FOR BOARD-TO-CABLE CONNECTION
|
|
|
- Hugo Byrd
- 5 years ago
- Views:
Transcription
1 OR OR-TO-L ONNTION 240R SRIS TURS 1.27 mm (0.0 in.) pitch contact arrangement enables high-density mounting. ellows ensure stable contact preventing pins from bending. The bellows also have excellent stability with repeated insertion and extraction. ables and connectors are assembled by discrete wire I. onnectors on the cable side provide superb MI shielding/s protection with an inner-metal and outer-plastic dual cover. onforms to I Interface Tails are spaced in a four-row staggered arrangement (2.54 mm mm) (0.100 in in.) for easy P board design. SPIITIONS Item Operating temperature range urrent rating Voltage rating ontact resistance Insulation resistance ielectric withstand voltage pplicable wire MTRILS Item Insulator onductor Plating 55 to V mω max. ( 20 mv, 10 m) 1,000 MΩ min. ( 0 V) 7 V for 1 minute WG #28 and #30 stranded wires with φ0.5 to 0.65 mm (0.020 to in.) insulation diameter Materials Polyester (UL94V-0) opper alloy ontact Gold plating Terminal Palladium plating ORRING O N G / : Metal type (board side) or metal type for discrete wire I (cable side) G: Metal type for wire to wire heat bonded multi cable I S: over G: Gold plating : over : Wide-hole cover : 20, 26,,,, or 80 Unit type : Socket R: Plug : over Tail type 0: over 4: Straight 5: Right-angle 7: I 240 series ujitsu connector imensions are in millimeters (inches) 1
2 STRIGHT SOKT IMNSIONS 2.7 (0.106) nd terminal 5.2 (0.204) 6.3 (0.248) 9.2 (0.2) 2-M2.6 (0.102) 5.8 (0.228) 3.4 (0.134) 1.3 (0.051) 0.3 (0.011) 1.27 (0.0) 0.4 (0.015) (0.075) MOUNTING HOL LYOUT (OMPONNT SI) 26 and ±0.1 (±0.004) ±0.1 (±0.004) 1.27 ±0.1 (0.0 ±0.004 ) nd terminal 20,, and 80 ±0.1 (±0.004) ±0.1 (±0.004) 1.27 ±0.1 (0.0 ±0.004 ) nd terminal 2-φ2.8 (0.110) 2-φ2.8 (0.110) φ0.8 ±0.06 (0.031 ±0.004 ) φ0.8 ±0.06 (0.031 ±0.004 ) PTTRN INHIIT RS ROMMN PNL IMNSIONS ( ) ±0.1 (±0.004) ( ) ±0.1 ( ±0.004) R1.5 ±0.1 ( + 0.5) ±0.1 (( ) ±0.004 ) (R0.059 ±0.004 ) 8.1 ±0.1 (0.318 ±0.004 ) PRT NUMRS N IMNSIONS N G/ N G/ N-2440-G/ N-2440-G/ N-2440-G/ N G/ (0.4) (0.600) (0.8) (1.200) (1.6) (1.9) (0.529) (0.679) (0.929) 32. (1.279) (1.729) (2.029) (0.647) (0.797) (1.047) 35. (1.397) (1.847) (2.147) (1.080) (1.231) (1.480) 46. (1.830) (2.280) (2.580) (1.312) (1.462) (1.712) (2.062) (2.512) (2.812) (0.917) (1.067) (1.317) (1.667) (2.117) (2.417) imensions are in millimeters (inches) 2
3 RIGHT-NGL SOKT [MTL SHLL] IMNSIONS 2.7 (0.106) 1.27 (0.0) 0.4 (0.015) nd terminal 9.4 (0.379) 6.3 (0.248) 2-M2.6 (0.102) 5.2 (0.204) 8.61 (0.338) 11.5 (0.452) 1.3 (0.051) 0.3 (0.011) 2-M2.6 (0.102) 3.9 (0.153) MOUNTING HOL LYOUT (OMPONNT SI) 26 and ±0.1 (±0.004) 1.27 ±0.1 (0.0 ±0.004 ) 20,, and 80 ±0.1 (±0.004) 1.27 ±0.1 (0.0 ±0.004 ) φ 0.8 ±0.06 (0.031 ±0.002 ) ±0.1 (±0.004) 2 φ 2.8 ±0.1 (0.110 ±0.004 ) PTTRN INHIIT RS φ0.8 ±0.06 (0.031 ±0.002 ) ±0.1 (±0.004) 2 φ 2.8 ±0.1 (0.110 ±0.004 ) ROMMN PNL IMNSIONS ±0.1 (±0.004) R1.5 ±0.1 ±0.1 ( ±0.004) (R0.059 ±0.004 ) ( + 0.5) ±0.1 (( ) ±0.004 ) 8.1 ±0.1 (0.318 ±0.004 ) PRT NUMRS N IMNSIONS N-2420-G/ N-2426-G/ N-24-G/ N-24-G/ N-24-G/ N-2480-G/ (0.4) (0.600) (0.8) (1.200) (1.6) (1.9) (0.529) (0.679) (0.929) 32. (1.279) (1.729) (2.029) (0.647) (0.797) (1.047) 35. (1.397) (1.847) (2.147) (1.080) (1.231) (1.480) 46. (1.830) (2.280) (2.580) (1.312) (1.462) (1.712) (2.062) (2.512) (2.812) (0.917) (1.067) (1.317) (1.667) (2.117) (2.417) imensions are in millimeters (inches) 3
4 RIGHT-NGL SOKT [MTL SHLL] (WITH ORLOKS) IMNSIONS 2.7 (0.106) 1.27 (0.0) 0.4 (0.015) nd terminal 6.3 (0.248) 9.4 (0.370) 2-M2.6 (0.102) 5.2 (0.204) 1.3 (0.051) 11.5 (0.452) 16.3 (0.637) 0.3 (0.011) 3.1(0.122) 3.9 (0.153) MOUNTING HOL LYOUT (OMPONNT SI) 26 and ±0.1 (±0.004) 1.27 ±0.1 (0.0 ±0.004 ) 20,, and 80 ±0.1 (±0.004) 1.27 ±0.1 (0.0 ±0.004 ) φ 0.8 ±0.06 (0.031 ±0.002 ) ±0.1 (±0.004) 2 φ 2.8 ±0.1 (0.110 ±0.004 ) φ0.8 ±0.06 (0.031 ±0.002 ) ±0.1 (±0.004) 2 φ 2.8 ±0.1 (0.110 ±0.004 ) PTTRN INHIIT RS ROMMN PNL IMNSIONS ±0.1 (±0.004) ±0.1 ( ±0.004) R1.5 ±0.1 ( + 0.5) ±0.1 (( ) ±0.004 ) (R0.059 ±0.004 ) 8.1 ±0.1 (0.318 ±0.004 ) PRT NUMRS N IMNSIONS N-2420-G/H N-2426-G/H N-24-G/H N-24-G/H N-24-G/H N-2480-G/H (0.4) (0.600) (0.8) (1.200) (1.6) (1.9) (0.529) (0.679) (0.929) 32. (1.279) (1.729) (2.029) (0.647) (0.797) (1.047) 35. (1.397) (1.847) (2.147) (1.080) (1.231) (1.480) 46. (1.830) (2.280) (2.580) (1.312) (1.462) (1.712) (2.062) (2.512) (2.812) (0.917) (1.067) (1.317) (1.667) (2.117) (2.417) imensions are in millimeters (inches) 4
5 INSULTION ISPLMNT ONNTION (I) PLUG IMNSIONS ody nd terminal 1.27 (0.0) 6.4 (0.251) 7.5 (0.0) 9 (0.0) 4.5 (0.177) 12.7 (0.0) ssembly drawing ligner cover (0.311) 3.9 (0.153) ligner cover PRT NUMRS N IMNSIONS Insulation diameter of applicable wire φ0.5 to 0.65 mm φ0.5 to 0.65 mm φ0.5 to 0.65 mm φ0.5 to 0.65 mm φ0.5 to 0.65 mm φ0.5 to 0.65 mm N-247R020-G/ N-247R026-G/ N-247R0-G/ N-247R0-G/ N-247R0-G/ N-247R080-G/ (0.8) (0.986) (1.2) (1.586) (2.0) (2.3) (0.690) 21. (0.840) (1.090).60 (1.440) (1.890) (2.190) (0.651) 20. (0.801) (1.051) (1.401) (1.851) (2.151) (0.521) (0.671) (0.921) (1.271) (1.721) (2.021) (0.4) (0.600) (0.8) (1.200) (1.6) (1.9) -contact connectors for I of wires with φ0.8 mm (0.031 in.) to φ0.88 mm (0.035 in.) insulation diameter are also available. Specify a part number by replacing -G/ at the end with -G/. imensions are in millimeters (inches) 5
6 RIGHT-NGL SOKT [LIGHTWIGHT TYP] IMNSIONS 6.2 (0.244) 2.7 (0.106) No.1 No (0.0) 0.4 (0.015) 1.27 (0.0) 9.4 (0.370) M2.5 (0.098) 5.2 (0.204) 8.61 (0.338) 11.5 (0.452) 0.3 (0.011) 1.3 (0.051) M2.5 (0.098) 3.9 (0.153) MOUNTING HOL LYOUT (OMPONNT SI) ±0.1 (±0.004) 1.27 ±0.1 (0.0 ±0.004 ) ±0.1 (±0.004) 1.27 ±0.1 (0.0 ±0.004 ) No.1 No.2 No.3 φ 0.8 ±0.06 (0.031 ±0.002 ) 2 φ 2.8 ±0.1 (0.110 ±0.004 ) No.1 No.2 No.3 φ 0.8 ±0.06 (0.031 ±0.002 ) ±0.1 (±0.004) ±0.1 (±0.004) 2 φ 2.8 ±0.1 (0.110 ±0.004 ) PTTRN INHIIT RS ROMMN PNL IMNSIONS ±0.1 (±0.004) ( + 0.5) ±0.1 (( ) ±0.004 ) R1.5 ±0.1 (R0.059 ±0.004 ) ±0.1 (±0.004) Recommended panel thickness t = ±0.1 (0.318 ±0.004 ) PRT NUMRS N IMNSIONS N-24-L/L N-24-L/L (0.8) (1.200) (0.929) 32. (1.279) (1.047) 35. (1.397) (1.480) 46. (1.830) (1.712) (2.062) (1.317) (1.667) This socket is 40% lighter than a socket with die cast shell. imensions are in millimeters (inches) 6
7 MI/S RSISTNT OVR IMNSIONS ssembly drawing of cover φ Outer cover able clamp Pan head machine screw Latch 42 (1.653) Inner cover (2) 11.5 Inner cover (1) (0.452) olor: Sand beige PRT NUMRS N IMNSIONS N /S N /S N-2400-/S N-2400-/S N-2400-/S N-2400-/S N /S (0.785) (0.935) (1.185) (1.535).43 (1.985) (2.285) (1.167) (1.317) (1.7) (1.917) (2.7) (2.667) 34. (1.358) (1.8) (1.259) (1.259) (1.259) (1.259) 6.8 (0.2) 7.1 (0.280) 8.2 (0.323) 9.0 (0.354) 9.8 (0.386) 9.1 (0.358) 9.7 (0.382) *: The standard color of the MI/S resistant covers is sand beige, but black, ivory, and art gray are also available. Specify a part number as follows: lack: N /S-K0. Ivory: N /S-0. rt gray: N /S-0. :. : over type. WI-HOL OVR OR SSI LS IMNSIONS able inlet 38.2 (1.4) 19.7 (0.776) 12.4 (0.488) 42.0 (1.654) 33.0 (1.299) 18.5 (0.728) 16.5 (0.6) 49.9 (1.964) 11.5 (0.453) olor: Sand beige PRT NUMRS N IMNSIONS N-2400-/S N-2400-/S able inlet R5.5 R4.7 *: The standard color of the MI/S resistant covers is sand beige, but black, ivory, and art gray are also available. Specify a part number as follows: lack: N /S-K0. Ivory: N /S-0. rt gray: N /S-0. :. : over type. imensions are in millimeters (inches) 7
8 MI/S RSISTNT OVR, LTH-ON-HOO TYP IMNSIONS φ Outer cover able clamp Pan head machine screw Latch 42 (1.653) Innner cover (2) Innner cover (1) PRT NUMRS N IMNSIONS N-2400-/S N-2400-/S N-2400-/S (1.146) (1.496) (1.567) (1.917) (1.259) (1.259) 8.2 (0.223) 9.0 (0.223) 9.8 (0.223) 11.5 (0.223) 11.5 (0.223) 11.4 (0.223) imensions are in millimeters (inches) 8
9 SSORY (UST P OR SOKT) (230R SRIS N 240R SRIS) Used to prevent dust from entering the contact section of a plug connector. IMNSIONS (0.1) 1.3 (0.051) 1 (0.039) 9.1 (0.358) 4-R2 Material: Polypropylene olor: Sand beige (0.311) PRT NUMRS N IMNSIONS 28 N N N N (1.406) 40.8 (1.606) 49.7 (1.957) 61.1 (2.406) 30.1 (1.185) 35.2 (1.386) 44.1 (1.7) 55.5 (2.185) PPLITIONS N-23 -G/ N-24 -G/ ust cap N imensions are in millimeters (inches) 9
10 L SSMLY TOOLS The following tools are needed to assemble N-230/230R/240/240R series connectors. able aligner (semiautomatic cable aligner or hand tool) I tool 1. able ligner Item ody/ontroller Semiautomatic cable aligner ed daptor Hand tool N-237J N-K560--xxx N-237R N-247J N-M561-/ N-P560-2/ N-K560-R-xxx N-K560-K-xxx N-237T-T062/H N-247R N-P560-2/J N-K560-J-xxx N-247T-T061/H xxx indicates the number of. 2. Insulation isplacement onnection (I) tool Item N-237J N-237R N-237 N-247J N-247R N-247 Hand press N-237T-T109/H Head/Table N-237T-T064/H N-237T-T067/H N-237T-T075/H N-247T-T066/H N-247T-T0/H N-247T-T077/H able aligner Insulation displacement connection (I) tool imensions are in millimeters (inches) 10
11 Semi-utomatic Tools able ligning Machine Main ody (N-M , N-M ) over 2 over 1 Wires lamp lever pplicator Sinking comb lamp section pplicator Stand able key ed 1. Set the applicator on the stand. Set covers 1 and 2 in the applicator. 2. Push the wire into the sinking combs. 3. Set the applicator onto the installation table and begin cable alignment Head (N-H5-1/) Stand (N-5) Lock Lever Handle Guide Stopper pplicator (N-5-1/-xxx) I Tool (N-237T-T109/H, N-237T-T067/H locator) 4. Take the covers off the applicator. 5. Put covers together and pre-assemble them to the connector body. 6. onduct final aaembly as shown. N-240R SRIS I ROUN-L ONNTORS SOKT: N-247R***-G/ (***: 020, 026, 0, 0, 0,080) Pos No. pplied Wire (wire ia.: mm) onnector Part number Hand Tool able ligner Semi-uto I Tool 20 #28 to #30 (0.5 to 0.65) N-247R020-G/ N-247R080-G/ N-247T-T061/H (See below* ) HN PRSS: N-237T-T109/H H & Locator: N-237T-T067/H Semi-automatic-Medium Level ody: :N-M Head ssembly: :N-H5 pplicator: :N-5-1/J-***(***: 020, 028, 0, 0, 0, 080) Stand: :N-5 imensions are in millimeters (inches) 11
12 ujitsu omponents International Headquarter Offices Japan ujitsu omponent Limited Gotanda-huo uilding 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo , Japan Tel: (81-3) ax: (81-3) mail: Web: North and South merica ujitsu omponents merica, Inc. 2. aribbean rive Sunnyvale, U.S.. Tel: (1-408) ax: (1-408) mail: Web: urope ujitsu omponents urope.v. iamantlaan WV Hoofddorp Netherlands Tel: (31-23) ax: (31-23) mail: Web: emea.fujitsu.com/components sia Pacific ujitsu omponents sia Ltd. 102 Pasir Panjang Road #01-01 itilink Warehouse omplex Singapore Tel: (65) ax: (65) mail: ujitsu omponents merica, Inc. ll rights reserved. ll trademarks or registered trademarks are the property of their respective owners. ujitsu omponents merica, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, ujitsu omponents merica, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, imensions are in millimeters (inches) 12
FOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with to 96 contacts are available for various
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS)
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp type connectors) are designed for a wide range of uses. 1-row and 2-row types are available to allow various
SCA.1, SCA. 2 INTERFACE CONNECTOR
SCA.1, SCA. 2 INTERFACE CONNECTOR 240 SERIES (SCA) FEATURES Half pitch connector conformed to SCA system (80 pins). Add mating guide and ESD protection to do plug-in safety and reliability (They are newly
PC BOARD MOUNTING CONNECTORS
PC BOARD MOUNTING CONNECTORS 720 SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp connector) are designed for a wide range of uses, and come in many shapes, two contact arrangements
Memory card connectors
Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT Features The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer
RECTANGULAR CONNECTORS
RETANGULAR ONNETORS FN-360 SERIES FEATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, P board mounting, and insulation displacement
FBR211 SERIES 1 POLE MINIATURE RELAY. 1 to 2 A (FOR SIGNAL SWITCHING) 1 to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS)
MINIATURE RELAY POLE FBR2 SERIES to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS) 2 A maximum carrying current Capable of 2 A maximum continuous carrying
COMPACT POWER TWIN RELAY. 1 POLE x 2 30A (Dual relay) (FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER TWIN RELAY POLE x 2 3A (Dual relay) (FOR AUTOMOTIVE APPLICATIONS) FBR2, 22 SERIES FEATURES DISCONTINUED (2) Two independent relays mounted in a single package Miniature size (4% of the volume
MAXIMUM LOAD CURRENT 1 A. 3 : 3 VDC (only AC type) 5 : 5 VDC 12 : 12 VDC 24 : 24 VDC A : AC type D : DC type
SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A FEATURES UL, CSA recognized Extremely small and light weight Size: 10.0 (W) 20.2 (L) 12.8 (H) mm Weight: approximately 5.5g High reliability, long life and maintenance
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES RoHS compliant FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL pitch terminals
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) VSB SERIES FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
2 POLE 5A/TV-3 RATED COMPACT TYPE
POWER RELY POLE /TV-3 RTED COMPCT TYPE FTR-F Series RoHS compliant FETURES Small high density type relay mm save % compared to VB UL/CS/VDE/SEMKO/CQC approved Insulation distance: minimum mm between coil
NA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS Compliant FEATURES Slim type relay for high density mounting Conforms to Bellcore specification and FCC Part 68 Dielectric strength 1,500 VAC
FBR46 SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. High surge
FRL-274 SERIES 1 POLE 12, 30, 40 A HIGH POWER RELAY (FOR AUTOMOTIVE APPLICATIONS) FEATURES ORDERING INFORMATION
HIGH POWER RELY POLE 2, 30, 40 (FOR UTOMOTIVE PPLICTIONS) FETURES High current switching and carry by using new conductive materials. Suitable for automotive applications such as BS, power assisted steering,etc.
POWER RELAY. FTR-K3-WG Series. 1 POLE - 25A - 1.5mm contact gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 25A - 1.5mm contact gap FTR-K3-WG Series FEATURES 1 pole, 25A 1 Form A Contact gap 1.5mm Surge strength (B/T open contacts) 2.5kV Compliance with European photovoltaic
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES Lead Free / RoHS compliant* FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL
To be Discontinued FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
FTR-P1 SERIES 1 POLE 20 A QUIET POWER RELAY (FOR AUTOMOTIVE APPLICATIONS) FEATURES ORDERING INFORMATION
QUIET POWER RELAY POLE A (FOR AUTOMOTIVE APPLICATIONS) FTR-P SERIES FEATURES Original construction, where reduction of operational noise is considered when mounted on PCB, made it possible to design this
POWER RELAY. FTR-K3-WS Series. 1 POLE - High Capacity 25A Type FTR-K1 SERIES FEATURES
POWER RELAY 1 POLE - High Capacity 25A Type FTR-K3-WS Series FEATURES 1 pole, 25A 1 form A contact Wide contact gap: 1.8mm Dielectric strength (B/T open contacts) 2.5kV Compliant with European photovoltaic
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. POWER RELAY 1 POLE 3,, 1 A FBR16 SERIES FEATURES Compact with high power (3
MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay
VE 12 H M S E K HV VD (a) ( * ) (b) (c) (d) (e) (f) (g) (h) (i)
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) VE SERIES Lead Free FEATURES UL, CSA, VDE recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in small package
COMPACT POWER RELAY 1 POLE 25 A FOR AUTOMOTIVE APPLICATIONS
COMPACT POWER RELAY POLE 5 A FOR AUTOMOTIVE APPLICATIONS FTR-P3 Series FEATURES Compact for high density packaging. (65% volume of previous generation FBR 5/5 Series). High contact capacity with proven
DISCONTINUED (1998) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR244 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY POLES to A (FOR SIGNAL SWITCHING) FBR44 SERIES FEATURES Gold-overlay bifurcated contact Contact material and shape especially suitable for signal switching; assures reliability at low level
(FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER RELAY POLE 2 A (FOR AUTOMOTIVE APPLICATIONS) FBR, 2 SERIES FEATURES Compact and lightweight structure (42% of the volume of the FBR relay) High current contact capacity (carrying current:
DISCONTINUED (2002) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES FEATURES Super miniature size: 0.2 inch 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom
Remote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
SY SERIES 1 POLE 1 A (FOR SIGNAL SWITCHING) MINIATURE RELAY SY SERIES. RoHS compliant
MINIATURE RELAY 1 POLE 1 A (FOR SIGNAL SWITCHING) SY SERIES RoHS compliant FEATURES Very small size and light weight UL, CSA recognized Conforms to FCC rules and regulations part 68 Dielectric strength
VF SERIES 1 POLE 20, 25, 30 A POWER RELAY (HEAVY POWER CONTROL) VF SERIES. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 20, 25, 30 A (HEAVY POWER CONTROL) VF SERIES RoHS compliant FEATURES UL, CSA, VDE recognized TV-15 rated 1 Form A (SPST-NO) contact Heavy duty 20 to 30 A small power relay High inrush
2 POLES 5 A LOW PROFILE TYPE
POWER RELAY POLES A LOW PROFILE TYPE FTR-F1 SERIES FEATURES Low profile power relay (height 1. mm) employing unique construction DPST/DPDT A, TV-3 rating available Higher isolation by employing reinforced
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) Lead Free FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) RoHS compliant FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
2 POLE 5A/TV-3 RATED COMPACT TYPE
POWER RELY POLE /TV-3 RTED COMPCT TYPE FTR-F Series RoHS compliant FETURES Small high density type relay mm save % compared to VB UL/CS TV-3 rating Insulation distance: minimum mm between coil and contacts
(FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER RELAY POLE 2 A (FOR AUTOMOTIVE APPLICATIONS) FBR, 2 SERIES FEATURES Compact and lightweight structure (42% of the volume of the FBR relay) High current contact capacity (carrying current:
2 POLES 8 A LOW PROFILE TYPE
POWER RELAY 2 POLES 8 A LOW PROFILE TYPE FTR-F1 R SERIES RoHS compliant FEATURES DPST/DPDT 8A Low profile power relay (height 16. mm) employing unique construction Higher isolation by employing reinforced
MINIATURE RELAY 2 POLES, 2A HIGH INSULATION/WIDE GAP FTR-C1 Series
MINIATURE RELAY 2 POLES, 2A HIGH INSULATION/WIDE GAP FTR-C1 Series RoHS compliant Features 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,00V between open contacts,000v between coil
QUADRAX CONNECTOR SERIES
ONNTOR SRIS or Shell Styles MIL-TL-8999/0 & 6 THNIL HRTRISTIS SPIITIONS Temperature Rating: -55 to + 5 orrosion: MIL-ST-0 Method 0, Test ondition Shock: MIL-ST-0 Method, Test ondition Vibration: MIL-ST-0
2 POLES 5 A LOW PROFILE TYPE
POWER RELAY POLES A LOW PROFILE TYPE FTR-F1 SERIES RoHS compliant FEATURES Low profile power relay (height 16. mm) employing unique construction DPST/DPDT A, TV-3 rating available Higher isolation by employing
ultra MINIature 2-POLes 2a (LOW PrOFILe signal relay) Ftr-B3 series rohs compliant Features
ULTRA MINIATURE -POLES A (LOW PROFILE SIGNAL RELAY) FTR-B3 SERIES RoHS compliant Features DPDT C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight:.85g, Mounting
TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N
![TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N](/thumbs/84/91187989.jpg "TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N")
TEL:-3349 FAX:-332E-MAIL: szss@3.com FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FBR2 SERIES FEATURES (FOR SIGNAL APPLICATIONS)
1 POLE 5,10, 16 A (TV-5 rated Cadmium free type) FTR-F2 / H2 / K2 Series
POWER RELAY POLE,, A (TV- rated Cadmium free type) FTR-F / H / K Series RoHS RoHS compliant compliant Features HIGH DENSITY MOUNTING mm height and 7mm mounting space HIGH ISOLATION Insulation Distance:
FTR-B4 Series ULTRA MINIATURE RELAY SLIM SIGNAL RELAY. RoHS Compliant FEATURES ORDERING INFORMATION
ULTRA MINIATURE RELAY SLIM SIGNAL RELAY Series FEATURES Ultra miniature slim type relay for surface mounting Height: 9. mm maximum (THT) mm maximum (SMT) Weight: Approximately. g UL/CSA recognized Conforms
1 POLE - 16A LOW PROFILE TYPE FTR-K1 Series
POWER RELAY FTR-K1 SERIES 1 POLE - 16A LOW PROFILE TYPE FTR-K1 Series RoHS compliant FEATURES Low profile (height: 15.7mm) HIGH ISOLATION5 Insulation Distance (between coil and contacts: 10mm min.) Dielectric
DISCONTINUED (2008) 4 Pole (2 FORM C+ 2 FORM A) Signal Relay for Central Switching/ Data Transmission FTR-B2 SERIES. RoHS compliant FEATURES
4 Pole ( FORM C+ FORM A) Signal Relay for Central Switching/ Data Transmission FTR-B SERIES RoHS compliant FEATURES DISCONTINUED (8) 4 POLE MINIATURE RELAY Mounting space of 17mm with 4 pole relay, suitable
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) JS SERIES FEATURES Lead Free / RoHS compliant* UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (10 C) insulation 1 form A (SPST-NO) or 1 form
PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)
![PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)](/thumbs/83/88064178.jpg "PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)")
POWER RELAY 1 POLE - 16A/12A/10A Transparent cover FTR-K1 Series FEATURES 16A, 12A, 10A versions Transparent cover Low profile (height: 15.7mm) High insulation Insulation distance (between coil and contacts):
1 POLE 5,10 A (CADMIUM FREE CONTACTS TYPE) FTR-F2 /H2 SERIES
POWER RELAY POLE, A (CADMIUM FREE CONTACTS TYPE) FTR-F /H SERIES RoHS compliant Features HIGH DENSITY MOUNTING Saves space by % compared to FTR-H type. HIGH ISOLATION Insulation Distance: Minimum mm between
MINIATURE LOW NOISE RELAY
MINIATURE LOW NOISE RELAY POLE - 5A (For V car battery) FTR-P7 Series FTR-K SERIES FEATURES Miniature size, form C Low noise (average acoustic noise level: 5dB, distance 5cm) High contact capacity (5A,
RELAYS Solar Energy Systems
RELAYS Solar Energy Systems FUJITSU COMPONENTS CONTENTS Fujitsu relays for solar applications DC voltage versions - AC voltage versions - Latching versions RELAY PRODUCT LINE UP - SOLAR ENERGY SYSTEMS
22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/85/92583829.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
![lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.](/thumbs/80/80818919.jpg "lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.")
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
1 POLE - 1 to 2A (For Signal Switching)
MINIATURE RELAY 1 POLE - 1 to A (For Signal Switching) SY Series FEATURES Very small size and light weight UL, CSA recognized Conforms to FCC rules and regulations part 68 Dielectric strength 00 VAC between
COMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY For automotive applications POLE - 6A (For 2V Car Battery) FBR59-HW Series FEATURES pole, 6A, form U High temperature grade (-4 C to 25 C) Comparable capability with Power Mini
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
Contacts, Tools, and Accessories
ontacts, Tools, and ccessories able reduction sleeve REDUTION SLEEVEs FOR BLE Reduction Sleeve Length for use with Mechanical able lamp or Basketweave able Grip Shell Sleeve P/N Sleeve inner diameter [mm]
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Push-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
WIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
For more information, please visit or call toll free at
GT3 GT3 Key features: 4 selectable operation modes on each model External start, reset, and gate inputs Panel mount or socket mount Large variety of timing functions and output status indicating LEs UL,
COMPACT POWER RELAY. FBR51, 52 Series. 1 POLE - 25/30A (For automotive applications)
COMPACT POWER RELAY POLE - 2/3A (For automotive applications) FBR, 2 Series FEATURES Compact and light weight structure High current contact capacity (carrying current: 3 A/ minutes, 3 A/ hour) High resistance
POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)
![POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)](/thumbs/82/85798757.jpg "POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)")
FTR-K SERIES POWER RELAY POLE - 0A Relay Type FTR-H Series FEATURES High density mounting Saves space by 6% compared to FTR-H type High insulation Insulation distance: minimum 6mm between coil and contact
Low Profile R/A type Board to Cable connector (SGC and Discrete wire)
Low Profile R/ type oard to able connector (S and iscrete wire) Height at mating with vertical receptacle and Right ngle plug is 4.mm PTNT PNIN PL SRIS able assembly by blanket soldering with different
CDSOT23-T24CAN-Q CANbus Protector
*RoHS & OMPLINT eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* n -Q101 compliant**
D Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
Gecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
Commercial Micro-D Subminiature I/O Products
Subminiature I/O Products requiring the density of a microminiature connector Designed In: Inches Packaging: Tube Mates With: 83421, 83422, 83424 PCB Thickness: 1.60mm (.062 ) Lead Free Process Capability:
DSD-40BCD Series Miniature 4½ Digit, BCD Input, Slave LED Display
www.murata-ps.com S-40 Series TURS Low cost! omplete! No external components required Rugged, epoxy-encapsulated package Ideal for computer-based instruments Miniature size: 2.7" x 0.92" x 0.56" 55mm x
uk.rs-online.com (UK) (International)
Thermocouple onnector Selection Guide uk.rs-online.com (UK) www.rs-components.com (International) International Thermocouple olour odes for onnector odies ll thermocouple connectors use true thermocouple
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
Rack and Panel Connectors Military, MIL-C-28748/7/8 Qualified Microminiature Rectangular with Optional Hoods
MIL--28748/7/8 Vishay ale Rack and Panel onnectors Military, MIL--28748/7/8 Qualified Microminiature Rectangular with Optional Hoods FTURS Qualified to MIL--28748/7/8 Solder cup contacts Fixed and turnable
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
D Subminiature Connectors
Subminiature onnectors Subminiature ontents The ITT annon Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution
How to Order Manifold. Manifold mounting. DIN rail mounting style Direct mounting style
Plug Lead Unit Series 000 [Option] How to Order Manifold S 0 FD D Electrical entry F kit D-sub connector kit P kit Kit type Flat ribbon cable connector kit J kit Flat ribbon cable (0P) (PC Wiring System
CDSOT23-T24CAN CANbus Protector
*RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
TNC Connectors. General Description. TNC Configurations. TNC Specifications* Plug Interface** Jack Interface**
TN onnectors General Description Delta TN connectors are compact, 50 Ω impedance connectors with 7 16-28 threaded coupling, similar in size to N connectors but with better electrical characteristics. They
Assembly Procedures for 96-Position GPEC II and III Sealed Connector System (Harness)
Assembly Procedures for 96-Position GPEC II and III Sealed Connector System (Harness) Instruction Sheet 408-10229 08 SEP 17 Rev E Wire Dress Assembly (Straight Version) Plug Housing Assembly Optional Blink
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
Small Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
9-Pin D-type Connection Accessories
-Pin D-type onnection Accessories 0-00D y Standard Voltage and alibration Port Solutions y Standard Voltage to 0V A/00V, A y ating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
Reflow Technology Product Overview
Reflow Technology Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.
78-Way D-type Connector Accessories
-Way D-type onnector Accessories 0-00D y Standard Voltage to V A/0V, A y Mating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed ompatibility The Standard Voltage -Way D-Type
CDNBS08-SLVU Low Capacitance TVS Array
*RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation
BNC Connectors. General Description. BNC Configurations. BNC Specifications* Plug Interface** Jack Interface**
N onnectors General Description Delta N connectors are compact, economical, 50Ω impedance connectors with two-stud bayonet coupling. They are best suited for use with cables in the range of.150" to.50"
Hi Density Card Connector SPECIFICATIONS: STANDARD MATERIALS AND FINISHES
Hi Density ard onnector SPEIFITIONS: The micro-miniature card connector series 106 is designed for a space conscious industry. The hi-density card configuration connector provides an extremely dense and
JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
3M Power Clamp Wiremount Connectors
Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:
SMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
711 Series Single Way DB-1a
711 Series Single Way DB-1a Data Bus Interconnection System Data Bus Interconnection System designed for data transmission as defined by MIL-STD-1553B, STANAG 3838 and DEF STAN 00-18 (Part 2). This system
SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3
C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations