Classification Terminal Shape Contact form Enclosure rating Model Rated coil voltage

Size: px

Start display at page:

Download "Classification Terminal Shape Contact form Enclosure rating Model Rated coil voltage"

Lester Park
5 years ago
Views:

1 ow-profile Relay with Various Models ow profile:.7 mm in height. Creepage distance 8mm between coil and contacts 0 kv Impulse withstand voltage Models with AC coil available. High-Inrush model available (Inrush peak currents up to 00 A) ow Noise models available (Approx. 0 to db less sound pressure than standard -Series Relays) TV8 Rating models available (TV8 for U standard) RoHS Compliant Model Number egend Application Examples -@@-@-@ Number of poles : -pole 3. Classification None: Standard E : Housing equipments Audio-visual products Office automation machines Air-conditioners ighting 2. Contact Form None: SPDT (c) A : SPST-NO (a) 4. Additional Models None: Standard HR: High-inrush N: ow Noise TV8: TV8 rating Ordering Information Classification Terminal Shape Contact form Enclosure rating Model Rated coil voltage Standard -A-N VDC, 2VDC, 24VDC SPST-NO (a) -A-E-HR VDC, 2VDC, 24VDC, 48VDC -A-E-N VDC, 2VDC, 24VDC PCB terminals Flux protection -A-E-TV8 VDC, 2VDC, 24VDC, 48VDC 24VAC, 00VAC, VAC/VAC, --E SPDT (c) 0VAC, 230VAC/240VAC --E-HR VDC, 2VDC, 24VDC, 48VDC Note. When ordering, add the rated coil voltage to the model number. Example: -A-N DC Rated coil voltage However, the notation of the coil voltage on the product case as well as on the packing will be marked VDC. Minimum packing unit 00 pcs/tray Ratings Coil ow Noise Models: -A(-E)-N Rated Voltage (VDC) Coil resistance (Ω) ,086 Must operate voltage Must release voltage % of rated voltage Note. The rated current and resistance are measured at a coil temperature of 23 C with a tolerance of ±0%. Max voltage Power consumption (mw) 70% max. 0% min. 0% Approx. 30

2 High-Inrush Models: -(A)-E-HR, -A-E-TV8 Rated Voltage (VDC) Note. The rated current and resistance are measured at a coil temperature of 23 C with a tolerance of ±0%. Models with AC Coil: --E Coil resistance (Ω) ,440 Must operate voltage Must release voltage % of rated voltage Max. voltage 70% max. 0% min. 30% Power consumption (mw) Approx ,38 Approx. 430 Rated Voltage (VAC) at 0Hz Note. The rated current tolerance is +%/-%. All above data is based on coil temperature of 23 C. 2. Coil resistances are provided as reference values. Contacts ow Noise Models: -A(-E)-N High-Inrush Models: -(A)-E-HR, -A-E-TV8 Models with AC Coil: --E at 60Hz Coil resistance (Ω) ,2 /.8/6.2.3/.70, , / / / ,600 Must operate voltage Must release voltage % of rated voltage Max. voltage Power consumption (mw) 7% max. % min. 0% Approx. 70 oad Resistive load Standard Contact form SPST-NO (a) Contact Type Single Contact material Ag Alloy Rated load 2 A at 20 VAC 6 A at 20 VAC 2 A at 24 VDC 6 A at 24 VDC Rated carry current 2 A 6 A Max. switching voltage 20 VAC, 24 VDC Max. switching current 2 A 6 A oad Resistive load Contact form SPST-NO (a) SPDT (c) Contact Type Single Contact material Ag Alloy Rated load 6 A at 20 VAC 6 A at 20 VAC, 24VDC (NO) 6 A at 24 VDC A at 20 VAC, 24 VDC (NC) Rated carry current 6 A 6 A (NO), A (NC) Max. switching voltage 20 VAC, 24 VDC Max. switching current 6 A 6 A (NO), A (NC) oad Contact form Contact Type Contact material Rated load Rated carry current Max. switching voltage Max. switching current Resistive load SPDT (c) Single Ag Alloy 6 A at 20 VAC, 24 VDC (NO) A at 20 VAC, 24 VDC (NC) 6 A (NO), A (NC) 20 VAC, 24 VDC 6 A (NO), A (NC) 2

3 Characteristics ow Noise Models: -A(-E)-N Item Classification Standard Contact resistance 00 mω max. Operate time ms max. Release time ms max. Insulation resistance,000 MΩ min. Dielectric strength Between coil and contacts 6,000 VAC, 0/60 Hz for min Between contacts of the same polarity,000 VAC, 0/60 Hz for min Impulse withstand voltage Between coil and contacts 0 kv (.2 0 μs) Insulation distance Between coil and contacts Clearance: 8 mm, Creepage: 8 mm Vibration resistance Destruction 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Malfunction 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Shock resistance Destruction,000 m/s 2 Malfunction 00 m/s 2 Durability Mechanical,000,000 operation min. (at 8,000 operations/hr) Electrical 0,000 operations min. (at,800 operations/hr) 0,000 operations min. (at,800 operations/hr) Failure rate (P level) (reference ) 00 ma at VDC Ambient operating temperature -40 to 8 C (with no icing or condensation) Ambient operating humidity % to 8% Weight Approx. 0 g Note. Values in the above table are initial values. 2. The contact resistance is measured with A applied at VDC using a fall-of-potential method. 3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 00 VDC. 4. The release time is value with a diode attached.. Failure rate (P level) was measured at a switching frequency of operations/min. High-Inrush Models: -(A)-E-HR, -A-E-TV8 Item Classification Contact resistance 00 mω max. Operate time ms max. Release time ms max. Insulation resistance,000 MΩ min. (at 00 VDC) Dielectric strength Between coil and contacts 6,000 VAC, 0/60 Hz for min Between contacts of the same polarity,000 VAC, 0/60 Hz for min Impulse withstand voltage Between coil and contacts 0 kv (.2 0 μs) Insulation distance Between coil and contacts Clearance: 8 mm, Creepage: 8 mm Vibration resistance Destruction 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Malfunction 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Shock resistance Destruction,000 m/s 2 Malfunction 00 m/s 2 Durability Mechanical 0,000,000 operation min. (at 8,000 operations/hr) Electrical 0,000 operations min. (at,800 operations/hr) Failure rate (P level) (reference ) 00 ma at VDC Ambient operating temperature -40 to 8 C (with no icing or condensation) Ambient operating humidity % to 8% Weight Approx. 0 g Note. Values in the above table are initial values. 2. The contact resistance is measured with A applied at VDC using voltage drop method. 3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 00 VDC. 4. The resistive load ratings for NO contact apply when there is no load on NC contact.. Failure rate (P level) was measured at a switching frequency of operations/min. Models with AC Coil: --E Item Classification Contact resistance 00 mω max. Operate time ms max. Release time ms max. Insulation resistance,000 MΩ min. (at 00 VDC) Dielectric strength Between coil and contacts 6,000 VAC, 0/60 Hz for min Between contacts of the same polarity,000 VAC, 0/60 Hz for min Impulse withstand voltage Between coil and contacts 0 kv (.2 0 μs) Insulation distance Between coil and contacts Clearance: 8 mm, Creepage: 8 mm Vibration resistance Destruction 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Malfunction 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Shock resistance Destruction,000 m/s 2 Malfunction 00 m/s 2 Durability Mechanical 0,000,000 operation min. (at 8,000 operations/hr) Electrical 0,000 operations min. (at 7 operations/hr) Failure rate (P level) (reference ) 40 ma at 24 VDC Ambient operating temperature -40 to 70 C (with no icing or condensation) Ambient operating humidity % to 8% Weight Approx. 0 g Note. Values in the above table are initial values. 2. The contact resistance is measured with A applied at VDC using voltage drop method. 3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 00 VDC. 4. The resistive load ratings for NO contact apply when there is no load on NC contact.. Failure rate (P level) was measured at a switching frequency of operations/min. 3

4 Engineering Data ow Noise Models: -A(-E)-N Maximum Switching Capacity Durability Switching current (A) A-E-N Durability (x0 4 operations) VAC resistive load -A-N Switching voltage Distribution of Sound Pressure. When Operating 2. When Releasing Quantity Quantity Switching current (A) Sample: -A-N 2 VDC Number of relays: 00 pcs Range:A weighted sound pressure level, Fast, Max. hold Device connected to coil: Diode Testing environment:room temperature and humidity Background noise: Approx. 30 db max. Relay cm 0 0 Sponge Microphone 0 ~36 ~38 ~40 ~42 ~44 ~46 ~48 ~0 ~2 ~4 ~6 0 ~36 ~38 ~40 ~42 ~44 ~46 ~48 ~0 ~2 ~4 ~6 Sound pressure (db) Sound pressure (db) 4

5 Dimensions -A-N Four,.3±0. dia. PCB Mounting Holes (Unit: mm) 29.0 max. (28.8)* 2.7 max. (2.)* 7.±0..7 max. (.)* (2.3) ±0. ±0. Terminal Arrangement/ Internal * Average value 3 4 (No coil polarity) -A-E-N -A-E-HR -A-E-TV8 Six,.3±0. dia. PCB Mounting Holes 29.0 max. (28.8)* 2.7 max. (2.)*.7 max. (.)* 7.±0. (2.3) ±0. ±0. Terminal Arrangement/ Internal * Average value (No coil polarity) --E --E-HR PCB Mounting Holes Eight,.3 ± 0. dia. ± 0. ± max. (28.8)* 2.7 max. (2.)*.7 max. (.)* 7. ± 0. (2.3) ± 0. Terminal Arrangement/ Internal * Average value (No coil polarity)

6 Approved Standards U Recognized (File No.E4643) and CSA Certified (File No. R3928) Model Contact form Coil ratings Contact ratings Number of test operations 2 A, 20 VAC Resistive, 40 C -A-N SPST-NO (a) to 24 VDC 2 A, 24 VDC Resistive, 40 C 00,000 TV-, VAC, 40 C 2,000 6 A, 20 VAC Resistive, 40 C -A-E-N SPST-NO (a) to 24 VDC 6 A, 24 VDC Resistive, 40 C 0,000 TV-, VAC, 40 C 2,000 6 A, 277 VAC eneral, 40 C 0,000 TV-8, VAC, 40 C 2,000 -A-E-TV8 SPST-NO(a) to 48 VDC A300 Pilot Duty, 7 VA, 240 VAC, 40 C 30,000 /2 Hp, VAC, 40 C 6, RA/0 FA, 20 VAC, 40 C 6,000 6 A, 277 VAC eneral, 40 C 0,000 -(A)-E-HR SPST-NO (a) to 48 VDC TV-, VAC, 40 C 2,000 A300 Pilot Duty, 7 VA, 240 VAC, 40 C 30,000 --E SPDT-NO (a) 24 to 240 VAC /2 Hp, VAC, 40 C 6,000 (--E) 60 RA/0 FA, 20 VAC, 40 C 6,000 to 48 VDC A, 20 VAC eneral, 40 C 0,000 SPDT-NC (b) 24 to 240 VAC (--E) A, 24 VDC Resistive, 40 C 0,000 VDE Certified (EN680-) (icense No ) Model Contact form Coil ratings Contact ratings Number of test operations -A-N SPST-NO (a), 2, 24VDC 2 A, 20 VAC cosφ=, 8 C 60,000 -A-E-N SPST-NO (a), 2, 24VDC 6 A, 20 VAC cosφ=, 8 C 30,000 6 A, 20 VAC cosφ=, 8 C,000 -A-E-TV8 SPST-NO (a), 2, 24, 48 VDC 240 VAC 00 A (0-P) Steady 0 A (rms), 8 C 0, VAC 0 A (0-P) Steady A (rms), 8 C 00,000 SPST-NO (a) 6 A, 20 VAC cosφ=, 8 C,000 -(A)-E-HR, 2, 24, 48 VDC 240 VAC 00 A (0-P) Steady 0 A (rms), 8 C 0,000 SPDT-NO (a) 240 VAC 0 A (0-P) Steady A (rms), 8 C 00,000 --E SPDT-NO (a) 24, 00, /, 0, 230/240 VAC (0 Hz) 6 A, 20 VAC cosφ =, 70 C,000 Creepage distance Clearance distance Insulation material group coil-contact circuit Type of insulation open contact circuit Rated Insulation voltage Pollution degree Rated voltage system Over voltage category Category of protection according to IEC 680- Tracking Index of relay base 8 mm min. 8 mm min. IIIa Reinforced Micro disconnection 20 V 3 (Flux protection) 20 V III RT II (Flux protection) PTI 20 V min. (housing parts) 6

7 Precautions Please refer to PCB Relays Common Precautions for correct use. Correct Use Mounting When mounting a -N Relay (Silent Relay) on a PCB, use a diode for surge absorption for the coil. Wiring of Models (-E) models (-E) have a structure that connects two terminals from one contact. When designing the circuit, use both terminals. If you use only one terminal, the Relay may be unable to satisfy specified performance. Others Do not decrease coil voltage after operation and do not use a pulse wave drive. Precautions for Correct Use This product is not suitable for vehicles such as automobiles (including two-wheeled vehicles). If the product is used in the following applications, consult your OMRON sales representative to check the necessary items according to the specification sheets.also make sure the product is used within the specified ratings and performance ranges with an ample margin and implement safety measures, such as designing a safety circuit, to minimize danger should the product fail. a. Outdoor use, uses involving potential chemical contamination or electrical interference. b. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, safety equipment, and equipment that could present a risk to human life or body. c. Equipment requiring a high level of reliability, such as gas, water, or electrical supply systems. Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: Cat. No. K32-E (0307)(O) 7

G5NB. A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kv Impulse Withstand Voltage. Application Examples. Model Number Legend

G5NB. A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kv Impulse Withstand Voltage. Application Examples. Model Number Legend PC Power Relay A Miniature Relay with -pole A/5A Switching Capability and 0 kv Impulse Withstand Voltage Highly efficient magnetic circuit for high sensitivity (200 mw). Small, yet provides 0-kV impulse