ultra MINIature 2-POLes 2a (LOW PrOFILe signal relay) Ftr-B3 series rohs compliant Features

Size: px

Start display at page:

Download "ultra MINIature 2-POLes 2a (LOW PrOFILe signal relay) Ftr-B3 series rohs compliant Features"

Diane Hall
5 years ago
Views:

1 ULTRA MINIATURE -POLES A (LOW PROFILE SIGNAL RELAY) FTR-B3 SERIES RoHS compliant Features DPDT C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight:.85g, Mounting space: 87mm Adopted superior contact spring for high frequency characteristic Comply with Telcordia / FCC standard - Isolation distance: min. 1.6mm - Dielectric strength between coil and contact: 15VAC - Surge strength: 5V Low power: Non-latch: 14mW (3mW at 4V) Latch: 1mW (1mW at 4V) High reliable bifurcated gold overlay silver contact UL, CSA recognized. Confirms to IEC 695, UL195, EN695. Spacing & high breakdown voltage (Basic insulation, 15 working volts, pollution degree ). RoHS compliant since date code: 431B8 Please see page 11 and 1 for more information

2 ORDERING INFORMATION FTR-B3 G B 1 Z -B 1 [Example] (a) (b) (c) (d) (e) (f) (g) (a) Series Name FTR-B3 series (b) Terminal Type C: through hole G: surface mount S: surface mount, space saving (c) Operation Function A: standard type B: latching type (1 coil) (d) Rated voltage of coil 1.5 : 1.5 VDC 9 : 9VDC 3 : 3VDC 1: 1 VDC 4.5 : 4.5VDC 4 : 4VDC 6: 6VDC (e) Contact material Z: gold overlay silver nickel (standard) P: gold overlay silver palladium (f) Relay enclosing direction* B: standard enclosing direction (g) Number of relays per reel* 1: 1, (standard) Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code: FTR-B3GA1Z-B1 Actual marking: B3GA1Z Note: *: - Only surface mount types (G and S) are applicable - All relays are packaged in tubes unles P/N ends with -B1 PART NUMBERS Standard type Ordering Part Number Series Terminal Type Operation Coil Voltage Contact Material FTR-B3CA1.5Z FTR-B3CA3Z 3 FTR-B3CA4.5Z 4.5 C: through FTR-B3CA6Z 6 hole FTR-B3CA9Z 9 FTR-B3CA1Z 1 FTR-B3CA4Z 4 FTR-B3GA1.5Z FTR-B3GA3Z G: surface A: mono-stable FTR-B3GA6Z FTR-B3 6 mount (standard type) FTR-B3GA9Z 9 FTR-B3GA1Z 1 FTR-B3GA4Z 4 FTR-B3SA1.5Z FTR-B3SA3Z 3 FTR-B3SA4.5Z S: space saving 4.5 FTR-B3SA6Z surface 6 FTR-B3SA9Z mount 9 FTR-B3SA1Z 1 FTR-B3SA4Z Z: Au-Ag-Ni P: Au-Ag-Pd

3 Latching type (1 coil) Ordering Part Number Series Terminal Type Operation Coil Voltage Contact Material FTR-B3CB1.5Z FTR-B3CB3Z 3 FTR-B3CB4.5Z 4.5 C: through FTR-B3CB6Z 6 hole FTR-B3CB9Z 9 FTR-B3CB1Z 1 FTR-B3CB4Z 4 FTR-B3GB1.5Z FTR-B3GB3Z G: surface FTR-B3GB6Z FTR-B3 B: latching 6 mount FTR-B3GB9Z 9 FTR-B3GB1Z 1 FTR-B3GB4Z 4 FTR-B3SB1.5Z FTR-B3SB3Z 3 FTR-B3SB4.5Z S: space saving 4.5 FTR-B3SB6Z surface 6 FTR-B3SB9Z mount 9 FTR-B3SB1Z 1 FTR-B3SB4Z Z: Au-Ag-Ni P: Au-Ag-Pd 3

4 COIL DATA CHART Standard type Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage* 1 Coil Resistance ( ±1%) Must Operate Voltage* Must Release Voltage* VDC 16.1 Ω 1.13 VDC.15 VDC VDC 64.3 Ω.5 VDC.3 VDC VDC 145 Ω 3.38 VDC.45 VDC VDC 57 Ω 4.5 VDC.6 VDC VDC 579 Ω 6.75 VDC.9 VDC VDC 1,8 Ω 9. VDC 1. VDC Nominal Power (mw) VDC,54 Ω 18. VDC.4 VDC 3 Latching type (1 coil) Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage* 1 Coil Resistance ( ±1%) Must Operate Voltage* Must Release Voltage* VDC.5 Ω 1.13 VDC -.13 VDC VDC 9 Ω.5 VDC -.5 VDC VDC 3 Ω 3.38 VDC VDC VDC 36 Ω 4.5 VDC -4.5 VDC VDC 81 Ω 6.75 VDC VDC VDC 1,44 Ω 9. VDC -9. VDC VDC 4,8 Ω 18. VDC -18. VDC 1 Note: All values in the table are measured at C. *1: No contact current at C. Please see 'operating range' data for other conditions. *: Specified values are subject to pulse wave voltage. 14 Nominal Power (mw) 1 4

