Industry's smallest size, with main unit dimensions of mm. Typical Specifications
|
|
- Collin Todd
- 5 years ago
- Views:
Transcription
1 SPVQ8 Product Line Poles Positions 1 1 Industry's smallest size, with main unit dimensions of 7mm Circuit N.O. N.C. N.O. N.C. Terminal type ngle For Lead Press fit ngle For Lead Press fit With wire( Left side) With wire (from side) With wire( Left side) With wire (from side) Typical Specifications Items Rating (max.)/(min.) Contact resistance (Initial / fter operating life) Operating force Operating life Without load With load Main body Minimum order unit(pcs) Packing specifications form Japan Export type Without boss Boss-single side Without boss Boss-single side 1,7 4 7, 1,6 B SPVQ8111 SPVQ811 SPVQ61 SPVQ8141 SPVQ811 SPVQ8161 SPVQ817 SPVQ8181 SPVQ8114 SPVQ811 SPVQ81 SPVQ61 SPVQ841 SPVQ81 SPVQ861 SPVQ874 SPVQ881 SPVQ814 SPVQ81 SPVQ8 SPVQ61 SPVQ8 SPVQ8 SPVQ861 SPVQ86 SPVQ86 SPVQ86 Specifications.1 1V DC / μ V DC mω max. / (Standard type) mω max. / Ω max. (Long-life type) 1±.N,cycles (Standard type) 1,,cycles (Long-life type),cycles (Standard type) 1,,cycles (Long-life type) Product Standard type Long-life type SPVQ811 SPVQ81 SPVQ61 SPVQ841 SPVQ81 SPVQ861 SPVQ871 SPVQ881 SPVQ811 SPVQ61 SPVQ61 Drawing Package Notes 1. Products with a wire will be supplied as follows. Unless specified, the length of the lead wire is mm. Color is either red or black. Please consult us for length modification. Please specify circuits (N.O. or N.C.)for wired (side)types. Unless specified, the circuit will apply N.O. Product with wire will be build-to-order.. This unit cannot be used in water (IP67 rating, except for terminal). Packing Specifications Tray Bulk Packing specifications type Number of packages (pcs.) 1 case /Japan 1 case /export packing Export package measurements (mm) Packing specifications type Number of packages (pcs.) 1 case /Japan 1 case /export packing Export package measurements (mm) 1,7 7, B 4 1,6 7 Refer to P.7 for soldering conditions. 61
2 SPVQ8 Package Terminal ø Terminal 1- ON-OFF.8.8 Terminal ON-OFF ø Terminal -.6 ø ø Terminal Terminal - ON-OFF.6 - ON-OFF ø Terminal ø Terminal (.6) (9 ) Terminal.1 ø Terminal Terminal 1- ON-OFF.4 (.6) (9 ) Terminal.1 ø ON-OFF ON-OFF Terminal Terminal Ø Terminal Ø.6 (9 ).6 Bend base 6
3 SPVQ8/ Ø Terminal 1-1 Package 6.. Terminal Ø Ø.1 Terminal Ø Ø 6.. Terminal (.4).8 Terminal 1 Ø.7 Terminal ( 9 ) (.6) 6..4 Terminal Ø (9 ).6 Bend base Ø.7 Operating force Terminal 1- (- ).6 ± (.4) Terminal 1- (- ).8.8 Ø.7.8. Terminal 1 Terminal (.4) Ø.6 1. (Red) 1(Black) VSS.f -Ø 1. (Red) 1(Black) VSS.f 6
4 SPVQ8 Package Terminal 1- (- ).6 (Red) Operating force standard VSS.F 1 (Black) Terminal 1-.8 (- ) (.4).1 VSS.F 1.7 Ø.7 Ø Ø (Red) Ø.7.1 (.4) - 1(Black) (The top of the plunger) (The top of the plunger) (- ) (The top of the plunger) VSS.F.6 VSS.f Circuit Diagram (.4).1 (Red) 1 (Black) -Ø (.4).1 (Red) 1(Black) 1.7 Ø Ø Normal Open Normal Close 64
5 SPVQ8/ Recommended Unit Terminal Shape for Press-Fit Terminals (Normally Open) SPVQ8114, SPVQ811 Ø.4±. 4.6± ±.1 ±..±.1.4±. Ø.1±. SECTION -.±.1 6-C.4 ±.1 () (.).±.1.4± or ±.1 Package Recommended Unit Terminal Shape for Press-Fit Terminals (Normally Closed) SPVQ814 Ø.1± ±.1 ±. Ø.4±. SECTION - ±.1 () ±.1 4.6±.1.4±..±.1 6-C.4.±.1 (.).4± or ±.1 6
6 Series Photo Operation type (mm) SPVQ8 SPVQ SSCN SPVQ9 SPVQC SPVQE Two-way W D H Operating range 4 to +8 utomotive use Life cycle (availability) Poles / Positions 1/1 Rating (max.) Rating (min.) Durability Electrical performance Mechanical performance Operating life without load Operating life with load R a t i n g(m a x.) Initial contact resistance Insulation resistance Voltage proof Terminal strength ctuator strength Cold,cycles 1Ω ma x. or 1,,cycles Ω max.,cycles 1Ω ma x. or 1,,cycles Ω max. N for 1minute (with terminal) Wire strength N for 1minute (with wire) 1/1 1/ 1/ / / /.1 1V DC m 6V DC m 18V DC μ V DC 1μ V DC μ V DC,cycles,cycles mω max. 1,cycles 1,cycles 1MΩ min. V DC V C for 1minute N for 1minute,cycles mω max.,cycles mω max. 7mΩ max. 1MΩ min. V DC V C for 1minute N 1N N 4 h NEW, cycles C I R C U I T 1 - a n d mω max. C I R C U I T Ω m a x., cycles C I R C U I T 1 - a n d mω max. CIRCUIT C I R C U I T 1 - a n d mΩ max. C I R C U I T mω m a x. 1MΩ min. 1V DC 1V C for 1minute Package Environmental performance Dry heat 8 h Damp heat 6, 9 to 9% RH h Operation force 1±.N N max. 1±.N Page Detector Switches Soldering Conditions 7 Detector Switches Cautions 74 Note Indicates applicability to all products in the series. 1
7 Detector Switches Soldering Conditions Example of Reflow Soldering Condition 1. Heating method: Double heating method with infrared heater.. Temperature measurement: Thermocouple φ.1 to. C (K)or CC (T)at soldering portion (copper foil surface). heat resisting tape should be used for fixed measurement.. Temperature profile Temperature ( C ) 1 Room Pre-heating F max. C max. B D E Time (s) Series (Reflow type) ( )s max. B( ) C(s) D( ) E( ) F(s) SPPB 4 SPPW8 Package SPVE SPVL SPVM SPVN SPVR SPVS SPVT SSCM SSCQ SPVQC, SPVQE Notes 1. The condition mentioned above is the on the mounting surface of a PC board. There are cases where the PC board's greatly differs from that of the switch, surface depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface s.. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Reference for Hand Soldering SPVS, SPVN, SPVT, SPVM, SPVR, SPVE, SPPW8,SSCQ, SSCM, SPVL, SSCT, SPVQC, SPVQE SPVQ1, SPVQ, SPVQ6, SPVQ7, SPVQ8, SPVQ9, SSCN, SPVQ SPPB (Reflow) Series SSCF, SPPB (For Lead, Dip) Soldering ± ±1 ± ±1 Soldering time s max. +1 / s s max. +1 / s Reference for Dip Soldering ( terminal types) SSCT, SPVQ1, SPVQ, SPVQ6, SPVQ7, SPVQ8, 1±1 6s max. 6± ±1s SPVQ9, SPVQ SPPW8, SPPB SSCF Series Preheating 1 max. Items Preheating time Dip soldering Soldering 6s max. ± Duration of immersion ±1s ー 6± ±1s 7
Long travel type applicable to oblique pressing without an actuator. Typical Specifications. Items
SPVQ Waterproof Detector Slide Push Rotary Power Dualinline Package Product Line life Positions part shape Long travel type applicable to oblique pressing without an actuator Typical Specifications Items
More information1.9mm thick two-way operation type detector switch
Switch.9mm thick two-way operation type detector switch SPVT Series Surface mount type, two-way detection with body thickness of.9mm NEW Typical Specifications Items Ratingmax.min. Resistive load Contact
More informationTypical Specifications. (Resistive load) Contact resistance (Initial/After operating life) Operating force. Operating life. For PC board.
