Heat-Shrinkable Tubing
|
|
- Aldous Lloyd
- 5 years ago
- Views:
Transcription
1 HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements of U.R.D., submersible, and direct burial installations Tubing, featuring an internally applied sealant, offers protection against moisture, and may be used over lead, steel, aluminum, copper, standard plastic and elasmeric insulating materials Shrink temperature of 120 C High-impact, abrasion, corrosion and chemical resistance Rated for 600 V, 90 C continuous use Thermoplastic adhesive liner provides complete environmental protection and insulation Meets: UL and CSA standards, ANSI C119.1, Western Underground Guide Numbers 2.4, 2., ICEA and NEMA insulation thickness requirements Continuous operating temperature: - C 110 C T&B recommended up 1 kv HS Series Specifications ASTM D412, ISO 37 Elongation 600% Elongation after Heat Aging (168 hrs. at 10 C) 00% Heat Shock (4 hrs. at 2 C) or flowing ASTM D2671 Longitudinal Change +1%, -10% Specific Gravity ASTM D DIelectric Strength ASTM D V/Mil (20kV/mm) Dielectric Voltage Withstand (00 V, 600Hz, 1 Min.) UL 486D No Breakdown, 24kV 1 min., 1kV 4 hrs. Volume Resistivity ASTM D ohm-cm Fluid Resistance MIL-DTL-2303 Good Excellent Water Absorption ASTM D70 0.1% Lap Sheer (1 in./min. at 23 C) ASTM D psi (0.87 MPa) Softening Point ASTM E28 90 C± C Peel Strength (300mm/min. at 23 C) ASTM D 1000 steel, aluminum, P.E. Water Penetration STM 706 No penetration after 236 hrs. of continuous immersion C4
2 HS Series Black Min. Expanded I.D. Max. I.D. Nom. Wall Fits any listed or certified AL or CU splice with dia. no larger than O.D. Cable Range HS #14 AWG HS16-12L HS #10 AWG HS #8 AWG HS12-6L HS #6 AWG HS6-1 4 #6 AWG HS6-1L HS #2 AWG HS4-30 #1 AWG 20 HS4-30L HS /0 AWG HS HS40-400L /0 kcmil HS kcmil HS kcmil HS L HS kcmil HS12-30** kcmil 2 HS30-30** HS30-4** kcmil HS12-40** kcmil HS30-40** HS40-4-TB kcmil Order multiple is std. pkg. All lengths have facry-applied sealant **UL not applicable Pkg. Qty. Red I.D. I.D. For 2-Way Connecr Cable Sizes HS12-6LR #8 6 AWG HS6-1LR #6 2 AWG HS4-30LR #1 3/0 AWG 10 Order multiple is std. pkg. All lengths have facry-applied sealant Heavy-Wall Tubing ( ft. rolls) Black I.D. I.D. For 2-Way Connecr Cable Sizes HS #14 10 AWG HS #8 6 AWG 0.09 HS #6 #2 AWG HS #1 3/0 AWG HS /0 30 kcmil 0.16 HS kcmil Order by reel, not by feet. ft. reels not supplied with facry applied sealant 1 C
3 HSHR Series 6:1 Shrink Ratio High Shrink Ratio Accommodates a wide variety of connecr shapes and configurations Thermoplastic adhesive liner for complete environmental protection and insulation Continuous operating temperature: - C 110 C Shrink temperature: 120 C Flame-retardant HSHR Series Specifications I.D. I.D. Nominal Wall Code Cable Size Standard HSHR #22 #46 AWG HSHR #8 700 AWG HSHR # AWG 0.13 HSHR #2 10 AWG 48 HSHR /0 100 kcmil 1 HSHR /0 170 kcmil HSHR kcmil ASTM D412, ISO 37 Elongation 600% Elongation after Heat Aging (168 hrs. at 10 C) 00% Heat Shock (4 hrs. at 2 C) or flowing ASTM D2671 Longitudinal Change +1%, -10% Specific Gravity ASTM D DIelectric Strength ASTM D149, IEC V/Mil (20kV/mm) Dielectric Voltage Withstand (00 V, 60Hz, 1 Min.) UL 486D No Breakdown, 1kV 4 hrs. Volume Resistivity ASTM D ohm-cm Fluid Resistance MIL-DTL-2303/1 Good Excellent Water Absorption ASTM D70 0.1% Lap Sheer (1 in./min. at 23 C) ASTM D psi (0.87 MPa) Softening Point ASTM E28 90 C± C Peel Strength (300mm/min. at 23 C) steel, aluminum, P.E. ASTM D 1000 Blocking (30 C) ASTM D1146 No blocking Water Penetration STM 706 No penetration after 236 hrs. of continuous immersion C6
4 HSHR Series 3:1 Shrink Ratio Flame-Retardant Heavy-Wall Insulates and protects electrical splices and terminations High-impact and abrasion resistance Thermoplastic adhesive liner Rated for 600 V, 90 C continuous use. Continuous operating temperature: - C 110 C Shrink temperature of 120 C Meets: UL and CSA standards, ANSI C119.1, Western Underground Guide Nos. 2.4, 2., MIL-DTL-2303/1, IEEE 383 Vertical Flame Test, ANSI C , ICEA S-19-8 and NEMA insulation thickness requirements HSFR Series Specifications I.D. I.D. Nominal Wall Code Cable Size HSFR #14 #10 AWG HSFR #8 #6 AWG 0.09 HSFR #6 #2 AWG HSFR #1 3/0 AWG HSFR /0 30 kcmil 0.16 HSFR kcmil Order multiple is std. pkg. Standard colour: black Standard 48 ASTM D412, ISO 37 Elongation 600% Longitudinal Change ASTM D %, -10% Specific Gravity ASTM D Elongation after Heat Aging (168 hrs. at 17 C) ASTM D2671, ISO 37 00% Heat Shock (4 hrs. at 2 C) or flowing ASTM D2671 or splitting Oxygen Index ASTM D Flammability ASTM D2671 Flame-Retardant DIelectric Strength ASTM D V/Mil (20kV/mm) Dielectric Voltage Withstand (00 V, 60Hz, 1 Min.) UL 486D No Breakdown, 24kV 4hrs, 1kV 4 hrs. Volume Resistivity ASTM D ohm-cm Fluid Resistance MIL-DTL-2303/ Good Excellent Water Absorption ASTM D70 0.2% Lap Sheer (1 in./min. at 23 C) ASTM D psi (0.87 MPa) Softening Point ASTM E28 90oC± C Peel Strength (300mm/min. at 23 C) ASTM D 1000 steel, aluminum, P.E. Blocking (30 C) ASTM D1146 No blocking Water Absorption ASTM D70 Less than 0.3% Water Penetration STM 706 No penetration after 286 hrs. of continuous immersion C7
5 HSC Series Provides effective method for sealing cable ends, pipe conduit, etc. Extra thickness at the tip of the end cap prevents sharp ends of the cable from puncturing the seal Flame-retardant Rated from 600/1000 V, 90 degrees continuous use Shrink temperature of 120 C Resistant common fluids and solvents liner provides complete environmental protection and insulation Heat indicating lines. Continuous operating temperature: - C 110 C Heat-Shrinkable End Caps 3:1 Shrink Ratio HSC Series Specifications I.D. I.D. Wall Code Cable Size Nom. HSC #8 #6 AWG HSC #6 #2 AWG HSC #1 3/0 AWG 3.00 HSC /0 30 kcmil 3. 0 HSC kcmil HSC kcmil HSC kcmil 4.0 HSC kcmil.0 Order multiple is std. pkg. Elongation ASTM D412, ISO 37 0% Elongation after Heat Aging (168 hrs. at 10 C) 00% Heat Shock (4 hrs. at 2 C) or flowing Longitudinal Change on Recovery ASTM D %, -10% Specific Gravity ASTM D DIelectric Strength ASTM D149, IEC V/Mil (20kV/mm) Dielectric Voltage Withstand (00 V, 60Hz, 1 Min.) UL 486D No Breakdown, 1kV 4 hrs. Volume Resistivity ASTM D ohm-cm Fluid Resistance MIL-DTL-2303 Good Excellent Water Absorption ASTM D70 0.1% Lap Sheer (1 in./min. at 23 C) ASTM D psi (0.87 MPa) Softening Point ASTM E28 90 C± C Peel Strength (300 mm/min. at 23 C) ASTM D 1000 (mod.) steel, aluminum, P.E. Blocking (30 C) ASTM D1146 No blocking Water Penetration STM 706 No penetration after 236 hrs. of continuous immersion Room Temperature 168 hrs./40 psi Temp. Cycling (-40 C 60 C) 0 cycles/1 psi No leaks Burst Pressure 100 psi (0.70 MPa) C8
6 HSB Series Heat-Shrinkable Breakout Boots Boots for 2-, 3- and 4-way cable breakouts Thermoplastic adhesive liner provides complete environmental protection and insulation Meets ESI Strain relief and mechanical protection Continuous operating temperature: - C 100 C Shrink temperature of 13 C TB Wall Thickness of Body TL Wall Thickness of Leg D d Heat-Shrinkable Breakout Boots L D d L TB TL Application No. Legs Expanded Expanded Wall Thickness Wall Tickness Legs 600V Dia. (min.) Dia. (max.) Dia. (min.) Dia. (max.) (nom.) of body (nom.) of legs (nom.) Conducr AWG/kcmil HSB #3 300 HSB #8 3/0 HSB #1 600 HSB HSB #12 2/0 HSB # HSB / HSB / HSB HSB HSB / HSB Series Specifications Ultimate Elongation ASTM D412, ISO % Elongation after Heat Aging (168 hrs. at 17 C) 20% Heat Shock (4 hrs. at 2 C) No dripping, cracking, flowing ASTM2671 Low Temperature Flexibility (- C) Flammability ASTM D630 Self ext. within 1.97 sec. DIelectric Strength ASTM D V/Mil (11kV/mm) Water Absorption ASTM D % C9
Shrink temperature of 120 C. High-impact, abrasion, corrosion and chemical resistance. Rated for 600V, 90 C continuous use
HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements
More informationShrink temperature of 120 C. Rated for 600V, 90 C continuous use. T&B recommended up to 1kV. HS Series Specifications
HS Series Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements of U.R.D., submersible,
More informationHeatex Identification System. The Heatex Product Programme Offers:
2 Heatex Identification System Heatex is a computerized system for the identification of wires, cables, tubes and equipment that offers a superb combination of clarity and durability. The markers are nicely
More informationDETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, DUAL-WALL, OUTER WALL CROSSLINKED
INCH-POUND 17 June 1996 SUPERSEDING MIL-I-23053/4C 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, DUAL-WALL, OUTER WALL CROSSLINKED This specification
More information3 Heat Shrinkable Products
3 Heat Shrinkable Products Heat Shrink Tubing Selection Guide 102 Single-Wall Polyolefin Tubing 104 Adhesive-Lined Tubing 114 3M Heat Shrink products provide a uniquely effective means of applying skintight
More informationHeat Shrinkable Tubing SA47, SA47-LA, SA47-HT
Heat Shrinkable Tubing SA47, SA47-LA, SA47-HT Quick and easy protection for cable connections and splices Excellent protection against moisture and corrosion Best solutions for Automotive and Industrial
More informationFTZ New Products COOL SEAL CLEAR SEAL EXTREME SEAL CORRECT CONNECT MPC CRIMP TOOL SEAMLESS COPPER LUGS. Qua lity Sta tement
FTZ New Products (See page 6) (See page 6) (See page 14) (See page 50) COOL SEAL The patented heat-less, solderless terminal that saves time and money. CLEAR SEAL The latest advancement in heat shrink
More informationSuflex Astra 703/105. Features. Product Description. Suggested Applications VW-1 Rated Mechanical Tubing
VW-1 Rated Mechanical Tubing Temp Class: Class A (105 C) Grades Available: C Material: Polyvinylchloride Tubing Sizes Available: AWG #24 through 2-1/2" I.D. Colors Available: Clear, Black Applicable Standards:
More informationCABLE JOINTING KITS &
CABLE JOINTING KITS & POWER CABLE ACCESSORIES UPTO 36 KV CORE HEATSHRINK PRODUCTS COMPANY National Highway 73, 48, Tyagi Garden, Yamunanagar-135001, Haryana (India) +91-989-6001-519 +91-805-9001-519 +91-1732-260164
More informationCIR (Crush & Impact Resistant) VFD Power Cable
37-2 CIRVFD CIR (Crush & Impact Resistant) VFD Power Cable Gexol Insulated Three Conductor 2kV Rated 90 C UL Listed as Type TC-ER Power Conductors (x3) Soft annealed flexible stranded tinned copper per
More informationDOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES
DOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES DOWNSTREAM FACILITY CABLES El Dorado, Arkansas Made in America CIR (Crush & Impact Resistant) CIR is a next-generation cable designed to replace older-technology
More informationWIRE & CABLE. 99 Wire Low fire hazard wire and cable
Applications 99 wire has a dual wall construction of radiation cross-linked modified polyester. This combines excellent mechanical performance and chemical resistance with a range of enhanced fire hazard
More informationSPEC 55 Wire and Cable High-performance wire and cable insulation system for 65 C to 200 C
SPEC 55 Wire and Cable High-performance wire and cable insulation system for 65 C to 200 C Applications Hookup and signal wire and cable used in aircraft, avionics, military electronics, satellites, helicopters,
More informationLow Voltage Splices, 1000 V or less
Low Splices, 000 V or less For installations from 20 V to kv, 3M offers several low voltage splice options, including 3M-developed cold shrink technology, heat shrink, resin and tape. 3M Low Splices are
More informationVFD CABLES 100% EMI CONTAINMENT FOR INDUSTRIAL APPLICATIONS
VFD CABLES 100% EMI CONTAINMENT FOR INDUSTRIAL APPLICATIONS INDUSTRIAL VFD CABLES Index n Variable Frequency Drive (VFD) Power Cables Extra Flexible VFD Power Cable............... 2-3 Crush & Impact Resistant
More informationResist water & condensation Resist salt & other contaminants Resist wire pull out & current leakage
Heat Seal & Resist water & condensation Resist salt & other contaminants Resist wire pull out & current leakage Who Uses Heat Shrink : Heavy Duty Trucking Marine & RV Plant Maintenance Departments OEM
More informationJCN cables. The. splice is an
Molded Rubber Splices 15kV 3M molded rubber QS and QS-II kits are inline splices made from specially formulated, peroxide-cured, EPDM rubbers to ensure a stable seal and a splice that will last the life
More informationDrexan Energy Systems Inc.
Drexan Energy Systems Inc. SPECIFICATION Self-Regulating Heating Cable MultiTrace Page 1 of 7 CONTENTS 1. SCOPE 2. PRODUCTS 3. TESTING 4. MARKINGS 5. PACKING 6. GENERAL 7. INSTALLATION AND COMMISSIONING
More informationEND CAP & HEAT SHRINK SLEEVE
END CAP & HEAT SHRINK SLEEVE Tab 5 TUBE END CAP Available in 6 different colours:- RED GREEN YELLOW WHITE BLUE BLACK Internal Length Dia. "A" Dia. "B" mm mm DSSB-EC-TEC 1 3.00 8.80 DSSB-EC-TEC 2 3.00 8.00
More informationÖLFLEX HEAT. Cable Solutions for Extreme Temperature
ÖLFLEX HEAT Cable Solutions for Extreme Temperature ÖLFLEX Reliable performance no matter how extreme the temperature. Choosing the best cable for applications involving extreme temperatures is one of
More informationDUPONT KAPTON POLYIMIDE FILM
GENERAL SPECIFICATIONS DUPONT KAPTON POLYIMIDE FILM INTRODUCTION DuPont manufactures and sells a variety of high-quality polyimide film products in conformance with ISO 9002 certification. These specifications
More informationBURNDY EC&M TYPE YGA HYLUG Terminals. TYPE YGHA HYLUG Terminals. TYPE YGIB GROUNDLINK Connector. TYPE YGHS HYLINK Ground Splice
Grounding TYPE YGHA HYLUG Terminals TYPE YGA HYLUG Terminals Grounding Heavy duty HYLUG irreversible compression terminals designed not only to carry short circuit load but to also withstand high mechanical
More informationLGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
More informationLow Voltage Splices 0-600V (1000V rated) Cold Shrink Splices (0-1000V)
250 Low Voltage Splices 0-600V (1000V rated) Cold Shrink Splices (0-1000V) 3M Series Splice Kits 8420 and 8430 Cold shrink splicing products are designed using 3M s unique cold shrink delivery system.
More informationCOMMON WORK RESULTS FOR INTEGRATED AUTOMATION DESIGN AND CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More information8 to 32 AWG Solid Round Copper ranges from to ranges from to C. Polyester/Polyamideimide
Gauge: Conductor: Pounds per 1000 feet: Feet per pound: Insulation Temp. Rating: Enamel Type: Enamel Build: Average Wire Diameter: Manufacturer: Product Line: Color: Solder Process: Approvals: Applications:
More informationNiAc Terminals and Splices
Perma-Seal NiAc Terminals and Splices 22 8 AWG 22 8 AWG Size SA-22-06 6 SA-22-08 8 SA-22-0 0 SA-222-4 /4 6 4 AWG SB-27-06 6 SB-27-08 8 Size SA-226-8 /8 SA-25-06 6 SA-25-08 8 SA-25-0 0 SB-28-8 /8 SB-227-06
More informationAEE. Canada. Australia
DMARCA DE CONFORMIDA CORDS & ELECTRICAL UNIVERSAL POWER JUMPER CORD INTERNATIONAL AGENCIES APPROVED 302 POWER JUMPER CORD APPLICATIONS: To Connect Accessories and Peripherals to Computers and Electronic
More informationCOPPER MAGNET WIRE GP/MR C
COPPER MAGNET WIRE SPECIFICATIONS Gauge: 8 to 32 AWG Conductor: Solid Round Copper Pounds per 1000 feet: ranges from 20.02 to 0.3192 Feet per pound: ranges from 49.95 to 3132 Insulation Temp. Rating: 200
More informationSECTION ELECTRICAL IDENTIFICATION
SECTION 16075 ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationMedium Voltage Power Cables
N2XSY 6/0, /20, /30 NA2XSY 6/0, /20, /30 N2XS2Y 6/0, /20, /30 NA2XS2Y 6/0, /20, /30 N2XS(F)2Y 6/0, /20, /30 NA2XS(F)2Y 6/0, /20, /30 N2XSEY 3 x 6/0 Medium Voltage Power Cables Photo: HELUKABEL Q 47 Medium
More informationInterconnect and Termination Devices
SolderSleeve SolderSleeve splicing devices which can be used to make sealed or unsealed splices in a single step they solder, insulate, encapsulate and strain relieve a wide range of wire sizes. Features
More informationSEALED CRIMP CONNECTORS SEALED SOLDER CONNECTORS SEALED CRIMP & SOLDER CONNECTORS SEALED MULTIPLE WIRE CONNECTORS SEALED STEP-DOWN BUTT CONNECTORS SEALED HEAT SHRINK TUBING SEALED SOLDER SYSTEM FOR BATTERY
More informationConnecting Systems for Cable Repair (Cable Splices)
p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E015 Connecting
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) 1435 Allec Street Anaheim, CA 92805 Janice Saari Phone: 661-810-0997 JaniceSaari@nts.com MECHANICAL Valid To: September 30,
More informationÖLFLEX HEAT. Cable Solutions for Extreme Temperature
ÖLFLEX HEAT Cable Solutions for Extreme Temperature LAPP products are available from MARYLAND METRICS P.O. Box 61 Owings Mills, MD 1117 USA ph:(10)8-10 (800)68-180 fx:(10)8-1 (800)87-99 web: http://mdmetric.com
More informationGlenair s Series 80 ASAP Cordsets for High-Speed Ethernet, USB and Firewire Applications
General Information Compact Weight-Saving Design with size #23 Contacts SB 2.0, 100BASE-T, 1000BASE-T, IEEE 1394 Environmentally Protected, Robust Construction Aerospace-Grade Cable Meets FAA FAR 25 Flammability
More informationSPECIFICATION SS-140/9. 0.6/1 (1.2) kv CONTROL AND POWER UNDERGROUND CABLES WITH PVC OR XLPE INSULATION AND PVC JACKET
INDEPENDENT POWER TRANSMISSION OPERATOR S.A. TNPRD/ SUBSTATION SPECIFICATION & EQUIPMENT SECTION December 2016 SPECIFICATION 0.6/1 (1.2) kv CONTROL AND POWER UNDERGROUND CABLES WITH PVC OR XLPE INSULATION
More information14 AWG 2 AWG: 600 Volt
INDUSTRIAL AUTOMATION & PROCESS CONTROL CABLES 18.70 600V Type MC Metal Clad and Teck-Style Cables Overview Metal Clad Interlocked PVC Outer Jacket Teck-Style PVC Outer Jacket Introduction Polyester Wrap
More informationInstrumentation Cables
around a world of cables UL INSTRUMENTATION CABLES UL THHN CABLES UL THWN CABLES Instrumentation Cables INDEX Introduction Specialty Cables 300V & 00V Instrumentation Cable Types Certificates and Standards
More informationModel Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No. Box of V. Carton of 1, Gray.
Wire-Nut Wire Connectors Yellow and red Wire-Nut Wire Connectors can easily be applied using the Twist-a-Nut Screwdriver. Five color-coded models cover wire sizes from 22 to 6 AWG Fixed, square-wire spring
More informationWire and Cable. 99 Wire Dual Wall 120ºC rated, Modified Polyester Low fire hazard wire and cable. Features & Benefits
Dual Wall 20ºC rated, Modified Polyester 99 wire has a dual wall construction of radiation crosslinked modified polyester. This combines excellent mechanical performance and chemical resistance with a
More informationVFD CABLES 100% EMI CONTAINMENT HIGHLY FLEXIBLE & DURABLE
VFD CABLES 0% EMI CONTAINMENT HIGHLY FLEXIBLE & DURABLE Nexans AmerCable VFD CABLES Index Standard VFD Power Cable... 2-3 Low Smoke Halogen-Free VFD Power Cable.... - 5 CIR VFD Power Cable... - 7 CIR Arctic
More informationLV AIRGUARD. P r o ble m. ife? No S. a proven, rugged product for harsh environments
ife? No S n K P r o ble m! No? aw a proven, rugged product for harsh environments No LV AIRGUARD LV AIRGUARD Low Voltage Cables for Harsh Environments FEATURES - No Knife? No Saw? No Problem! installation
More informationCarton of 1, B. Min. 2-,34mm 2 Max. 3-1,5mm V 22 to 14 AWG Min. 2 #22 Max. 3 #16. ,34mm 2 to 2,5mm 2. Min.
Wire-Nut Five color-coded models cover wire sizes from 22 to 6 AWG Fixed, square-wire spring creates its own threads maintains a secure positive grip that will not relax over time No pre-twisting required
More informationH e a t s h r i n k N o r t h A m e r i c a n
H e a t s h r i n k N o r t h A m e r i c a n P r o d u c t G u i d e M o u l d e d S h a p e s INDEX Products Styles Determine which shapes suit Pages 2-3 your application and then refer to individual
More information2. CONDUCTORS. 2.1 Strand Types. 2.2 Coatings Tensile Strength of Copper Wire Copper Strand Properties. 2.5 Aluminum Strand Properties
2. CONDUCTORS 2.1 Strand Types 2.1.1 Concentric Strand 7 2.1.2 Bunch Strand 7 2.1.3 Rope Strand 8 2.1.4 Sector Conductor 8 2.1.5 Segmental Conductor 8 2.1.6 Annular Conductor 8 2.1.7 Compact Strand 8 2.1.8
More informationWire Gauge Chart. Cigar Lighter 10 to 12. Dome Light 1. Radio 2 to 4. Gauges 0.7 to 1. Instrument Lights 1.5 to 3
Wire Gauge Chart Amp Capacity Total Length of Wire in Circuit from Power Supply to Accessory 12 Volt 6 Volt 10-ft 20-ft 30-ft 40-ft 50-ft 60-ft 70-ft 80-ft 90-ft 100-ft 1.0 0.5 18 ga 18 ga 18 ga 18 ga
More informationHeatshrink. Moulded Shapes. HellermannTyton. North American Product Guide
Heatshrink North American Product Guide Moulded Shapes HellermannTyton INTODUCTION HellermannTyton heatshrink moulded shapes combine the advantages of quick, easy installation with high electric strength,
More informationn 100% EMI Emission Containment n Designed for Longer Service Life n Highly Flexible
n 0% EMI Emission Containment n Designed for Longer Service Life n Highly Flexible Nexans AmerCable VFD CABLES CABLES Index VFD Cables Standard VFD Power Cable... 2-3 Low Smoke Halogen-Free VFD Power Cable...
More informationWire-to-Wire Splicing
SolderSleeve Wire Splices 8-6 Product Facts Transparent polyvinylidene fluoride or polyolefin sleeve provides encapsulation, inspectability, strain relief, and insulation Prefluxed solder preform provides
More informationINDUSTRIAL CABLES DESIGNED FOR LONGER SERVICE LIFE IN HARSH ENVIRONMENTS
INDUSTRIAL CABLES DESIGNED FOR LONGER SERVICE LIFE IN HARSH ENVIRONMENTS Industrial Cable Index n DLO Power Cables DLO Flexible Power Cable................................ 2-3 n Type W Cables Type W 1/C
More informationLow Voltage AIRGUARD. A proven, rugged product for harsh environments
Low Voltage AIRGUARD A proven, rugged product for harsh environments Linking the future As the worldwide leader in the cable industry, Prysmian Group believes in the effective, efficient and sustainable
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 177 2012 Specification for Braided 75 Ω, Mini-Series Quad Shield Coaxial Cable for CMTS and SDI cables NOTICE
More informationPolyolefin, cross-linked (POX) Shrink Ratio 3:1 Longitudinal change +5%/-10% max. Minimum Shrink Temperature Operating Temperature +90 C
3:1 ShrinKit 321 Universal ShrinKit 321 is a family of five heat shrink tubing assortments in attractive and handy assembly kits. The range consists of ShrinKit 321 Universal, ShrinKit 321 Universal Basic,
More information3 Splices. Splices. 5700A-MT Trifurcating Accessory Kit pg. 302 MT-C pg. 302 MT-E pg. 302
3 Splices Glossary of Splicing Terms pg. 267 Cable Types for Splicing pg. 268 Low Voltage Splicing 0-600V pg. 271 DBR/DBY and 3570-G Direct Bury pg. 271 Cold Shrink 8420 Series pg. 272 8430 Series pg.
More informationElectroSeal Conductive Elastomer Material
ElectroSeal Conductive Elastomer Material How to Specify EcE Decide on molded sheet stock or extruded shapes. Select the desired configuration and dimensions from Table 1 (for sheet stock) or Figures 1
More informationInterconnect and Termination Devices
Shield Termination SolderSleeve SolderSleeve shield grounding terminators provide an environmentally sealed, insulated & encapsulated solder connection for a variety of applications. Reliable, versatile
More informationElectrical Characteristics Nominal electrical characteristics are shown in Table 1. Attenuation, Comply with ANSI T1.102; discrete values Table 1a.
734A COAXIAL CABLE Application Intended for interconnection of transmission and switching systems equipment. Features UL listed as NEC Type CMR and CSA certified as Type CMR. NORDX/CDT 734A coaxial was
More informationDLO Flexible Power Cable
Industrial Cable Index n DLO Power Cables DLO Flexible Power Cable...................................... 2-3 n Type W Cables Type W 1/C Motor Lead Cable.................................... 4-5 Type W 2/C
More informationCORFLEX VFD CORFLEX VFD Part Number: Drive Cable
Part Number: Drive Cable Armored Variable Frequency Drive Cable UL Type MC HL, 600V, 90 C rated - LEAD FREE Description 3 conductor with 3 ground wires, continuous corrugated and welded, impervious aluminum
More informationGEXOL WORLD CLASS OIL & GAS CABLES
GEXOL WORLD CLASS OIL & GAS CABLES Severe Cold Durability Exceeds CSA Cold Bend / Cold Impact (-0 C/-35 C) Drilling Mud Resistant Flame Retardant Certified to IEC 9-3 (33-3A) and IEEE 580 Oil Resistant
More informationinsulate seal protect EquipmEnt insulation and ConnECtion products
In s u l at e Se a l Pr o t e c t Equipment Insulation and Connection Products Table of Contents Equipment Insulation and Connection Products CESK Series...3 Elbow Grounding/Sealing Kit CBTM/CBTH...5 Medium
More informationtion sula usb Low Voltage Switchboard Equipment
Busbar Insulation Low Voltage Switchboard Equipment Publication BI 2010 Contents Descriptive 1 Use Description Method of Supply Technical 2 Compliance to Standards Insulation Flammability/Fire Hazard Effect
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationSLEEVING (CONVOLUTED) SLEEVING (SPLIT CONVOLUTED) SLEEVING (PVC) 56 AUTO MARINE PRODUCT CATALOGUE 2018/19 VISIT:
SLEEVING (CONVOLUTED) Halogen-free nylon convoluted sleeving suitable for bundling of wires and protection against abrasion. Continuous operating temperature -40ºC to 5ºC with short excursions up to 150ºC.
More informationDOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES
DOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES DOWNSTREAM FACILITY CABLES Made in America CIR (Crush & Impact Resistant) CIR is a next-generation cable designed to replace older-technology cables like
More informationHeavy Duty Pressure Transducers. PX2 Series 1 bar to 46 bar 100 kpa to 4.6 MPa 15 psi to 667 psi. Datasheet
PX2 Series bar to 46 bar 00 kpa to 4.6 MPa 5 psi to 667 psi Datasheet Table. Electrical Specifications Characteristic Ratiometric Regulated Transfer Function Order Code (See Figure 5.) AA AB AC AD CH BC
More informationPrecision Thermistor Sensors
Precision Thermistor Sensors For Laboratory Applications ON-400 Series U For Use in Laboratory or Other High-Accuracy Applications U Rugged Construction Can Be Used for Short Term Water and Soil Readings
More informationSpec wire. Performance Wire and Cable
Spec 44.55.99wire Performance Wire and Cable 44 Wire Dual Wall 150ºC rated, XL-PVDF SPEC 44 wire has a dual wall construction which combines the outstanding physical and electrical characteristics of radiation
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationJUN FEATURE 2014 PRODUCT OF THE
JUN 2014 FEATURE PRODUCT OF THE MONTHPage 1 Tools Self-Igniting Butane Torches Torches / Crimpers / Stripper / Heat Gun Up to 2500 flame temperature Safety lock and continuous burning lock With Piezo ignition,
More informationQSLVM2500 QSLV-M Cold Shrink Insulator
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 QSLVM2500 QSLV-M 2-500 Cold Shrink Insulator Minnesota Mining (3M) Catalog Number Manufacturer Description Weight per
More informationDETAIL SPECIFICATION INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
INCH-POUND 17 June 1996 SUPERSEDING MIL-I-23053D 01 May 1986 DETAIL SPECIFICATION INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR This specification is approved for use by all
More informationCreating. There is one basic question every customer needs to address when creating custom
Wire and cable have a very deep history in industry, and remain indispensable for a wide variety of applications today. In our current digitized and online landscape, getting the best wire and cable is
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GRAY S ENGINEERING AND CONSULTING, INC. 6014 S. Ash Avenue Tempe, AZ 85283 Kyle Washatka 480 705 4493 kyle@graysengineeing.com MECHANICAL Valid To: January
More informationInterconnect and Termination Devices. A Comprehensive Range of INTERCONNECTION DEVICES
INTRODUCTION A Comprehensive Range of INTERCONNECTION DEVICES For all electronic systems, sealed or unsealed, and high or low temperatures Interconnection and termination devices offer an inexpensive,
More informationScotchlok UR2 Connector
Scotchlok UR2 Connector Technical Report July 2001 80-6104-1674-7-B Contents: 1.0 Background...1 2.0 Description...1 3.0 Test Program Overview...2 4.0 Connection Stability...2 4.01 Stress Relaxation...3
More informationPsi casing ENd seals type Kt type du type KG/Ko type HA type stm
PSI Casing end seals type kt type du type kg/ko type ha type stm www.psi-products.com 101 PSI Casing End Seals Pipes carrying media (e.g. gas pipes, water pipes, sewage pipes, etc.) below motorways, main
More informationNORMATIVE REFERENCES
American National Standards Institute NORMATIVE REFERENCES ANSI C135.30 1988 (expired 1993) Zinc-Coated Ferrous Ground Rod Electrodes for Overhead or Underground Lines American Society for Testing and
More informationSPEC 44. Wire and cable
SPEC 44 Wire and cable Applications SPEC 44 wire has a dual wall construction which combines the outstanding physical and electrical characteristics of radiation crosslinked polyalkene with the excellent
More informationTIGER BRAND MINING CABLES
TIGER BRAND MINING CABLES 5-kV TYPE SHD-GC & MP-GC -55 TYPE SHD-GC /C MOLD-CURED CPE JACKET 0 VOLTS 00% INSULATION LEVEL s Flexible tinned copper Flexible tinned copper with yellow polypropylene insulation
More informationUR Awg Butt Connector Box
19-26 Awg Butt Box Minnesota Mining (3M) Catalog Number Manufacturer Description Weight per unit Product Category Features Connection Type Maximum Insulation Wire Size Wire Type Descriptions Additional
More informationSBCA Industry Standards Subcommittee. Specification for 75 Ω Flexible RF Coaxial Drop Cable for Direct Broadcast Satellite (DBS) Installations
SBCA Industry Standards Subcommittee Document: SBCA Series 6 Recommended Practices Date of Issue: Specification for 75 Ω Flexible RF Coaxial Drop Cable for Direct Broadcast Satellite (DBS) Installations
More informationCABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES
CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES FOR CABLE CARRIERS EDITION 09-2012 Durable, reliable, cost-effective
More informationMongoose PT Platform Shale Shaker
Mongoose PT Platform Shale Shaker (UL VERSION) Revision: A By: MT Mongoose Platform Page 1 of 10 NOTE: Mongoose PT Platform Shale Shaker The attached is a reference to M-I SWACO s STANDARD Mongoose Platform
More informationSEALED CRIMP CONNECTORSTM
SEALED ELECTRICAL SYSTEM It s a Question of Integrity SEALED CRIMP CONNECTORSTM KRIMPA-SEAL TM PRODUCT LINE SEALED FOR QUALITY MINI ASSORTMENTS NSPA-9002 STARTER ASSORTMENTS TM NSPA-5002 NSPA-5003 NSPA-5003-T
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of
More information3/C UL AIRGUARD UL Type MV-105 (Replacement for Continuously Corrugated and Welded Type Cables*)
Design Parameters Description Three conductor cable with stranded copper conductors, extruded insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength EPROTENAX
More informationSBP Self Laminating Wire and Cable Markers
SBP Self Laminating Wire and Cable Markers Technical Datasheet TTDS-211 Revision 10 - April 2018 SBP is a clear vinyl film with a white thermal transfer printable area. On application, the clear film over-laminates
More informationSUBMITTAL COVER SHEET
SUBMITTAL COVER SHEET Project Name: Ft. Carson Range Control Facility and Fitness Center Contractor: Great American Electric, LLC Project No.: FTAE 1-900 Project Manager: Joshua Coufal Address: 78 S. Alton
More informationNORMATIVE REFERENCES
American National Standards Institute NORMATIVE REFERENCES ANSI C135.30 1988 (expired 1993) Zinc-Coated Ferrous Ground Rod Electrodes for Overhead or Underground Lines American Society for Testing and
More informationHigh Temperature Flexible Control Cable OLFLEX
High Temperature Flexible Control Cable 6 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 9080-60-Main Office: (60) 88-900-Outside Local Area: (800) 8-900-www.stevenengineering.com
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationWIRE & CABLE. 55 Wire High performance wire and cable
Applications 55 wire is insulated with modified radiation cross-linked ETFE polymer and combines the easy handling of a flexible wire, with excellent scrape abrasion and cut-through characteristics. The
More information3/C UL AIRGUARD UL Type MV-105 (Replacement for Continuously Corrugated and Welded (CCW) Type Cables*)
Design Parameters Description Three conductor cable with stranded copper conductors, extruded insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength EPROTENAX
More informationMEDIUM VOLTAGE
WWW.GENERGYCABLE.COM 800-308-1330 TM MEDIUM VOLTAGE MEDIUM VOLTAGE ASSEMBLIES Type SH Medium Voltage Power Cable Assemblies are designed for heavy-duty MV applications that require temporary or permanent
More informationAPR FEATURE PRODUCT OF THE MONTH. Prices good through August 31, 2015
APR 2015 FEATURE PRODUCT OF THE MONTH Prices good through August 31, 2015 Heat Shrink Tubing Heavy Wall - Sealant Lined Double wall with meltable sealant provides superior environmental protection, flame
More information