5 specifications Item Standard Type FTR-B3 ( ) A Latching Type FTR-B3 ( ) B Arrangement Contact material Form C Gold overlay silver nickel / Gold overlay silver palladium C ontact type Bifurcated contacts (cross-bar ) C ontact resistance ( initial value ) 75mΩ, maximum (6VDC, 1A) Contact C ontact rating 3VDC 1A /15VAC.3A (resistive) Maximum carrying/switching Maximum switching Maximum switching power voltage current A 6.5 VA / 3W 5 VAC, VDC M inimum switching load *1 mvdc,.1ma* 1 1 Coil Nominal Operate Operating power (at power (at C) C) temperature (no frost) 14mW to 3mW 1mW to 1mW 8mW to 13mW 57mW to 68mW -4 C to +85 C Time Value Life O perate ( at nominal voltage, without bounce ) 3ms maximum R elease ( at nominal voltage, without bounce ) 3ms maximum Mechanical 6 5x1 ops. min. (at 3Hz) 6 x 1 ops. min. (at 3Hz) Electrical (resistive load) 3 1 x 1 operations min. at 1A 3VDC (at.5hz) 3 1 x 1 operations min. at.3a 15VDC (at.5hz) Vibration resistance Malfunction Endurance 1 to 55 Hz at double amplitude of 3.3mm 1 to 55 Hz at double amplitude of 5mm Other Shock resistance Malfunction Endurance Min. 75 m/ s Min. 1 m/ s Weight Approximately.8g * 1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 5

6 INSULATION Item Resistance (initial) (5 VDC) SAFETY STANDARDS Type Compliance Contact rating UL UL 58 E63615 CSA C. No. 14 LR FTR-B3 Minimum 1, MΩ 1 min. Dielectric Strength open contacts 1, VAC (5/6 Hz) 1 min. Surge Voltage (coil and contact) coil and contacts adjacent contacts Clearance adjacent contacts 1.mm open contacts coil and contacts 1,5 VAC (5/6 Hz) 1 min. 1, VAC (5/6 Hz) 1 min.,5 V x 1µs standard wave.8mm 1.mm Creepage adjacent contacts 1.mm open contacts coil and contacts.8mm 1.6mm Flammability: UL 94-V (plastics).5a, 15VAC (resistive) 1A, 3VDC (resistive).3a, 11VDC (resistive) A, 3VDC (resistive) characteristic data Standard type Time (ms) Operation (return time characteristics) Release B3GA4.5Z n=1 Operation time.1..3 Coil Power (W) Maximum Switching Power AC Resistive Coil Temperature Rise ( C) Coil Temperature Rise current: 1A current:.1..3 Coil Power (W) Life Curve Nominal Voltage Multiplying Factor (%) Ambient Temperature (maximum applied voltage, operating voltage characteristics) current: 1A Operating voltage (hot coil) Standard type current: Operating voltage (cool coil) Ambient Temperature ( C) Contact Current (A) DC Resistive Operation (x1 4 ) VDC Resistive 3 VDC Resistive Contact Voltage (V) Contact Current (A) 6

7 Latching type (1 coil) Operation (return time characteristics) Time (ms) n=1 Operation time Release Pulse Characteristics n=1 set/reset Coil Temperature Rise ( C) Coil Temperature Rise current: 1A current: Nominal Voltage Multiplying Factor (%) Coil Power (W) Ambient Temperature (maximum applied voltage, operating voltage characteristics) current: 1A Operating voltage (hot coil) current: Operating voltage (cool coil) Latch Ambient Temperature ( C) Contact Current (A) Time (ms) Maximum Switching Power DC Resistive AC Resistive Contact Voltage (V) Operation (x1 4 ) Coil Power (W) Life Curve 15 VDC Resistive 3 VDC Resistive Contact Current (A) reference data Standard type Distribution of Operate and Release Voltage n=1 Operate Release Distribution of Operate and Release Time n=1 Operate Release Distribution of Bounce Time N=1 Operate Release Nominal Voltage Multiplying Factor (%) Time (ms) Time (ms) 7

8 Distribution of Contact Resistance n=1 Make Break Contact Resistance (mω) Nominal Voltage Multiplying Factor (%) Nominal Voltage Multiplying Factor (%) Magnetic Interference n=4 Operating Voltage Release Voltage Standard type When coil is ON When coil is OFF Distance between relays I (mm) Nominal Voltage Multiplying Factor (%) Nominal Voltage Multiplying Factor (%) Magnetic Interference n=4 Operating Voltage Release Voltage Standard type When coil is ON When coil is OFF Distance between relays I (mm) Isolation (db) High Frequency Characteristics n= n= Insertion Loss (db) High Frequency Characteristics n= n= Frequency (MHz) Latching type (1 coil) Distribution of Operate and Release Voltage n=1 Operate Release Nominal Voltage Multiplying Factor (%) High Frequency Characteristics n= Frequency (MHz) Distribution of Contact Resistance n=1 Make Break Contact Resistance (mω) Isolation (db) High Frequency Characteristics n= 1 Frequency (MHz) 1 Insertion Loss (db) Frequency (MHz) 1 8

9 DIMENSIONS FTR-B3C( )( )( ) - Through hole type Dimensions 1.6 ±. 7. ±..5 ± (1.5) 3. ±.. ±.. ±. 5.8± O.85 (-) ±. Mounting Pad (TOP VIEW) Wiring Diagram (TOP VIEW) (+) Marking (Coil side indication) Unit: mm FTR-B3G( )( )( ) - Surface mount type (standard) Dimensions 1.6 ±. 7. ± (1.5) 3. ±.. ±.. ±. 5.8± Mounting Pad (TOP VIEW) Wiring Diagram (TOP VIEW) (-) (+) Marking (Coil side indication) Unit: mm 9

10 DIMENSIONS FTR-B3S( )( )( ) - Space saving type Dimensions 1.6 ±. 7. ± Mounting Pad (TOP VIEW).4 +. (1.5) ±.. ±.. ±. Wiring Diagram (TOP VIEW) 5.8± (-) (+) Marking (Coil side indication) Unit: mm PACKAGING SPECIFICATIONS Packaging Method - Packaging Standard: JIS C 86 - Taping Type: TB Reel Type: R16D - Quantity of 1reel: 1 pieces Packaging Orientation Code:B Orientation mark side Feeding () Dimensions - Reel dimensions Tape Dimensions Top cover tape Embossed carrier tape Unit: mm Note: Relays are sold in packs of 1 pieces, please order 1 pieces as one unit. 1

11 RECOMMENDED SOLDERING CONDITIONS FOR SMT (TEMPERATURE PROFILE) IRS (Infrared Reflow Soldering) VPS (Vapor Phase Soldering) Temperature (C) T 3 T T preheating soldering cooling T 3 = 5C max. T = C max. T = 13C max. Temperature (C) T 3 T T 15C maximum preheating soldering cooling T 3 = C maximum T = 165C maximum T = 1C maximum 1 sec maximum 3 sec Max. 6 sec Max. 6 sec Max. 9 sec Max. Note: 1.Temperature profiles show the temperature of PC board surface..please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. PRECAUTIONS - For details on general precautions, refer to the section on technical descriptions. - Since this is a polarized relay, follow the instructions of the internal wiring diagram for the ± connections of the coil. - Note that the terminal layout and internal wiring of the surface mount relay are a top view 11

12 RoHS Compliance and Lead Free Relay Information 1. General Information If applicable, relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. ( Lead free solder plating currently used in relays is Sn-3.Ag-.5Cu. From February 5 forward Sn-3.Cu-Ni will be used for the FTR-B3 and FTR-B4 series relays. All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, decabde and PFOS). It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). LF is marked on each outer and inner carton. (No marking on individual relays). To avoid lead containing relays (for lead-free sample, etc.) please consult with area sales office. We will ship lead containing relays as long as the lead containing relay inventory exists, if allowed. Note: Cadmium was exempted from RoHS on October 1, 5. (Amendment to Directive /95/EC). Recommended Lead Free Solder Profile Recommended solder paste Sn-3.Ag-.5Cu or Sn-3. Cu-Ni (only FTR-B3 and FTR-B4 from February 5. Reflow Solder condition Flow Solder condition: Peak Temp.: max. 5 C Pre-heating: maximum 1 C Soldering Soldering: dip within 5 sec. at 5 6 C solder bath temperature ( C) Pre-heating Cooling Solder by Soldering Iron: Soldering Iron Temperature: maximum 36 C Duration: maximum 3 sec. 9~1 sec. ~3 sec. max. 1 sec. (duration) 3. Moisture Sensitivity Moisture Sensitivity Level is not applicable to electromechanical relays. 4. Tin Whisker We highly recommend that you confirm your actual solder conditions SnAgCu and SnCuNi solder are known as low risk of tin whisker. No considerable whisker length was found by our in-house test. 1

13 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda -chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) Fax: (81-3) Web: North and South America Fujitsu Components America, Inc. 5 E. Caribbean Drive Sunnyvale, CA 9489 U.S.A. Tel: (1-48) Fax: (1-48) components@us.fujitsu.com Web: Europe Fujitsu Components Europe B.V. Diamantlaan 5 13 WV Hoofddorp Netherlands Tel: (31-3) Fax: (31-3) info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 1E Pasir Panjang Road #1-1 Citilink Warehouse Complex Singapore Tel: (65) Fax: (65) fcal@fcal.fujitsu.com Web: 9 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. September 11th, 9. 13

MINIATURE RELAY 2 POLES, 2A HIGH INSULATION/WIDE GAP FTR-C1 Series

MINIATURE RELAY 2 POLES, 2A HIGH INSULATION/WIDE GAP FTR-C1 Series RoHS compliant Features 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,00V between open contacts,000v between coil