D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
|
|
- Sydney Craig
- 5 years ago
- Views:
Transcription
1 XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the XM-L/XM3-L Series Refer to page 7 for detailed specifications. XM3-LS Space-saving 9-pin Slim -sub Socket onnectors for oards oard mounting area is reduced by 33% (compared with previous models) using depth of 8.4 mm. -sub sockets with nine right-angle IP terminals. Mounting board thickness of either.6 mm or.0 mm (from difference in lock pin structure). ootprint on board reduced by 33% over previous models..6 mm 8.4 mm Reduced by 4. mm. XM3-094-L Previous model XM3-094-LS Slim model
2 XM3 Series onnectors Model XM3 XM3 XM3 XM3 Plugs with Right-angle IP Terminals Sockets with Straight IP Terminals Plugs with Solder up Terminals Sockets with Solder up Terminals ppearance Ratings and haracteristics Item Model Materials and inish pplicable Wires Plugs with Solder up Terminals: XM3 Plugs with Right-angle IP Terminals: ll XM3 models except those with 37 pins Sockets with Solder up Terminals: XM3 Sockets with Straight IP Terminals: XM3 Rated current 5 3 Rated voltage 300 V ontact resistance 5 mω max. (at 0 mv, 00 m max.) Insulation resistance,000 MΩ min. (at 500 V ) Withstand voltage,000 V for min (leakage current: m max.) Total insertion force umber of pins 3.33 max Individual pull-out force 0.9 min. (for gauge diameter of 0.99 mm) Insertion durability 00 times Operating temperature 55 to 05 (with no icing) Shield effectiveness (electrical field method) Mounted in panel: 5 d min. (30 to 900 MHz) Mounted on board: 0 d min. (30 to 300 MHz) The applicable wires for solder cup terminals are W to 8 (solid or stranded). Plugs with Right-angle IP Terminals: XM3 models with 37 pins XM3-37-@@@ Item Model XM3 XM3 XM3 XM3 Housing iber-glass reinforced PT resin (UL94V-0)/black iber-glass reinforced PT resin (UL94V-0)/Milky white ontacts Shell Mating end Phosphor bronze/nickel base, gold plated ronze/nickel base, gold plated Terminals Phosphor bronze/nickel base, tin plated ronze/nickel base, tin plated Steel/nickel Phosphor bronze/nickel base, gold plated Phosphor bronze/nickel base, tin plated
3 XM3 Plugs with Right-angle IP Terminals Model umber Legend. 3 nchor Type : nchor 5: o anchors nchor Screw Specifications : M.6 x 0.45 metric screws 3: Inch screws 0: o anchors 3 rounding ixture : Tap-hole rounding ixture : Lock Pin rounding ixture ote: If,, or 3 are omitted in the model number, then no nchor or rounding ixture is included. Ordering Information nchor and Tap-hole rounding ixture nchor and Lock Pin rounding ixture o nchor or rounding ixture Tap-hole rounding ixture Lock Pin rounding ixture ppearance nchor nchor Minimum ordering quantity (pieces) nchor : XMZ-00 (M.6 x 0.45 metric screws) --- ccessories o. of Tap-hole rounding ixture Lock Pin rounding ixture --- contacts 9 XM3-09- XM3-09- XM XM3-5- XM3-5- XM XM3-5- XM3-5- XM XM3-37- XM3-37- XM o nchor and Tap-hole rounding ixture o nchor and Lock Pin rounding ixture Tap-hole rounding ixture Lock Pin rounding ixture ppearance Minimum ordering quantity (pieces) o anchors ccessories o. of Tap-hole rounding ixture Lock Pin rounding ixture contacts 9 XM XM XM XM XM XM XM XM ote: lso available as standard models are the XM3-@@-/- with nchor (M.6 x 0.45) and rounding ixture, as well as the XM3-@@-50/50 with rounding ixture and no nchor. The enclosed Tap-hole rounding ixture is two M3 x 0.5, and the Lock Pin rounding ixture is M3 x 0.5 on the nchor side. 3
4 imensions (Unit: mm) Right-angle IP Terminals (o nchor or rounding ixture) (o nchor, Tap-hole rounding ixture Included) (o nchor, Long Pin rounding ixture Included) (nchor, Tap-hole rounding ixture Included) (nchor, Long Pin rounding ixture Included) The above illustration is for the 5-pin model (no nchor or rounding ixture) ote: The XM3 is produced based on JIS X50. The pin pitch is in a mixed arrangement of.77 mm and.74 mm following JIS standards (for 5-pin and 37-pin models). uniform pitch of.76 mm, however, is recommended for the mounting holes. board processed using a pinch of.76 mm will have sufficient margin and pose no practical problems Two, 3. dia Mounting Holes (t=.6mm, ottom View) ±0. ±0. Table of imensions ±0. ±0. imensions (mm) o. of contacts ±0. ±0. ±0. dia. - Two, 3.±0. dia
5 XM3 Sockets with Straight IP Terminals Ordering Information o nchor or rounding ixture nchor and Lock Pin rounding ixture ppearance Minimum ordering quantity (pieces) o. of contacts 9 XM3-090 XM XM3-50 XM XM3-50 XM XM3-370 XM imensions (Unit: mm) Straight IP Terminals XM3-@@0 (o nchor or rounding ixture) XM3-@@0- (nchor, Long Pin rounding ixture Included) The illustration on the left is for the 5-pin model (no nchor or rounding ixture). The illustration on the left is for the 5-pin model (nchor and rounding ixture). Two, 3. dia. M H 5 H nchor Lock Pin rounding ixture Table of imensions Mounting Holes (t=.6mm, ottom View) imensions (mm) o. of contacts H () ±0. ±0. ±0. Two, 3.±0. dia ±0. ±0. ±0. dia. 5
6 XM3 Plugs with Solder up Terminals XM3 Sockets with Solder up Terminals Ordering Information ppearance Plug Socket Minimum ordering quantity (pieces) o. of contacts 9 XM3-09 XM XM3-5 XM3-5 5 XM3-5 XM XM3-37 XM3-37 imensions Plugs with Solder up Terminals XM3-@@ 50 Sockets with Solder up Terminals XM3-@@ (Unit: mm) ote: The illustration above is for a 5-pin model. ote: The illustration above is for a 5-pin model. Two, 3. dia. Two, 3. dia dia. Table of imensions (XM3) imensions (mm) o. of contacts dia. Table of imensions (XM3) imensions (mm) o. of contacts
7 XM3-LS Sockets with Right-angle IP Terminals Ratings and haracteristics Ordering Information Rated current Rated voltage ontact resistance Insulation resistance Withstand voltage Insertion durability Operating temperature V 0 mω max. (at 0 mv, 00 m max.),000 MΩ min. (at 500 V for min),000 V for min (leakage current: m max.) 00 times 5 to 05 (with no condensation or icing) ppearance Minimum ordering quantity (pieces) o. of contacts ccessories nchors, M XM3-094-LS 80 Materials and inish Housing ontacts Shell nchors Lock pin grounding fixture iber-glass reinforced PT resin (UL94V-0)/ black Phosphor bronze/nickel base, flash gold plated Steel/nickel plated Stainless steel rass/tin plated imensions (Unit: mm) XM3-094-LS Mounting Holes (OTTOM VIW) 4.99± ine, dia. Two, 3.±0. dia. oard edge.74± ± max. ote: pplicable board thickness:.6 or.0 mm Panel utout (.6) Lock pin grounding fixture nchors (M ) Two, R min min. 6.4 min. our, R.5 ote: pplicable panel thickness is. mm max. Precautions Precautions for orrect Use Insert the onnector into the board and then simultaneously dip-solder the onnector terminals and lock pins to the board. oard (t=.6 mm) oard (t=.0 mm) utomatic Soldering utomated Soldering onditions (Jet low) () Soldering temperature: 50 ±5 () ontinuous soldering time: 5 ± s max. pprox..0 mm Lock pin grounding fixture pprox..6 mm Lock pin grounding fixture 7
8 Please check each region's Terms & onditions by region website. OMRO orporation lectronic and Mechanical omponents ompany Regional ontact mericas sia-pacific Korea urope hina Japan OMRO orporation 0-08 ll Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. at. o (04)(O)
.062 [1.57] Commercial Pin and Socket Connectors
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
More informationRemote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
More information2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
More informationFOR BOARD-TO-CABLE CONNECTION
OR OR-TO-L ONNTION 240R SRIS TURS 1.27 mm (0.0 in.) pitch contact arrangement enables high-density mounting. ellows ensure stable contact preventing pins from bending. The bellows also have excellent stability
More information22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
More informationWIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More information10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
More informationCLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationFOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with to 96 contacts are available for various
More informationEMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI at the signal & power I/O
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI at the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationlif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
More information1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More informationGecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More informationSeries 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationConnector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
More information0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationClassification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard. SPST-NO (1a) Fully sealed PCB terminal
SPST Slim Power Relay for A switching Slim -mm width and miniature size. (20.08 12. mm) High switching capability A (20 VAC and VDC), and high contact reliability by crossbar-twin contact. Low power consumption
More informationD Subminiature Connectors
Subminiature onnectors Subminiature ontents The ITT annon Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution
More informationM20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
More informationM22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
More information2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
More informationDETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R
INCH-POUND 20 August 2009 SUPERSEDING MS24264P 6 February 2004 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R Inactive for new design for
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationCOMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
More informationSGMMV. Rotary Servomotors SGMMV - A1 A 2 A 2 1. Model Designations. 6th. 5th digit. 1st+2nd digits. 7th digit. 4th digit. 3rd digit.
Rotary s Model Designations - mini Series st+nd digits 3rd digit th digit th digit 6th digit 7th digit st+nd digits Rated Output th digit Design Revision Order 7th digit Options Code Code Code B3 3.3 W
More informationSpring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
More informationOperating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationCF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
More informationSolid State Pressure Sensors D8M
Solid State Pressure Sensors D8M Solid State Pressure Sensors with Analog, Pulse or Frequency Outputs Compact housing measures 30L x 30W x 12.4H mm. Accept 4 mm OD tubing (D8M-A1, -R1); 3 mm OD tubing
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationBy using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
More informationPogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts
P Y L O N P O G O C O N T A C T S Pogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts The Pylon Advantage The Pylon Pogo Contact advantage comes
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
More informationPoke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
More informationSmall Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
More informationPush-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationAirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationDETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24264T 1 December 2016 SUPERSEDING MS24264R 20 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R Inactive for new
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationRated current. Dielectric withstanding voltage
mm Pitch Connectors HDR series Interface Connectors Outline HDR series connectors are very small surface mount (SMT) interface connectors with their contacts arranged at a pitch of mm, designed for the
More informationSBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More information2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
More informationuk.rs-online.com (UK) (International)
Thermocouple onnector Selection Guide uk.rs-online.com (UK) www.rs-components.com (International) International Thermocouple olour odes for onnector odies ll thermocouple connectors use true thermocouple
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
More information2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationAVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
More informationPRODUCT SPECIFICATION
SMT SHIELDED JACKS W.E. TYPE SYSTEM 1.0 SCOPE This specification covers the Molex shielded W.E. type product line which comprises a shield plug (male) and a jack (female) I/O type connector. This system
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More informationMemory card connectors
Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT Features The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer
More informationRECTANGULAR CONNECTORS
RETANGULAR ONNETORS FN-360 SERIES FEATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, P board mounting, and insulation displacement
More informationAmphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
More information15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
More informationCONNECTORS, RECEPTACLE, ELECTRICAL, SINGLE HOLE MOUNT, MINIATURE, CLASSES E, F, G, H AND R
INCH-POUND 20 August 2009 SUPERSEDING MS24265P 6 February 2004 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, SINGLE HOLE MOUNT, MINIATURE, CLASSES E, F, G, H AND R Inactive for new design
More information50AYA6A Product Details
Y6 Product etails MI/RFI Filters and ccessories lways U RoHS/LV ompliant (Statement of ompliance) Y6 (668-8) T Internal Number: 668-8 ctive Product Highlights: Filter - MI/RFI Filter Type = Power Line
More informationHi Density Card Connector SPECIFICATIONS: STANDARD MATERIALS AND FINISHES
Hi Density ard onnector SPEIFITIONS: The micro-miniature card connector series 106 is designed for a space conscious industry. The hi-density card configuration connector provides an extremely dense and
More informationRR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
More informationSINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationContents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationPRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
More informationINSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
More informationD-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More informationMicrominiature MTB1
Features/Benefits on-magnetic on-outgassing High performance Micropin TM contact system ( twist pin spring male contact and tubular socket contact) Single-in-line strip Insulator (no metal shell): 2 to
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/40 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS
More information