Interconnect and Termination Devices

System Oper. Used on Part No. Product. Environmental Solder Flux Insulation Temperature Cables Rated. Selection Series

SolderSleeve Shield Terminators Product Facts Transparent insulation sleeve provides encapsulation, inspectability, strain relief, and insulation Prefluxed solder preform provides a controlled soldering

Interconnect and Termination Devices

SolderSleeve SolderSleeve splicing devices which can be used to make sealed or unsealed splices in a single step they solder, insulate, encapsulate and strain relieve a wide range of wire sizes. Features

Interconnect and Termination Devices. A Comprehensive Range of INTERCONNECTION DEVICES

INTRODUCTION A Comprehensive Range of INTERCONNECTION DEVICES For all electronic systems, sealed or unsealed, and high or low temperatures Interconnection and termination devices offer an inexpensive,

Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers

Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Accessories Connectors Backshells Bonding Leads Metal Braids

Wire-to-Wire Splicing

SolderSleeve Wire Splices 8-6 Product Facts Transparent polyvinylidene fluoride or polyolefin sleeve provides encapsulation, inspectability, strain relief, and insulation Prefluxed solder preform provides

SolderSleeve One-Step Wire and Cable Terminators. Selection Guide

R SolderSleeve One-Step Wire and Cable Terminators Selection Guide Splicing wire to wire Terminating wire to component terminal Terminating coaxial cables Terminating ground wire to cable shield Preinstalled

STS Environmentally Sealed Shield Terminators The Mark of Quality for Wire and Cable Terminations

STS Environmentally Sealed Shield Terminators The Mark of Quality for Wire and Cable Terminations Reliability and inspectability are hallmarks of the Sumitube H-M and H-ML series shield terminators. Assembled

SOLDER SLEEVES AIRWORTHINESS BULLETIN. Overview. Repair and Maintenance Techniques for Wiring Systems Date : 29 July 2005.

Attachment 2 SOLDER SLEEVES Overview This topic describes the termination and installation procedures for shielded cable on aircraft. Page 35 of 93 Solder Sleeves Shielded cable, in one form or another,

AEE. Canada. Australia

DMARCA DE CONFORMIDA CORDS & ELECTRICAL UNIVERSAL POWER JUMPER CORD INTERNATIONAL AGENCIES APPROVED 302 POWER JUMPER CORD APPLICATIONS: To Connect Accessories and Peripherals to Computers and Electronic

LGH High Voltage Connectors

Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],

Spec wire. Performance Wire and Cable

Spec 44.55.99wire Performance Wire and Cable 44 Wire Dual Wall 150ºC rated, XL-PVDF SPEC 44 wire has a dual wall construction which combines the outstanding physical and electrical characteristics of radiation

SPEC 55 Wire and Cable High-performance wire and cable insulation system for 65 C to 200 C

SPEC 55 Wire and Cable High-performance wire and cable insulation system for 65 C to 200 C Applications Hookup and signal wire and cable used in aircraft, avionics, military electronics, satellites, helicopters,

Termination of D-621 Triaxial Connectors to Shielded Twisted Pair Cable for MIL-STD-1553B Applications

1 of 18 Termination of D-621 Triaxial Connectors to Shielded Twisted Pair Cable for MIL-STD-1553B Applications This Engineering Standard forms a part of Engineering Standard ES-61162: "D-621 Connectors

ADVANCED GROUP. Pee-Series Series 12 KVDC. Introduction. Introduction

Introduction Introduction Pee-Wee is a series of subminiature, high voltage connectors and cable assemblies for use in high voltage applications where dense electronic packaging is required. Pee-Wee uses

Wire and Cable. 99 Wire Dual Wall 120ºC rated, Modified Polyester Low fire hazard wire and cable. Features & Benefits

Dual Wall 20ºC rated, Modified Polyester 99 wire has a dual wall construction of radiation crosslinked modified polyester. This combines excellent mechanical performance and chemical resistance with a

Wire and Cable. 55 Wire Single or Dual Wall 200ºC rated, XLETFE High performance wire and cable. Features & Benefits

55 wire is insulated with modified radiation crosslinked ETFE polymer and combines the easy handling of a flexible thin wall wire, with excellent scrape abrasion and cut-through characteristics. The single

P3-19 Series Connectors For Entertainment Lighting

Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully

WIRE & CABLE. 55 Wire High performance wire and cable

Applications 55 wire is insulated with modified radiation cross-linked ETFE polymer and combines the easy handling of a flexible wire, with excellent scrape abrasion and cut-through characteristics. The

Heat Shrinkable Tubing SA47, SA47-LA, SA47-HT

Heat Shrinkable Tubing SA47, SA47-LA, SA47-HT Quick and easy protection for cable connections and splices Excellent protection against moisture and corrosion Best solutions for Automotive and Industrial

SPEC 44. Wire and cable

SPEC 44 Wire and cable Applications SPEC 44 wire has a dual wall construction which combines the outstanding physical and electrical characteristics of radiation crosslinked polyalkene with the excellent

WIRE & CABLE. 99 Wire Low fire hazard wire and cable

Applications 99 wire has a dual wall construction of radiation cross-linked modified polyester. This combines excellent mechanical performance and chemical resistance with a range of enhanced fire hazard

General Information and Selection

Different strain gage installation conditions and test specifications often necessitate the use of different types or sizes of leadwires. For accurate, reliable strain measurements, it is important to

Shrink temperature of 120 C. High-impact, abrasion, corrosion and chemical resistance. Rated for 600V, 90 C continuous use

HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements

SINGLE POLE SOCKETS - SOLDER MOUNT

SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin

I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable

PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw

NiAc Terminals and Splices

Perma-Seal NiAc Terminals and Splices 22 8 AWG 22 8 AWG Size SA-22-06 6 SA-22-08 8 SA-22-0 0 SA-222-4 /4 6 4 AWG SB-27-06 6 SB-27-08 8 Size SA-226-8 /8 SA-25-06 6 SA-25-08 8 SA-25-0 0 SB-28-8 /8 SB-227-06

MiniSeal D-436 Series Sealed Crimp Splice Products Installation Guidelines

R MiniSeal D-436 Series Sealed Crimp Splice Products Installation Guidelines Introduction MiniSeal splicing products provide reliable wire splicing in a wide variety of applications. These environment-resistant

Heat-Shrinkable Tubing

HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements

CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES

CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES FOR CABLE CARRIERS EDITION 09-2012 Durable, reliable, cost-effective

sealed mini usb connectors

QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:

Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE

MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact

Series 791 Connectors

Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5

V349 (CLF5043) Halide Free No Clean Core Wire Fine Wire Applications

Pb V349 (CLF5043) Halide Free No Clean Core Wire Fine Wire Applications INTRODUCTION Viromet* 349, with a composition of Sn/Ag/Cu/In + X, is one of the high-performance lead free solder available in the

Resist water & condensation Resist salt & other contaminants Resist wire pull out & current leakage

Heat Seal & Resist water & condensation Resist salt & other contaminants Resist wire pull out & current leakage Who Uses Heat Shrink : Heavy Duty Trucking Marine & RV Plant Maintenance Departments OEM

High Performance Wire and Cable SPEC 55. Product Facts. by hot stamp, ink jet or laser, and can be potted without pre-etching.

SPEC 55 9-10 Product Facts Resistant to electrical arc tracking in wet or dry conditions Single or dual wall constructions Small size, ultra light weight Exceptional chemical resistance -65 C to 200 C

Schluter -DITRA-HEAT Repair procedure for the DHE-HK Heating Cable

Schluter -DITRA-HEAT Repair procedure for the DHE-HK Heating Cable 555758 03/2018 2018 Schluter Systems L.P. DITRA and HEAT E are registered trademarks of Schluter Systems CONTENTS 3 List of tools required

High Performance Wire and Cable

SPEC 55 Product Facts Resistant to electrical arc tracking in wet or dry conditions Single or dual wall constructions Small size, ultra light weight Exceptional chemical resistance -65 C to 200 C [-85

Electrical Characteristics Nominal electrical characteristics are shown in Table 1. Attenuation, Comply with ANSI T1.102; discrete values Table 1a.

734A COAXIAL CABLE Application Intended for interconnection of transmission and switching systems equipment. Features UL listed as NEC Type CMR and CSA certified as Type CMR. NORDX/CDT 734A coaxial was

SEALED CRIMP CONNECTORS SEALED SOLDER CONNECTORS SEALED CRIMP & SOLDER CONNECTORS SEALED MULTIPLE WIRE CONNECTORS SEALED STEP-DOWN BUTT CONNECTORS SEALED HEAT SHRINK TUBING SEALED SOLDER SYSTEM FOR BATTERY

SLEEVING (CONVOLUTED) SLEEVING (SPLIT CONVOLUTED) SLEEVING (PVC) 56 AUTO MARINE PRODUCT CATALOGUE 2018/19 VISIT:

SLEEVING (CONVOLUTED) Halogen-free nylon convoluted sleeving suitable for bundling of wires and protection against abrasion. Continuous operating temperature -40ºC to 5ºC with short excursions up to 150ºC.

Data sheet C6 A RJ45 field plug pro

Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable

SERIES 85 RF, MICROWAVE AND DATALINK CONTACTS

SERIES 5 RF, MICROWAVE AND DATALINK CONTACTS for MIL-DTL-999, Series SuperNine, Series 0 Mighty Mouse, and Series 9 Micro-Crimp connectors APRIL 06 High Speed High Reliability High Availability No more

Microwave Coax. w w w. t e m p f l e x. c o m ( ) M i l f o r d R d. S o u t h G r a f t o n, M A

Microwave Coax w w w. t e m p f l e x. c o m ( 5 0 8 ) 8 3 9-5 9 8 7 2 6 M i l f o r d R d. S o u t h G r a f t o n, M A 0 1 5 6 0 Microwave Coax Product Description Low Loss, Flexible Microwave products

Terminating D /-0289 Subminiature SolderTact Contacts to Twisted-Pair Cable

Print 12-Jun-03 1 of 11 Terminating D-602-0288/-0289 Subminiature SolderTact Contacts to Twisted-Pair Cable 1. Purpose and Scope This engineering standard contains the termination procedures, inspection

Creating. There is one basic question every customer needs to address when creating custom

Wire and cable have a very deep history in industry, and remain indispensable for a wide variety of applications today. In our current digitized and online landscape, getting the best wire and cable is

Shrink temperature of 120 C. Rated for 600V, 90 C continuous use. T&B recommended up to 1kV. HS Series Specifications

HS Series Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements of U.R.D., submersible,

Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers

Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Accessories Connectors Backshells Bonding Leads Metal Braids Relays and

Amphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:

Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol

AMP Precision Pin and Socket Contacts [ ] A ± [6.35] Dia. Ferrule Part No Part No.

Coaxial Contacts Subminiature, Crimp, Snap-In, Size 16 1.010 [25.65] Ref..650 [16.51] Ref. 0.107 +.005.000 [2.718 +.127.000].250 [6.35] A ±.003 ±.076 Material Outer Shell Brass per MIL-C-50 Center Conductor

Sample Specification Electrical Heat Tracing Cables Metric Units

Sample Specification Electrical Heat Tracing Cables Metric Units January 2008 ELECTRIC HEAT TRACING CABLES SPECIFICATION TABLE OF CONTENTS PAGE 1.0 HEATER CABLES... 3 1.1 SELF-REGULATING... 3 1.2 FLEXIBLE

EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE

EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:

QUADSPLITTER AND IN-LINE QUADSPLITTER

QUADSPLITTER AND IN-LINE QUADSPLITTER technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test Condition B shock: MIL-STD-0 Method, Test Condition

1.0 Receiver TAC Contact Insertion/Extraction. 2.0 TAC (Receiver) Module Installation/Removal. 3.0 Wiring Contact Insertion/Extraction

Downloadable Documents (Adobe Acrobat (TM) format) Click on the links below to view or download copies of VPC User Manual in Adobe Acrobat (.PDF) format. Note: If you would like printed copies of any of

QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400

QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating

ÖLFLEX HEAT. Cable Solutions for Extreme Temperature

ÖLFLEX HEAT Cable Solutions for Extreme Temperature ÖLFLEX Reliable performance no matter how extreme the temperature. Choosing the best cable for applications involving extreme temperatures is one of

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order

The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)

Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz

Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5 reliable performance, dependable service Replace traditional RG types for benefit of: lower loss better shielding > - 90dB Drop in replacement

Low Voltage Splices, 1000 V or less

Low Splices, 000 V or less For installations from 20 V to kv, 3M offers several low voltage splice options, including 3M-developed cold shrink technology, heat shrink, resin and tape. 3M Low Splices are

3M IDC Ribbon Cable Socket. Series 891

78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer

High-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type

233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall

Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A

Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC 11801

SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch

SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight

Wiring Repair WIRING REPAIR

20-10-00 Wiring Repair WIRING REPAIR 1. GENERAL This section contains procedures applicable to the fabrication and repair of wire harness assemblies, cables, and wires. All wiring repairs of wire harness

PRODUCT SPECIFICATION

1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION

LTE high-performance coaxial cables (RG replacement)

LTE high-performance coaxial cables (RG replacement) Center Conductor: See table below. Dielectric: LTE (extruded low-density PTFE) or low density / composite. Inner Shield: 875-892: None. 900-142: Flat

Data sheet C6 A RJ45 field plug pro 360

Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable variable

Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique

EXTRUDED, CROSS-LINKED FLUOROPOLYMER INSULATED WIRES AND CABLES ON SILVER-PLATED COPPER CONDUCTOR, LOW FREQUENCY, 600V, -100 TO +200 C

Page 1 of 24 ETRUDED, CROSS-LINKED FLUOROPOLYMER INSULATED WIRES AND CABLES ON SILVER-PLATED COPPER CONDUCTOR, LOW FREQUENCY, 600V, -100 TO +200 C ESCC Detail Specification Issue 4 March 2013 Document

MICROWAVE & RF CABLE Semi-Rigid, hand-formable & flexible microwave cable

MICROWAVE & RF CABLE Semi-Rigid, hand-formable & flexible microwave cable TABLE OF CONTENTS The Story of Micro-Coax...2-3 Microwave Cable Selection Guide...4-5 Semi-Rigid Coaxial Cable...5 UTiFORM Tin-Dipped

EXTRA-PREMIUM GRADE PVC JACKET FOR EXTENDED CABLE LIFE. 24 AWG (0,23mm 2 ), 7/32 (7x0,20mm), Insulation Thickness: 0.010" (0,25mm)

XTRA GUARD 1 MULTICONDUCTOR, SUPRASHIELD EXTRA-PREMIUM GRADE PVC JACKET FOR EXTENDED CABLE LIFE UL TYPE CM, AWM 2464 CSA CMG FT4 300 VOLT 34 CHOOSE XTRA GUARD 1FOR: Unsurpassed Flame and Moisture Resistance

I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX

PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376

EcoCable and EcoFlex Cable. Smaller. Lighter. Tougher. 100% Recyclable.

EcoCable and EcoFlex Cable Smaller. Lighter. Tougher. 100% Recyclable. Total Performance, Completely Recyclable EcoCable and EcoFlex cable are Alpha Wire s newest innovations in control cabling. A true

OPENETICS. P/N E-DAT Industry RJ45 field plug insert Cat.6A. Specialist Manufacturer Voice Data Security.

Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification Cat.6 class E A plug to be assembled in the field and mounted in IP67 plug housings of variants 1, 4,

EcoCable and EcoFlex Cable. Smaller. Lighter. Tougher. 100% Recyclable.

EcoCable and EcoFlex Cable Smaller. Lighter. Tougher. 100% Recyclable. Total Performance, Completely Recyclable EcoCable and EcoFlex cable are Alpha Wire s newest innovations in control cabling. A true

3 Heat Shrinkable Products

3 Heat Shrinkable Products Heat Shrink Tubing Selection Guide 102 Single-Wall Polyolefin Tubing 104 Adhesive-Lined Tubing 114 3M Heat Shrink products provide a uniquely effective means of applying skintight

DETAIL SPECIFICATION SHEET CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: TYPE IV JUMPER CABLE ASSEMBLY, LEAD, ELECTRICAL

INCH-POUN 10 June 2015 SUPRSING MIL-TL-83413/8 w/amendment 1 30 July 2014 TAIL SPCIFICATION SHT CONNCTORS AN ASSMBLIS, LCTRICAL, AIRCRAFT GROUNING: TYP IV JUMPR CABL ASSMBLY, LA, LCTRICAL This specification

C 062 C 105 K 1 R 5 T A Rated Voltage (VDC) 5 = 50 1 = = 200

Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, X7R Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in X7R dielectric feature

Table 1: Pb-free solder alloys of the SnAgCu family

Reflow Soldering 1. Introduction The following application note is intended to describe the best methods for soldering sensors manufactured by Merit Sensor using automated equipment. All profiles should

PRODUCT SPECIFICATION

MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed

Glenair s Series 80 ASAP Cordsets for High-Speed Ethernet, USB and Firewire Applications

General Information Compact Weight-Saving Design with size #23 Contacts SB 2.0, 100BASE-T, 1000BASE-T, IEEE 1394 Environmentally Protected, Robust Construction Aerospace-Grade Cable Meets FAA FAR 25 Flammability

Data sheet C5 RJ45 field plug pro 2P PROFINET

Illustrations Dimensional drawing Page 1/5 See enlarged drawings at the end of document Product specification Cat.5 class D RJ45 plug, 2 pairs, to be assembled in the field fully shielded and multi-port

Pin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.

EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches

EcoCable and EcoFlex Cable. Smaller. Lighter. 100% Recyclable.

EcoCable and EcoFlex Cable Smaller. Lighter. 100% Recyclable. Total Performance, Completely Recyclable EcoCable and EcoFlex cable are Alpha Wire s newest innovations in control cabling. A true engineering

(AH) Power Precision Heat Sinkable Resistors

Version: October 10, 2017 (AH) Power Precision Heat Sinkable Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

(RMG100) TO247 Power Pulse-loading Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web:

Version: January 12, 2017 (RMG100) TO247 Power Pulse-loading Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

Data sheet E-DAT Industry RJ45 field plug insert Cat.6 Class E A

Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 class E A plug to be assembled in the field and mounted in IP67 plug housings of variants

50W TO220 High Power Resistors

50W TO220 High Power Resistors MHP 50 Non-inductive, thin film technology. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 2.3 C/W resistor hot spot to metal

Pin Contacts Military Part Number. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.

EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp Glenair Part Glenair Part 22 22-28 AWG M39029/107-620 850-007-22-620 M39029/106-614 850-006-22-614 20 20-24

ÖLFLEX FORTIS 55 Highly Flexible and Extremely Oil-Resistant Tray Cable; -40 C Flexible/-55 C Stationary

TRAY-RATED CABLE Quick Select Chart 48 TC 600/TC 600 S 50 Flexible Tray Cable with TC-ER for Easier Installations; Unshielded & Shielded TRAY II/TRAY II CY 52 Extremely Oil-Resistant & Flexible Tray Cable

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

78-Way D-type Connector Accessories

-Way D-type onnector Accessories 0-00D y Standard Voltage to V A/0V, A y Mating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed ompatibility The Standard Voltage -Way D-Type

POLYIMIDE INSULATED WIRES AND CABLES, LOW FREQUENCY, 600V, -200 TO +200 C BASED ON TYPE SPL. ESCC Detail Specification No.

Page 1 of 23 POLYIMIDE INSULATED WIRES AND CABLES, LOW FREQUENCY, 600V, -200 TO +200 C BASED ON TYPE SPL ESCC Detail Specification Issue 3 May 2013 Document Custodian: European Space Agency see https://escies.org

FTZ New Products COOL SEAL CLEAR SEAL EXTREME SEAL CORRECT CONNECT MPC CRIMP TOOL SEAMLESS COPPER LUGS. Qua lity Sta tement

FTZ New Products (See page 6) (See page 6) (See page 14) (See page 50) COOL SEAL The patented heat-less, solderless terminal that saves time and money. CLEAR SEAL The latest advancement in heat shrink

HOOK-UP WIRE A STYLE TO SUIT ANY NEED

A STYLE TO SUIT ANY NEED Alpha s commitment to quality and service starts at the beginning... with the manufacturing of single conductor hook-up wire, the most basic wiring component. Used extensively

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

DETAIL SPECIFICATION SHEET CABLES, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 50 OHMS, M17/28-RG058

INCH-POUND MIL-DTL-17/28C 13 April 2010 SUPERSEDING MIL-C-17/28C 18 July 1985 DETAIL SPECIFICATION SHEET CABLES, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 50 OHMS, M17/28-RG058 Inactive for new design after

Precision Thermistor Sensors

Precision Thermistor Sensors For Laboratory Applications ON-400 Series U For Use in Laboratory or Other High-Accuracy Applications U Rugged Construction Can Be Used for Short Term Water and Soil Readings

7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215

7/16 DIN Male Right Angle Connector Clamp/Solder Attachment RF Connectors Technical Data Sheet PE44280 Configuration 7/16 DIN Male Connector MIL-C-39012 50 Ohms Right Angle Body Geometry Features Silver

Suflex Astra 703/105. Features. Product Description. Suggested Applications VW-1 Rated Mechanical Tubing

VW-1 Rated Mechanical Tubing Temp Class: Class A (105 C) Grades Available: C Material: Polyvinylchloride Tubing Sizes Available: AWG #24 through 2-1/2" I.D. Colors Available: Clear, Black Applicable Standards:

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, MODULAR, TYPE IV, CONNECTOR, 200 CONTACT, CENTER

INCH-POUND MIL-DTL-28754/100A 29 December 2015 SUPERSEDING MIL-C-28754/100(SH) 31 October 1989 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, MODULAR, TYPE IV, CONNECTOR, 200 CONTACT, CENTER This specification