Switch SPVQ Series Water-proof structure with mm long travel. Typical Specifications Items Rating(max.)/(min.) Contact resistance (Initial/After operating life) Operating force Specifications 0.A V DC/0BA
More informationTypical Specifications. Output signal. Rating. Operating life. Operating temperature range. Number of detents. Number of pulse
ECAH ECCH mm Size ABC Switch capable of composite control Typical Product Line Structure Actuator length (mn m) Output signal ating Number of detents Operating life Items Operating temperature range Number
More informationRotary sensors catering to diverse position detection needs. Typical Specifications. Rated voltage. Operating life.
RDC4 RDC RDC9 Rotary Type Rotary sensors catering to diverse position detection needs Typical Specifications Specifications Items RDC4 RDC RDC9 Rated voltage V DC Operating life,,,,, Total resistance kω.kω
More informationHeavy torque and comfortable operation feel for encoder and potentiometer applications. Typical Specifications. Items. Rating 1mA 5V DC 0.
EC0A RK0 0mm Size Heavy torque and comfortable operation feel for encoder and potentiometer applications Typical Specifications Items Specifications Encoder Potentiometer Product Line Length of the configuration
More information9mm Size Metal Shaft Snap-in Type. Single-unit and dual-unit types suit a variety of controls. Typical Specifications. Total resistance tolerance ±20%
K09L 9mm Size Snap-in Single-unit and dual-unit s suit a variety of controls Typical Specifications Items Specifications tolerance ±% Maximum operating voltage V AC, V DC Total rotational angle 300 ± otational
More informationA wide range of versatile products applicable for various types of control. Typical Specifications. Total resistance tolerance ±20%
RK63 6mm Size A wide range of versatile products applicable for various types of control Typical Specifications Items Specifications tolerance ±% Maximum operating voltage V AC, V DC Total rotational angle
More informationRemote controllable and available in a wide variety of products. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage
RK168 Motor-driven Remote controllable and available in a wide variety of products Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage 50V AC Total rotational angle 0 ±5
More informationRatings and Safety Standards. Maximum rating (Power) Maximum rating (Encoder) Contact resistance (Encoder) Initial / after life test
SDKZ with Encoder type power switch with encoder Detector Power Dual-in-line Package Product Line Circuit arrangement DPST From "OFF" position to "ON" position ±N ±N ±N Torque Other positions 0±N ±N.±N
More informationFirm operating feel and high robustness ideal for integrated control of automotive equipment. Typical Specifications(Stick Switch)
RKJXW 8-directional Stick (with Encoder / enter-push Function) Firm operating feel and high robustness ideal for integrated control of automotive equipment Typical Specifications(Stick ) Items RKJXW1 RKJXW2(Inner-shaft)
More informationFirm operating feel and high robustness ideal for integrated control of automotive equipment. Typical Specifications(Stick Switch)
RKJXW 8-directional Stick (with Encoder / enter-push Function) Firm operating feel and high robustness ideal for integrated control of automotive equipment Typical Specifications(Stick ) Items RKJXW1 RKJXW2(Inner-shaft)
More informationROTATRY ENCODER REC-03 REC-05 / 06
ROTATRY ENCODER REA-01 REA-02 REA-03 REB-01 REC-03 REC-05 / 06 RED-01 REE-01 25-4-2006 Characteristics Series Circuit Operating temperature range Soldering REA-01 1P4T -20 to 60 Dip, Manual Rating (max.)
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage: NP0/X7R (Pb Free & RoHS compliant)
w DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage: NP0/X7R (Pb Free & RoHS compliant) 1K V TO 4K V 10 pf to 33 nf Sep 30, 2005 V. 1 2 SCOPE This specification describes Highvoltage
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage: NP0/X7R (Pb Free & RoHS compliant)
w DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage: NP0/X7R (Pb Free & RoHS compliant) 100 V TO 500 V 10 pf to 470 nf Product specification Sep 08, 2005 V. 0 Product specification 2 SCOPE
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: (Pb Free & RoHS compliant) 2.2 pf to 4.7 nf Product specification Mar 1, 2007 V. 0 Product specification 2 SCOPE This specification
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Ultra small: NP0/X5R/X7R/Y5V (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS : NP0/X5R/X7R/Y5V (Pb Free & RoHS compliant) 6.3 V TO 50 V 1 pf to 100 nf Product specification Product specification 2 Surface-Mount Ceramic Multilayer
More informationSPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies to 0.8mm x 1.6mm size 1/2W, fixed metal film chip resistors rectangular type for use in
More informationFrelTec GmbH. Current Sensing Chip Resistor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 11/22/2016 1/10 Freltec GmbH www.freltec.com SPECIFICATION Part Number 018 05 * R001 * J * T05 ** E* Type Size Value Tolerance Packing Power Rating 018
More informationThick Film Chip Resistors Low Resistance ( for 0402 ) This specification applies for the RL04 ( 0402 ) of thick film chip resistors made by TA-I.
page 1 / 8 1. Scope : This specification applies for the RL04 ( 0402 ) of thick film chip resistors made by TA-I. 2. Construction: Over Coat Conductor : (Lead-free or with lead ) Sn Plating Ceramic Substrate
More information9mm Size Insulated Shaft Snap-in Type. Compact type potentiometer with 9.8mm width is ideal for designing high density sets. Typical Specifications
RK09K RK09D 9mm Size Snap-in Compact type potentiometer with mm width is ideal for designing high density sets Typical Specifications Items Specifications resistance tolerance ±% ±% Maximum operating voltage
More informationMetallized Polycarbonate film capacitors MKC 344
MKC RADIAL POTTED CAPACITORS PITCH 10/15/22.5/27.5 mm handbook, full pagewidth P = 10 mm P = 15 mm P = 22.5 to 27.5 mm DR931980 Fig.1 Simplified outlines. FEATURES 10 to 27.5 mm lead pitch Small dimensions
More informationMULTILAYER CERAMIC ANTENNA (LINEAR POLARIZATION MODE) FOR 400MHz~500MHz. Product Specification 1 (Preliminary)
MULTILAYER CERAMIC ANTENNA (LINEAR POLARIZATION MODE) FOR 400MHz~500MHz Product pecification 1 (Preliminary) QUICK REFERENCE DATA Working Frequency* Bandwidth Gain VWR Polarization Azimuth Impedance 400~500MHz
More informationSPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/32W, 01005 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies 0.2mm x 0.4mm (01005) size 1/32W, fixed metal film chip resistors rectangular type for
More informationChip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
More information14mm Size Insulated Shaft Snap-in Type. A 14mm wide potentiometer for audio, visual, electronic musical instruments and various applications
RKK mm Size Snap-in A mm wide potentiometer for audio, visual, electronic musical instruments and various applications Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage
More informationFrelTec GmbH. Current Sensing Chip Resistor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 6/8/2015 1/13 Freltec GmbH www.freltec.com SPECIFICATION Part Number 017 05 * R001 * J * T05 ** D E Size Value Tolerance Packing TCR Power Rating 017
More informationThin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
More informationThick Film Chip Resistors. ( Lead Free for RM series standard ) page 1/13
( Lead Free for RM series standard ) page 1/13 1. Scope : This specification applies for the RM series of thick film chip resistors made by. 2. Construction: Over Coat Conductor : (Lead-free or with lead
More informationSp e c i f i c a t i o n
K M Y Last update: 2013.12.1 No.RMC-K-HTS-0006-8 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1
More informationSPECIFICATION FOR APPROVAL 1/8W 0816 LOW RESISTNACE CHIP RESISTOR
PAGE : 1 OF 11 1/8W 0816 LOW RESISTNACE CHIP RESISTOR 1. Scope This specification applies to 0.8mm x 1.60mm size 1/8W, fixed metal film chip resistors rectangular type for use in electronic equipment.
More informationITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :
ESTABLISHMENT 2006. 06. 16 APPROVED REVISION 2006. 12. 19 Series NO:IP061219001 APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : You can reapprove only the changed quality request recorded in spec
More information- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB
AT02M0.09 - Page 1 of 13 Product Family: Part Number Series: Temperature Variable Attenuators ATV112F Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film resistive
More informationSMD Resistor Networks
Product: Size: Thick Film Array Chip Resistor-SMRA Series 42x4 / 63x4 / 42x4(Concave) / 63x4(Concave) 42x8 official distributor of Thick Film Array Chip Resistor-SMRA Series 1. Scope -This specification
More informationEE-SX1330. Photomicrosensor (Transmissive) Ultra-Compact Slot / SMD Type (Slot width: 3 mm) Ordering Information
Photomicrosensor (Transmissive) EE-SX33 Ultra-Compact Slot / SMD Type (Slot width: 3 mm) PCB surface mounting type. High resolution with a.3-mm-wide aperture. Be sure to read Safety Precautions on page
More informationSMD - Resistors. Pulse Withstanding Thick Film Chip Resistor-SMDP Series. Product: Size: 0603/0805/1206/1210/2010/2512. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: 0603///12// official distributor of 1. Scope Pulse Withstanding Thick Film Chip Resistor-SMDP Series -This specification applies to
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationH11G1M, H11G2M 6-Pin DIP High Voltage Photodarlington Optocouplers
HGM, HG2M 6-Pin DIP High Voltage Photodarlington Optocouplers Features High BV CEO : 00 V Minimum for HGM 80 V Minimum for HG2M High Sensitivity to Low Input Current (Minimum 500% CTR at I F = ma) Low
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationInstallation Precautions
Installation Precautions 1. Lead orming (1) Avoid bending the leads at the base and ensure that the leads are fixed in place. (2) Bend the leads at a point at least 2mm away from the base. (3) orm the
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationData Sheet. Chun Ann J.C Liu. Customer: Thin Film Precision Chip Resistor - AR Series. Checked. Product :
Data Sheet Customer: Product : Thin Film Precision Chip Resistor - AR Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 19-Aug-10 Edition : REV.C6 Produced by Checked Approved by Prepared
More informationRMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
More informationThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
More informationKP 376 KP/MMKP 376. AC and pulse metallized polypropylene film capacitors. Fig.1 Simplified outlines.
KP AND KP/MMKP RADIAL POTTED CAPACITORS PITCH 15/22.5/27.5 mm P=15 mm P = 22.5 to 27.5 mm DR931960 Fig.1 Simplified outlines. FEATURES 15.0 to 27.5 mm lead pitch Supplied loose in box and taped on reel.
More informationCHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)
CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal
More information9mm Size Insulated Shaft Snap-in Type
Compact potentiometer with mm width is ideal for designing high density sets. Typical Specifications Items Specifications ±% tolerance ±% Maximum operating voltage for AC only rotational RK09K: 80± RK09D:
More informationDATA SHEET. KP 460 to 464 Polypropylene film foil capacitors. BCcomponents
DATA SHEET KP 460 to 464 Polypropylene film foil capacitors Supersedes data of 2001 Sep 13 File under BCcomponents, BC05 2002 Oct 09 KP AXIAL EPOXY LACQUERED TYPE 296x12(full_width) CBA369 Fig.1 Simplified
More information2.4 GHz ISM Band Working Frequency
RFBLN 2012 (0805) Series RoHS Compliance MULTILAYER CERAMIC BALUN TRANSFORMER Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBLN2012090A1T *Contents in this sheet are subject to change
More informationDISCONTINUED. California Eastern Laboratories PS9817-1,-2. NEC's HIGH CMR, 10Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
NEC's HIGH CMR, 1Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER DESCRIPTION NEC's and PS9817-2 are active-low type high-speed photocouplers that use a GaAlAs light-emitting diode
More informationNEC's HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
NEC's HIGH CMR, 1 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER PS9814-1,-2 DESCRIPTION NEC's PS9814-1 and PS9814-2 are active-low type highspeed optocouplers that use a GaAlAs
More informationSurge Withstanding Chip Resistor SWR Series
SR Series Features -High power rating -Excellent surge withstanding & pulse withstanding performance -Improved working voltage ratings -Standard package sizes of 0603~ -EC-Q200 Compliance pplications -Metering
More informationChip Array Resistor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Chip array resistors are general passive component which is useful for derating voltage, current controlling in circuit and surface mounting is available. Samsung electro-mechanics manufactures
More informationThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
More informationType CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
More informationCP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES
High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE Sealed 13.1 14.1 9..374 FEATURES Maximum carrying current of 3 A (4 mw type, 1 V applied)
More informationPackage / Case (Inch) 0402 Tolerance ±1 % Power Rating 0.1 W Number of each resistor 200
RS_Stock_No:123-762 1/16S ITS Package / Case (Inch) 0402 Power Rating 0.1 W Number of each resistor 200 1 1/16SPTH 0 Ω 66 1/16S471TH 470 Ω 131 1/16S244TH 240 kω 2 1/16S-1R0TH 1 Ω 67 1/16S511TH 510 Ω 132
More informationSMD MELF - Resistors. Metal Film Precision Resistor - SMDM Series Size: 0204/ official distributor of
Product : Metal Film Precision Resistor - SMDM Series Size: 0204/ 0207 official distributor of Metal Film Precision Resistor (SMDM Series) 1. Features -Excellent overall stability -Tight tolerance down
More informationData sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
More informationFOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
PHOTOCOUPLER PS8741 FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
More informationFOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
DESCRIPTION FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER PHOTOCOUPLER PS8741 NEPOC Series The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
More information1 GHz capable, 3 W carrying power (at 1 GHz), 50Ω impedance and 2 Form C relays
1 GHz capable, 3 W carrying power (at 1 GHz), 5Ω impedance and 2 Form C relays RA RELAYS (ARA) 9.7 14.7.382.579 5.9.232 mm inch RoHS compliant Protective construction: Sealed type ORDERING INFORMATION
More information( ) DIN EN : successor standard of DIN VDE0884
PC3SFYVZ Series PC3SFYVZ Series Zero cross type is also available. (PC3SFYVZ Series) VDRM : 600V, Reinforced insulation type Non-zero cross type DIP 6pin Phototriac Coupler for triggering Description PC3SFYVZ
More informationPHOTOCOUPLER PS2505-1,-2,-4,PS2505L-1,-2,-4
PHOTOCOUPLER PS25-1,-2,-4,PS25L-1,-2,-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS25-1, -2, -4 and PS25L-1, -2, -4 are optically coupled isolators
More informationPHOTOCOUPLER PS2506-1,-2,-4,PS2506L-1,-2,-4
PHOTOCOUPLER PS2506-1,-2,-4,PS2506L-1,-2,-4 HIGH ISOLATION VOLTAGE AC INPUT, DARLINGTON TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS2506-1, -2, -4 and PS2506L-1, -2, -4 are
More informationOver Coat. Resistive Element RBS 10 B T P Product Code Size Tolerance Packaging TCR Nominal. e.g., (1608) 1/10W.
page 1/10 1. Scope : This specification applies for the RBS series of chip resistors made by TA-I. 2. Construction: Over Coat Sn Plating Ni Plating Resistive Element Ceramic Substrate Inner electrode 3.
More informationCF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
More informationRF Signal Relays AXICOM. HF3 Relay
HF3 Relay n Y-Design n Frequency range DC to 3GHz n Impedance 50Ω or 75Ω n Small dimensions (14.6x7.2x10mm) n 1 form C contact (1 changeover contact) n Immersion cleanable n Low power consumption ( 140mW)
More informationMICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
More informationApplication. Features
Thick Film Chip Resistor CR Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication equipment:
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationCHIP FERRITE BEADS ARRAY
CHIP FERRITE BEADS ARRAY Features 1. Availabe in a wide range of impedance values and providing excellent EMI suppression characteristics for various types of noise. 2. Line(3,4) is achievable with a single
More informationK2010 Series. cosmo 6PIN PHOTOTRANSISTOR PHOTOCOUPLER. Schematic. Description. Features. Applications
Description Schematic The K series consist of an infrared emitting diode, optically coupled to a phototransistor detector. 6 They are packaged in a 6-pin DIP package and available in wide-lead spacing
More informationFERROXCUBE DATA SHEET. SMD common mode chokes EMI-suppression products. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET Supersedes data of September 2004 2008 Sep 01 SMD COMMON MODE CHOKES FOR EMI-SUPPRESSION General data ITEM Strip material Solderability Taping method SPECIFICATION copper (Cu), tin
More informationNotice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 214. All of the contents specified herein are
More informationType RN73 Series. Thin Film Precision Resistors. Electrical Characteristics. Key Features. Applications
Type RN73 Series Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Terminal finish electroplated 100% matte Sn Applications Communications Industrial Controls
More informationFUSIBLE RESISTOR - NFR25H
FUSIBLE RESISTOR - FEATURES Metal film technology Suitable for protection of circuit boards and designs Overload protection without risk of fire Defined interruption behavior (fusing time) Wide range of
More informationData Sheet. Customer: Pulse Withstanding Chip Resistor - PWR Series Size: 0603/0805/1206/1210/2010/2512 Issued Date: 13-Oct-17
Data Sheet Customer: Product: - Size: 0603/0805/1206/1210/2010/2512 Issued Date: 13-Oct-17 Edition: REV.C3 VIKING TECH CORPORATION VIKING TECH CORPORATION KAOHSIUNG BRANCH WUXI TMTEC CO., LTD. No.70 Guangfu
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationMOC3010M, MOC3011M, MOC3012M, MOC3020M, MOC3021M, MOC3022M, MOC3023M 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (250/400 Volt Peak)
MOC3010M, MOC3011M, MOC301M, MOC300M, MOC301M, MOC30M, MOC303M 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (0/400 Volt Peak) Features Excellent I FT Stability IR Emitting Diode Has Low Degradation
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS FEATURES Excellent CTR linearity depending on forward current Isolation test voltage, 53 V RMS A 1 4 C Fast switching times C 2 3 E Low CTR
More informationGL100MN0MPx. Surface Mount Type, Infrared Emitting Diode. GL100MN0MPx. Agency Approvals/Compliance. Features. Model Line-up.
GL0MN0MPx Surface Mount Type, Infrared Emitting Diode Features 1. Compact and thin SMD package 2. Top view and side view mountable 3. Plastic mold with resin lens 4. Peak emission wavelength: 940 nm TYP.
More informationApplication. Features. Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers
Thin Film Chip Resistor TR Series Application Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers Features Tight tolerance from ±1%,±5%
More informationPC4SD21NTZ Series. VDRM : 800V Zero cross type DIP 6pin Phototriac Coupler for triggering
PCSDNTZ Series Non-zero cross type is also available. (PCSDNTZ Series) VDRM : 800V Zero cross type DIP 6pin Phototriac Coupler for triggering Description PCSDNTZ Series Phototriac Coupler include an infrared
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Applications -Telecommunication -Medical Equipment Construction
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Applications -Telecommunication -Medical Equipment Construction
More informationVersion: 1.2 Document code:ma2512 Effective date : Page: 1 of 7. Metal Alloy shunt resistor MA2512 series ROHS
Document code: Page: 1 of 7 Metal Alloy shunt resistor series ROHS Metal Alloy Shunt Resistor Specification Document code: Page: 2 of 7 Metal Alloy shunt resistor series ROHS Scope This specification applies
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationThick Film Chip Resistors ( Lead-Free for RM series standard )
page number 1/15 1. Scope : This specification applies for the RM series of thick film chip resistors made by TA-I. 2. Construction: Over Coat (Color : Black) Conductor Sn Plating Ceramic Substrate Resistive
More informationChip Trimmer Potentiometer
A general purpose, compact, and low-profile type that is suitable for a wide range of applications. Car Use Features Conforms to JIS C 0806- (Packaging of surface mount components on continuous tapes).
More informationPC3SH11YFZ Series. VDRM : 600V, Reinforced insulation type Non-zero cross type DIP 4 pin Phototriac Coupler for triggering
PCSHYFZ Series Zero cross type is also available. (PCSHYFZ Series) VDRM : 600V, Reinforced insulation type Non-zero cross type DIP pin Phototriac Coupler for triggering Description reinforced insulation
More information6-PIN DIP, 0.08 Ω LOW ON-STATE RESISTANCE 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 6-PIN DIP,.8 Ω LOW ON-STATE RESISTANCE 2. A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS71E-1A and PS71EL-1A are solid state relays containing
More informationPC2SD11NTZ Series. VDRM : 400V Non-zero cross type DIP 6pin Phototriac Coupler for triggering
PCSDNTZ Series V DRM : 600V type is also available. (PC3SDNTZ Series) VDRM : 400V Nonzero cross type DIP 6pin Phototriac Coupler for triggering Description PCSDNTZ Series Phototriac Coupler include an
More informationCOBP PHOTO REFLECTOR with RED & IR LED
NJLR COBP PHOTO REFLECTOR with RED & GENERAL DISCRIPTION The NJLR is the compact surface mount type photo reflector, which is built in a, Infrared LED and a high sensitive detector. This product is suit
More informationDATA SHEET THIN-FILM CHIP RESISTORS TF 13 series, 0.1% TC25
DATA SHEET THIN-FILM CHIP RESISTORS TF 13 series, 0.1% TC25 10 Ω TO 1 MΩ Product Specification Jul 10, 2003 V.3 FEATURES High precision High long-tem stability Low temperature coefficient. APPLICATIONS
More informationPS2805C-1, PS2805C-4 DESCRIPTION FEATURES APPLICATIONS. PIN CONNECTION (Top View) R08DS0074EJ0300 Rev Jan 9, 2013
, HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER Data Sheet R08DS0074EJ0300 Rev.3.00 DESCRIPTION The and are optically coupled isolators containing a GaAs light emitting diode and an NPN
More informationThick Film Chip Resistors
Thick Film Chip Resistors MCR Series < Automotive > Features 1) Full line up from ultra small size (15) to 2512 with jumper type. 2) High reliability metal glazed thick film. 3) ROHM resistors have obtained
More informationFeatures. Ⅴ May treat as the general resistance use. Constructions
Features Applications Ⅰ Medical Equipment Ⅱ Testing / Measurement Equipment ⅢConsumer Product ⅣPrinter Equipment ⅤAutomatic Equipment Controller ⅥConverters ⅦCommunication Device,Cell phone, GPS, PDA ⅧMeasurement
More information