BNC Connectors (50 ohm/75 ohm)
|
|
- Britton Evans
- 6 years ago
- Views:
Transcription
1 BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors Full range of Hex Crimp and O Crimp Products for common coaxial cables. ow VSWR Single crimp connectors offer one crimping operation for fast application Twist-on connectors require no special tooling for application to the cable Field serviceable (Category A) connectors qualified to MI-C Field replaceable (Category C) plugs with captivated center contact Field replaceable plugs can be terminated with industry standard tooling Tarnish resistant Nickel finish available Choice of different dielectrics isted under the Component Program of Underwriters aboratories Inc., R File No. E81956 PC Board soldered connectors are recognized under the Component Program of Underwriters aboratories Inc., R File No. E81956 Certified by Canadian Standards R Association File No. R 7189 Between Series Adapters For BNC Between Series Adapters, see pages Related Product Data Product Specifications BNC Ohm Terminators BNC O Crimp Connectors BNC Hex Crimp BNC and Hex Crimp Connectors BNC Solder Jacks BNC Connectors (Category A) BNC PCB Panel-Mount Jacks The Tyco Electronics BNC RF connector family with bayonet locking coupling provides highly reliable, quick connect/disconnect coaxial connections. Exclusive single and O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. Available in both 50 and 75 ohm versions, these connectors feature numerous styles including cable plugs and jacks, adapters and printed circuit board connectors. In addition to a variety of crimp type terminations, connectors are furnished in field replaceable and twist-on styles. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MI-C specifications BNC T Adapter BNC 75 Ohm Connectors BNC Feed- Thru and Bulkhead Adapters BNC 50 Ohm Solder Jacks BNC PCB Press Fit Jacks Application Specifications BNC PCB Jack Press Fit Tyco Electronics can also supply low cost alternatives with an extensive commercial type product line. A lower cost consumer series product offers the capability to supply center contacts in strip form and allow for automated center contact crimp technology. All connectors are designed around the mil-specifications, but utilize low-cost materials, offering comparable mechanical and electrical performance. Performance Specifications Page 45 Material Specifications Page 46 Tooling Pages Military Category All MI type O crimp connectors are Category B Type (Tyco Electronics Crimp Tooling), unless otherwise noted. Packaging All MI Type connectors are packaged individually, all O crimp connectors are bulk packaged and all Hex crimp connectors are individually packaged unless otherwise noted. 44
2 BNC Connectors (50 ohm/75 ohm) Performance Specifications Characteristics Single Category B Straight Right-Angle PC Crimp O Crimp Solder Solder O Crimp O Crimp Board Solder (MI Type) (MI Type) Clamp Clamp & Hex Crimp & Hex Crimp 50 Ohms 75 Ohms 50 & 75 Ohms 50 Ohm Jacks Electrical Impedance, Nom. (Ohms) & & 75 Working Voltage (Volts RMS) Resistance Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 2.0 Inner: 2.0 Inner: 6/1.5 Inner: 2.75 (Milliohms) Outer: 0.3 Outer: 0.2 Outer:.20 Outer:.20 Outer: 1.0 Outer: 2.0 Outer: 3/0.2 Outer: 1.0 Initial Insulation Resistance (Megohms) Dielectric Withstanding Voltage (VAC) Corona evel at 70,000 ft. (Volts, RMS) RF eakage, (db) -55 at 2-3 GHz -55 at 2-3 GHz -55 at 2-3 GHz -55 at 2-3 GHz -55 at 1-2 GHz RF Insertion oss, (db) 0.2 at 3 GHz 0.2 at 3 GHz 0.3 at 3 GHz 0.2 at 3 GHz 0.15 at 2 GHz Frequency Range (GHz) and VSWR in Frequency Range Mechanical Force to Engage (lbs. [N])/couple, (in-lbs. [N-M]) max. 13.3/11.12 [3/2.5] 13.3/11.12 [3/2.5] 13.3/.028 [3/2.5] 13.3/.028 [3/2.5] 26.7/26.69 [6/6.0] 26.7/26.69 [6/6.0] Coupling Nut Retention, Min. N [lbs.] [100] [100] [100] [100] [60] [60] Cable Retention, N [lbs.] [60] (RG58C/U) [60] (RG58C/U) [40] (RG58C/U) [40] (RG58C/U) [60] (RG58C/U) [60] (RG58C/U) [60] (PCB Ret) Durability (Cycles) Jam Nut Mounting Torque, / [N m] (in. lbs.) [2.8] [2.8] [2.8] [2.8] [2.8] [2.8/1.4] [2.8] Environmental Temperature Range, Operating (C ) -65 to to to to to to to to to +165 Vibration MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-1344 MI-STD-202 MI-STD-202 MI-STD-202 Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204 Cond. B Cond. B Cond. B Cond. B Cond. III Cond. B Method 201A Cond. B MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-1344 MI-STD-202 MI-STD-202 MI-STD-202 Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213 Cond. G, 50 G s Cond. G, 50 G s Cond. G Cond. G Cond. G, 100 G s Cond. I, 100 G s Cond. I or A, 50 G s Cond. I, 100 G s Thermal Shock MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-1344 Method 107 Method 107 Method 107 Method 107 Method 1003 Cond. A MI-STD-202 Method 107 MI-STD-202 Method 107 MI-STD-202 Method 107 Moisture MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-1344 Resistance Method 106 Method 106 Method 106 Method 106 Method 1002 Type II MI-STD-202 Method 106 MI-STD-202 Method 106 MI-STD-202 Method 106 MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-202 MI-STD-1344 MI-STD-202 MI-STD-202 MI-STD-202 Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101 Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Product Specification Assembled to cable with polytetrafluorethylene dielectric. 2Assembled to cable with polyethylene dielectric. 3For Metal Threads 4For Polyester Threads 45
3 BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued) Connector Component Single Category Straight Right-Angle Crimp B & C Solder Solder O Crimp PCB PCB Solder (MI Type) O Crimp Clamp Clamp Hex Crimp & (MI Type) Terminators Solder Press Fit Ohm Jacks Adapters Connector Material Collar QQ-B-626 QQ-B-626 QQ-B-626 Zinc QQ-Z-363 QQ-B-626 Outer (Plug) QQ-B-626 Beryl. Copper Phos. Bronze QQ-B-750 MI-C QQ-B-626 Beryl. Copper QQ-C-530 QQ-C-530 Zinc Shell (Jack) QQ-B-626 QQ-B-626 Zinc QQ-Z-363 Zinc QQ-Z-363 Zinc QQ-Z-363 QQ-Z-363 QQ-B-626 QQ-B-626 PTFE Polyethylene PTFE PTFE Dielectric MI-P PTFE PTFE PTFE Polypropylene Polymethylpentene PTFE MI-P MI-P Polypropylene MI-P Polymethylpentene Gen. Purpose1 MI-P Polyester PBT Polypropylene, Gen. Purpose Gen. Purpose MI-P Gen. Purpose (Plug) QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626 Beryl. Copper QQ-C-530 Beryl. Copper Beryl. Copper Phos. Bronze Phos. Bronze ASTM-B-643 ASTM-B-643 Beryl. Copper Beryl. Copper Beryl. Copper Phos. Bronze Beryl. Copper QQ-B-570 QQ-B-570 (Jack) QQ-C-530 QQ-C-530 QQ-C-530 QQ-B-750 QQ-C-530 Beryl. Copper Beryl. Copper QQ-C-530 QQ-C-530 Gasket Silicon Rubber QQ-R-765 Silicon Rubber QQ-R-765 Silicon Rubber Silicon Rubber Silicon Rubber QQ-R-765 Silicon Rubber QQ-R-765 Ferrule Copper QQ-C-576 Copper QQ-C-576 Copper QQ-C-576 Connector Primary Finishes 2 Silver Silver Silver Collar QQ-S-365 Bright Nickel QQ-S-365 Bright Nickel Silver/ Bright Nickel Silver/ Bright Nickel Bright Nickel QQ-N-290 QQ-S-365 Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Silver Bright or Silver Outer s QQ-S-365 QQ-S-365 Silver/ Silver/ Matte Nickel Bright Nickel Bright Nickel Bright Nickel QQ-S-365 (Plug & Jack) Gold Bright Nickel Bright Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 Tin ead Tin ead Tin ead Silver s (Plug & Jack) MI-G Silver Gold MI-G Gold Gold ASTM-B-545 Silver, QQ-S-365 ASTM-B-545 Silver, QQ-S-365 Gold MI-B ASTM-B-545 Silver, QQ-S-365 QQ-S-365 Gold Gold, MI-G Gold, MI-G Gold, MI-G MI-G Silver Ferrule3 QQ-S-365 QQ-S-365 Tin ead Tin ead ASTM-B-545 ASTM-B-545 1Several pc board connectors have an outer polyester PBT insulator per MI-P If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 3Ferrules with tin-lead finish are used with nickel plated outer contacts. 46
4 Plugs, Crimp RF Coax Connectors BNC Connectors, 50 Ohm Single Crimp Hex and O Crimp [.572] [.572] Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Dim. Hand Tool Hand Tool Dies for Hand Cable Type Dielectric Style with or Tool Integral Die PRO-CRIMPER & 626 Pneu. Adapter Head , 178A, 178B, Single Crimp Silver PTFE MI Type , 196A Hex Crimp Nickel Polyethylene O Crimp Nickel Polyethylene , , 188A, 316 O Crimp Nickel PTFE MI Type Single Crimp Silver PTFE MI Type Hex Crimp Nickel Polyethylene , 179A, 179B, 161, O Crimp Nickel Polyethylene , 187A, BEDEN 9221 O Crimp Nickel PTFE MI Type Single Crimp Silver PTFE MI Type RD 316, 188, Double Braid O Crimp Nickel Polyethylene Hex Crimp Nickel Polyethylene BEDEN O Crimp Nickel Polyethylene BEDEN 9907, COMM/ O Crimp Nickel Polyethylene SCOPE O Crimp Nickel Polyethylene BEDEN O Crimp Nickel PTFE MI Type Order Tyco Electronics PRO-CRIMPER Coaxial O Crimp Hand Tool assembly , which includes dies Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly , which includes dies For use with BEDEN 9907 cable, COMM/SCOPE 3104 cable, and BEDEN 8219 cable only. 4For use with BEDEN cable, and COMM/SCOPE 2104 cable only. BEDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. 47
5 Plugs, Crimp (Continued) Single Crimp Hex and O Crimp [.572] [.572] Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Dim. Hand Tool Hand Tool Dies for Hand Cable Type Dielectric Style with or Tool Integral Die PRO-CRIMPER & 626 Pneu. Adapter Head Hex Crimp Nickel Polyethylene O Crimp Nickel Polyethylene , 58A, B, 58C O Crimp Nickel PTFE MI Type Single Crimp Silver PTFE MI Type BEDEN Hex Crimp Nickel Polyethylene , BERK-TEK BTDC-58, O Crimp Nickel Polyethylene COMM/ SCOPE 2135 O Crimp Nickel PTFE MI Type O Crimp Nickel Polyethylene , 55, 55A, O Crimp Nickel PTFE MI Type B Single Crimp Silver PTFE MI Type O Crimp Nickel Polyethylene , 142A, O Crimp Nickel PTFE MI Type B, Single Crimp Silver PTFE MI Type Consult Tyco Electronics for recommended crimp tooling. 1Order Tyco Electronics PRO-CRIMPER Coaxial O Crimp Hand Tool assembly , which includes dies Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly , which includes dies Bulk packaged. BEDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. 48
6 Plugs, Crimp (Continued) Single Crimp Hex and O Crimp [.572] [.572] Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Dim. Hand Tool Hand Tool Dies for Hand Cable Type Dielectric Style with or Tool Integral Die PRO-CRIMPER & 626 Pneu. Adapter Head Hex Crimp Nickel Polyethylene , 140, 210, O Crimp Nickel Polyethylene , 62A, 62B, 59, 59A, 59B, O Crimp Nickel Polyethylene BEDEN 9291, , 9269 O Crimp Nickel PTFE MI Type Single Crimp Silver PTFE MI Type , BEDEN 88241, 89269, Hex Crimp Nickel Polyethylene Hi-Temp 62A, Times P62, BERK-TEK, BTDC-59, O Crimp Nickel PTFE MI Type BTDC Hi-Temp 59, Times P59, O Crimp Nickel Polyethylene PF59 (20 AWG C.C.) BEDEN 9104, 9240, Hex Crimp Nickel Polyethylene , 9167, , 9266, Times O Crimp Nickel PTFE MI Type FM BEDEN 8281, 9141, 9231, Western Electric Single Crimp Silver Polypropylene MI Type , 728, , 8A, 213 O Crimp Silver PTFE MI Type , 11A O Crimp Silver PTFE MI Type BEDEN 9914, Times FM-8 O Crimp Silver PTFE MI Type Alpha 9847, BEDEN 8213, 9292 O Crimp Silver PTFE MI Type , 9A, 9B, 214 O Crimp Silver PTFE MI Type Order Tyco Electronics PRO-CRIMPER Coaxial O Crimp Hand Tool assembly , which includes dies Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly , which includes dies Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies BEDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. 49
7 Plugs, Twist-On Related Product Data Twist-On plugs must be used with cable that has a solid conductor. These plugs are not recommended for applications where the cable frequently moves or flexes [.572] Mating Twist-On Jack Page 52 RG/U Cable 59, 59A, 59B Gold Nickel [1.500] Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Dim. Hand Tool Hand Tool Dies for Hand Cable Type Dielectric Style with or Tool Integral Die PRO-CRIMPER & 626 Pneu. Adapter Head Hex Crimp Gold Nickel Polymethyl , 188, pentene A, 316 Single Crimp Gold Silver PTFE MI Type , 179A, 179B, 161, Hex Crimp Gold Nickel Polymethyl- 187, 187A, pentene BEDEN , 180A, 180B, 195, 195A Hex Crimp Gold Nickel Polymethylpentene BEDEN 9907, 89907, 8219, COMM/SCOPE Hex Crimp Gold Nickel Polymethylpentene , 3104 Hex Crimp Gold Nickel Polymethylpentene , 58A, 58B, 58C O Crimp Gold Nickel PTFE MI Type Single Crimp Gold Silver PTFE MI Type O Crimp Gold Nickel PTFE MI Type , 55A, B, 223 Single Crimp Gold Silver PTFE MI Type , 142A, 142B, 400 Single Crimp Gold Silver PTFE MI Type , 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel PTFE MI Type BEDEN 9291, , 9269 Dielectric Style Polymethylpentene Right-Angle Plugs, Crimp Single Crimp Hex and O Crimp [1.046] [1.046] [.572] [.572] BEDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. 50
8 Jacks, Crimp Single Crimp Hex and O Crimp 11.1 [.437] [.436] Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Dim. Hand Tool Hand Tool Dies for Hand Cable Type Dielectric Style with or Tool Integral Die PRO-CRIMPER & 626 Pneu. Adapter Head Hex Crimp Gold Nickel Polymethylpentene O Crimp Gold Nickel Polypro , 188, pylene A, 316 O Crimp Gold Nickel PTFE MI Type Single Crimp Gold Silver PTFE MI Type , 179A, 179B, 161, 187, 187A, Hex Crimp Gold Nickel Polymethylpentene BEDEN 9221 O Crimp Gold Nickel Polypro , 58A, pylene B, 58C O Crimp Gold Nickel PTFE MI Type , 55, 55A, 55B Single Crimp Gold Silver PTFE MI Type , 140, 210, O Crimp Gold Nickel Polypro , 62A, 62B, pylene , 59A, 59B, BEDEN 9291, O Crimp Gold Nickel PTFE MI Type , Order Tyco Electronics PRO-CRIMPER Coaxial O Crimp Hand Tool assembly , which includes dies BEDEN is a trademark of Belden Wire and Cable Company. 51
9 Jacks, Twist-On Related Product Data Twist-on jacks must be used with cable that has a solid conductor. These jacks are not recommended for applications where the cable frequently moves or flexes. Mating Twist-On Plug Page [1.580] RG/U Cable Dielectric Style 59, 59A, 59B Gold Nickel Acetal Panel Jacks, Crimp 12.7 ±0.1 [.500 ±.004] 11.2 [.441] [.702] [1.140] 12.7 ±0.1 [.500 ±.004] 2.77 [.109] Recommended Panel Cutout Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Hand Tool Hand Tool Dies for Hand Cable Type Dielectric Style with or Tool Integral Die PRO-CRIMPER & 626 Pneu. Adapter Head , 188, 188A, 316 O Crimp Gold Nickel PTFE MI Type , 58A, 58B, 58C O Crimp Gold Nickel PTFE MI Type , 140, 210, 62, 62A, 62B, 59, 59A, 59B, BEDEN 9291, O Crimp Gold Nickel PTFE MI Type , 9269, BEDEN is a trademark of Belden Wire and Cable Company. 52
10 Bulkhead Jacks, Crimp Single Crimp Hex and O Crimp Note: Panel Insulating Bushings Page 54 H H Recommended Panel Cutouts Maximum Panel Thickness 3.18 [.125] [.505] Min [.435] Min [ ] H = 11/16" across flats, [.800] across points [ ] Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Dim. Hand Tool Hand Tool Dies for Hand Cable Type Dielectric Style with or Tool Integral Die PRO-CRIMPER & 626 Pneu. Adapter Head Hex Crimp Gold Nickel Polymethylpentene O Crimp Gold Nickel Polypro , 188, pylene A, 316 O Crimp Gold Nickel PTFE MI Type Single Crimp Gold Silver PTFE MI Type , 179A, O Crimp Gold Nickel PTFE MI Type B, 161, , 187A, Single Crimp Gold Silver PTFE MI Type BEDEN Times RD316 O Crimp Gold Nickel PTFE MI Type BEDEN is a trademark of Belden Wire and Cable Company. 53
11 Bulkhead Jacks, Crimp (Continued) Single Crimp Hex and O Crimp Note: Panel Insulating Bushings at the bottom of this page H H Recommended Panel Cutouts Maximum Panel Thickness 3.18 [.125] [.505] Min [.435] Min [ ] H = 11/16" across flats, [.800] across points [ ] Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Dim. Hand Tool Hand Tool Dies for Hand Cable Type Dielectric Style with or Tool Integral Die PRO-CRIMPER & 626 Pneu. Adapter Head , 58A, 58B, 58C, BEDEN 88240, BERK-TEK Hex Crimp Gold Nickel Polymethylpentene BTDC-58, COMM/SCOPE 2135 O Crimp Gold Nickel Polypropylene , 58A, 58B, 58C O Crimp Gold Nickel PTFE MI Type Single Crimp Gold Silver PTFE MI Type , 55, 55A, 55B O Crimp Gold Nickel PTFE MI Type , 142A, 142B, 400 O Crimp Gold Nickel PTFE MI Type , 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polypro BEDEN 9291, pylene , Order Tyco Electronics PRO-CRIMPER Coaxial O Crimp Hand Tool assembly , which includes dies Panel Insulating Bushings for Bulkhead Jacks Material Nylon 0.89 [.035] 0.81 [.032] [.509] 5.46 [.215] [.549] 14.73±0.13 [.580±.005] Note: Can not be used with single crimp bulkhead jacks. 14.1±0.08 [.555±.003] BEDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc [.687] [.574] (2 Required) Recommended Panel Cutout 54
12 Plugs, for JIS Cables, Crimp Nickel Gold [.572] Interchangeable Dies for PRO-CRIMPER JIS Cable Termination Type Dielectric Dim. Hand Tool or PRO-CRIMPER Adapter D-2V Hex Crimp Polyethylene Bulkhead Solder Jacks, Front Mount Without Solder Terminal With Solder Terminal Nickel [.875] 9.65/9.75 [.380/.384] 3/8" - 32 Thread Accepts 1.5 [.059] Wire Accepts 1.5 [.059] Wire 3/8" - 32 Thread.396/4.04 [.156/.159] Recommended Panel Cutout W W VAOX is a trademark of General Electric Company. Material Silver Gold Tin Dielectric VAOX VAOX PTFE VAOX **Includes lockwasher and jam nut. **Includes solder terminal and jam nut. Dimensions Panel Insulating W Thickness Bushing Without Solder With Solder Terminal* Terminal** or or or or or or or
13 Insulating Bushings 0.94 [.030] 1.09 [.043] [.450] 4.04 [.159] [.430] 0.81 [.032] 1.78 [.070] 12.7 [.500] 3.94 [.155] [.470] [.585] 9.53 [.375] ±0.08 [.455 ±.003] [.625] 9.53 [.375] ±0.08 [.505 ±.003] ±0.06 [.432 ±.003] 12.07±0.08 [.475 ±.003] Recommended Panel Cutout Recommended Panel Cutout Isolated Bulkhead Solder Jacks, Front Mount Nickel Dielectric White VAOX 3/8" - 24 Thread Accepts 1.5 [.059] DIa. Wire [ ] Flange & Thread Material Part No. Tin VAOX Silver VAOX Gold VAOX [.515] [1.250] 3/8" - 24 Thread Panel Thickness [ ] Recommended Panel Cutout [ ] Nickel Silver Dielectric Black VAOX Flange & Thread Material Black VAOX [.505] [1.055] [ ] [ ] Panel Thickness [ ] Recommended Panel Cutout Sealed Bulkhead Solder Jack, Rear Mount Nickel Gold Dielectric Polymethylpentene This connector is designed to prevent moisture from entering the interface from the rear of the connector. 1/2" - 28 Thread Rubber Gasket [1.250] [.700] Accepts. 1.5 [.059] DIa. Wire [ ] [ ] Maximum Panel Thickness 6.35 [.250] 56 VAOX is a trademark of General Electric Company Recommended Panel Cutout
14 Right-Angle Jacks PC Board/Panel Mount Nickel Dielectric Polymethylpentene VAOX 1/2-28 Thread C Mtg. Hgt. Metal 1/2-28 Thread C Mtg. Hgt. C A B [1.375] C A B [1.375] Mounting Post Style Compliant Post [ ] E [ ] Dimensions Material Without With With A B C Mounting Posts Mounting Posts Compliant Posts Tin VAOX, White Gold Gold Tin Gold VAOX, Black Gold Gold Tin Metal Gold Gold Gold High Temp. Housing Gold : Gold [ ] thick Gold [ ] thick Note: If an Insulating Bushing is required see part number and Panel Cutout on page 54. Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout ockwasher and Jam Nut Without Mounting Posts With Mounting Posts ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] ±0.08 [.400 ±.003] G S 0.89 ±0.08 [.035 ±.003] (Top View) 5.08 ±0.05 [.200 ±.002] 2.64 [.104] Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) Mating Face 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] ±0.08 [.400 ±.003] (Top View) 2.01 ±0.05 [.079 ±.002] (2 Holes) 5.08 ±0.05 [.200 ±.002] Mating Face G S 0.89 ±0.08 [.035 ±.003] Recommended PC Board ayouts VAOX is a trademark of General Electric Company. 57
15 Vertical Jacks PC Board/Panel Mount VAOX Metal Nickel Dielectric Polymethylpentene 1/2-28 Thread [.625] 1/2-28 Thread [.625] [ ] B [1.375] Mtg. Hgt. B [1.375] Mtg. Hgt [ ] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout ockwasher and Jam Nut Dim. Dim. Without With Material B Mounting Mounting Posts Posts Tin VAOX, White Gold Tin VAOX, Black Gold Metal Tin Gold Note: If an Insulating Bushing is required see part number and Panel Cutout on page Without Mounting Posts 5.08 ±0.05 [.200 ±.002] 2.64 [.104] Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) With Mounting Posts 5.08 ±0.05 [.200 ±.002] 2.01 ±0.08 [.079 ±.003] (2 Holes) ±0.08 [.400 ±.003] G S ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] ±0.08 [.400 ±.003] G S ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] (Top View) (Top View) Recommended PC Board ayouts * Screw for board thickness of 2.38 [.093] or greater Screw for thickness of less than 2.38 [.093] VAOX is a trademark of General Electric Company.
16 Jacks with Mounting Flanges PC Board/Panel Mount 1/2-28 Thread [.625] Mounting Height [ ] [ ] Maximum Panel Thickness 6.1 [.240] C 8.59 [.338] [.835] [1.375] Recommended Panel Cutout Material VAOX, Tin White Gold ockwasher and Jam Nut [.130] Clearance Hole for 5-40 Screw ±0.08 [.900 ±.003] 8.89 [.350] 0.89 ±0.08 [.035 ±.003] G S (Top View) 2.54 [.100] [.450] Mating Face Recommended PC Board ayout VAOX is a trademark of General Electric Company. 59
17 Vertical Metalized Jacks PC Board Mount Recommended PC Board ayouts Style A Sq. [.687] [.625] Drill Holes for 0.94 ±0.05 [.037 ±.002] Pin (5 Places) 12.7 ±0.08 [.500 ±.003] 6.35 ±0.05 [.250 ±.002] 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] Dielectric Style eg ength Silver VAOX A Gold VAOX A Nickel Tin VAOX A Gold VAOX A Silver VAOX C Gold VAOX E Gold PTFE B Tin-ead Silver VAOX C Gold VAOX D Style B 6.88 ±0.08 [.271 ±.003] 1With.76 [.030] standoffs on top of legs ± ±0.08 [.059 ±.003] [.135 ±.003] (4 Holes) [.810] 1.02 ±0.08 [.040 ±.003] 3.43 ±0.08 [.135 ±.003] 6.88 ±0.08 [.271 ±.003] Style C 6.88 ±0.05 [.271 ±.003] 3.43 ±0.05 [.135 ±.002] 2.44 ±0.08 [.096 ±.003] (4 Holes) Style D 4.32 [.170] 1.07 ±0.05 [.042 ±.002] 6.88 ±0.05 [.271 ±.003] 1.32 ±0.08 [.052 ±.003] 6.48 [.255] 1.73 ±0.05 [.068 ±.002] [.655] [.625] 3.73 [.147] 7.47 [.294] Style E (Panel Mount) [ ] Drill Hole to Receive [.037±.002] Pin, 5 Required [.500 ±.003] 6.35 ±0.06 [.250 ±.002] 60 VAOX is a trademark of General Electric Company [.500 ±.003]
18 Vertical Metalized Jacks, PC Board Mount [.945] 7.50 ± 0.08 [.295 ±.003] 1.00 ± 0.08 [.039 ±.003] 2 Plcs. Signal Hole Switching Hole 1.70 ± 0.10 [.067 ±.004] ± 0.25 [.422 ±.010] 2.50 ± 0.08 [.098 ±.003] 4 Plcs ± 0.08 [.421 ±.003] 3.00 ± 0.10 [.118 ±.004] 1.50 ± 0.08 [.059 ±.003] 2 Plcs (Switching) Recommended PC Board ayout [.945] 3.75 ± 0.08 [.148 ±.003] 1.00 ± 0.08 [.039 ±.003] 2.50 ± 0.08 [.098 ±.003] 3 Plcs ± 0.10 [.067 ±.004] ± 0.25 [.422 ±.010] ± 0.08 [.421 ±.003] 3.00 ± 0.10 [.118 ±.004] 1.50 ± 0.08 [.059 ±.003] 2 Plcs Recommended PC Board ayout Dielectric Part No. Tin Silver Polyphenylene Tin Silver Polyphenylene Press Fit Vertical Metalized Jack, PC Board Mount [.470] 6.88 ±0.05 [.271 ±.002] 3.43 ±0.05 [.135 ±.002] 6.88 ±0.05 [.271 ±.002] [.059 ] Holes 1.02 ±0.08 [.040 ±.003] Insulating Bushing Material Polypropylene Only to be used on Part Nos & [.575] [.470] [.810] Recommended PC Board ayout PC Board Thickness Not ess Than 0.99 [.093] 2.96 [.115] 6.61 [.260] 61
19 Right-Angle Metalized Jacks, PC Board Mount C 6.15 [.242] ± 0.51 [1.088 ±.020] [.432] Mounting Height 6.6 ± 0.08 [.260 ±.003] 3.3 ± 0.08 [.130 ±.003] 6.6 ± 0.08 [.260 ±.003] 2.11 ± 0.08 [.083 ±.003] (4 holes) 1.17 ± 0.08 [.046 ±.003] Dielectric ength Part No. Nickel Polymethylpentene * Tin PTFE * Nickel Polymethylpentene * Maximum PC Board Thickness 2.54 [.100] Recommended PC Board ayout 3.81 ±0.08 [.150 ±.003] 1.19 ±0.18 [.047 ±.007] 8.64 [.340] 7.62 ±0.08 [.300 ±.003] Dielectric Part No. Nickel TPX Gold [.860] [1.000] 7.62 ±0.08 [.300 ±.003] 1.78 ±0.08 [.070 ±.003] 2 Holes Recommended PC Board ayouts Right-Angle Metalized Jacks, PC Board/Panel Mount 6.15 ± 0.25 [.242 ±.010] [.459] ± 0.51 [1.088 ±.020] ± 0.18 [.432 ±.007] 6.6 ± 0.08 [.260 ±.003] 3.3 ± 0.08 [.130 ±.003] [ ] 6.6 ± 0.08 [.260 ±.003] 2.11 ± 0.08 [.083 ±.003] 4 holes 1.17 ± 0.08 [.046 ±.003] Dielectric Part No. Tin PTFE Tin TPX /2-28 Thread 4.34 [.171] ockwasher and Jam Nut see page [ ] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 62 TPX is a trademark of Mitsui Chemicals America, Inc.
20 Tee Adapters Style A (Jack-Plug-Jack) Style B With Insulated Cover (Jack-Plug-Jack) Style C (Jack-Jack-Jack) D Insulation Material Polyphenylene oxide D D F E E E F Dimensions Comparable Packaging Style Material Material Dielectric UG/U No. and and D E F Connector Per Pkg., Nickel BE CU, Gold (30)2 PTFE A Bulk (100) PH BR, Gold (15)2 Acetal Bulk (100) A BE CU, Gold Acetal Bulk Zinc, (30) (100) Nickel PH BR, Gold Individual Acetal (15) (1) BE CU, Silver (200)2 Acetal Individual (1) B Zinc, Nickel BE CU, Gold (30)2 Acetal Bulk (100) C, BE CU, Silver PTFE Bulk Nickel (200) (100) Zinc, PH BR, Gold Bulk Nickel Acetal (50) (100) Gray insulation cover 2 (Microinches min thickness) 3 (Special graphics) Tee Adapter Covers Material Polypropylene, general purpose ± 0.76 [4.510 ±.030] Color Black Ivory Part No [.595] 5.08 [.200] 63
21 Jack-Jack Adapters Style A [1.281] Style B [1.410] Dielectric Style Nickel Silver PTFE A Nickel Gold PTFE A Nickel Gold Polymethylpentene B Bulkhead Jack-Jack Adapters [ ] [ ] H Recommended Panel Cutout H= 11/16 across flats, [.800] across points. Isolated Bulkhead Jack-Jack Adapter Nickel Nickel Nickel Dimensions H Dielectric Silver PTFE Gold Polyethylene Gold Polyethylene : Gold [ ] thick Gold [ ] thick Note: If an Insulating Bushing is required see part number and Panel Cutout on page [ ] Dielectric Nickel Gold Polymethylpentene [.625] [1.420] [ ] Recommended Panel Cutout H= 11/16 across flats, [.800] across points. Plug-Plug Adapter 31.8 [1.252] Ref. Gold Nickel Right-Angle Adapters (Jack-Plug) Dia [.572] Dielectric Nickel Silver PTFE Nickel Gold PTFE Nickel Gold Polymethylpentene [.901] [1.062] 64
22 Terminator Plugs 50, 75, 93 Ohm Nickel Gold Dielectric Polyethylene [.572] [1.300] Tether Resistor Specification With Tether Without Tether 1 Watt, 50 Ohm Watt, 75 Ohm Watt, 93 Ohm Watt, 75 Ohm 1 Watt, 50 Ohm Tether is conductive with #4 stud size #6 Stud Size Insulated Terminators ong Cover Insulation Material Polyphenylene oxide [1.500] [1.500] [.685] [.685] Short Cover* Register Color Cover Part Specification Style No. ong Gray 1 Watt, 50 Ohm Short Black ong * The Short Cover is required when mating the Terminator with a Tee Adapter. Jack Covers Silver Nickel [.870] [.572] Shorting Caps Nickel Gold [.600] [4.000] #6 Stud Size [.572]
23 BNC Connectors, 75 Ohm Plugs, Crimp Hex and O Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling listed below is different from the equivalent 50 ohm connectors [.572] Plugs Interchangeable Dies for Interchangeable RG/U Termination Dim. PRO-CRIMPER Dies for Hand Cable Type Dielectric Style Hand Tool Tool or & 626 Pneu. PRO-CRIMPER Head Adapter , 179A, Hex Crimp Gold Nickel Polyethelene B, 187, A, 161, O Crimp Gold Nickel Polyethelene BEDEN AT&T 735A Hex Crimp Gold Nickel Polyethelene O Crimp Gold Nickel Polyethelene BEDEN 8218 Hex Crimp Gold Nickel Polyethelene O Crimp Gold Nickel Polyethelene , 210, 62, 62A, Hex Crimp Gold Nickel Polyethelene B, 59, 59A, 59B, BEDEN 9291, O Crimp Gold Nickel Polyethelene , , BEDEN 89269, 88241, Hi-Temp 62A, Times P-62, Berk Tek Hex Crimp Gold Nickel Polyethelene BTDC-59, BTDC-62 BEDEN 8212, 9104, , 9167, 9240, 9259, Hex Crimp Gold Nickel Polyethelene , Times FM-59, (RG 59 Type O Crimp Gold Nickel Polyethelene with 20 AWG C.C.) Hex Crimp Gold Nickel Polyethelene BEDEN 9145, AT&T 734A O Crimp Gold Nickel Polyethelene BEDEN 9248, 9114 O Crimp Gold Nickel Polyethelene , 6A O Crimp Gold Nickel Polyethelene BEDEN 8281, , 9231, Hex Crimp Gold Nickel Polyethelene Western Electric 724, O Crimp Gold Nickel Polyethelene , COMM/SCOPE O Crimp Gold Nickel Polyethelene S59 Hec COMM/SCOPE F59 Hec-z O Crimp Gold Nickel Polyethelene AT&T is a trademark of AT&T Corporation. BEDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc.
24 BNC Connectors, 75 Ohm (Continued) Plugs for JIS Cables, Crimp Nickel Gold [.572] Interchangeable Dies for PRO-CRIMPER JIS Cable Termination Type Dielectric Dim. Hand Tool or PRO-CRIMPER Adapter C-2V Hex Crimp Polymethylpentene C-2V Hex Crimp Polymethylpentene Bulkhead Jacks for JIS Cables, Crimp Nickel Gold Dielectric Polymethylpentene [.800] Interchangeable Dies for PRO-CRIMPER JIS Cable Termination Type Dielectric Dim. Hand Tool or PRO-CRIMPER Adapter C-2V Hex Crimp 75Ω * *Packaged in 100 pieces per bag. 67
25 BNC Connectors, 75 Ohm (Continued) Right-Angle Plugs, Crimp Hex and O Crimp [1.070] [.572] Interchangeable Dies for Interchangeable RG/U Termination Dim. PRO-CRIMPER Dies for Hand Cable Type Dielectric Style Hand Tool Tool or & 626 Pneu. PRO-CRIMPER Head Adapter , 179A, 179B, 187, 187A, 161 Hex Crimp Gold Nickel Polymethylpentene BEDEN 9221 AT&T 735A Hex Crimp Gold Nickel Polymethylpentene AT&T KS , RD179 Hex Crimp Gold Nickel Polymethylpentene Double Braid 140, 210, 62, Hex Crimp Gold Nickel Polymethyl- 62A, 62B, 59, pentene A, 59B, BEDEN 9291, O Crimp Gold Nickel Polymethyl , 9269 pentene BEDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59, Hex Crimp Gold Nickel Polymethylpentene (RG 59 Type with 20 AWG C.C.) BEDEN 9145, AT&T 734A O Crimp Gold Nickel Polymethylpentene AT&T is a trademark of AT&T Corporation. BEDEN is a trademark of Belden Wire and Cable Company. 68
26 BNC Connectors, 75 Ohm (Continued) Jacks, Crimp Hex and O Crimp [.436] Interchangeable Dies for Interchangeable RG/U Termination Dim. PRO-CRIMPER Dies for Hand Cable Type Dielectric Style Hand Tool Tool or & 626 Pneu. PRO-CRIMPER Head Adapter , 179A, Hex Crimp Gold Nickel Polyethelene B, 161, , 187A, O Crimp Gold Nickel Polyethelene BEDEN BEDEN 8218 Hex Crimp Gold Nickel Polyethelene 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polyethelene BEDEN 9291, 9209, , BEDEN 88241, 89269, Hi-Temp 62A, Times P-62, Berk Hex Crimp Gold Nickel Polyethelene Tek BTDC-59, BTDC-62 BEDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59, Hex Crimp Gold Nickel Polyethelene (RG 59 Type with 20 AWG C.C.) BEDEN 9248, 9114 O Crimp Gold Nickel Polyethelene BEDEN is a trademark of Belden Wire and Cable Company. 69
27 Bulkhead Jacks, Crimp BNC Connectors, 75 Ohm (Continued) Hex and O Crimp [ ] [.800] [1.375] [ ] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Interchangeable Dies for Interchangeable RG/U Termination Dim. PRO-CRIMPER Dies for Hand Cable Type Dielectric Style Hand Tool Tool or & 626 Pneu. PRO-CRIMPER Head Adapter , 179A, Hex Crimp Gold Nickel Polyethelene B, 161, , 187A, O Crimp Gold Nickel Polyethelene BEDEN AT&T KS , RD179 Hex Crimp Gold Nickel Polyethelene Double Braid BEDEN 8218 Hex Crimp Gold Nickel Polyethelene , 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polyethelene BEDEN 9291, , 9269 BEDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59 O Crimp Gold Nickel Polyethelene (RG 59 Type with 20 AWG C.C.) BEDEN 9114, 9248 O Crimp Gold Nickel Polyethelene AT&T is a trademark of AT&T Corporation. BEDEN is a trademark of Belden Wire and Cable Company. 70
28 BNC Connectors, 75 Ohm (Continued) Bulkhead Solder Jacks Front Mount Nickel Silver [1.083] Accepts.054 Wire [1.083] Accepts.054 Wire 9.75/9.65 [.384./380] [.515] 3/8-32 Thread [.515] 3/8-32 Thread /3.96 [.159/.156] (without Solder Terminal) (with Solder Terminal) Maximum Panel Thickness 3.18 [.125] Recommended Panel Cutout Note: If insulating bushing required use part no or (for details, reference page 55). Note: If insulating bushing required use part no or (for details, reference page 55). Bulkhead Jack PC Board Mount 3.30 [.130] [.436] Ø ± 0.1 [.500 ±.004] 20.8 [.820] 11.2 ± 0.1 [.441 ±.004] Bulkhead Solder Jack Rear Mount ockwasher and Jam Nut see page 73. 1/2-28 Thread Accepts..050 WIre [.700] [ ] Nickel Gold Dielectric Polymethylpentene [1.250] [ ] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 71
29 Right-Angle Jacks PC Board/Panel Mount Outer Shell Nickel Dielectric Polymethylpentene ockwasher and Jam Nut see page 73. BNC Connectors, 75 Ohm (Continued) VAOX Metal 1/2-28 Threads 1/2-28 Threads C Mtg. Hgt. C Mtg. Hgt. C A B [1.375] C A B [1.375] Recommended PC Board ayouts Without Mounting Posts 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] ±0.08 [.400 ±.003] G S 0.89 ±0.08 [.035 ±.003] (Top View) With Mounting Posts 5.08 ±0.05 [.200 ±.002] [ ] 2.54 ±0.05 [.100 ±.002] ±0.08 [.400 ±.003] (Top View) [ ] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout 5.08 ±0.05 [.200 ±.002] * Screw for panel thickness of 2.38 [3/32] or greater * * Screw for panel thickness of less than 2.38 [3/32] * [.104] Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) Mating Face 2.01 ±0.08 [.079 ±.003] (2 Holes) 5.08 ±0.05 [.200 ±.002] Mating Face G S 0.89 ±0.08 [.035 ±.003] Dimensions Material Without With A B C Mounting Posts Mounting Posts VAOX, Black w/ * Compliant Posts Gold (Economy)* VAOX, * Black Gold (Economy)* VAOX, White Gold VAOX, * White Gold (Economy)* VAOX, Black Gold Gold VAOX, Black (Economy)* Gold VAOX, White Gold Metal Gold Metal Gold Metal (Economy)* Gold Metal with Gold Compliant Posts Tin (Economy)* Metal Gold Metal Gold Metal Gold Metal (Economy)* Gold **Economy connector uses 50 Ω part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). : Gold [ ] thick Gold [ ] thick Note: If an Insulating Bushing is required see part number and Panel Cutout on page VAOX is a trademark of General Electric Company.
30 BNC Connectors, 75 Ohm (Continued) Vertical Jacks PC Board/Panel Mount VAOX Metal Outer Shell Nickel Dielectric Polymethylpentene 1/2-28 Thread [.625] 1/2-28 Thread [.625] B [1.375] Mtg. Hgt. B [1.375] Mtg. Hgt [ ] [ ] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout ockwasher and Jam Nut Material Dim. B Dim. VAOX, Black Gold (Economy)* VAOX, White Gold (Economy)* Metal Gold Metal (Economy)* Tin *Economy connector uses 50 Ω part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). : Gold [ ] thick Note: If an Insulating Bushing is required see part number and Panel Cutout on page ±0.05 [.200 ±.002] 2.01 ±0.08 [.079 ±.003] (2 Holes) * Screw for panel thickness of 2.38 [3/32] or greater * * Screw for panel thickness of less than 2.38 [3/32] * ±0.08 [.400 ±.003] G S ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] (Top View) Recommended PC Board ayout VAOX is a trademark of General Electric Company. 73
31 Vertical Metalized Jacks PC Board Mount BNC Connectors, 75 Ohm (Continued) Style A Style B Style C Dielectric PTFE Sq. [.687] [.625] [.810] [.655] 12.7 ±0.08 [.500 ±.003] 6.35 ±0.05 [.250 ±.002] 1.50 ±0.08 [.059 ±.003] (4 Holes) 6.88 ±0.08 [.271 ±.003] 3.44 ±0.08 [.135 ±.003] 6.88 ±0.05 [.271 ±.003] 3.43 ±0.05 [.135 ±.002] 2.44 ±0.08 [.096 ±.003] (4 Holes) 12.7 ±0.08 [.500 ±.003] 6.88 ±0.08 [.271 ±.003] 6.88 ±0.05 [.271 ±.003] 1.32 ±0.08 [.052 ±.003] Drill Holes for 0.94 ±0.05 [.037 ±.002 ] Pin (5 Places) 6.35 ±0.05 [.250 ±.002] 1.02 ±0.08 [.040 ±.003] 3.43 ±0.08 [.135 ±.003] Recommended PC Board ayout Style F (Push-On) Plcs. [.100] [.580] ± [.1015 ±.0030] 5.16 ± 0.08 [.203 ±.003] 2.06 ± 0.05 [.081 ±.002] 4 Plcs ± 0.08 [.203 ±.003] 1.02 ± 0.08 [.040 ±.003] eg Style ength Nickel Gold B Tin Gold B Tin Gold B Tin Gold C Nickel Silver A Tin Gold F Press Fit Vertical Metalized Jacks PC Board Mount [.470] A 6.88 ±0.1 [ ] ± ±0.05 [.271 ±.002] 3.43 ±0.05 [.135 ±.002] [ ].003 (4 Plated-Thru Holes) 1.02 ±0.08 [.040 ±.003] (Plated-Thru Hole) Dim. A Part No Recommended PC Board ayout Insulating Bushing 74 Material Nylon Only to be used on Part Nos and [.575] [.470] 2.96 [.115] 6.61 [.260]
32 BNC Connectors, 75 Ohm (Continued) Press Fit Vertical Metalized Jacks PC Board Mount (Continued) [.688] Sq. 1.7 ±0.05 [.067 ±.002] (2 Places) For Drive Screw 1.02 ±0.08 [.040 ±.003] (Plated-Thru Hole 3 Places) 12.7 ±0.05 [.500 ±.002] 6.35 ±0.05 [.250 ±.002] 12.7 ±0.05 [.500 ±.002] PC Board Thickness (Min.) [.625] 6.35 ±0.05 [.250 ±.002] Recommended PC Board ayout Press Fit, Bulkhead Vertical Metalized Jack includes hardware [.425] 4.37 ± 0.51 [.172 ±.020] 5 Plcs [.135] 6.88 [.271] 3.43 [.135] ø [ø ] [1.133] [.961] 6.88 [.271] Ø 1.02 ± 0.08 [.040 ±.003] [ ] Holes Plated Through 5 Plcs. Right-Angle Metalized Jacks PC Board Mount C 6.15 [.242] 28.4 [1.118] [.432] Mounting Height 6.6 ± 0.08 [.260 ±.003] 3.3 ± 0.08 [.130 ±.003] 6.6 ± 0.08 [.260 ±.003] 2.11 ± 0.08 [.083 ±.003] (4 holes) 1.17 ± 0.08 [.046 ±.003] Recommended PC Board ayout Dielectric Dimension Nickel TPX Gold2.171 [.007] Tin PTFE Gold2.171 [.007] Nickel TPX Gold2.131 [.005] Nickel TPX Gold1.171 [.007] Gold [ ] thick Gold [ ] thick Maximum PC Board Thickness 2.54 [.100] Recommended PC Board ayout ± 0.43 [.450 ±.017] 3.81 ± 0.08 [.150 ±.003] 1.19 ± 0.18 [.047 ±.007] [.436] [.700] [.860] 7.62 ± 0.08 [.300 ±.003] ± 0.38 [1.000 ±.015] 7.62 ± 0.08 [.300 ±.003] 1.78 ± 0.08 [.070 ±.003] TPX is a trademark of Mitsui Chemicals America, Inc
33 BNC Connectors, 75 Ohm (Continued) Right-Angle Metalized Jacks PC Board/Panel Mount 6.15 ± 0.25 [.242 ±.010] [.459] ± 0.51 [1.088 ±.020] ± 0.18 [.432 ±.007] [ ] 1/2-28 Thread 4.34 [.171] [ ] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Dielectric Tin PTFE Bulkhead Jack-Jack Adapter Right-Angle Adapter (Jack-Plug) Nickel Gold Dielectric Polymethylpentene [ ] Nickel Gold Dielectric Polymethylpentene [.572] 11/ [1.420] [ ] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout [.901] [1.062] Bulkhead Jack-Jack Adapter Nickel Gold Dielectric Polymethylpentene [1.420] [ ] Jack-Jack Adapter Nickel Gold Dielectric Polymethylpentene [1.419] Ø ± 0.25 [.625 ±.010] [ ] Recommended Panel Cutout
34 BNC Connectors, 75 Ohm (Continued) Bulkhead Jack-Push On Plug Adapter Ø 8.43 [.332] Ø [ ] Ø [.565] [1.650] 8.89 ± 0.13 [.350 ±.005] Recommended Panel Cutout
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
More informationBroadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
More informationAmphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More information242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
More informationSECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
More informationAmphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System
BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationAmphenol RF- BNC Connector Series
Page 1 of 7 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More informationSTANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
More informationRFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
More informationSMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series
More informationElectrical Components Catalog RF Connectors
Introduction Product Facts Designed and Manufactured to meet MI-C-39012 Requirements Wide Range of Connectors available in 50 and 75 Ohm Impedance The range offers connectors to suit from DC-11 GHz Operation
More informationAmphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications
Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the
More informationSMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
More information242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
More informationSMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
More informationSMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
More information242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
More informationAmphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications
Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems
More informationTNC Series. Interface Mating Dimensions. Coaxial Connectors
TNC connectors are designed with a Highly reliable threaded coupling to ensure additional protection against shocks and vibrations. They are dimensionally and electrically similar to the BNC series, and
More informationØ1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT
SSMB / SSMC This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC). They provide
More informationReversePolarity Series(SMA,BNC,TNC)
RP ReversePolarity Series(SMA,BNC,TNC) Description Reverse polarity BNC, TNC, N & SMA connectors (RP-BNC, RP-TNC, RP-SMA) are designed for uses in wireless applications where a non-standard interface has
More informationCorning Gilbert Inc. Microwave Push-on Interconnects 1
Corning Gilbert Inc. Microwave Push-on Interconnects 1 GPO Specifications General Characteristics Impedance 50 ohms nominal Frequency range DC to 40 GHz Temperature range -65 C thru 165 C Electrical Characteristics
More informationkwiqmate Connectors Product Catalog Johnson
Product Catalog Johnson Emerson Connectivity Solutions, provider of kwiqmate branded Johnson product line of QMA connectors features a push-on style interface. Traditionally SMA plugs need to be configured
More informationSECTION 12. N / Composite N / N 18 GHz R161 / R162 / R163
SECTION 12 12 N / Composite N / N 18 GHz R161 / R162 / R163 Contents Introduction... 12-4 to 12-5 N 50Ω and Composite N Interface... 12-6 Characteristics... 12-8 to 12-9 ECO N characteristics... 12-9
More informationSECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
More informationMMS/MMT MMCX CONTENTS PAGE MMS/MMT
MMCX CONTENTS PAGE MMS/MMT Introduction... 4 General... 5 Characteristics MMS... 6 Characteristics MMT... 7 Connectors...8-9 Plugs... 10 Standard cable assemblies...11-12 Receptacles... 13 Adapters...
More informationGPPO Interconnect Series Product Information
GPPO Interconnect Series Product Information A sub-miniature, push-on, high performance, microwave interconnect system. Developed in response to industry demand for increased package density, lower weight,
More informationLGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
More informationINTRODUCTION A WIDE STANDARD RANGE MANY FULL CRIMP MODELS LOW INTERMODULATION CONNECTORS
N INTROUCTION The new Radiall N series has been developed using the latest advances in connector design. These connectors are easy--to--use, highly reliable, innovative and are designed to meet the needs
More informationSMA Self-Fixture End Launch Connectors
SMA Self-Fixture End Launch Connectors An ideal solution for design engineers who are obligated to cut manufacturing costs and complexity out of their circuit board system. For those microwave engineers
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationInterface Mating Dimensions
connectors are subminiature units designed to provide high electrical performance for microwave applications up to 18GHz. Constructed with Brass or high quality stainless steel, connectors ensure excellent
More informationSMA Self-Fixture End Launch Connectors
SMA Self-Fixture End Launch Connectors INTRODUCTION / APPLICATIONS Applications for these connectors include: An ideal solution for design engineers who are obligated to cut manufacturing costs and complexity
More informationSERIES SMB SUBMINIATURE CONNECTORS
SERIES SMB SUBMINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE The HUBER+SUHNER subminiature connectors Series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.
More informationN Male Connector Clamp/Solder Attachment for RG17, RG218, RG219
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219 RF Connectors Technical Data Sheet PE4433 Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
More informationMCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
More informationQuick Reference Guide RF Coaxial Connectors
Quick Reference Guide Coaxial RF Products: Quick View Product Operating Frequency (Max.) Impedance VSWR Durability (Mating Cycles) Operating Temp. Coupling Style Standard 7/16 7 GHz 50 Ω 1.02 + 0.03f up
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND 10 August 2016 SUPERSEDING 16 November 2011 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, PIN CONTACT, JAMNUT MOUNTED, REAR
More informationSeries 791 Connectors
Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5
More informationBNC 75 OHM CONNECTOR PRODUCTS
BNC 75 OHM CONNECTOR PRODUCTS ADC's BNC Connectors are the most reliable and universally accepted method of terminating coaxial cable in the market today. Outstanding electrical performance (up to 3 GHz)
More informationKCN KCN KCN KCN KCN KCN KCN KCN KCN KCN
series KCN4011200000 KCN4032200040 KCN4041100000 KCN4043110180 KCN4043140000 KCN4011200010 KCN4032200050 KCN4043100000 KCN4043110190 KCN4043140090 KCN4011200020 KCN4041200000 KCN4037100000 KCN4043110220
More informationMBNC Series. Right Angle, Vertical, Surface Mount Receptical with Terminating Resistors and Filtering Capacitors
BNC Connectors MBNC Series - Right Angle, Vertical, Surace Mount Receptical with Terminating Resistors and Filtering Capacitors 10-2 MBNC Series - Right Angle, Vertical, Terminators, and Filtered Board
More informationRF COAXIAL CONNECTORS
RF COAXIAL CONNECTORS 17550 Gillette Avenue, Irvine, California 92614 www.sabritec.com Telephone (949) 250-1244 Fax (949) 250-1009 157 CoAXIAL CONNECTORS SCX Coaxial INTRODUCTION Sabritec offers a complete
More informationCALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
More informationTNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms
More informationSECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
More information3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
More informationRF & MW Connectors. 6 Where signal & Connectivity is needed, There is GigaLane
RF & MW Connectors - 2.4 mm Connectors - 2.92 mm Connectors - Hermetic Seal (0.012 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors
More informationD Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
More informationQN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
More information7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment RF Connectors Technical Data Sheet PE44280 Configuration 7/16 DIN Male Connector MIL-C-39012 50 Ohms Right Angle Body Geometry Features Silver
More informationAMP Precision Pin and Socket Contacts [ ] A ± [6.35] Dia. Ferrule Part No Part No.
Coaxial Contacts Subminiature, Crimp, Snap-In, Size 16 1.010 [25.65] Ref..650 [16.51] Ref. 0.107 +.005.000 [2.718 +.127.000].250 [6.35] A ±.003 ±.076 Material Outer Shell Brass per MIL-C-50 Center Conductor
More informationElectrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
More informationTru products are now under the Tru-Win brand from Winchester Interconnect.
TRU MEIA Series Tru-Win MEIA offers the latest innovation in high power connector design. The MEIA interface provides equivalent kw power handling compared to similar EIA connector line sizes but provides
More informationSINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
More information7/16 GENERAL. DC GHz GENERAL APPLICABLE STANDARDS APPLICATIONS
GENERAL 50 Ω C - 7.5 GHz GENERAL Standard coaxial connectors Screw--on coupling High power rating Excellent RF performance APPLICABLE STANARS IEC 169-4 IN 47223 22 190 APPLICATIONS Mobile communication
More informationSECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3
C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationMIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
More informationRF Microwave Standard Assemblies
RF Microwave Standard Assemblies RF Microwave Standard Assemblies 146 Q-Flex Series Specifications Q-Flex assemblies are a unique ALTERNATIVE to custom designed flexible coaxial cables.traditionally custom
More informationMIL-DTL-39030/3 SMA Terminations. Features & Benefits. Applications. M39030 /3-08 S or N
MIL-DTL-39030/3 SMA Terminations SV Microwave offers military SMA terminations that are 39030 approved. QPL-39030 parts are designed and made under DSCC qualifications in order to resist harsh environments
More information7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features
More informationPin Contacts Military Part Number. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp Glenair Part Glenair Part 22 22-28 AWG M39029/107-620 850-007-22-620 M39029/106-614 850-006-22-614 20 20-24
More information711 Series Single Way DB-1a
711 Series Single Way DB-1a Data Bus Interconnection System Data Bus Interconnection System designed for data transmission as defined by MIL-STD-1553B, STANAG 3838 and DEF STAN 00-18 (Part 2). This system
More informationPERFORMANCE SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB, PIN CONTACT, CLASS 2)
INCH-POUND MIL-PRF-49142/3G 05 February 2016 SUPERSEDING MIL-PRF-49142/3F 18 April 2005 PERFORMANCE SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB, PIN CONTACT,
More information- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationPin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches
More informationJULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
More informationCatalog Revised 10-00
R F C O A X I A L S O L U T I O N S F O R WIRELESS BASE STATION The new Tyco Electronics RF Coaxial Solutions for Communications Equipment catalog combines the best products from industry leading brand
More informationContacts M39029 and Glenair signature solutions MIL-DTL Series III type
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated
More informationLow Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5 reliable performance, dependable service Replace traditional RG types for benefit of: lower loss better shielding > - 90dB Drop in replacement
More informationTNC / TNC 18 GHz series R143 / R144
11 TNC / TNC 18 GHz series R143 / R144 CONTENT TNC Pages TNC Introduction... 11-4 Interface... 11-4 Characteristics... 11-6 TNC Ω Plugs... 11-8 to 11-9 Jacks... 11-9 to 11-11 Receptacles... 11-11 to 11-12
More informationBoard to Board Connector Board to Board Connector
Board to Board Connector Board to Board Connector GigaLane Board to Board connectors are especially developed for board-to-board and board-to-module RF interconnections. It is the perfect solution for
More informationATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications.
ATBTK-MF-4G Bias Tee Kit, AISG Compatible 698-2700 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface 7-16 DIN Female BTS Interface 7-16 DIN Male Dimensions
More informationD-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationN SERIES Coaxial Connectors
Coaxial Connectors Description The Jy Chyun coaxial N connectors are largely products designed to support the applications of the receptor antennas, station equipment, communication systems, and for test
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More informationSMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationTIMES QUALIFIED MILTECH CABLE ASSEMBLIES
TIMES QUALIFIED MILTECH CABLE ASSEMBLIES Starting on page 5 MILTECH Qualified Cable Assemblies Manufactured to the requirements of MIL-C-87104 and MIL-T-81490, FAA FAR25 and DO-160 Fully vapor sealed for
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
More informationTable of Contents. Corning Gilbert Inc. Microwave Push-on Interconnects 1
Table of Contents Corning Gilbert Inc. Microwave Push-on Interconnects 1 TABLE OF CONTENTS General Information II Who We Are III Custom Designs IV Reference Guide GPO Products 2 GPO Specifications 3 Blindmate
More informationQuick Reference Guide KOAXXA SMA RF Interconnects
Quick Reference Guide KOXX SM RF Interconnects TE Connectivity introduces its next generation of RF products with KOXX RF interconnects. This product family premiers with the KOXX SM product line that
More informationSERIES 85 RF, MICROWAVE AND DATALINK CONTACTS
SERIES 5 RF, MICROWAVE AND DATALINK CONTACTS for MIL-DTL-999, Series SuperNine, Series 0 Mighty Mouse, and Series 9 Micro-Crimp connectors APRIL 06 High Speed High Reliability High Availability No more
More informationBroadcast/Audio Full Line Catalog. Video Broadcast Audio Home Entertainment Plugs and Jacks Custom Cable Assemblies
Broadcast/ Full Line Catalog Video Broadcast Home Entertainment Plugs and Jacks Custom Cable Assemblies The quality broadcast and audio experts demand From a wide selection of 75 Ω connectors and our famous
More informationEN2 SERIES SEALED CONNECTORS
FEATURES & BENEFITS Sealed to IP68, NEMA 250 (6P) (when mated) Available in standard or winged coupling ring Patented grommet and o-ring free design Solder/crimp and PC contact options APPLICATIONS Any
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationBNC Connectors. General Description. BNC Configurations. BNC Specifications* Plug Interface** Jack Interface**
N onnectors General Description Delta N connectors are compact, economical, 50Ω impedance connectors with two-stud bayonet coupling. They are best suited for use with cables in the range of.150" to.50"
More informationAmphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol
More informationThe GPO male interface is compliant to MIL-STD-348, and it is in accordance with MIL-PRF-39012a and DESC 94007/94008.
GPO, GPPO and G3PO Application Notes Corning Gilbert s push-on connector products allow users flexibility in modular and board layout (in high density situations), frequency bandwidths from DC to 100 GHz
More informationD-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
More informationCSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
More information