-K1 Series
POWER RELAY FTR-K1 SERIES 1 POLE - 16A LOW PROFILE TYPE FTR-K1 Series RoHS compliant FEATURES Low profile (height: 15.7mm) HIGH ISOLATION5 Insulation Distance (between coil and contacts: 10mm min.) Dielectric
2 POLES 8 A LOW PROFILE TYPE
POWER RELAY 2 POLES 8 A LOW PROFILE TYPE FTR-F1 R SERIES RoHS compliant FEATURES DPST/DPDT 8A Low profile power relay (height 16. mm) employing unique construction Higher isolation by employing reinforced
VE 12 H M S E K HV VD (a) ( * ) (b) (c) (d) (e) (f) (g) (h) (i)
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) VE SERIES Lead Free FEATURES UL, CSA, VDE recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in small package
1 POLE 5,10, 16 A (TV-5 rated Cadmium free type) FTR-F2 / H2 / K2 Series
POWER RELAY POLE,, A (TV- rated Cadmium free type) FTR-F / H / K Series RoHS RoHS compliant compliant Features HIGH DENSITY MOUNTING mm height and 7mm mounting space HIGH ISOLATION Insulation Distance:
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) Lead Free FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile
2 POLE 5A/TV-3 RATED COMPACT TYPE
POWER RELY POLE /TV-3 RTED COMPCT TYPE FTR-F Series RoHS compliant FETURES Small high density type relay mm save % compared to VB UL/CS/VDE/SEMKO/CQC approved Insulation distance: minimum mm between coil
POWER RELAY. FTR-K3-WG Series. 1 POLE - 25A - 1.5mm contact gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 25A - 1.5mm contact gap FTR-K3-WG Series FEATURES 1 pole, 25A 1 Form A Contact gap 1.5mm Surge strength (B/T open contacts) 2.5kV Compliance with European photovoltaic
POWER RELAY. FTR-K3-WS Series. 1 POLE - High Capacity 25A Type FTR-K1 SERIES FEATURES
POWER RELAY 1 POLE - High Capacity 25A Type FTR-K3-WS Series FEATURES 1 pole, 25A 1 form A contact Wide contact gap: 1.8mm Dielectric strength (B/T open contacts) 2.5kV Compliant with European photovoltaic
VF SERIES 1 POLE 20, 25, 30 A POWER RELAY (HEAVY POWER CONTROL) VF SERIES. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 20, 25, 30 A (HEAVY POWER CONTROL) VF SERIES RoHS compliant FEATURES UL, CSA, VDE recognized TV-15 rated 1 Form A (SPST-NO) contact Heavy duty 20 to 30 A small power relay High inrush
2 POLES 5 A LOW PROFILE TYPE
POWER RELAY POLES A LOW PROFILE TYPE FTR-F1 SERIES FEATURES Low profile power relay (height 1. mm) employing unique construction DPST/DPDT A, TV-3 rating available Higher isolation by employing reinforced
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES Lead Free / RoHS compliant* FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL
2 POLES 5 A LOW PROFILE TYPE
POWER RELAY POLES A LOW PROFILE TYPE FTR-F1 SERIES RoHS compliant FEATURES Low profile power relay (height 16. mm) employing unique construction DPST/DPDT A, TV-3 rating available Higher isolation by employing
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) JS SERIES FEATURES Lead Free / RoHS compliant* UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (10 C) insulation 1 form A (SPST-NO) or 1 form
To be Discontinued FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES RoHS compliant FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL pitch terminals
MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay
1a 16A power relay for micro wave oven
VDE 1a power relay for micro wave oven LE RELAYS (ALE) RoHS compliant FEATURES 1. Supports magnetron and heater loads. Capable for switching magnetron and heater loads found in microwave ovens. 2. Excellent
SPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements
DISCONTINUED (1998) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR244 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY POLES to A (FOR SIGNAL SWITCHING) FBR44 SERIES FEATURES Gold-overlay bifurcated contact Contact material and shape especially suitable for signal switching; assures reliability at low level
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) RoHS compliant FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N
![TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N](/thumbs/84/91187989.jpg "TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N")
TEL:-3349 FAX:-332E-MAIL: szss@3.com FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FBR2 SERIES FEATURES (FOR SIGNAL APPLICATIONS)
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. POWER RELAY 1 POLE 3,, 1 A FBR16 SERIES FEATURES Compact with high power (3
POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)
![POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)](/thumbs/82/85798757.jpg "POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)")
FTR-K SERIES POWER RELAY POLE - 0A Relay Type FTR-H Series FEATURES High density mounting Saves space by 6% compared to FTR-H type High insulation Insulation distance: minimum 6mm between coil and contact
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
FBR46 SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. High surge
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) VSB SERIES FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
PCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
FBR211 SERIES 1 POLE MINIATURE RELAY. 1 to 2 A (FOR SIGNAL SWITCHING) 1 to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS)
MINIATURE RELAY POLE FBR2 SERIES to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS) 2 A maximum carrying current Capable of 2 A maximum continuous carrying
NA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS Compliant FEATURES Slim type relay for high density mounting Conforms to Bellcore specification and FCC Part 68 Dielectric strength 1,500 VAC
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
SY SERIES 1 POLE 1 A (FOR SIGNAL SWITCHING) MINIATURE RELAY SY SERIES. RoHS compliant
MINIATURE RELAY 1 POLE 1 A (FOR SIGNAL SWITCHING) SY SERIES RoHS compliant FEATURES Very small size and light weight UL, CSA recognized Conforms to FCC rules and regulations part 68 Dielectric strength
Features. Insulation system F 835-1A-F-C 835-1A-F-S L-1A-C 835L-1A-S F 835L-1A-F-C 835L-1A-F-S NL-1A-C 835NL-1A-S
Type List Terminal style PCB terminal L PCB terminal NL PCB terminal Contact form 1A (SPNO) 1A (SPNO) 1A (SPNO) Insulation system Features Miniature 12A 12VAC, A 20VAC/30VDC PCB Relay. UL/CUL, CSA, TUV,
DISCONTINUED (2002) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES FEATURES Super miniature size: 0.2 inch 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom
FTR-B4 Series ULTRA MINIATURE RELAY SLIM SIGNAL RELAY. RoHS Compliant FEATURES ORDERING INFORMATION
ULTRA MINIATURE RELAY SLIM SIGNAL RELAY Series FEATURES Ultra miniature slim type relay for surface mounting Height: 9. mm maximum (THT) mm maximum (SMT) Weight: Approximately. g UL/CSA recognized Conforms
ultra MINIature 2-POLes 2a (LOW PrOFILe signal relay) Ftr-B3 series rohs compliant Features
ULTRA MINIATURE -POLES A (LOW PROFILE SIGNAL RELAY) FTR-B3 SERIES RoHS compliant Features DPDT C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight:.85g, Mounting
PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)
![PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)](/thumbs/83/88064178.jpg "PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)")
POWER RELAY 1 POLE - 16A/12A/10A Transparent cover FTR-K1 Series FEATURES 16A, 12A, 10A versions Transparent cover Low profile (height: 15.7mm) High insulation Insulation distance (between coil and contacts):
16A POWER RELAY FOR MICRO WAVE OVEN
VDE 6A POWER RELAY FOR MICRO WAVE OVEN LE RELAYS (ALE) TMP type New FEATURES. Price competitive having better price competitiveness (New 4 mw only) 2. Supports magnetron and heater loads. Switching possible
MINIATURE RELAY 2 POLES, 2A HIGH INSULATION/WIDE GAP FTR-C1 Series
MINIATURE RELAY 2 POLES, 2A HIGH INSULATION/WIDE GAP FTR-C1 Series RoHS compliant Features 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,00V between open contacts,000v between coil
2 POLE 5A/TV-3 RATED COMPACT TYPE
POWER RELY POLE /TV-3 RTED COMPCT TYPE FTR-F Series RoHS compliant FETURES Small high density type relay mm save % compared to VB UL/CS TV-3 rating Insulation distance: minimum mm between coil and contacts
1a/1c 5A/10A small power relays
VDE a/c A/A small power relays RELAYS Compliance with RoHS Directive FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw (c) High surge voltage:,
Classification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard. SPST-NO (1a) Fully sealed PCB terminal
SPST Slim Power Relay for A switching Slim -mm width and miniature size. (20.08 12. mm) High switching capability A (20 VAC and VDC), and high contact reliability by crossbar-twin contact. Low power consumption
1 POLE - 1 to 2A (For Signal Switching)
MINIATURE RELAY 1 POLE - 1 to A (For Signal Switching) SY Series FEATURES Very small size and light weight UL, CSA recognized Conforms to FCC rules and regulations part 68 Dielectric strength 00 VAC between
2-POLES 2A (SLIM PROFILE SIGNAL RELAY) FTR-B4 Series
maluska elektronik ULTRA MINIATURE -POLES A (SLIM PROFILE SIGNAL RELAY) FTR-B Series RoHS compliant Features DPDT A Ihr Partner für Kontakt-Bauelemente Ultra miniature slim type relay for surface mounting
HIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY
VDE JQ HIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY JQ RELAYS.77.39.. mm inch FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw () High
EN GWT compliant Low profile: 15.7mm.618inch height 1a/1c 16A power relay
EN6033-1 GWT compliant Low profile: 1.7mm inch height 1a/1c 16A power relay LZ-N RELAYS (ALZN) Protective construction: Flux-resistant type New 12. 28.8.492 RoHS compliant 1.7 (Unit: mm inch) FEATURES
G5NB. A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kv Impulse Withstand Voltage. Application Examples. Model Number Legend
PC Power Relay A Miniature Relay with -pole A/5A Switching Capability and 0 kv Impulse Withstand Voltage Highly efficient magnetic circuit for high sensitivity (200 mw). Small, yet provides 0-kV impulse
10 A MINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A 1 Form A. Initial breakdown voltage* 2. Vibration resistance.
VDE A MINIATURE POWER RELAY RELAYS a..9.9 SPECIFICATIONS power FEATURES.9 ab.9 Contact, Arrangement Form A Form A Form B Initial contact resistance, ma. (By drop V DC A) mω Contact material Gold flash
PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.
G5Q. Ordering Information. Specifications. PCB Relay. Compact, High Isolation Relay J COIL RATINGS. 638 PCB Relay G5Q
PCB Relay G5Q Compact, High Isolation Relay D Compact single pole relay with high isolation between coil and contacts. D Up to 10 A switching on the NO contacts. D Ensures a withstand impulse voltage of
Classification Enclosure rating Contact form Model Standard Flux protection SPST-NO G6RL-1A
PCB Relay Low-profile power relay with maximum switching of 8 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm. RoHS
Compliant with European standards 1a/1c 6A Slim power relays
PF (APF) VDE Compliant with European standards 1a/1c 6A Slim power relays PF RELAYS (APF) RoHS compliant FEATURES 1. High density mounting with mm.197 inch width Space saved with mm.197 inch slim type
Load for air conditioner 1a 20A power relays
VDE Load for air conditioner 1a A power relays LF RELAYS (ALF) TMP type PCB type RoHS compliant FEATURES 1. Ideal for compressor and inverter loads 1) Compressor load: A 5V AC ) Inverter load: A V AC,
8 A MINIATURE POWER RELAY IN DS RELAY SERIES
DSP A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS DSPa.. DSPa.. DSP.. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Power types added to DS relay series High switching
Ordering Information. PCB Relay G6RL. Model Number Legend: Low-profile power relay with maximum switching of 10 A
PCB Relay G6RL Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) IEC 60947-5-1, AC-15, DC13 Clearance and creepage distance: 10
MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
Classification Contact form Contact type Contact material Enclosure Rating Model Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2
Miniature Relay for Signal Circuits ROHS compliant. Wide switching power of 10 µa to 2 A. High dielectric strength coil-contacts:1,000 VAC; open contacts: 750 VAC. Conforms to FCC Part 68 requirements.
SPECIFICATIONS Contact Form 2 Form C Maximum switching power 30 W (resistive) 62.5 VA (resistive) Contact Ratings Maximum switching voltage 220
EMAIL: The new EF2 Series miniature signal relays are designed for use in electronic switching systems, PBXs, terminal equipment, telephone equipment and instrument equipment. This series exhibits 50 mw
PCB relay for DC voltage, polarized, monostable or bistable
V23042 PCB relay for DC voltage, polarized, monostable or bistable Features Universally applicable in the most varied circuit functions in the field of telecommunications and small signal technology Versatile
CP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES
High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE Sealed 13.1 14.1 9..374 FEATURES Maximum carrying current of 3 A (4 mw type, 1 V applied)
PCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Fully sealed construction. Unique moving
8 A MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES
A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS FEATURES DSPa.. DSPa DSP.... Power types added to DS relay series High switching capacity: a: A V AC / ab, a: A V AC High sensitivity: mw pick-up power
Song Chuan / Relay Catalog 507
07 eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. 2A 277VAC DPDT. Low profile.7 and high insulation system class High CTI material &
MINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A. 1 Form B. Initial breakdown voltage* 2 8 A 250 V AC 8 A 30 V DC 250 V AC, 30 V DC
VDE MINIATURE POWER RELAY DKRELAYS a..9.9 ab.9.9 FEATURES Large capacity in small size: A V AC (a) High sensitivity: mw nominal power High breakdown, Vrms between contacts and coil, Vrms between open contacts
G5LE. Ordering Information. PCB Relay. A Cubic, Single-pole 10-A Power Relay J MODEL NUMBER LEGEND G5LE PCB Relay G5LE
PCB Relay GLE A Cubic, Single-pole 0-A Power Relay D Subminiature sugar cube relay. D Contact ratings of 0 A. D Withstands impulses of up to 4,00 V. D Two types of seal available: flux protection and plastic-sealed.
SPST-NO SPDT DPST-NO DPDT
PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0
Features. Designation (provided with) style. Contact. Insulation. system. gap. 110A-1AH-F-C 110BA-1AH-F-C 110A-1AH1-F-C 110BA-1AH1-F-C High power type
0 eatures High duty sugar cube relay with 6A 77VAC, A 77VAC. Contact gap can be greater than.mm,.mm. Conforms to European photovoltaic standard IEC 609-. Coil holding can be reduced to 6%, %V of the nominal
Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).
Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity
Classification Enclosure rating Contact form Contact material
PCB Relay Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm.
FTR-P1 SERIES 1 POLE 20 A QUIET POWER RELAY (FOR AUTOMOTIVE APPLICATIONS) FEATURES ORDERING INFORMATION
QUIET POWER RELAY POLE A (FOR AUTOMOTIVE APPLICATIONS) FTR-P SERIES FEATURES Original construction, where reduction of operational noise is considered when mounted on PCB, made it possible to design this
RU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
Type Sealing Poles Contacts Rated voltage Model Standard Flux-tight 4 poles 3PST-NO, SPST-NC 24 VDC G7SA-3A1B. Type LED indicator Poles Rated voltage
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
1a/1c/2a/2c/5A/10A power relays for power supply
a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant type/ ORDERING INFORMATION JW Contact arrangement : Form C a: Form A 2: 2 Form C 2a: 2 Form
1a 8A, 1a1b/2a 5A small polarized power relays
a A, ab/a A small polarized power DSP RELAYS Compliance with RoHS Directive FEATURES. Compact with high contact rating Even with small mm. inch (H) mm. inch (W) mm. inch (L) (dimensions, high capacity
Suitable for lighting and motor load, 1 Form A 50A latching relays
Suitable for lighting and motor load, 50A latching relays DJ-H RELAYS (ADJH) 9.0 5 1 0.2 9.0 5 New 1 FEATURES 1. High inrush capability Tungsten load (TV-20 class) Electronic ballast load (NEMA10) Capacitive
4. Classification E: High capacity. 3. Terminal Form Blank: Tab terminals (#250 terminals) Tab terminals #250 SPST-NO
New Product News G9EJ--E Compact Capable of Switching 4 V A DC loads Actualize a high capacity interruption through the function of extinction of magnetic arc by adopting high-efficiency magnetic circuit.
1a 8A, 1a1b/2a 5A small polarized power relays
Automation Controls Catalog a A, ab/a A small polarized power DSP RELAYS RoHS compliant Protective construction: Sealed type FEATURES. Compact with high contact rating Even with small mm. inch (H) mm.
MINIATURE LOW NOISE RELAY
MINIATURE LOW NOISE RELAY POLE - 5A (For V car battery) FTR-P7 Series FTR-K SERIES FEATURES Miniature size, form C Low noise (average acoustic noise level: 5dB, distance 5cm) High contact capacity (5A,
507-1A H - - C. Features. Type List. Ordering Information
Type List Standard type Teral style Contact form High rating iature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 77VAC SPDT. Low profile mm and high insulation system class.
G2RL-1A G2RL-1 G2RL-2A G2RL-2
9 PCB Relay High Capacity, Low Profile Relay Low profile:.7 mm max. in height Cadmium-free contacts ensuring environment-friendly use 0 kv impulse surge withstand Clearance and creepage distance: 0 mm/0
1a/1c/2a/2c/5A/10A power relays for power supply
Automation Controls Catalog VDE a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant /Sealed ORDERING INFORMATION Contact arrangement : Form C a:
Classification Terminal Shape Contact form Enclosure rating Model Rated coil voltage
ow-profile Relay with Various Models ow profile:.7 mm in height. Creepage distance 8mm between coil and contacts 0 kv Impulse withstand voltage Models with AC coil available. High-Inrush model available
MY-GS. Miniature Power Relays. Mechanical Indicators Added as a Standard Feature to Our Bestselling MY General-purpose Relays.
Miniature Power Relays CSM DS_E_1_1 Mechanical Indicators Added as a Standard Feature to Our Bestselling MY General-purpose Relays Relays with AC and DC coils have different colors of operating indicators
G6C. Miniature High Capacity Relays with SPST-NO 10A and SPST-NO + SPST-NC 8A. Model Number Legend. Application Examples.
Miniature High Capacity Relays with SPST-NO 0A and SPST-NO + SPST-NC A SPST-NO 0A and SPST-NO + SPST-NC A for power switching and output that satisfy the needs for space-saving. Small High-capacity Relays
Miniature Power Relay MSR
V23061 PCB relay for DC voltage, neutral, monostable Features Used as a switching element for electrical separation between low-power control circuits and power load circuits With 8 mm clearance and creepage
CONVENTIONAL TYPE REED RELAY EDR0 SERIES
CONVENTIONAL TYPE REED RELAY EDR0 SERIES EDR001 EDR002 EDR003 EDR007 EDR009 EDR010 EDR011 EDR012 EDR013 EDR015 EDR016 EDR018 1 FEATURES EDR0 01, 02, 03, 07, 09, 10, 11, 12, 13, 15, 16 SERIES 2.54 mm IC
Type Sealing Poles Contacts Rated voltage Model 5PST-NO, SPST-NC 24 VDC *1
Slim Relays with Forcibly Guided Contacts Conforming to EN Standards EN50205 Class A, approved by VDE. Ideal for use in safety circuits in production machinery. Four-pole and six-pole Relays are available.
COMPACT POWER RELAY 1 POLE 25 A FOR AUTOMOTIVE APPLICATIONS
COMPACT POWER RELAY POLE 5 A FOR AUTOMOTIVE APPLICATIONS FTR-P3 Series FEATURES Compact for high density packaging. (65% volume of previous generation FBR 5/5 Series). High contact capacity with proven
Compact size 2 Form A and 2 Form A 1 Form B 35A power relays for energy management and industrial equipment. Conditions. Mirror contact mechanisms
Compact size and 3A power relays for energy management and industrial equipment HE-S RELAYS New TYPICAL APPLICATIONS Photovoltaic power generation systems (Solar inverter) Uninterruptible Power Supplies
Relay Types. Reed V23100-V4 Relay. Typical applications. Features. DIP version (flat) DIP version (high) SIL version.
1 and 2 pole relays non-polarized, non-latching ROHS compliant (Directive 2002/95/EC) as per product date code 0501. Features Direct coil control with TTL-signals possible Highly reliable switching High
COMPACT POWER TWIN RELAY. 1 POLE x 2 30A (Dual relay) (FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER TWIN RELAY POLE x 2 3A (Dual relay) (FOR AUTOMOTIVE APPLICATIONS) FBR2, 22 SERIES FEATURES DISCONTINUED (2) Two independent relays mounted in a single package Miniature size (4% of the volume
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY K-RELAYS.0 a UL File No.: E3 CSA File No.: LR2550.0.8 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical
FRL-274 SERIES 1 POLE 12, 30, 40 A HIGH POWER RELAY (FOR AUTOMOTIVE APPLICATIONS) FEATURES ORDERING INFORMATION
HIGH POWER RELY POLE 2, 30, 40 (FOR UTOMOTIVE PPLICTIONS) FETURES High current switching and carry by using new conductive materials. Suitable for automotive applications such as BS, power assisted steering,etc.
Transistor drive 2c/4c 5A slim power relays
Transistor drive 2c/4c 5A slim power relays RELAYS 4 Flat type () 4 () 2 Flat type () 2 () FEATURES. Compact, slim design Use of high-performance flat electromagnetic design achieves 0.9 mm.429 inch profile,
A rated contacts Flange mount/faston 250 (6.3 x 0.8 mm) connection
65 Power relays 20-30 65 20 Power relays 1 NO + 1 NC (SPST-NO + SPST-NC) 65.31 Flange mount Faston 250 connections 65.61 PCB mount C coils & DC coils Cadmium Free option available 65.31 65.61 20 rated
RF Signal Relays AXICOM. HF3 Relay
HF3 Relay n Y-Design n Frequency range DC to 3GHz n Impedance 50Ω or 75Ω n Small dimensions (14.6x7.2x10mm) n 1 form C contact (1 changeover contact) n Immersion cleanable n Low power consumption ( 140mW)
Safety Monitoring Relays
Safety Monitoring Relays Contents Selection Guide I-2 Safety Monitoring Relays G9SA I-6 SR0A I-2 SR03AM I-3 SR04P I-7 SR05E I-7 SR06ED I-2 SR08AD & SR09AD I-8 SR20MP I-2 SR25SMS45 I-22 SR3A I-25 SR20A
G8P. PCB Power Relay. Model Number Legend. Application Examples. Ordering Information
CB ower Relay Up to 30 A switching capacity in compact package. 2.0 mm cantact gap type available (-1A4-B) Available with quick-connect contact terminals for easy load connecting with either QC or CB coil
Compact Flat Size Relay for Automotive. (Unit: mm inch)
Compact Flat Size Relay for Automotive CP RELAYS Sealed 13.1.1 9..374 13.1.1 1..413 FEATURES Compact flat type PC board terminal type: 9. mm.374 inch Compact and High