78-Way D-type Connector Accessories
|
|
- Ashlee Elliott
- 5 years ago
- Views:
Transcription
1 -Way D-type onnector Accessories 0-00D y Standard Voltage to V A/0V, A y Mating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed ompatibility The Standard Voltage -Way D-Type connector is used on PXI and LXI switching products to provide a medium density user connector solution. has developed a full range of standard connection solutions to simplify the task of integrating products into a test system. For users wishing to develop their own cabling solutions, we offer mating connectors and connector hoods which allow users to create either their own cable based solutions, or a PB header solution. onnector Blocks directly terminate the module connector and convert the connection to arrays of screw terminal blocks, or users can select to use a remote DIN rail mounted breakout to terminate the cables at the end of a cable assembly. onnector to onnector cable assemblies provide a simple way of connecting the product to the user s remote matching connection. onnectors to unterminated solutions allow the user to connect directly to the product connector and wire directly into a remote UUT. able assemblies are offered in various lengths to match most user requirements. can manufacture custom connector accessories to suit any application, if you do not see what you need then contact your sales office with information on your requirements and let us solve your connection problems. ISSUE. Feb Page
2 ONTENTS STANDARD VOLTAGE - onnectors / onnector Blocks VIEW DESRIPTION TYPE GENDER PART No. PAGE PB onnector Way D-Type, A Right Angle PB Mount Straight PB Mount --0-RF --0-RM --0-SF --0-SM Page Page able onnector Way D-Type, A, Solder Bucket With Backshell Without Backshell With Backshell Without Backshell --0-F --0-F --0-M --0-M Page Shielded onnector Block, Way D-Type, A, Screw Terminal. With Backshell Without Backshell With Backshell Without Backshell --0-F --0-F --0-M --0-M Page Breakout with DIN Rail Mount, Way D-Type, A, Screw Terminal --0-F --0-M Page STANDARD VOLTAGE - able Assemblies VIEW DESRIPTION END END PART No. PAGE able Assy, Way D-Type, A, 0.m, m and m ustom lengths by quotation -0-0-*m-FF -0-0-*m-MM -0-0-*m-MF Page able Assy, Way D-Type to Unterminated, A, 0.m, m and m ustom lengths by quotation Unterminated with Options Unterminated with Options --0-*m-FU A0HF-*-0A*** --0-*m-MU A0HM-*-0A*** Page USTOM TERMINATION Page 0 Please use the hyperlinked text to navigate to the data sheet page required. Return to this page via the button. Page
3 PB Interfacing - Way D-Type onnector Standard Voltage y Right Angle PB Mount y and Versions Available y Ideal for User reated Termination Solutions This accessory allows a user to create their own PB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PB s should be designed with suitable clearances for the voltage the application requires version depicted 0.00 (.) (.). (0.) 0.0 (.) PB Footprint of -Way Right Angle onnector (onnector Side - Not to Scale) 0.0 (.) Typ 0.00 (.) 0.0 (.) Mating Face of onnector this side of footprint 0.00 (.) 0.00 (.) onnector Type: Mounting Effective Leg Length able Securing Method onnector Type: urrent Rating ontact Material ontact Resistance version depicted PB not supplied Way D-Subminiature, or female Right angle PB mount,0mm nom (See diagram) - UN screwlocks A each pin V A <mohm Way connectors can be directly mated to a corresponding Pickering Switching Module. Effective Leg Length E PB Footprint of -Way Right Angle onnector (onnector Side - Not to Scale). (.). (0.) 0.0 (.) 0.00 (.) Length Product Order odes 0.00 (.) 0.0 (.) Typ 0.00 (.) 0.0 (.) Mating Face of onnector this side of footprint 0.00 (.) Way D-Type onnector, A, Right Angle PB Mount --0-RF --0-RM Page
4 PB Interfacing - Way D-Type onnector Standard Voltage y Straight PB Mount y and Versions Available y Ideal for User reated Termination Solutions Ideal for user created termination schemes where the termination is to be on the front or remotely connected to the module by cable. Suitable cables for this product are contained elsewhere in this data sheet. Interfacing PB s should be designed with suitable clearances for the voltage the application requires., ± 0,, ± 0,, ± 0,, ± 0, -way D-Type, Straight PB Mount onnector Footprint For --0-SM (onnector Side - Not to Scale), ± 0,0 ø, ± 0, (x) 0, 0, + ø - 0 (x) +0, 0 0 0, - 0,, ± 0,0, ± 0,0 0, ± 0, PB Footprint of -Way Straight onnector -way D-Type, Straight PB Mount onnector Footprint For --0-FM (onnector (onnector Side - Side Not - Not to to Scale) ø, ± 0, (x) 0, + 0, - 0 (x) ø +0,, - 0, 0 0, ± 0,0, ± 0,,0 ± 0,,0 ± 0,,0 ± 0,,0 ± 0,,0 ± 0,,0 ± 0, onnector Type: Mounting Effective Leg Length able Securing Method onnector Ratings: urrent Rating ontact Material ontact Resistance version depicted PB not supplied Way D-Subminiature, or female Straight PB mount,0mm nom (See diagram) - UN screwlocks A each pin V A <mohm Way connectors can be directly mated to a corresponding Pickering Switching Module. PB Footprint of -Way Straight onnector -way D-Type, Straight PB Mount onnector Footprint Effective Leg Length For --0-SM (onnector (onnector Side - Side Not - Not to to Scale) Effective Leg Length, ± 0,, ± 0, Page, ± 0,0 ø, ± 0, (x) 0, + 0, - 0 (x) ø +0,, - 0,, ± 0,0, ±,0 Legs, ± 0, Legs -way D-Type, Straight PB Mount onnector Footprint For --0-FM (onnector Side - Not to Scale),0 ± 0,,0 ± 0,,0 ± 0, Product Order odes Effective Leg Length Way D-Type onnector, Effective A, Leg Straight Length PB Mount --0-SF --0-SM Length Length Length Length
5 able onnection - Way D-Type onnector Standard Voltage y onnector Only or onnector and Backshell y Solder Bucket able Termination y able lamp in Backshell Suitable for users to create their own cable assemblies, can be supplied with or without their backshell. Recommended for use with PFA coated Amp cable onnector Type: Securing Method able Exit Overall Size (Approx) onnector Ratings: urrent Rating ontact Material ontact Resistance Insulation Resistance able onnection: Recommended able onnection Method able lamp Way D-Subminiature, or female - UN screwlocks mm dia H x W. x Dmm A V A mohm 000MOhm PFA /0. (AWG) 0.mm OD Solder bucket Yes (in backshell) Way cable connectors can be directly mated to a corresponding Pickering Switching Module. Product Order odes Way D-Type onnector, A, Solder Bucket, With Backshell, --0-F With Backshell, --0-M Without Backshell, --0-F Without Backshell, --0-M Page
6 Direct onnection - Way D-Type onnector Block onnector blocks provide a convenient method of termination without the use of custom cabling. However, a higher resistance path, lower capacity ratings and lower voltage ratings are typical. y onnector and PB Only or onnector, PB and Backshell y and Versions Available y able lamp in Backshell y Easy to Use Rising age Screw Terminals Suitable for use on the front of Pickering modules this connector block provides a simple method of connecting to high density Way D-Type connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. The metal shell includes an internal insulation barrier under the carrier board. Standard Voltage onnector Block urrent Rating Securing Method able Exit Overall Size (Approx) Main onnector: Type urrent Rating ontact Material ontact Resistance Wire/able onnection: onnection Method Recommended Wire/able Recommended Wire Size Torque Setting able lamp A 0V D - UN screwlocks 0 x mm H x W x D00mm Way D-Subminiature, or female A V A <mohm Rising cage screw terminals PTFE type Up to.mm csa (AWG) 0.-0.Nm Yes (in backshell) versions are suited to direct connection to a Pickering Switching Module while male versions can be used to interface to a female cable assembly termination...0. Product Order odes. --0-F. 0.0 Way D-Type onnector Block, A, Screw Terminal With Backshell, --0-F With Backshell, --0-M Without Backshell, --0-F Without Backshell, --0-M Page
7 able onnection - Way D-Type Breakout Standard Voltage onnector blocks provide a convenient method of termination without the use of custom cabling. However, a higher resistance path, lower capacity ratings and lower voltage ratings are typical. y For onnection at able End y Simple to Use Rising age Screw lamp Termination mm y DIN Rail Mounted 0mm 0mm Suitable for use at the end of a mating cable remote from the product and on DIN rails this termination option is capable of accepting heavy duty connection wires and uses rising clamp screw terminals to minimize the danger of copper strand damage M onnector Block urrent Rating Securing Method Overall Size (Approx) Main onnector: Type urrent Rating ontact Material ontact Resistance able Securing Method Wire/able onnection: onnection Method Recommended Wire/able Recommended Wire Size Torque Setting able lamp Product Order odes A 0V D Suitable for securing to DIN rails. H0 x W0 x Dmm Way D-Subminiature,. or female A V A <mohm - UN screwlocks Rising cage screw terminals Any (user defined) Solid wire up to mm csa (>AWG) 0.-0.Nm No --0-F Way D-Type Breakout with DIN Rail Mount, A, Screw Terminal, --0-F Screw Terminal, --0-M Page
8 Way D-Type onnector to onnector Assembly Standard Voltage y High Specification able y Highly Flexible able y Strain Relief y Braided Sleeving y Fully Screened able onstruction The Way connector option of this cable assembly is suited for direct connection to products haracteristic Plots for -0-0-m mm Minimum cabinet door closure allowance for cable bend. able Assembly Rating: Maximum urrent Maximum Voltage Standard Lengths Door losure Allowance onnector Type (End A): urrent Rating ontact Material ontact Resistance Product Securing Method Overall Size (Approx) onnector Type (End B) able Type: onductors: Material Strands Resistance Screened onstruction Insulation Outer Sleeve Additional Braided Sleeve able O/D Minimum Bend Radius Other cable lengths can be supplied. A V A / 0V D Multiples of 0.m mm (see diagram) Way D-Subminiature, or female A V A / 0V D mohm - UN screwlocks H x W. x Dmm As End A or female Individual wires, screened & sleeved Silver plated copper wire /0. (0.mm, AWG) 0.Ω/m Yes PFA Polyester Yes mm mm 0., or metres (as specified) Top graph shows the permitted ΣI versus ambient temperature in accordance with EN00 for user exposure to surface temperature and a higher limit imposed by the materials used where the cable is not directly user accessable. Bottom graph shows allowed current versus temperature assuming ALL wires carry the same current. Higher currents to the cable rating are permitted on individual wires provided the ΣI is complied with. Product Order odes Way D-Type able Assy, A, to 0.m Long m-FF.0m Long -0-0-m-FF.0m Long -0-0-m-FF Way D-Type able Assy, A, to 0.m Long m-MM.0m Long -0-0-m-MM.0m Long -0-0-m-MM Way D-Type able Assy, A, to 0.m Long m-MF.0m Long -0-0-m-MF.0m Long -0-0-m-MF Page
9 Way D-Type onnector to Unterminated Standard Voltage y High Specification able y Highly Flexible able with Screened onstruction, Braided Sleeve and Strain Relief y Fully oded Markers to Ensure Easy onnection y Boot Lace Ferrules to Prevent Wire Strand Breakage as Option The cable assembly is suited for direct connection to products using the pin D-Type connector with unterminated connections at the other end. The unterminated connections are coded to match the connector pin designation. An option includes crimped on ferrules to ensure the wire strands cannot break when terminated haracteristic Plots for --0-m mm Minimum cabinet door closure allowance for cable bend. 0., or metres (or as specified) Separate ores able Assembly Rating: Maximum urrent Maximum Voltage Standard Lengths Door losure Allowance onnector Type (End A): urrent Rating ontact Material ontact Resistance Product Securing Method Overall Size (Approx) Unterminated End (End B) Free Wire Length Wire oding Wire End Options able Type: onductors: Material Strands Resistance Screened onstruction Insulation Outer Sleeve Additional Braided Sleeve able O/D Minimum Bend Radius Other cable lengths can be supplied. A V A / 0V D Multiples of 0.m mm (see diagram) Way D-Subminiature, or female A V A / 0V D mohm - UN screwlocks H x W. x Dmm 0mm nominal Yes - To connector pins Ferrules, ut end or Tinned Individual wires, screened & sleeved Silver plated copper wire /0. (0.mm, AWG) 0.Ω/m Yes PFA Polyester Yes mm mm Product Order odes Way D-Type able Assy, A, Boot Lace Ferrules to Unterminated, 0.m Long m-FU to Unterminated,.0m Long --0-m-FU to Unterminated,.0m Long --0-m-FU Way D-Type able Assy, A, Boot Lace Ferrules to Unterminated, 0.m Long m-MU to Unterminated,.0m Long --0-m-MU to Unterminated,.0m Long --0-m-MU Top graph shows the permitted ΣI versus ambient temperature in accordance with EN00 for user exposure to surface temperature and a higher limit imposed by the materials used where the cable is not directly user accessable. Bottom graph shows allowed current versus temperature assuming ALL wires carry the same current. Higher currents to the cable rating are permitted on individual wires provided the ΣI is complied with. Part numbers for ut End and Tinned End options: A0H*-*-0A*** End A F = M = End B = ut End T = Tinned End able Length 0 = 0.m 00 =.0m 0 =.0m Page
10 ustom Termination are able to manufacture custom built cable assemblies and backshells that mate with all the connectors we use in our extensive product range and to provide connection solutions for third party products. We are able to model and manufacture cable assemblies and other termination arrangements to user notes and drawings, and to deal with simple and complex assemblies and both small and high volume orders. All products are designed to ensure easy and problem free connection. We offer a fast turn round of custom items to keep your ordering and integration timescales to a minimum. Design you own cable assembly online See pickeringtest.com Page 0 Page
9-Pin D-type Connection Accessories
-Pin D-type onnection Accessories 0-00D y Standard Voltage and alibration Port Solutions y Standard Voltage to 0V A/00V, A y ating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed
More information90-011D. RF Cable Assemblies. Pickering Interfaces. pickeringtest.com. pickering
pickering Pickering Interfaces 90-011D 2 RF Assemblies y Range of 50 and 75 Ohm Assemblies y Wide Variety of onnector Styles y Available in Standard and ustom Lengths To complement our extensive range
More informationMale Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
More informationP3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
More informationboth pin and sleeve contacts.
The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick
More informationHARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
More informationThrough and Ground Conductor Terminal Blocks 290 Series
11 474 Through and Ground Conductor Terminal Blocks 290 Series 0.34-1. mm"f-st" 0.31-1 mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / 0.197 in 0.34-1. mm"f-st"
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationC240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
More informationStripping. Contents. Stripping. Stripping Introduction C.2 C.1. Stripping and cutting tools C.4. Stripping tool C.10
ontents Introduction.2 and cutting tools.4 tool.0 tool for coaxial cable.2. Introduction After a conductor has been cut it is then prepared for the next step or for crimping. For this purpose, a specific
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationSECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
More informationMULTI CONNECTION SYSTEM. Product Overview
MULTI CONNECTION SYSTEM Product Overview THE ENTIRE RANGE OF MCS CONNECTORS MICRO Pin spacing: 2. mm Conductor sizes: 0.08 0. mm 2 (28 20 AWG) The Most Compact MCS MICRO Connector System with CAGE CLAMP
More informationSECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
More informationAmphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications
Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems
More informationBroadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
More informationThe shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications.
The shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications. Shield (Screen) Connecting System VOLUME 1 Shield (screen) connecting system
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationSERIES SMB SUBMINIATURE CONNECTORS
SERIES SMB SUBMINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE The HUBER+SUHNER subminiature connectors Series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More informationContents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES
Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................
More informationATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications.
ATBTK-MF-4G Bias Tee Kit, AISG Compatible 698-2700 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface 7-16 DIN Female BTS Interface 7-16 DIN Male Dimensions
More informationHE Insert Series. Application Specification Apr 26 th, 2016 Rev. A. Table of contents
HE Insert Series Table of contents 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3. Application Specification... 2 2.4. Standards... 2
More informationCannon Trident Connectors
Contacts General recommendations for the selection of Trident contacts are listed below. Platings: Tin is recommended for most applications (with 50 or fewer mating cycles). It is cost effective and matches
More informationLow Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5 reliable performance, dependable service Replace traditional RG types for benefit of: lower loss better shielding > - 90dB Drop in replacement
More informationSMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
More informationRP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402 RF Connectors Technical Data Sheet PE4790 Configuration SMA Male Reverse Polarity Connector MIL-STD-348 50 Ohms Right
More informationMIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
More informationRF Microwave Standard Assemblies
RF Microwave Standard Assemblies RF Microwave Standard Assemblies 146 Q-Flex Series Specifications Q-Flex assemblies are a unique ALTERNATIVE to custom designed flexible coaxial cables.traditionally custom
More informationADVANCED GROUP. Pee-Series Series 12 KVDC. Introduction. Introduction
Introduction Introduction Pee-Wee is a series of subminiature, high voltage connectors and cable assemblies for use in high voltage applications where dense electronic packaging is required. Pee-Wee uses
More informationTechnical Information
UTO Series Technical Information Tooling... 2 Crimping Instructions... 3 Handle & Interchangeable Heads... 5 Extraction Tools... 6 Assembly Instructions... 7 1 Tooling Standard contacts Contact size #12
More informationISO VIEW OF AX SERIES XLR CABLE CONNECTOR
AX SERIES XLR CABLE CONNECTORS ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground
More information7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features
More informationOperating tools. with partially insulated shaft Type 1, 2 and 3 in set
Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More informationC195-SMQM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C195-SMQM-3M Product Classification Brand Product Series Product Type CNT-195 CNT Jumper with interface types SMA Male and QMA Male, 3M CNT CNT-195 Braided cable assembly General Specifications Body Style,
More informationGeneral characteristics and technical data Series VarioPro Basic
General characteristics and technical data Series VarioPro Basic Series Electrical values Operating voltage (DC) Test voltage (DC) 8 kv 12 kv Housing HV- 1-2 Insulation material Flammability class POM
More informationELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks
ELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks 221 SERIES LEVER-NUTS The Next Generation of Compact Splicing Connectors 221 SERIES LEVER-NUTS The Difference is Clear:
More informationLGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
More informationuk.rs-online.com (UK) (International)
Thermocouple onnector Selection Guide uk.rs-online.com (UK) www.rs-components.com (International) International Thermocouple olour odes for onnector odies ll thermocouple connectors use true thermocouple
More informationSeries 791 Connectors
Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5
More informationSTANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
More informationSpecifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21
M12 A-coding Specifications IEC 60 352-4 Approval A-coding acc. to IEC 61 076-2-101 Circular Connectors Technical characteristics M12 A-coding Type M12 A-coded HARAX M12-L 5 poles HARAX M12 L shielded
More informationC400-TMTM-30-X. Jumper Assembly Sample Label. Product Classification. General Specifications. Electrical Specifications
C400-TMTM-30-X Product Classification Brand Product Series Product Type CNT-400-FR CNT Jumper with interface types TNC Male and TNC Male, 9.14 m CNT CNT-400 Braided cable assembly General Specifications
More informationTNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4447 Configuration TNC Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency
More informationHARTING Han-Power T Solutions
HARTING Han-Power T Solutions Fields of Application HARTING industrial connectors are suitable in a wide variety of electronic and electrical applications. Power utilities Robotics Machine tool controls
More informationGecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
More informationJULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
More informationSECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3
C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
More information1/4" and 3.5 mm Phone Plugs
N Y S P r o d u c t G u i d e P l u g s 1/4" and 3.5 mm Phone Plugs NYS 204 NYS 208 NYS 224G NYS 225B Commercial 1/4" plugs and adapters All connectors acc. EIA RS-453 / IEC 60603-11 Short and long turned
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
More informationD-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
More informationFeed-through terminals
s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS
More informationFBT-195 TIMES MICROWAVE SYSTEMS
FBT-195 Engineered Products: FBT TM -195 Flexible Low Loss High Power Communications Coax Ideal for High Power Base Station Jumper Assemblies In-Building Plenum Feeder Runs Any High Power Low Loss RF cable
More informationCOAXIAL CABLE and FITTINGS SUMMARY RF CABLE ASSEMBLIES
SUMMARY RF CABLE ASSEMBLIES Custom Cable Assemblies Standard Cable Sets CABLE FITTINGS 7/8" Flexible Foam Dielectric, 50 Ohm Hoisting Stocking Grips 1/2" Flexible Foam Dielectric, 50 Ohm Bird-Proof Stainless
More informationProduct features and advantages
Product features and advantages Reliable power connection solution for Electric vehicle batteries Battery chargers Other DC voltage applications Operating voltage determined by housing color Simplifies
More informationRecommended clamp spacing for 1/4 coaxial cable
3.7.6.1 Recommended clamp spacing for 1/4 coaxial cable lamp spacing recommendation is based on the guidelines stated in EI Standard RS-222 (Structural Standards for Steel ntenna Towers and ntenna Supporting
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More informationISO VIEW OF AX SERIES XLR CABLE CONNECTOR
AX SERIES XLR CABLE CONNECTORS ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground
More informationC400-NMTM-1M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C400-NMTM-1M Product Classification Brand Product Series Product Type CNT-400 CNT Jumper with interface types N Male and TNC Male, 1m CNT CNT-400 Braided cable assembly General Specifications Body Style,
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More information7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment RF Connectors Technical Data Sheet PE44280 Configuration 7/16 DIN Male Connector MIL-C-39012 50 Ohms Right Angle Body Geometry Features Silver
More informationTRUtest Specifications. Electrical. Mechanical. Environmental. Requirement. Detail. 1.35:1 maximum. 0.4 db/ft GHz
TRUtest Series TRUtest Series cable assemblies combine MIL-standard test-grade interfaces with flexible and durable cable construction to provide repeatable, reliable performance and long service life.
More informationAEE. Canada. Australia
DMARCA DE CONFORMIDA CORDS & ELECTRICAL UNIVERSAL POWER JUMPER CORD INTERNATIONAL AGENCIES APPROVED 302 POWER JUMPER CORD APPLICATIONS: To Connect Accessories and Peripherals to Computers and Electronic
More informationMINI CIRCULAR DIN PLUGS
MINI CIRCULAR DIN PLUGS 7000 SERIES SERIES. Plug for Cable Solder! Available in 3, 4, 5, 6, 7, 8 and 9 circuits! Voltage rating: 50V AC/DC! With inner metal cover, strain relief cap and plastic hood! Current
More informationHARTING Han GND. People Power Partnership
98 42 937 0201 HARTING Han GND People Power Partnership Han GND - Mateable Potential Equalization The new Han GND series now enables pluggable grounding systems Han GND (Han Ground) is the innovative HARTING
More informationCRIMP CONNECTORS & ACCESSORIES Universal Crimp Termination System. Heavy-duty lightweight stamped steel frame.
Universal Crimp Termination System Extron Universal Crimp Tool Four in One Coax BNC Connector Crimp Tool The affordable heavy-duty Universal BNC Crimp Tool was designed by Extron to be the single tool
More informationECOFLEX 10 Characteristics Diameter 10,2 mm. ECOFLEX 15 Characteristics Diameter 14,6 mm. AIRCOM PLUS Characteristics Diameter 10,3 mm
AIRCOM PLUS Characteristics Diameter 10,3 mm Attenuation @ 1 GHz/100m 13,4 db Attenuation @ 1 GHz/100ft 4,08 db 10 GHz ECOFLEX 10 Characteristics Diameter 10,2 mm Attenuation @ 1 GHz/100m 14,2 db Attenuation
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationSMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated RF Connectors Technical Data Sheet PE45145 Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG174, RG316, RG188
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More information7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195
7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195 RF Connectors Technical Data Sheet PE4567 Configuration 7/16 DIN Male Connector
More informationTru products are now under the Tru-Win brand from Winchester Interconnect.
TRU MEIA Series Tru-Win MEIA offers the latest innovation in high power connector design. The MEIA interface provides equivalent kw power handling compared to similar EIA connector line sizes but provides
More information22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
More informationREMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350
REMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350 Productfeatures and advantages Reliable power connection solution for Electric vehicle batteries Battery chargers Forklift trucks Other DC voltage applications
More informationConnector Dimensions. Part Number
CIRCULAR PLASTIC CONNECTORS CONTACT VERSIONS 3, 4, 7, 9, 12 & 25 position models 1 to 8 amps per contact Mixed signal and power or coax available recognized components File No. 102195 Each connector half
More informationHO7RN-F 450/750V BS EN Highly Flexible Rubber Cable
Rubber Insulation and Rubber Sheathed Application Range Heavy duty flexible cables for medium mechanical stress For dry and wet applications Can be used for domestic electric tools According to HD 516
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color All Sizes 9 = UL White (Standard) 8 = UL Black (Special Order)
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9176 series of surface mountable Displacement Connectors (IDC) in 2007.
More informationSTANDARD RTD's INDEX
STANDARD RTD's INDEX PAGE General Information... R2 Temperature/Resistance Table... R6 Part Numbering Examples... R10 High Temperature MgO Elements (RA)... R11 Leadwire Style RTD's (RB)... R12 Leadwire
More informationInterconnect and Termination Devices
Shield Termination SolderSleeve SolderSleeve shield grounding terminators provide an environmentally sealed, insulated & encapsulated solder connection for a variety of applications. Reliable, versatile
More informationSafety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
More information242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
More informationData sheet. W-Series WDU 4 BL
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationPrecision Microwave Coaxial Cable Catalog. belfuse.com/cinch
Precision Microwave Coaxial Cable Catalog belfuse.com/cinch About Semflex For more than 4 years, Semflex has been manufacturing some of the highest quality coaxial cable in the world. Over the years,
More informationData sheet. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationRF CABLE ASSEMBLY, TNC, VERY HIGH POWER, 50 OHMS, SEMI-RIGID AND FLEXIBLE CABLE, DC TO 8GHZ BASED ON TYPE TNC-VHP
Page 1 of 21 RF CABLE ASSEMBLY, TNC, VERY HIGH POWER, 50 OHMS, SEMI-RIGID AND FLEXIBLE CABLE, DC TO 8GHZ BASED ON TYPE TNC-VHP ESCC Detail Specification Issue 1 March 2017 Document Custodian: European
More informationChord Crimson VEE 3. Chord Cobra VEE 3. Chord Chameleon VEE 3. Chord Cadenza Reference. Chord Chorus Reference. Chord Anthem Reference
Product list Chord Crimson VEE 3 Oxygen free copper multi-strand conductors. Polyethylene insulation. Pseudo balanced conductor configuration. Dual layer foil and braid shielding, effective to high frequencies.
More informationEngineered Products and Training Program. Engineered Products. Certified Installer Training Program TIMES MICROWAVE SYSTEMS
Engineered Products FBT Flexible Low Loss High Power Cable: FBT is a flexible low loss indoor/outdoor highly fire retardant cable suitable for use up to 150 C. Intended specifically for runs within and
More informationUHV Double-Ended SMA Feedthrough, , Conflat compatible flange
SMA Interface SMA Interface Grounded and Feedthroughs UHV Double-Ended SMA Feedthrough, 110730, Conflat compatible flange UHV male SMA cable 5 assembly, 110755, Kapton insulated 50-ohm coaxial cable Features
More informationAmphenol. Advantage. R-Line R-146. Rectangular Attached Multi-Pin Industrial Cable Assemblies. Amphenol - Sine Systems
Amphenol Rectangular Attached Multi-Pin Industrial Assemblies Advantage R-146 R-Line Amphenol - Sine Systems Advantage * vs. the R-Line Molded Advantage Series * Patents pending Low Cost UL & CSA Listed
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationData sheet... W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationMedium-base Lampholders
Medium-base Lampholders For HID Lamps Medium-base lampholders Material: porcelain, white Nominal rating: 4A/250V/5kV pulse rated Terminals: bushings with set screws 18 14AWG solid Screw shell insert: zinc-plated
More informationQUADRAX CONNECTOR SERIES
ONNTOR SRIS or Shell Styles MIL-TL-8999/0 & 6 THNIL HRTRISTIS SPIITIONS Temperature Rating: -55 to + 5 orrosion: MIL-ST-0 Method 0, Test ondition Shock: MIL-ST-0 Method, Test ondition Vibration: MIL-ST-0
More informationDatasheet Platinum Resistance Pt100 In-head (Push Button) Temperature Transmitter TX203P mA output, default range supplied C
Datasheet Platinum Resistance Pt100 In-head (Push Button) Temperature Transmitter TX203P - 4-20mA output, default range supplied 0-100 C ENGLISH The TX203P RTD in-head mounted temperature transmitter connects
More informationData sheet. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationData sheet. W-Series WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationAmphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
More information