1.05 Y1MR (1) W5CRT (1) W5CRT (1) U5CRT (1) #6 AWG YA6CL6-BOX MY29-3 (1) X5CRT (1) X5CRT (1) UBCABT (1)

Size: px

Start display at page:

Download "1.05 Y1MR (1) W5CRT (1) W5CRT (1) U5CRT (1) #6 AWG YA6CL6-BOX MY29-3 (1) X5CRT (1) X5CRT (1) UBCABT (1)"

Brittany Crawford
6 years ago
Views:

1 URNDY ONE HOE HYUG CODE CONDUCTOR STANDARD ARRE (Continued) 90 T T T 45 Fig. 1 Fig. 2 Fig. 3 C-10 Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless MD6, OUR840, CT500HS, Y35, Y39, Y750, Color Die Strip Catalog Number Fig # AWG MM 2 Size Width () (T) () (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index ength YA6C4-OX YA6C / W5CVT (1) W5CVT (1) YA6C Y1MR (1) W5CRT (1) W5CRT (1) U5CRT (1) #6 AWG YA6C6-OX MY29-3 (1) X5CRT (1) X5CRT (1) UCAT (1) lue 7 7/8 YA6C / MY29-11 (1) X8CART (1) X8CART (1) YA6C MRC840 (1) YA5C-OX Y2MR (1) W5CRT (1) W5CRT (1) YA5C-45 2 #5 AWG 1/ W5CVT (1) X5CRT (1) U5CRT (1) lue 7 7/8 YA5C X5CRT (1) W5CVT (1) YA4C-OX YA4C / YA4C YA4C1-OX YA4C YA4C YA4C3-OX W4CVT (1) W4CVT (1) U4CRT (1) YA4C #4 AWG 5/ W4CRT (1) W4CRT (1) U6CAT (1) YA4C X4CRT (1) X4CRT (1) Gray 8 7/8 YA4C4-OX YA4C / YA4C YA4C6-OX Y1MR (2) YA4C / MY29-3 (1) YA4C MY29-11 (1) YA3C MRC840 (1) # 3 STR YA3C / Y2MR (2) # 2 SO YA3C Y644M (1) W3CRT (1) W3CRT (1) U3CRT (1) White 9 15/16 YA2C2-OX YA2C / YA2C YA2C-OX YA2C / W2CVT (1) W2CVT (1) YA2C W2CRT (1) W2CRT (1) U2CRT (1) rown 10 15/16 #2 AWG 35 YA2C4-OX X2CRT (1) X2CRT (1) YA2C / YA2C YA2C6-OX YA2C / YA2C YA1C YA1C / YA1C YA1C-OX Y1MR (2) YA1C / MY29-3 (1) W1CVT (1) W1CVT (1) YA1C U1CRT-1 (1) #1 AWG 50 MY29-11 (1) W1CRT-1 (1) W1CRT-1 (1) YA1C4-OX U4CAT (1) MRC840 (1) X1CRT-1 (1) X1CRT-1 (1) YA1C / Y644M (1) YA1C Green 11 15/16 YA1C6-OX YA1C / YA1C * Use PUADP-1 adapter with "U" dies in Y46 HYPRESS. ** P-RT die sets for use in Y46 HYPRESS only, PUADP-1 adapter not required. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. See tooling section of this catalog for complete tool and die For applications greater than 2000 Volts, consult cable manufacturer for voltage stress relief instructions.

URNDY INTRODUCTION MEDIUM AND ARGE HYDENT Copper and aluminum compression terminals and splices for terminating conductors from #8 AWG through 2000 kcmil.

2 URNDY INTRODUCTION MEDIUM AND ARGE HYDENT Copper and aluminum compression terminals and splices for terminating conductors from #8 AWG through 2000 kcmil. The medium and large HYDENT line is designed for terminating and splicing medium and large conductors in electrical power applications. C-1 HYUG UNINSUATED COMPRESSION TERMINAS U ISTED 90 C, 600 VOTS TO 35 kv URNDY's HYUG terminals, types YA, YA-TC, YA-, YA--TC, YA-2N, YA-2TC, YA-- TC-FX, YA--2TC, and YA-2N are designed for terminating copper conductors in a wide variety of electrical connections, including heavy-duty industrial, utility, commercial, and telecommunications applications. The HYUG terminals require simple cable preparation for an easily installed permanent and inspectable cable termination. The terminals are listed by U (U STD. 486A) and CSA certified to 600 volts, when applied with the proper tool and die combination. The terminals may be used in applications to 35KV. See each catalog page for U 35kV Features and enefits Manufactured from seamless high conductivity electrolytic copper tubing with heavy duty wall thickness. Provides maximum conductivity, low resistance and ductility for an excellent combination of electrical and crimp forming properties. arrel diameter closely matches commercial (code) cable and Navy cable diameters. Provides an excellent relationship of the conductor/connector combination to produce a high quality electrical connection with the recommended tooling. Electro-tin plated. Electro-lead plated. urndy s proprietary brite finish. Provides durable long-lasting corrosion resistance. Internally beveled barrel end. Provides easy cable insertion. Each connector is clearly marked with the wire size and type, die index, and color coding. Provides easy identification and proper tooling recommendation. Marked with the proper number and location of crimps. owers installed costs. Provides for proper installations. Proper compression systems forms a homogeneous mass. The result is an excellent electrical connection. Use up to 35 kv as indicated. Suitable for high voltage applications. Expanded wire ranges when using Y644 HYPRESS Dieless 1 Crimp. Provides ability to complete emergency repairs when connector and wire size do not match. Crimp areas clearly marked. Provides correct number and location of crimps for proper installation. Hydraulic and attery tooling crimp embossment. Provides permanent die index number embossment on completed crimp for inspection purposes.

3 URNDY ONE HOE YA-, YA--TC C-9 - C14 STD. ENGTH UGS NARROW TONGUE YA--NT C15 NARROW TONGUE TWO HOE YA--2NT C50 TWO HOE YA-2, YA-2N, YA--2TC C43 - C49 STRANDED CODE CASS CAE ONG ARRE UGS SPICES ONE HOE YA, YA-TC, YAZ C16 - C24 TWO HOE YA-2N, YA-2TC, YAZ C51 - C63 FOUR HOE YA-4N, YA-4N C85 STANDARD ENGTH YS- C93 ONG ARRE YS, YS-T, YSP-T C94, C98 C-3 REDUCER REDUCER Y-R C95 TEE YST, NYT C112 - C113 C-TAP YC-C C104 IGHT DUTY C TAP YC- C103 STD. ENGTH ARRE UGS ONE HOE YA-, YA--FX, YAV, YAV--FX C25 - C30 ONE HOE WIDE EED ENTRY YA- C31 ONE HOE EAD PATED YAG--TC-D C32 - C37 TWO HOE YA--2TC-FX, YAV--2TC-FX C64 - C70 TWO HOE-EAD PATED YAG--2TC-D C71 - C77 FEXIE EXTRA FEX Accepts Code and Flex Cables Up to 4/0 ONG ARRE-UG PIN SPICE ONE HOE YA-TC-FX, YAV-TC-FX, YAZV C38 - C42 TWO HOE YA-2TC-FX, YAV-2TC-FX, YAZV C78 - C83 PIN YEV-P-FX, YEP-FX, YEP C114 - C116 SPICE STANDARD ENGTH EED YS- C96 - C978 ONG ARRE EED YS-FX C99 C-TAP YCHC C105 H-TAP YH C106 - C108 ONG H TAP YSH C109 COVERS FOR H CF-FR C110 UGS ONE HOE YA-A, YA-A-TN C117 - C118 TWO HOE YA-A C119 TRANSFORM. UG KIT STACKING YA-A-KIT ASA-U, CUSA C120 C92 AUMINUM PIN STRAIGHT AYP C121 - C122 OFFSET AYPO C121 - C122 SPICES STANDARD YS-A C123 - C124 TAPERED FOR HIGH VOTAGE YS-AT C125 REDUCERS YR C126 H- YFD, YFN, YFO, YFR C127 COVERS FOR H CFA, CFA-FR C128

4 URNDY C-4 COMPRESSION CONNECTORS URNDY's compression connectors are designed for reliable and controllable electrical connections. The complete installation is fully inspectable. They are high conductivity copper and operate cooler than the wire on which they are installed. The connectors withstand a wide range of electrical and environmental conditions, including current surges, temperatures, corrosion and vibrations, for a wide variety of applications. These features mean a consistently high quality connection at a low installed cost. Copper compression connectors are manufactured from high-conductivity electrolytic copper. The connectors are normally tinplated, lead-plated, or plated with proprietary URNDY brite finish to provide durable long-lasting corrosion resistance. The connector design has been matched to the cable size to provide the necessary physical strength requirements for reliable electrical performance. Aluminum compression connectors are manufactured from high conductivity, high purity wrought aluminum. They are designed with sufficient mass and are electro-tin plated to minimize corrosion due to galvanic action between dissimilar metals. The connector barrels are pre-filled with PENETROX, URNDY's oxide inhibiting compound. PENETROX contains homogeneously suspended metallic particles which penetrate the wire's oxides to establish excellent continuity between the individual strands and the connector barrel for a low-resistance connection. PENETROX maintains an air-tight connection. Each barrel end is covered with a color-coded plastic dust cap which prevents foreign matter from entering the connector before it is used. The connector design has been engineered to match the cable size to provide the necessary physical strength requirements for reliable electrical performance. SEECTION AND USE Copper compression connectors are recommended for use on copper conductors. Aluminum compression connectors are recommended for use on aluminum conductors. Dual-rated aluminum compression connectors may be used on both copper and aluminum conductors. Two basic compression designs are available: Circumferential and indent. Circumferential compression is solid and symmetrical. No sharp "Flash". Indent compression. The connector is swaged to the conductor. After compression, virtually all the air is removed leaving a tight homogeneous mass of connector and conductor. The circumferential crimp design is recommended for color coded connectors in low and high voltage applications. Die index number embossment provides an easy inspection where required to verify the use of the proper connector/die combination. It is also recommended for insulated connectors and for terminating flexible and welding cables. The circumferential crimp design dies compress cable strands into polygonal shapes forming intimate contact with each other and the connector barrel. This compression forms a tight homogeneous mass with virtually no air pockets. The circumferential crimp provides an excellent electrical connection with high pull-out values. The circumferential crimp is ideal for high voltage applications leaving the connector barrel symmetrical, which is easier to insulate. The indent type crimp can be used in virtually any application except polyvinylchloride (PVC) insulated terminals and splices. It is an excellent means of terminating flexible, extra flexible and welding cables. The indentor compresses the cable strands to form intimate contact with each other and the connector barrel. The result is an excellent electrical connection with high pull-out strength. aboratory work testing curves established the proper depth and shape of indent for each type of connector and wire combination. TOOING Tooling systems are essential for proper installation of a compression connector. Since connectors and dies are designed as a unit for specific wire sizes, only the recommended tools and dies should be used. Most aluminum and copper HYUG terminals and HYINK splices are marked with a die index number and are color-coded to identify the correct installation die. Dies marked with the matching die index number and color can be used to install the connector. URNDY tooling installs a wide range of connectors, is reliable, cost effective, and precision engineered for durable, long-lasting service and quality connections. The tools include small plier types, full cycle ratchet designs and hydraulically-powered HYPRESS heads and new attery Actuated Tools. Some have permanent die grooves or adjustable dies, while others require a change of die sets or nest die for each connector size. URNDY's recommended tools achieve crimp performance consistent with U and other industry standards. Since several tools are suitable for most connectors, the most economical and practical tool can be chosen for each application. INDUSTRY STANDARDS URNDY's compression terminals, splices and tap connectors requiring third party testing and approval are listed by Underwriters' aboratories, Inc. Many have also received CSA approval and are approved under MI- T-7928 and other military standards. All conform to applicable sections of the National Electrical Code. URNDY also offers connectors and splices which meet the (OCA Seismec and Aging) requirements of IEEE standards 323, 383 and 344 for class 1E critical circuits for use in Nuclear Utility Applications. Certification to 10CFR50 and 10CFR21 available. Detail catalog listings should be consulted to obtain the appropriate standards for each connector and splice.

5 URNDY ONE HOE HYUG CODE CONDUCTOR STANDARD ARRE DIE AND COOR CODE INFORMATION INSPECTION WINDOW EVEED ENTRY TYPES YA-, YA--TC COMPRESSION TERMINA U isted 90 C, 600 Volts to 35 KV EECTRO-TIN PATED CRIMP CAE ACCOMMODATION C-9 90 T T T 45 Fig. 1 Fig. 2 Fig. 3 Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless MD6, OUR840, CT500HS, Y35, Y39, Y750, Color Die Strip Catalog Number Fig # AWG MM 2 Size Width () (T) () (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index ength YAV10-45-OX YAV10-OX #14-#10 YAV10R-OX STR YAV10R3-OX 3 6 1/ YAV10T2-OX 1 5/ #12-#10 YAV10T3-45-OX 2 1/ SO YAV10T3-OX 1 1/ Y8MR-1 (1) /16 YAV10T4-OX 1 3/ YA8C1-OX YA8C / YA8C YA8C2-OX YA8C #8 AWG 5/ Y1MR (1) YA8C Y8MR-1 (1) YA8C3-OX 1 #8 WED 1.51 W8CVT (1) W8CVT (1) Y2MR (1) YA8C / W8CRT (1) W8CRT (1) 10 MY29-3 (1) YA8C / X8CRT (1) X8CRT (1) MY29-11 (1) YA8C4-OX MRC840 (1) YA8C #6 SOID 1/ U8CRT (1) Red 49 7/16 YA8C YA8C-OX YA8C YA8C YA6C-OX YA6C / YA6C Y1MR (1) W5CVT (1) W5CVT (1) YA6C1-OX MY29-3 (1) W5CRT (1) W5CRT (1) YA6C #6 AWG MY29-11 (1) X5CRT (1) X5CRT (1) YA6C MRC840 (1) X8CART (1) X8CART (1) YA6C3-OX Y2MR (1) U5CRT (1) lue 7 7/8 YA6C / YA6C * Use PUADP-1 adapter with "U" dies in Y46 HYPRESS. ** P-RT die sets for use in Y46 HYPRESS only, PUADP-1 adapter not required. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. The MM 2 conductor size listed is for both Class 2 and Class 5 conductor. See tooling section of this catalog for complete tool and die For applications greater than 2000 Volts, consult cable manufacturer for voltage stress relief instructions.

W30VT (2) U30RT (2) 300 kcmil 150

W30VT (2) U30RT (2) 300 kcmil 150 URNDY ONE HOE HYUG CODE CONDUCTOR STANDARD ARRE (Continued) 90 T T T 45 Fig. 1 Fig. 2 Fig. 3 C-12 Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless