BURNDY EC&M TYPE YGA HYLUG Terminals. TYPE YGHA HYLUG Terminals. TYPE YGIB GROUNDLINK Connector. TYPE YGHS HYLINK Ground Splice
|
|
|
- Elvin Barton
- 6 years ago
- Views:
Transcription
1 Grounding TYPE YGHA HYLUG Terminals TYPE YGA HYLUG Terminals Grounding Heavy duty HYLUG irreversible compression terminals designed not only to carry short circuit load but to also withstand high mechanical stress. Each conductor element has an inspection probe hole to ensure proper cable insertion. UL467 Listed. Acceptable for direct burial. UL486A Listed. Prefilled with PENETROX compound and strip sealed. YGHA2C-2N YGHA25-2N YGHA26-2N YGHA28-2N YGHA29-2N YGHA34-2N kcmil 500 kcmil Irreversible compression HYLUG ground terminal specifically designed for ground applications. Each connector has an inspection probe hole to ensure proper cable insertion. UL467 Listed. Acceptable for direct burial. UL486A Listed. Prefilled with PENETROX compound and strip sealed. YGA2C-2N YGA25-2N YGA26-2N YGA28-2N YGA29-2N YGA34-2N TYPE YGIB GROUNDLINK Connector kcmil 500 kcmil TYPE YGHS HYLINK Ground Splice Heavy duty HYLINK ground splice designed not only to carry short circuit load but to also withstand high mechanical stress. Each conductor element has an inspection probe hole and a center stop to ensure proper cable insertion. UL467 Listed. Acceptable for direct burial in earth or concrete. UL486A Listed. Prefilled with PENETROX compound and strip sealed. 52 YGHS2C YGHS25 YGHS26 YGHS28 YGHS29 TYPE YGS HYLINK Ground Splices kcmil Irreversible compression HYLINK ground splices are specifically designed for ground applications. Each conductor element has an inspection probe hole and a center stop to ensure proper cable insertion. UL467 Listed. Acceptable for direct burial. UL486A Listed. Prefilled with PENETROX compound and strip sealed. YGS2C YGS25 YGS26 YGS28 YGS29 YGS34 kcmil 500 kcmil See HYGROUND Tool/Die Chart pages An irreversible compression ground connection which allows attachment to ground structural steel (standard [angled] or wide flange parallel) accomplished with a required 5-piece die set, Catalog PIBEAMKIT or UIBEAMKIT. Made of high conductivity wrought copper and comes prefilled with PENE - TROX compound and strip sealed. Order terminal mounting hardware separately. Standard Beams (Flange Angled) 2 Hole NEMA Spacing Copper Beam Conductor Flange Range Length Thickness YGIBS N 3.00 YGIBW N 2-4/0 AWG 3.00 YGIBS N kcmil YGIBW N 6.00 YGIBS N 3.00 YGIBW N 2-4/0 AWG 3.00 YGIBS N kcmil YGIBW N 6.00 YGIBS N 3.00 YGIBW /0 AWG 3.00 YGIBS N kcmil YGIBW N 6.00 YGIBS N 3.00 YGIBW28-502N 2-4/0 AWG 3.00 YGIBS N kcmil YGIBW N 6.00 YGIBS N 3.00 YGIBW N 2-4/0 AWG 3.00 YGIBS N kcmil YGIBW N 6.00 YGIBS N 3.00 YGIBW N 2-4/0 AWG 3.00 YGIBS N kcmil YGIBW N 6.00 See HYGROUND Tool/Die Chart pages Wide Flange Beams (Flange Parallel) 53
2 Grounding TYPE GSTUD-HY VERSITAIL HYGROUND Tool/Die Chart (Continued) Grounding Nom. Use with Compression GSTUD-HY/YGHP Catalog Rod Connector Catalog No. Assembly Conductor Number Size (Order Separately) Range YGHP2C2 6 sol. - GSTUD14HY 1/4 YGHP29C2 - kcmil YGHP34C2-500 kcmil GSTUD38HY 3/8 YGHP29C26 - kcmil YGHP34C kcmil GSTUD916HY 5/8 YGHP29C29 3/0 str. - kcmil YGHP34C kcmil GSTUD34HY 3/4 YGHP34C kcmil HYGROUND Tool/Die Chart Catalog Die No. of Number Index Y750/39/35 PAT750 Y46** Crimps YGA25-2N 12 U25RT U25RT U25RT 2 YGA26-2N 13 U26RT U26RT U26RT 2 YGA28-2N 15 U28RT U28RT U28RT 2 YGA29-2N 16 U29RT U29RT U29RT 2 YGA2C-2N 10 U2CRT U2CRT U2CRT 2 YGA34-2N 20 U34RT U34RT U34RT 4 YGHA25-2N 14 U27RT U27RT U27RT 1 YGHA26-2N 15 U28RT U28RT U28RT 1 YGHA28-2N 17 U30RT U30RT U30RT 2 YGHA29-2N 18 U31RT U31RT U31RT 2 YGHA2C-2N 11 U1CRT-1 U1CRT-1 U1CRT-1 1 YGHA34-2N 22 U36RT U36RT U36RT 3 YGHC26C2 O U-O UOP U-O 1 YGHC26C26 O U-O UOP U-O 1 YGHC29C U997 U997P U997 1 YGHC29C U997 U997P U997 1 YGHC2C2 C U-C U-C U-C 1 YGHC34C U1011* U1011* P YGHC34C U1011* U1011* P YGHC34C U1011* U1011* P YGHP29C2 997 U997 U997P U997 1 YGHP29C U997 U997P U997 1 YGHP29C U997 U997P U997 1 YGHP29C6W6W 997 U997 U997P U997 1 YGHP2C2 O UO UOP UO 1 YGHP2C6W6W O UO UOP UO 1 YGHP34C2 998 U998* U998P PU998 1 YGHP34C U998* U998P PU998 1 YGHP34C U998* U998P PU998 1 YGHP34C U1011* U1011* P YGHP58C2W2 997 U997 U997P U997 1 YGHR26C U1011* U1011* P YGHR26C PU998 PU998P P YGHR26C PU998 PU998P P YGHR26C PU998 PU998P P YGHR29C U1011* U1101* P YGHR29C PU998 PU998P P YGHR29C PU998 PU998P P YGHR29C PU998 PU998P P * Indicates that connector can only be installed with Y750 or Y46. Cannot be installed with Y35 or Y39. ** Where a U-die is recommended with the Y46, a PUADP-1 adaptor must be used. Catalog Die No. of Number Index Y750/39/35 PAT750 Y46** Crimps YGHR34C U1011* U1011* P YGHR34C U1011* U1011* P YGHR34C PU998 PU998P P YGHS25 14 U27RT U27RT U27RT 1 YGHS26 15 U28RT U28RT U28RT 1 YGHS28 17 U30RT U30RT U30RT 2 YGHS29 18 U31RT U31RT U31RT 2 YGHS2C 11 U1CRT-1 U1CRT-1 U1CRT-1 1 YGHS34 22 U36RT U36RT U36RT 3 YGIB (All) 1105 UIBEAMKIT UIBEAMKIT PIBEAMKIT varies YGL29C2 997/O U997/U-O U997P/UOP U997/U-O 1 YGL29C U997 U997P U997 1 YGL2C2 O U-O UOP U-O 1 YGL34C2 998/O U998/U-O* U998P/UOP PU998/U-C 1 YGL34C29 998/O U998/U-O* U998P/UOP PU998/U-C 1 YGL34C U1011* U1011* P YGLR29C /1011 U997/U1011 U997P/U1011 U997/U YGLR29C U997 U997P U997 1 YGLR29C34 997/1011 U997/U1011* U997P/U1011 PU998 1 YGLR29C58 997/998 U997/U1011* U997P/U1011 PU998 1 YGLR34C /1011 U997/U1011 U997P/U1011 U997/U YGLR34C /998 U1011* U1011* PU998 1 YGLR34C U1011* U1011* U YGLR34C58 998/1011 U998/U1011* U998P/U1011 PU998 1 YGS25 12 U25RT U25RT U25RT 2 YGS26 13 U26RT U26RT U26RT 2 YGS28 15 U28RT U28RT U28RT 2 YGS29 16 U29RT U29RT U29RT 2 YGS2C 10 U2CRT U2CRT U2CRT 2 YGS34 20 U34RT U34RT U34RT 4 * Indicates that connector can only be installed with Y750 or Y46. Cannot be installed with Y35 or Y39. ** Where a U-die is recommended with the Y46, a PUADP-1 adaptor must be used. (HYGROUND Tool/Die Chart continued on next page) 54 55
3 Small Compression TYPE YSM HYLINK Splice Uninsulated Parallel Splice TYPE YSCM HYLINK Splice Color-Coded Uninsulated Parallel Splice 90 HYLINK type YSM seamless parallel splice connector permits wires to be laid parallel inside the connector and spliced together with BURNDY s compression HYTOOL. Each YSM connector accommodates a wide combination of round, square, and rectangular copper conductors that have a total combined circular mil area listed in the table below. The conductors to be spliced must physically fit within the splice without being forced. Catalog Circular Mil. Range Wire Strip Number Min. Max. Length YSM ,909 5/16 YSM ,107 5/16 YSM10 4,107 10,380 7/16 YSM8C 6,088 16,864 1/2 YSM6C 10,380 26,83 1/2 YSM4C 26,813 42,613 9/16 YSM2C 42,613 66,832 11/16 YSM1C 66,832 81,807 11/16 YSM25 81, ,110 3/4 YSM26 104, ,650 7/8 YSM27 133, ,332 7/8 YSM28 167, ,954 15/16 Type YSCM HYLINK seamless parallel splice connectors permit stranded wires to be laid parallel inside the connector and spliced together with BURNDY compression tools. Each YSCM connector accommodates a wide range of conductors and is color-coded to ensure proper tool and die match. YSCM connectors are UL486A Listed for applications up to 600V and CSA Certified. Recommended Installation Conductor Range Dimensions Tooling* Cable Inch OUR840, Y35, Y750, Wire Catalog Circular Mils L O.D. Color Die Y500CTHS, PAT750 Strip Number Min. Max. ±.03 ±.01 Code Index PAT600 Series Series Length YSCM17 13,060 16, Red 49 X8CRT, W8CRT U8CRT 11/16 YSCM27 16,910 26, Blue 7 X5CRT, W5CRT U5CRT 11/16 YSCM , Gray 8 X4CRT, W4CRT U4CRT 11/16 YSCM66 42,750 66, Brown 10 X2CRT, W2CRT U2CRT 3/4 YSCM80 67,980 80, Green 11 X1CRT, W1CRT U1CRT-1 3/4 YSCM104 82, , Pink 12 X25RT, W25RT U25RT 15/16 YSCM , , Black 13 X26RT, W26RT U26RT 1-1/16 YSCM , , Orange 14 X27RT, W27RT U27RT 1-1/16 YSCM , , Purple 15 X28RT, W28RT U28RT 1-1/16 YSCM , Yellow 16 X29RT, W29RT U29RT 1-1/16 * Recommended strip length. Strip length dependant on size, number of wires and insulation thickness. ** Refer to Circular Mil Table per ASTM B8 for total Class B Circular Mil calculations. TYPE YA-L One Hole HYLUG Standard Barrel Lugs for Copper Cable UL Listed 90 C 600 Volts to 35 kv T L Copper compression terminals for regular-duty applications. Inspection hole ensures proper insertion of cable. Tin-plated. Marked with die index and color code. Conductor Stud Figure Catalog *** Hole Tongue Dimensions Number AWG mm 2 Navy Size Width (B) (T) (L) YA8CL-BOX 37/24 8 Weld YA8C-L1-BOX 8 AWG 10 6 Sol. 23 1/ YA6CL-BOX 6 AWG 1/ YA5CL-BOX 5 AWG 30 1/ YA4CL-BOX 4 AWG 40 1/ YA4CL6-BOX 4 AWG 40 1/ YA3CL 3 Str./2 Sol / YA2CL-BOX 2 AWG / YA2CL6-BOX 2 AWG / YA1CL-BOX 1 AWG / YA1CL6-BOX 1 AWG / YA25L6-BOX 1/0 AWG 100 1/ YA26L-BOX 2/0 AWG / YA26L6-BOX 2/0 AWG / YA27L-BOX 3/0 AWG 150 1/ YA28L-BOX 4/0 AWG 200 1/ YA29L-BOX kcmil 1/ YA30L 300 kcmil / YA31L 350 kcmil / YA32L 400 kcmil 400 5/ YA34L 500 kcmil 240 5/ YA36L 600 kcmil 300 5/ YA38L 700 kcmil 5/ YA39L 750 kcmil 5/ YA40L 800 kcmil 400 5/ YA44L 1000 kcmil 500 5/ *** The mm 2 conductor sizes listed are the recommendations for Class 2 conductor. The mm 2 conductor size listed is for both Class 2 and Class 5 conductor. For applications greater than 2000 Volts, consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Y1MRTC (1) YA8CL-BOX Y8MRB-(1) W8CVT (1) W8CVT (1) W8CRT (1) W8CRT (1) X8CRT (1) X8CRT (1) YA8C-L1-BOX U8CRT (1) Red 49 7/16 Y1MRTC (1) YA6CL-BOX W5CVT (1) W5CVT (1) W5CRT (1) W5CRT (1) X5CRT (1) X5CRT (1) X8CART (1) X8CART (1) U5CRT (1) Blue 7 7/8 (One Hole HYLUG Standard Barrel Installation Tooling Chart continued on next page) B 91
4 TYPE YA-L One Hole HYLUG Installation Tooling Chart (Continued) 92 Y1MRTC (1) W5CRT (1) W5CRT (1) YA5CL-BOX W5CVT (1) X5CRT (1) U5CRT (1) Blue 7 7/8 X5CRT (1) W5CVT (1) YA4CL-BOX W4CVT (1) W4CVT (1) U4CRT (1) W4CRT (1) W4CRT (1) U6CABT (1) X4CRT (1) X4CRT (1) YA4CL6-BOX Gray 8 7/8 YA3CL W3CRT (1) W3CRT (1) U3CRT (1) White 9 15/16 YA2CL-BOX W2CVT (1) W2CVT (1) W2CRT (1) W2CRT (1) X2CRT (1) X2CRT (1) YA2CL6-BOX U2CRT (1) Brown 10 15/16 YA1CL-BOX W1CVT (1) W1CVT (1) U1CRT-1 (1) W1CRT-1 (1) W1CRT-1 (1) U4CABT (1) X1CRT-1 (1) X1CRT-1 (1) YA1CL6-BOX Green 11 15/16 YA25L6-BOX W25VT (2) W25VT (2) U25RT (1) W25RT (2) W25RT (2) U2CABT (1) X25RT (2) X25RT (2) Pink 12 15/16 YA26L-BOX W26VT (2) W26VT (2) W26RT (2) W26RT (2) U26RT (1) Black 13 1 X26RT (2) X26RT (2) YA26L6-BOX * Use PUADP-1 adapter with U dies in Y46 HYPRESS ** P-RT die sets for use in Y46 HYPRESS only. PUADP-1 adapter not requuired. See tooling section of this catalog for complete tool and die listings. (One Hole HYLUG Standard Barrel Installation Tooling Chart continued on next page) TYPE YA-L One Hole HYLUG Installation Tooling Chart (Continued) W27VT (2) W27VT (2) YA27L-BOX W27RT (2) W27RT (2) U27RT (1) Orange /16 X27RT (3) X27RT (3) W28VT (2) W28VT (2) YA28L-BOX W28RT (2) W28RT (2) U28RT (1) Purple /8 X28RT (2) X28RT (3) YA29L-BOX W29VT (2) W29VT (2) W29RT (2) X29RT (4) X29RT (4) U29RT (1) Yellow /8 YA30L W30VT (2) U30RT (2) W30VT (2) W30RT (2) U28ART (2) White /16 YA31L W31VT (2) U31RT (2) W31VT (2) W31RT (2) U29RT (2) Red /16 YA32L W32VT (2) U32RT (2) W32VT (2) W32RT (2) U30ART (2) Blue /4 YA34L W34VT (2) U34RT (2) W34VT (2) W34RT (2) U31ART (2) Brown /16 YA36L U36RT (2) Green /4 YA38L U38RT (2) Pink /16 YA39L U39RT (2) P39RT (2) ** Black /16 YA40L P40RT(3) Orange /16 ** Y644MBH (1) PAT644-18V (1) YA44L P44RT(3) ** White /16 * Use PUADP-1 adapter with U dies in Y46 HYPRESS ** P-RT die sets for use in Y46 HYPRESS only. PUADP-1 adapter not requuired. See tooling section of this catalog for complete tool and die listings. 93
5 TYPES YA-2N, Y-2TC Two Hole HYLUG Code Conductor Long Barrel UL Listed 90 C 600 Volts to 35 kv Conductor Stud Stud Figure Catalog *** Hole Hole Tongue Dimensions Number AWG mm 2 Navy Size Spacing Width (B) (T) (L) 8 Str. YA8C2TC14 6 Sol /4 5/ /24 YA6C2N* 6 AWG 1/2 1-3/ YA4C2N* 4 AWG 40 1/2 1-3/ Str. YA3C2N 3 AWG /2 1-3/ Sol. YA2C2N* 2 AWG /2 1-3/ YA1C2N* 1 AWG /2 1-3/ YA252N* 1/0 AWG 100 1/2 1-3/ YA262N* 2/0 AWG /2 1-3/ YA272N* 3/0 AWG 150 1/2 1-3/ YA282N* 4/0 AWG 200 1/2 1-3/ YA292N* kcmil 1/2 1-3/ YA302N* 300 kcmil /2 1-3/ YA312N* 350 kcmil /2 1-3/ YA322N* 400 kcmil 400 1/2 1-3/ YA342N* 500 kcmil 240 1/2 1-3/ *** The mm 2 conductor sizes listed are the recommendations for Class 2 conductor. The mm 2 conductor size listed here is for Class 2 and Class 5 conductor. * Available undrilled. Add suffix "U" to catalog number (example: YA25U). For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Y8MRB-1 (2) YA8C2TC14 W8CVT (2) W8CVT (2) W8CRT (2) W8CRT (2) X8CRT (2) X8CRT (2) U8CRT (1) Red 49 1 YA6C2N W5CVT (2) W5CVT (2) W5CRT (2) W5CRT (2) U5CRT (2) X5CRT (2) X5CRT (2) U8CABT (2) Blue 7 1-3/16 X8CART (2) X8CART (2) See tooling section of Master Catalog for complete tool and die listings. * Use PUADP-1 adaptor with "U" -dies in Y46 HYPRESS. (Two Hole HYLUG Long Barrel Installation Tooling Chart continued on next page) TYPES YA-2N, Y-2TC Two Hole HYLUG Installation Tooling Chart (Continued) Y1MRTC (4) YA4C2N W4CVT (2) W4CVT (2) U4CRT (2) W4CRT (2) W4CRT (2) U6CABT (2) Gray 8 1-3/16 YA3C2N X4CRT (2) X4CRT (2) W3CRT (2) W3CRT (2) U3CRT (2) White 9 1-5/16 YA2C2N Y1MRTC (4) W2CVT (2) W2CVT (2) W2CRT (2) W2CRT (2) X2CRT (2) X2CRT (2) U2CRT (2) Brown /16 Y1MRTC (4) YA1C2N W1CVT (2) W1CVT (2) U1CRT-1 (2) W1CRT-1 (2) W1CRT-1 (2) U4CABT (2) X1CRT-1 (2) X1CRT-1 (2) Green /2 YA252N W25VT (4) W25VT (4) U25RT (2) W25RT (4) W25RT (4) MRC840 (4) U2CABT (2) X25RT (4) X25RT (4) Pink /16 W26VT (4) W26VT (4) YA262N W26RT (4) W26RT (4) U26RT (2) Black /16 X26RT (4) X26RT (4) YA272N W26VT (4) W26VT (4) W26RT (4) W26RT (4) MRC840 (4) X26RT (4) X26RT (4) U26RT (2) Black /16 W27VT (4) W27VT (4) YA282N W27RT (4) W27RT (4) U27RT (2) Orange /16 X27RT (6) X27RT (6) YA292N W28VT (4) W28VT (4) W28RT (4) W28RT (4) X28RT (6) X28RT (6) U28RT (2) Purple /16 W29VT (4) YA302N W30VT (4) W29RT (4) U29RT (2) Yellow /16 X29RT (8) W30VT (4) U30RT (4) YA312N W31VT (4) White 17 2 W30RT (4) U28ART (4) W31VT (4) U31RT (4) YA322N W32VT (4) Red /16 W31RT (4) U29ART (4) YA342N Y81KFT (4) W34VT (4) U34RT (4) W34VT (4) Y81KFTMBH (4) W34RT (4) U31ART (4) Brown /2 PAT81KFT-18V (4) See tooling section of Master Catalog for complete tool and die listings. * Use PUADP-1 adaptor with "U" -dies in Y46 HYPRESS
6 TYPE HS-FR Thin-Wall Heat Shrink Fire Retardant Heat Shrink Tubing UL Recognized to 600 V TYPE HS-H-PF Heavy Wall Heat Shrink Tubing Cross-linked Polyolefin Cut Lengths and 4 Foot Sticks Type HS-FR is a flexible polyvinyl chloride thin-wall heat-shrink. Offering insulating, color identification and strain relieving properties for terminations and splices. The 2:1 shrink ratio allows for faster shrink recovery, covering wire sizes: 16 AWG to 1000 kcmil. UL Recognized, 105 C, 600 V, operating temperatures from -20 C to 105 C with a shrink temperature of 135 C. How to Order: B = Black, G = Green, W = White, BLU = Blue, R = Red and Y = Yellow (example: HSB18FR). Conductor Standard Catalog I.D. I.D. After Wall Range Reel Size Number Expanded Recovery Thickness Code Flex (Feet) HS_18FR HS_18FR HS_14FR HS_14FR.025 HS_38FR HS_38FR HS_12FR HS_12FR HS_34FR /0-3/0 2-1/0 HS_34FR HS_100FR /0-3/0 1/0-3/0 HS_100FR HS_112FR HS_112FR HS_200FR HS_200FR Shrink temperature is 135 C (275 F), For best results, move heat gun along the length of heat shrink to avoid concentrations. To extend useful life, store material below 70 F. For additional Heat Shrinkable Tubing see "URD" section Type RYAC and RK169-2, RK170-2 in this section. MIL-I-23053/ Volts Type HS-H-PF is a heavy wall, flame retardant heat shrink tubing made of cross-linked polyolefin. The shrink ratio is 3:1, and the inside diameter is coated with an adhesive sealant to protect against moisture and corrosion. UL486D Listed for direct burial applications. Accommodates 14 AWG-500 kcmil conductors. Operating temperatures from -55 C to 135 C with a shrink temperature of 120 C. Nom. No. Nom. Min. Max. Wall of Pcs. Catalog Dia. Exp. Recov. Thickness Conductor Per Number Length In. I.D. In. I.D. In. In. Range Pkg. HSB35H3PF25 3 HSB35H6PF HSB35H48PF5 4 5 HSB34H6PF10 6 HSB34H9PF HSB34H48PF5 4 5 HSB110H6PF5 6 HSB110H9PF /0 5 HSB110H48PF5 4 HSB150H9PF3 9 HSB150H12PF / HSB150H48PF HSB200H9PF2 9 HSB200H12PF HSB200H48PF2 4 Available in Black only. TYPE HSIC-FR Heavy Wall Heat Shrinkable End Cap UL Listed to 600 V TYPE HSC-FR VISI-SHRINK Fire Retardant Clear Heat Shrink Tubing UL Listed to 600 V Type HSC-FR is a flexible polyvinyl chloride clear heat shrink tubing. Excellent flame retardant properties and a 2:1 shrink ratio, the VISI-SHRINK tubing enables inspectors to read die index embossments on installed connectors easily. UL Recognized, 105 C, 600V, the operating temperature ranges from -20 C to 105 C with a shrink temperature of 170 C. Conductor Standard Catalog I.D. I.D. After Wall Range Reel Size Number Expanded Recovery Thickness Code Flex (Feet) HSC18FR HSC14FR HSC38FR HSC12FR HSC34FR /0-1/ HSC100FR /0 4/0-1/0 HSC112FR HSC200FR Type HSIC-FR, Heat Shrink Insulating End Cap Fire Retardant is a heavy wall, fire retardant end cap made of cross-linked thermally stabilized black polyolefin. Used to insulate exposed conductors in energized applications.the 3:1 shrink ratio offers greater range, accommodating copper wire sizes, 8 AWG through 0 + kcmil. Performs effectively over lead, aluminum, steel, polyethylene, EPR, and PVC jacketed materials. Blue thermal chromatic lines disappear indicating correct installation temperature and provides inspectability. I.D. adhesive provides superior moisture and weather resistant characteristics. Internal Wall Length 600 V Diameter Thickness Catalog Cable (Min.) (Max.) Rec. ±20% Number Code Flex Exp. Rec. Exp. ±20% Exp. Rec. HSIC8-1FR HSIC4-40FR 4-4/0 4-2/ HSIC10-500FR 1/ kcmil kcmil HSIC FR 3/ /0-646 kcmil kcmil HSIC200FR kcmil kcmil HSIC269FR kcmil HSIC350FR 1 kcmil (min.)
7 Tooling Y10-22 Plier Type HYTOOL Combination Crimper, Cutter and Stripper Comfort grip handles fit hands comfortably making the tool easy to use. Crimps full range of insulated terminals and splices AWG Crimps full range of uninsulated terminals and splices AWG Full range insulation strippers for wire sizes AWG Cut off dies for common size mild steel and non-ferrous screws Weight: 11 oz. Length: 8-5/8 Conductor Range: AWG MR15, MR18, MR20 HYTOOL Full Cycle Ratchet Hand Tools Heavy-duty forged steel frame Full cycle ratchet to assure properly crimped connectors and splices Comfort grip handles Compact, narrow nose to work in confined areas Easy groove identification with color coded dies Recommended terminals and splices are UL Listed Weight: 1.10 lbs. Length: 8.86 Width Open: 5.90 Width Closed: 2.50 Conductor Range: AWG 160 Y1MR-TC HYTOOL Full Cycle Ratchet Hand Tool Molded comfort grips reduce fatigue during continuous use Ratchet mechanism assures a complete crimp every time Emergency release mechanism allows tool to be opened in case of mistaken die choice or to reposition tool Rotating die is color coded to match color coding on connectors Die index embossment allows permanent inspectability of installed connectors to ensure consistently reliable and dependable connections Weight: 13.5 oz. Length: 9-3/4 Width:.73 Conductor Range: 8-1 Code Conductor 2 solid & 3 stranded 8-2 Class 1 Flex Up to 6-6 (Brown) YC-L Type C-TAP Y1MRTCKIT Kit Contains: Y1MRTC Full-Cycle Ratchet Tool Sturdy Metal Carrying Case Terminals: YA2C2TC38, YA2CL2TC14, YA2CL2TC38, YA3C2TC38, YA4CL2TC14, YA4CL2TC38, YA6C2TC38, YA6CL2TC14, YA6CL2TC14E1, YA6CL2TC14E2, YA6CL2TC38, YA8CL2TC14, YA8CL2TC38, YAV6CL2TC14E2FX, YAV6CL2TC14 Thin-Wall C-Taps: YC4L12 OUR840 HYTOOL Full Cycle Hand Held Ratchet Tool One hand, full cycle ratchet tool for Cu, Al, and ACSR Great for use in tight spaces where other tools can t fit 8-4/0 Al and 8 - Cu terminals and splices on code conductor W28K cutter die permits use of tool as a cable cutter Uses reduced handle force on X dies and select W dies Proper crimps are assured with full cycle ratchet mechanism UL Listed connections when color coded dies are used to install recommended BURNDY terminals and splices Weight: 2 lbs. 14 oz. Length: 13 Max. Crimp Force: 8,000 lbs. Max. Handle Force: 8 lbs. approx. Conductor Range: 8-4/0 AWG Al 8 - kcmil Cu Tooling 161
U36RT (4) 600 kcmil 300 YA362TC U32ART (4) Green /4 YA362TC / YA362TC
URNDY TWO HOE HYUG CODE CONDUCTOR ONG ARRE (Continued) T T T 45 Fig. 1 Fig. 2 Fig. 3 90 Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless
Installation Tooling System Taps Thin-Wall C-taps Run=Tap, AWG only W28VT PURPLE 15 U997 ORANGE 997 U654 PURPLE 654
Compression Connections Die Index Chart BURNDY C-10 Conductor Lugs & Splices One & Two Hole AWG Flex Die Color Index #8/#6 sol #8 #6 #6 #4 #4 #3/#2 sol #2 #2 #1 #1 1/0 1/0 2/0 2/0 3/0 3/0 4/0 4/0 250 300
W30VT (2) U30RT (2) 300 kcmil 150
URNDY ONE HOE HYUG CODE CONDUCTOR STANDARD ARRE (Continued) 90 T T T 45 Fig. 1 Fig. 2 Fig. 3 C-12 Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless
Compression Connections BURNDY 12-TON U DIES* W DIES. BURNDY Die Sets
Compression Connections U Die and W Die Sets 1-TON U DIES* BURNDY Die Sets Fits Y35, Y39, Y750 Series, PAT750-18V Series, PAT46-18V, Y46 (W/PUADP-1 Adapter) Wire Size Copper Aluminum Small #8 Str. U8CRT
Electro-Tin Plated. Features & Benefits
Copper Compression Slotted Standard Barrel /Flex C-80 HYLUG STANDARD BARREL TYPES YA-L2TC-SL AND YAV-L2TC-FXSL Up to 35 kv on most bus bars. the terminal to conform to spacing requirements combinations
1.05 Y1MR (1) W5CRT (1) W5CRT (1) U5CRT (1) #6 AWG YA6CL6-BOX MY29-3 (1) X5CRT (1) X5CRT (1) UBCABT (1)
URNDY ONE HOE HYUG CODE CONDUCTOR STANDARD ARRE (Continued) 90 T T T 45 Fig. 1 Fig. 2 Fig. 3 C-10 Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless
The Circumferential Crimp. Circumferential compression is solid and symmetrical. No sharp flash.
TABLE OF CONTENTS Compression Connectors Connector Selector Chart...C-3 Compression Connectors Information...C-4 Ampacity Rating, Selection and Use, Tooling...C-4 Installation Hardware, Industry Standards...C-4
Shrink temperature of 120 C. Rated for 600V, 90 C continuous use. T&B recommended up to 1kV. HS Series Specifications
HS Series Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements of U.R.D., submersible,
Shrink temperature of 120 C. High-impact, abrasion, corrosion and chemical resistance. Rated for 600V, 90 C continuous use
HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements
Heat-Shrinkable Tubing
HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements
Color-Keyed. Compression Connector System. Table of Contents
Table of Contents The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree of reliability in electrical wiring. This method allows electrical
Overview The Thomas & Betts Method is Better. Just Four Easy Steps to a Perfect Connection! Step 1. Step 2
Overview The Thomas & Betts Method is Better. The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree of reliability in electrical wiring. This
Connection by Compression
Connection by Compression.............. -5 Color-Keyed Connectors................ -9 Connectors for Copper Conductor........ 0-9 Cast Copper Connectors for Copper Conductor.................. 0- Flag Connectors
Connection by Compression
Connection by Compression.............. -5 Color-Keyed Connectors................ -9 Connectors for Copper Conductor........ 0-9 Cast Copper Connectors for Copper Conductor.................. 0- Flag Connectors
Burndy Die Designation Die Code Cat. No.
Color-Keyed Tools, s and Kits Installing s Insert s for TBM6H Hydraulic Head and Type OD Tools Insert s for Hydraulic Heads JBB, 00A, TBMM, TBMMC, TBMCR-LI, TBMRH, TBM5I, TBM5CR-LI, BPLTBSCR, BPLT5BSCR
E-Z-Ground Grounding Connectors
2 2 2 4 9 6 7 6 0 9 4 8 4 Thomas & Betts offers its complete line of grid-ground compression connectors. Our E-Z-Ground connectors are designed for direct burial and offer a safe, efficient alternative
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No. Box of V. Carton of 1, Gray.
Wire-Nut Wire Connectors Yellow and red Wire-Nut Wire Connectors can easily be applied using the Twist-a-Nut Screwdriver. Five color-coded models cover wire sizes from 22 to 6 AWG Fixed, square-wire spring
Product Specification provides test and performance results for insulated terminals and splices for Class 1 E Nuclear applications.
This specification covers the requirements for application of PIDG terminals, splices, and end caps in various operating environments. Each consists of a precision formed metal wire barrel and a copper
Overview Special Lugs for Special Problems Angled, Shaped and Trimmed the Way You Need Them
Special Lugs for Special Problems Angled, Shaped and Trimmed the Way You Need Them Thomas & Betts can solve your difficult wire bending and terminating problems in confined power distribution panels, switchgear
BURNDY Compression. ONE HOLE HYLUG FLEX CONDUCTOR STANDARD BARREL (Continued) Fig. 2 Fig. 3. Conductor
URNDY ONE HOE HYUG FEX CONDUCOR SANDARD ARRE (Continued) Fig. 1 90 45 Fig. 2 Fig. 3 C-26 Conductor Installation ooling Stud Figure Mechanical Hydraulic Wire *** Hole ongue Dimensions Dieless MD6, OUR840,
JUN FEATURE 2014 PRODUCT OF THE
JUN 2014 FEATURE PRODUCT OF THE MONTHPage 1 Tools Self-Igniting Butane Torches Torches / Crimpers / Stripper / Heat Gun Up to 2500 flame temperature Safety lock and continuous burning lock With Piezo ignition,
Small HYDENT CatalOG. Connecting Power to Your World. Trust the Burndy Engineered System
Trust the Burndy Engineered System The BURNDY Engineered System of coordinating dies, connectors and tools are always designed to work together and engineered to meet stringent, accepted quality standards.
Double thick tongue. Tongue Wire Stud Hole CT-930, CT-930CH, S4-10R-E
Type S-R Seamless tubular barrel Beveled wire lead-in Tubular Ring Terminal, Non-Insulated Double thick tongue A. B.Cable Ties B L T W Inspection Window Min. Tensile Strength of Tubular Ring Terminals
WIRE & CABLE FILS ET CÂBLES ALAMBRES Y CABLES. 63 Technical information. 64 Primary Wire. 66 Brake Cable & Portable Extension Cable
05 63 Technical information 64 Primary Wire 66 Brake Cable & Portable Extension Cable 67 SXL & Bonded Wire WIRE & CABLE FILS ET CÂBLES 68 Trailer Cable 70 Battery Cable 71 Welding Cable 72 Booster Cable
General Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
Thru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
FTZ New Products COOL SEAL CLEAR SEAL EXTREME SEAL CORRECT CONNECT MPC CRIMP TOOL SEAMLESS COPPER LUGS. Qua lity Sta tement
FTZ New Products (See page 6) (See page 6) (See page 14) (See page 50) COOL SEAL The patented heat-less, solderless terminal that saves time and money. CLEAR SEAL The latest advancement in heat shrink
Carton of 1, B. Min. 2-,34mm 2 Max. 3-1,5mm V 22 to 14 AWG Min. 2 #22 Max. 3 #16. ,34mm 2 to 2,5mm 2. Min.
Wire-Nut Five color-coded models cover wire sizes from 22 to 6 AWG Fixed, square-wire spring creates its own threads maintains a secure positive grip that will not relax over time No pre-twisting required
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Product Facts For single and multiple wire applications Nylon or vinyl or
Crimping and Cutting Tool for Connectors, Accommodates wire. From No. 10 to 22 Awg CRIMPING/CUTTING TOOL FOR CONNECTORS. from No.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1005 Crimping/Cutting Tool For Connectors Klein Tools Catalog Number 1005 Manufacturer Klein Tools Description Crimping
Connector, Tool and Die Chart
Connector, Tool and Die Chart 13642M (13400) TBM12 Connector Size TBM25S TBM4S TBM8-750/-1 TBM-8 / 8S TBM-5 / 5S TBM6 / 6S (25000) Hydraulic Head Hydraulic Head Code Color-Keyed TBM8 Die TBM5 Die Cat.
JCN cables. The. splice is an
Molded Rubber Splices 15kV 3M molded rubber QS and QS-II kits are inline splices made from specially formulated, peroxide-cured, EPDM rubbers to ensure a stable seal and a splice that will last the life
Resist water & condensation Resist salt & other contaminants Resist wire pull out & current leakage
Heat Seal & Resist water & condensation Resist salt & other contaminants Resist wire pull out & current leakage Who Uses Heat Shrink : Heavy Duty Trucking Marine & RV Plant Maintenance Departments OEM
CIR (Crush & Impact Resistant) VFD Power Cable
37-2 CIRVFD CIR (Crush & Impact Resistant) VFD Power Cable Gexol Insulated Three Conductor 2kV Rated 90 C UL Listed as Type TC-ER Power Conductors (x3) Soft annealed flexible stranded tinned copper per
Panduit Lithium-Ion. Powered Crimping Tools INDUSTRY FIRST
INDUSTRY FIRST Panduit Lithium-Ion Powered Crimping Tools Panduit offers a broad range of crimping tools featuring Milwaukee Electric Tool s M8 XC high capacity lithium-ion batteries. First in the industry
The Spec-Kon. Example: KV18-6R-M (18) AWG (14) AWG (10) AWG (8) 8 AWG (6) 6 AWG (4) 4 AWG (2) 2 AWG
Overview Crimp, Disconnects, and Splices Thomas & Betts is pleased to introduce crimp terminals, disconnects, and splices. Ideal for OE applications, the line can be used anywhere a high number of terminations
COPALUM Terminals and Splices (For Solid & Stranded Aluminum or Copper Wire)
Product Facts Bar Crimp Technique Terminals and Splices for aluminum-to-aluminum and aluminum-to-copper stripped wire applications Terminates stripped, stranded and solid (round or rectangular) aluminum
Tools. Battpac. Battpac. Battery Powered Compression and Cutting Tools. TBM54BSCT Cutting Tool. Tools for Industrial Electrical Applications
for Industrial Electrical Applications Battery Powered Compression and Cutting Put some power in your grip and pick up a tool from Thomas & Betts. Lightweight, including the battery, tools put the power
INTERMEDIATE METAL CONDUIT
PRODUCT GUIDE 08 CONDUIT PIPES CONDUIT FITTINGS FITTINGS FOR FLEXIBLE CONDUITS METALLIC ELECTRICAL BOXES AND COVERS CONDUIT BODIES WEATHERPROOF BOXES AND COVERS CHANNELS & SUPPORTS METAL ENCLOSURES CHANNELS
Low Voltage Splices, 1000 V or less
Low Splices, 000 V or less For installations from 20 V to kv, 3M offers several low voltage splice options, including 3M-developed cold shrink technology, heat shrink, resin and tape. 3M Low Splices are
CRIMP CONNECTORS & ACCESSORIES Universal Crimp Termination System. Heavy-duty lightweight stamped steel frame.
Universal Crimp Termination System Extron Universal Crimp Tool Four in One Coax BNC Connector Crimp Tool The affordable heavy-duty Universal BNC Crimp Tool was designed by Extron to be the single tool
Tools. TR-482 Ratchet. TH-450 Scissors Style The most versatile heavy-duty tool we ve ever offered. Made of 1.40" (35,5 mm) highstrength,
Tools TH-440 Scissors Style A compact, high-quality tool designed to perform the six most common electrical wiring functions. Made of 1.125" (28,57 mm) heat-treated carbon steel Handles a variety of terminal
NiAc Terminals and Splices
Perma-Seal NiAc Terminals and Splices 22 8 AWG 22 8 AWG Size SA-22-06 6 SA-22-08 8 SA-22-0 0 SA-222-4 /4 6 4 AWG SB-27-06 6 SB-27-08 8 Size SA-226-8 /8 SA-25-06 6 SA-25-08 8 SA-25-0 0 SB-28-8 /8 SB-227-06
TABLE OF CONTENTS. Types YAE-Z BOX & YAE-Z (Nylon - Flange) Types YAV-T-F BOX & YAV-T-F (Bare) Types YAV-H-F BOX, YAV-H-F, & YAV-Z (Bare - Shroud)
BURNDY Small Terminals TABLE OF CONTENTS General Information Mil. Spec. Equivalents RING TERMINALS Types T & YAD (Bare) Type YAD (Bare) Types TP & BA (Vinyl) Types TN & YAES (Nylon) Type YAE-G (Nylon)
Pliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
Professional Electrician Pliers
Professional Electrician Pliers n Professional quality tools for maximum life and performance n Forged of vanadium alloy steel provides excellent durability n Precision mated blades for easy cutting n
TE Connectivity Wire Connectors
Pre-insulated wire connectors have been designed specifically to answer the need for inexpensive, insulated electrical terminations. They can be used in almost every type of residential and commercial
Manual Crimp Tool T&B Catalog Number: TBM4S UPC Number: Status:
Manual Crimp Tool T&B Catalog Number: TBM4S UPC Number: 78621089728 Status: Active Description: Dieless adjustable crimper. Features Application General Tool Type Tooling Functionality Tooling Die Selection
SEALED CRIMP CONNECTORSTM
SEALED ELECTRICAL SYSTEM It s a Question of Integrity SEALED CRIMP CONNECTORSTM KRIMPA-SEAL TM PRODUCT LINE SEALED FOR QUALITY MINI ASSORTMENTS NSPA-9002 STARTER ASSORTMENTS TM NSPA-5002 NSPA-5003 NSPA-5003-T
Chamfered/Funneled Terminal Barrel Entry
Why Sta-Kon Terminals Are Better Chamfered Funnel Barrel Entry. Selectively annealed long barrel. Longer barrel design. Colour-code Fluoropolymer, Nylon or Vinyl Insulators. Brazed or overlapping seams.
Crimpers and Wire Prep Tools
Crimpers and Wire Prep Tools utomoti t rmar t an a ut AUTOMOTIVE METRI-PACK, MICRO-PACK & HEAT SHRINK CONNECTORS Circular Contact C Ratcheted crimp tool Crimp circular contacts Metri-Pack Unsealed 3184
COMMON WORK RESULTS FOR INTEGRATED AUTOMATION DESIGN AND CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Professional Electrician Pliers
Professional Electrician Pliers n Professional quality tools for maximum life and performance n Forged of vanadium alloy steel provides excellent durability n Precision mated blades for easy cutting n
Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and
Catalog Numbering System SOR-8BH S= Solderless Terminals and Connectors
CLASSIFICATION: Catalog Numbering System SOR-8BH S= Solderless Terminals and Connectors INSULATION: A= Butt-Connector I=Insulated B= Block Spade O=Non-Insulated C= Closed End Connector F= Fully-Insulated
Descriptions RoHS Compatible; Applicable Standard ASTM B3, ASTM B8, ASTM B787, Federal Specification A-A-59544, NFPA 70, NEMA WC-70
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 THHN12S0LBK500 THHN 12 Sol Black 500 Southwire Company Catalog Number Manufacturer Description Weight per unit Product
THHN12S0LWHBL500 THHN 12 Sol White/Blue Striped 500
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 THHN12S0LWHBL500 THHN 12 Sol White/Blue Striped 500 Southwire Company Catalog Number Manufacturer Description Weight per
Series. The Journeyman line of hand tools represents the best of Klein quality and workmanship combined with the latest innovations in handle design.
The line of hand tools represents the best of Klein quality and workmanship combined with the latest innovations in handle design. State-of-the-art dual material molding process Induction hardened cutting
SEALED CRIMP CONNECTORS SEALED SOLDER CONNECTORS SEALED CRIMP & SOLDER CONNECTORS SEALED MULTIPLE WIRE CONNECTORS SEALED STEP-DOWN BUTT CONNECTORS SEALED HEAT SHRINK TUBING SEALED SOLDER SYSTEM FOR BATTERY
PAC-12 Kit Contents. Tools Needed Soldering iron Phillips screwdriver Wire stripper Wrenches, 7/16 and 1/2 Terminal crimp tool Pliers Solder
PAC-2 Kit Contents Part Quantity Screws: 8/32 x 3/8 Screws: 8-32 x 5/6 Screw: 8-32 x /4 #8 internal tooth washers #8 solder lug ring terminals Bolt: Aluminum, /4-20 x.5 /4 internal tooth washer Nut: Aluminum
C&I Catalog C& I C atalog
C&I Catalog PUT YOUR MONEY ON OUR MARK While competitors are very vague with how they treat conformance language, the BURNDY Engineered System makes it very clear. Our dies, connectors and tools, when
THHN12STGN500 THHN 12 STR Green 500
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com Catalog Number Manufacturer Description Weight per unit Product Category Features Conductor
Tools & Supplies. Side-Cutting Pliers. Tongue & Groove Pliers. Cable Cutters. Long-Nose Pliers. Long Nose. Side-Cutting
Tools & Supplies Side-Cutting Pliers withstands toughest applications Cuts hardened wire, bolts and ACSR Laser-hardened blades and serrated jaws for long-term durability High-leverage design provides 40%
Tooling Table of Contents TABLE OF CONTENTS. Introduction
Table of Contents TABLE OF CONTENTS Introduction 7 Crimpers Battery Actuated PAT46LWSLI PAT46LWLI PAT750LI PAT750KLI PAT644LI PAT81KFTLI PAT4PC834LI PAT600LI PAT500SJ6LI Series PATMD6LI Series PATMD6LIWCJ
2. CONDUCTORS. 2.1 Strand Types. 2.2 Coatings Tensile Strength of Copper Wire Copper Strand Properties. 2.5 Aluminum Strand Properties
2. CONDUCTORS 2.1 Strand Types 2.1.1 Concentric Strand 7 2.1.2 Bunch Strand 7 2.1.3 Rope Strand 8 2.1.4 Sector Conductor 8 2.1.5 Segmental Conductor 8 2.1.6 Annular Conductor 8 2.1.7 Compact Strand 8 2.1.8
SDE Standard Die Envelope
Termination and Crimping Tools SDE Standard Die Envelope The Standard Die Envelope (SDE) is a new approach to crimp die interchangeability. This flexibility in die options provides the capability to crimp
Wire Gauge Chart. Cigar Lighter 10 to 12. Dome Light 1. Radio 2 to 4. Gauges 0.7 to 1. Instrument Lights 1.5 to 3
Wire Gauge Chart Amp Capacity Total Length of Wire in Circuit from Power Supply to Accessory 12 Volt 6 Volt 10-ft 20-ft 30-ft 40-ft 50-ft 60-ft 70-ft 80-ft 90-ft 100-ft 1.0 0.5 18 ga 18 ga 18 ga 18 ga
AMPOWER Terminals and Splices Catalog Revised 05-95
atalog 805 Product Facts Designed for large cables and leads Ideally suited for power generation and distribution Accepts a wide range of stranded copper wires (6 AWG to 000 MM [3-507 mm ] for terminals
02 WIRE AND CABLE WIRE AND CABLE FILS ET CÂBLES ALAMBRES Y CABLES. Primary Wire Dispenser
TECHNICAL INFORMATION INFORMATION TECHNIQUE INFORMACIÓN TÉCNICA WIRE/CABLE DISPLAYS PRÉSENTOIRS POUR FILS/CÂBLES EXHIBIDORES DE CABLES For all vehicle wiring maintenance and repairs, Grote offers a wide
St. Monica Food Pantry Low Voltage (600V and less) Conductors and Cables sys-tek No
St. Monica Food Pantry 26 0519-1 ELECTRICAL WORK DIVISION 26 SECTION 260519 LOW VOLTAGE (600V AND LESS) PART 1. GENERAL 1.1 WIRES (SINGLE CONDUCTOR) AND CABLES (MULTI-CONDUCTOR ASSEMBLIES) USED FOR THE
Journeyman TM Series. Series. Journeyman TM
Journeyman TM Series The Journeyman line of hand tools represents the best of Klein quality and workmanship combined with the latest innovations in handle design. 22 Side-Cutting Pliers Features: State-of-the-art
Descriptions RoHS Compatible; Applicable Standard ASTM B3, ASTM B8, ASTM B787, Federal Specification A-A-59544, NFPA 70, NEMA WC-70
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 THHN500BK500 THHN 500 STR Black 500 Southwire Company Catalog Number Manufacturer Description Weight per unit Product
HOOK-UP WIRE A STYLE TO SUIT ANY NEED
A STYLE TO SUIT ANY NEED Alpha s commitment to quality and service starts at the beginning... with the manufacturing of single conductor hook-up wire, the most basic wiring component. Used extensively
Waterpipe Ground Clamps. 1/2 in., 3/4 in., 1 or rebar /4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 AWG
Waterpipe Ground Ground Wire Size Water Pipe Size 2-T 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 WG 2-1/2 in., 3 in. or 3-1/2 in. 5-T 4 in., 4-1/2 in. or 5 in. 6 6
3M Scotchlok Copper/ Aluminum Compression Lugs, Series
Copper/ Aluminum Compression s, 40000 Series Data Sheet January 2014 Description Agency Approvals and Self Certifications Copper/Aluminum Compression s 40000 Series are made of high conductivity aluminum
AEE. Canada. Australia
DMARCA DE CONFORMIDA CORDS & ELECTRICAL UNIVERSAL POWER JUMPER CORD INTERNATIONAL AGENCIES APPROVED 302 POWER JUMPER CORD APPLICATIONS: To Connect Accessories and Peripherals to Computers and Electronic
TRANSMITTAL LETTER. As Builts Change Order Contract Copy of Letter Insurance. For approval Approved as submitted Resubmit copies for approval
Redwood City Electric, Inc. TRANSMITTAL LETTER To: Transworld Construction, Inc. 1178 Folsom Street San Francisco, CA 94103 Date: 05/31/12 Job #: 9340 Regarding: SFO DATA CENTER Attn: Rob Acero We are
DOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES
DOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES DOWNSTREAM FACILITY CABLES El Dorado, Arkansas Made in America CIR (Crush & Impact Resistant) CIR is a next-generation cable designed to replace older-technology
THHN6WH500 THHN 6 STR White 500. Features Conductor Size Current Rating 55 AMPERE (60 DEG C), 65 AMPERE (75 DEG C), 75 AMPERE (90 DEG C)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category THHN6WH500 THHN 6 STR White 500 Southwire Company
Airport Cables & Connectors
Airport Cables & Connectors Aircraft Cable & Connector Products Descrip on 0 Hz Single Jacket No Contact Sec on 0 Hz Single Jacket With Replaceable Durable Hard Nose Contact Sec on 0 Hz Single Jacket -
WIRE AND CABLE SECTION M WIRE AND CABLE. TEW / TEWN and TR-64 Wire. SPT1 / SPT2 / SEW1 AND SEW2 Wire. SVT / SJT / SO AND SOOW Cords
SECTION M TEW / TEWN and TR-64 Wire SPT / SPT2 / SEW AND SEW2 Wire SVT / SJT / SO AND SOOW Cords Clear Braided Multi Conductor Cable M2 M3 M4 M5 M2 TEW / TEWN AND TR-64 WIRE TEW and TEWN - Single Conductor
3 Heat Shrinkable Products
3 Heat Shrinkable Products Heat Shrink Tubing Selection Guide 102 Single-Wall Polyolefin Tubing 104 Adhesive-Lined Tubing 114 3M Heat Shrink products provide a uniquely effective means of applying skintight
Ideal. Ergonomic, Cushion-Grip, Vinyl Coated
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 353029 8" Dig Plier W/Ang Head Ideal Catalog Number 353029 Manufacturer Ideal Smart-Grip High-Leverage Diagonal-Cutting,
High Leverage Combination Pliers
Wiha Pliers & Cutters, professional quality at competitive prices. A wide selection covering most applications in which pliers & cutters are required. 64HRC Cutting Edges Wiha SoftGrip Pliers & Cutters
NSi INDUSTRIES, LLC 2010 ELECTRICAL CATALOG. Electrical Catalog
NSi INDUSTRIES, LLC 2010 ELECTRICAL Electrical Catalog 2010 About Us Serving the Commercial and Industrial sector since 1980, through a nationwide network of over 5,000 electrical distributors and recently
Copper Compression Lugs Conductor Size #8
A TYPE Conductor Size #8 Overall Catalog Wire Alt Bolt Overall Die Number Size Wire Size Size Thickness Color Code -8-10 8 AWG 8 FLEX #8-#10 0.579 0.445 0.071 1.201 RED 0.185 0.256-8-14 8 AWG 8 FLEX 1/4
onlinecomponents.com
Introducing T&B Marrette Wire Connectors In 1914, William Marr invented the world s first pressure type wire connector. Since then, Marrette connectors have become synonymous with best quality wire connector.
THHN2BK2500 THHN 2 STR Black 2500
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com Catalog Number Manufacturer Description Weight per unit Product Category Features Conductor
Success Depends on the Crimp
Success Depends on the Crimp Understanding the UL-486F Standard for Bare and Covered Ferrules Vince Barone, May 12, 2015 1 Agenda 2 What is a Ferrule? Ferrules are terminals that only have a barrel. They
FLEXIBLE POWER & GROUNDING. Braid Solutions
FLEXIBLE POWER & GROUNDING Braid Solutions Flexible Grounding and Power Options One of our signature products, BURNDY Braid Assemblies are an economical and efficient means of protecting electrical equipment
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
SIMpull THHN, it slips and slides - all with NoLube.
SOUTHWIRE S SIMpull THHN Southwire maintains its goal of revolutionizing the wire industry by providing its consumers with a product that is not only SIMpull but also requires NoLube. SIMpull THHN is a
A. Product Description: Stranded conductor insulated wire.
SECTION 16120CPPR CONDUCTORS AND CABLE PART 1 - GENERAL 1.1 SYSTEM DESCRIPTION A. Product Requirements: Provide products as follows: 1. All building wire shall be stranded copper (no aluminum wire). 2.
Ground Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
File E13288 Vol. 1 Sec. 24 Page 1 Issued: Vol. 22 Sec. 2 Revised: and Report
File E13288 Vol. 1 Sec. 24 Page 1 Issued: 1979-10-01 Vol. 22 Sec. 2 Revised: 2015-08-19 DESCRIPTION PRODUCT COVERED: USL - General use wire connectors, terminals, butt and parallel connectors. Catalog
INDUSTRIAL & COMMERCIAL TRANSPORTATION
INDUSTRIAL & COMMERCIAL TRANSPORTATION Terminals and Connectors Contents Tooling Overview... 182 Automated Tooling...182184 Hand Tools...185186 Removal Tools... 187 How To Instructions... 188190 Crimp
TED-300-OG- SMC ORDERING GUIDE FOR Single Wire & Multipair Connectors
TED-300-OG- SMC ORDERING GUIDE FOR Single Wire & Multipair Connectors Kunt Elektronik San. Tic. A.S Technical Support Atatürk Bulvarı NO: 216 34670 İkitelli - Istanbul Türkiye CONTENTS ISSUE AND AMENDMENT
SECTION MEDIUM-VOLTAGE CABLES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 05 13 MEDIUM-VOLTAGE CABLES SPEC WRITER NOTE: Delete between //-----// if not applicable to project. Also delete any other item or paragraph not applicable in
Configure-to-Order probes
CONFIGURE-TO-ORDER THERMISTOR PROBES Configure-to-Order probes from MEAS offer the flexibility of custom design at the price of standard parts. Match any MEAS interchangeable thermistor with cable and
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get