FTR-P1 SERIES 1 POLE 20 A QUIET POWER RELAY (FOR AUTOMOTIVE APPLICATIONS) FEATURES ORDERING INFORMATION

Size: px

Start display at page:

Download "FTR-P1 SERIES 1 POLE 20 A QUIET POWER RELAY (FOR AUTOMOTIVE APPLICATIONS) FEATURES ORDERING INFORMATION"

Alice Garrett
6 years ago
Views:

QUIET POWER RELAY POLE A (FOR AUTOMOTIVE APPLICATIONS) FTR-P SERIES FEATURES Original construction, where reduction of operational noise is considered when mounted on PCB, made it possible to design

1 QUIET POWER RELAY POLE A (FOR AUTOMOTIVE APPLICATIONS) FTR-P SERIES FEATURES Original construction, where reduction of operational noise is considered when mounted on PCB, made it possible to design this quiet relay. (Average acoustic noise level: 3 db, distance cm) New types of materials are used for the conductive parts, allowing this compact relay to carry AMP. Two types of contact material are available for various contact loads. Wider contact gap (.6 mm) version is also available for enhanced cut-off ability to overload condition. ORDERING INFORMATION FTR-P C N 2 N - [Example] ** (a) (b) (c) (d) (e) (f ) (a) Series Name FTR-P: FTR-P Relay (b) Contact Arrangement C : form C (SPDT) (c) Contact Gap N :.3 mm gap P :.6 mm gap (d) Nominal Voltage 9 : 9 VDC : VDC 2 : 2 VDC (e) Contact Material N : Silver-copper-nickel W : Silver-tin oxide-indium (f) Custom Designation To be assigned for custom specification Note: Part No. is printed on the top of relay as follows. (Example) Designation ordered: FTR-PCN2N Stamp: PCN2N

2 FTR-P SERIES (QUIET TYPE) SPECIFICATIONS Item Contact Arrangement form C (SPDT) Material Voltage Drop () Ratings Maximum Carrying Current Maximum Inrush Current (reference) Max. Switching Current (reference) Min. Switching Load* (reference) Silver-copper-nickel alloy (N type) Silver-tin oxide-indium (W type) Maximum mv (at 2 A 2 VDC) Specifications 4 VDC/ A (locked motor load) 4 VDC/inrush A, break 4 A (motor free load) A/ hour (2 C, % rated coil ) N Type: A W Type: 6 A 3 A at 6 VDC 6 VDC A Coil Operating Temperature Range C to +8 C (no frost) (reter to the CHARACTERISTIC DATA) Storage Temperature Range C to + C (no frost) Time Value Operate (at nominal ) Maximum ms Release (at nominal ) Maximum ms Life Mechanical 7 operations minimum Electrical 2 operations minimum (locked motor load) 4 operations minimum (motor free load) Other Vibration Resistance to Hz (double amplitude of. mm) Shock Misoperation m/s 2 Resistance Endurance, m/s 2 Weight Approximately. g * Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum applicable load varies with the switching frequency and operating environment. COIL DATA CHART.3 mm contact gap type MODEL Coil Must Nominal Must operate release N TYPE W TYPE (±%) Thermal FTR-PCN9N FTR-PCN9W 9 VDC 3 Ω FTR-PCNN FTR-PCNW VDC 8 Ω FTR-PCN2N FTR-PCN2W 2 VDC 2 Ω.4 V (at C) 6.8 V (at 8 C) 6.3 V (at C) 7.9 V (at 8 C) 7.3 V (at C) 9.2 V (at 8 C).7 V.8 V 73 C/W.9 V 2

3 FTR-P SERIES (QUIET TYPE).6 mm Contact Gap Type MODEL Coil Must Nominal Must operate release N TYPE W TYPE (±%) Thermal FTR-PCP9N FTR-PCP9W 9 VDC Ω FTR-PCPN FTR-PCPW VDC 3 Ω FTR-PCP2N FTR-PCP2W 2 VDC 8 Ω.4 V (at C) 6.8 V (at 8 C) 6.3 V (at C) 7.9 V (at 8 C) 7.3 V (at C) 9.2 V (at 8 C).7 V.8 V 6 C/W.9 V Note: Values in the table of coil and must release are measured at C. SUITABLE APPLICATION CONTACT MATERIAL N: Silver-copper-nickel Intermittent wiper SUITABLE LOAD W: Silver-tin oxide-indium Door lock Power window Solenoids, etc. (locked rotor) CHARACTERISTIC DATA. MAXIMUM BREAK CAPACITY 2. LIFE 4 VDC Motor locked load Contact switching current (A) Locked motor load.3 mm gap.6 mm gap 2 Resistive load.3 mm gap.6 mm gap Number of operations (x 4 ) Voltage between contacts (V) Locked motor current (A) 3

4 FTR-P SERIES (QUIET TYPE) 3. LIFE TEST (EXAMPLE) Test item 4 V DC- A Motor Lock, operations minimum Test circuit RL- RL-2 M Shift of pick-up drop-out Percent of rated coil (%) 8 6 PICK-UP DROP-OUT Shift of contact Current wave form (RL-) A A (RL-2) A A.3 sec sec sec.3 sec Contact Resistance (mω) Break Make (Measured at 6 V- A) Test item 4 V DC- A motor free, operations minimum Test circuit M Shift of pick-up drop-out Percent of rated coil (%) 8 6 PICK-UP DROP-OUT Number of operations (x 4 ) Shift of contact Current wave form A A 4 A 6 A Contact Resistance (mω) Break Make (Measured at 6 V- A) Number of operations (x 4 ) 4

5 FTR-P SERIES (QUIET TYPE) 4. COIL TEMPERATURE RISE. OPERATING COIL VOLTAGE RANGE (EXAMPLE) (V) CONTINUOUSLY 8 (2) carrying current : APPLICABLE COIL applied coil power A VOLTAGE RANGE.8 W 6.6 W.8 W.6 W () carrying current : applied coil power A at C 3 Operating temperature ( C) 3 Applied time (minutes) 6. VIBRATION RESISTANCE CHARACTERISTICS Dual amplitude (mm) (m/s Frequency : ~ Hz Acceleration : m/s 2 maximum Vibration direction : see diagram Detection level : chatter of µs minimumæ 2 )... Automotive electronic standard 44 m/s 2 Range where chattering occurs Coil temperature rise ( C) Acceleration Applied to the coil contact coil not energized on Z-direction Z FTR-P Frequency (Hz) Y X 7. SHOCK RESISTANCE CHARACTERISTICS (m/s 2 ), Shock level 8 6 X X2 Y Y2 Z Z2 Shock direction : contact (coil de-energized) : contact (coil energized) Shock application time : ms, half-sine wave Test material : coil, energized and de-energized Shock direction: see diagram Detection level : chatter of µs minimum Z2 Z Y2 FTR-P Y X2 X

6 FTR-P SERIES (QUIET TYPE) Distribution (%) REFERENCE DATA Distribution of operate and release 8 6 FTR-P n = Operate Release Distribution (%) Distribution of operate and release time FTR-P n = 8 Operate Release 6 Distribution (%) Distribution of contact FTR-P n = Nominal multiplying factor (%) DIMENSIONS Dimensions Time (ms) PCP2W F.T Contact (mω) (2.3) (2.4) 2. Mounting hole layout (BOTTOM VIEW) Schematic (BOTTOM VIEW) ø COM Tolerance ±. Unit : mm 6

7 FTR-P SERIES (QUIET TYPE) Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (8-3) Fax: (8-3) Web: North and South America Fujitsu Components America, Inc. 2 E. Caribbean Drive Sunnyvale, CA 989 U.S.A. Tel: (-8) Fax: (-8) marcom@fcai.fujitsu.com Web: Europe Fujitsu Components Europe B.V. Diamantlaan WV Hoofddorp Netherlands Tel: (3-23) 69 Fax: (3-23) 69 info@fceu.fujitsu.com Web: Asia Pacific Fujitsu Components Asia Ltd. 2E Pasir Panjang Road #4- Citilink Warehouse Complex Singapore 829 Tel: (6) Fax: (6) fcal@fcal.fujitsu.com 2 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 3/2 7

(FOR AUTOMOTIVE APPLICATIONS)

COMPACT POWER RELAY POLE 2 A (FOR AUTOMOTIVE APPLICATIONS) FBR, 2 SERIES FEATURES Compact and lightweight structure (42% of the volume of the FBR relay) High current contact capacity (carrying current: