Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A

Transcription

1 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC Ed.2.2: , DIN EN : GBit suitable according to IEEE 802.3an suitable for Power over Ethernet (PoE, PoE plus and UPoE) 8-wire RJ45 plug for AWG 22 to be assembled in the field connection of AWG 26/7-22/7; AWG 26/1-22/1 possible solid copper wire diameter from 0.4 to 0.64 mm stranded copper wire diameter from 0.48 to 0.76 mm conductor diameter up to 1.6 mm cable jacket from 5.5 to 8.5 mm consists of only 2 parts easy assembly - connection without special tools during mounting, the cable is mechanically fastened to the stuffer cap easy to actuate strain relief strain relief can be snapped on after assembly as color coding zinc die-cast housing for industrial use protected locking hook can be used as test plug on IP67 protected jacks of variants 1, 4, 5, 6 and 14 variants: T568A, T568B, Industry

2 General Data Fields of application Design Shielding Transmission technology Color Dimensions Dimension (L x W x H) Dimension (L x W x H) Field assembly ability Multi-port capability Marking option Industrial Ethernet, Office Plugs shielded Copper black x x mm 2.02 x 0.51 x 0.58 in. Strain relief Transmission characteristics Category (ISO) 6 Class (ISO/IEC) Category (TIA) 6 PoE PoE plus UPoE Transmission rate up to 10 GBit E A IEEE 802.3af IEEE 802.3at IEEE 802.3an Connections/interfaces Connector technology interface 1 Connector technology interface 2 Number of ports interface 2 1 Number of ports interface 2 equipped 1 Number of positions/contacts interface 1 8 Number of positions/contacts interface 2 IDC-connection RJ45 plug 8P/8C

3 Connections/interfaces Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG Conductor cross section, solid wire Conductor diameter, solid wire (bare copper) Conductor diameter, solid wire (bare copper) mm² mm in. Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG Conductor cross section, stranded wire Conductor diameter, stranded wire (bare copper) Conductor diameter, stranded wire (bare copper) Core diameter (min. - max.) Core diameter (conductor with insulation) Core diameter (conductor with insulation) Cable sheath diameter (min. - max.) Cable sheath diameter Cable sheath diameter mm² mm in mm 0.06 in. Cable access/outlet 180 Reconnectibility Shield connection mm in., if cross section is greater or the same flexible contact spring Electrical characteristics Current carrying capacity Contact resistance Insulation resistance Dielectric strength conductor-conductor (secondary) Dielectric strength conductor-shield max. 1 A max. 20 mohm min. 500 MOhm min V DC min V DC Mechanical characteristics Mounting method Insertion and withdrawal force Life - Number of mating cycles 750 Position/mounting of latch - standard installation top position Strain relief snap-in function max. 30 N

4 Materials and material properties Material - Housing Material - Insulation displacement contacts Material - Finish of insulation displacement contacts Material - Contact Material - Contact finish Material - Shield Material - Shield finish Material - Stuffer cap Material - Strain relief Material - Latch GD-Zn (zinc die-cast) PhBr (phosphor bronze) Ni + Au (nickel-gold) CuSn (tin bronze) Ni + Au (nickel-gold) Cu-Ni-Zn (nickel silver) Ni (nickel) PA UL94-V0 PA UL94-V0 Plastics Environmental conditions Temperature (min. - max.) Temperature - Storage C 90 C Temperature - Storage F 194 F Particulate ingress Liquid ingress/immersion Rapid change of temperature IP2X IPX0-40 C bis +70 C / 25cycles t = 30 min. Damp heat +25 C / +77 F +65 C / +149 F / 93% RH // -10 C / -14 F / 21 cycles Flowing mixed gas +25 C / +77 F / 73% RH / 4 days, H2S / SO2 Electromagnetic measurement E 2 Vibration 50 m/s² Shock 250 m/s² Certifications Gost Certification Approvals RoHS UL listed (file no.) compliant DUXR.E178484

5 The product meets the following standards Generic cabling systems General requirements ISO/IEC Ed.2.2: DIN EN : TIA/EIA 568-B.2-10 Office buildings ISO/IEC Ed.2.2: DIN EN : TIA/EIA 568-C Industrial area ISO/IEC DIN EN : TIA/EIA 1005 Living units ISO/IEC DIN EN : TIA/EIA 570-B Expansion of Communication Circuit Accessories UL 1863 (DUXR) Category Connectors for electronic equipment Free and fixed connectors DIN EN : Interference proof Immunity for industrial environments DIN EN : Emission proof Electromagnetic emission for residential, DIN EN : commercial and light-industrial environments Climate tests IEC Classifications ETIM 5.0 EC Packing details Type of packaging Packaging unit - Weight (gram) Packaging unit - Weight (pound) Packaging dimension (W x H x D) Packaging dimension (W x H x D) 10 pc(s) / box g 0.55 lb x x mm 9.72 x 6.34 x 2.28 in.

6 Illustrations Dimensional drawing