Shrink temperature of 120 C. High-impact, abrasion, corrosion and chemical resistance. Rated for 600V, 90 C continuous use

Size: px

Start display at page:

Download "Shrink temperature of 120 C. High-impact, abrasion, corrosion and chemical resistance. Rated for 600V, 90 C continuous use"

Maria Maxwell
5 years ago
Views:

1 HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements of U.R.D., submersible, and direct burial installations Tubing, featuring an internally applied sealant, offers protection against moisture, and may be used over lead, steel, aluminum, copper, standard plastic and elasmeric insulating materials Shrink temperature of 120 C High-impact, abrasion, corrosion and chemical resistance Rated for 600V, 90 C continuous use Thermoplastic adhesive liner provides complete environmental protection and insulation Meets: UL and CSA standards, ANSI C119.1, Western Underground Guide Numbers 2.4, 2., ICEA and NEMA insulation thickness requirements Continuous operating temperature: - C 110 C HS Series Specifications T&B recommended up 1 kv AS D412, ISO 37 ELONGATION 600% ELONGATION AFTER HEAT AGING (168 HRS. AT 10 O C) 00% AS D2671 LONGITUDINAL CHANGE +1%, -10% LOW TEMPERATURE FLEXIBILITY (4 HRS. AT - O C) SPECIFIC GRAVITY AS D HARDNESS (SHORE D) AS D2240 0D DIELECTRIC STRENGTH AS D V/Mil (20kV/mm) DIELECTRIC VOLTAGE WITHSTAND (00V, 600HZ, 1 MIN.) UL 486D No Breakdown, 24kV 1 min., 1kV 4 hrs. VOLUME RESISTIVITY AS D ohm-cm FLUID RESISTANCE MIL-DTL-2303 Good Excellent FUNGUS RESISTANCE AS G21 No growth COPPER CORROSION AS D2671 No corrosion WATER ABSORPTION AS D70 0.1% ADHESIVE LAP SHEER (1 IN./MIN. AT 23 O C) AS D psi (0.87 MPa) ADHESIVE SOFTENING POINT AS E28 90 o C± o C AS D 1000 WATER PENETRATION S 706 No penetration after 236 hrs. of continuous immersion C4

HS Series Black I.D. I.D. Order multiple is std. pkg.

Wall Fits any listed or certified AL or CU splice with dia. no larger than O.D. Heavy-Wall Tubing ( ft.

08 6 0.38 1.7 HS12-6-4 48 #6 AWG HS6-1 4 #6 AWG HS6-1L 0.7 0.24 0.12 8 0.63 2.0 HS6-1-4 48 #2 AWG HS4-30 #1 AWG 20 HS4-30L 1.10 0.3 0.

47 12 10 HS40-400-4 48 30 kcmil HS00-1000 9 0 kcmil HS00-1000L 2.00 0.63 0.

72 1.7 0.17 30 1 HS40-4-TB 48 00 kcmil I.D. I.D. For 2-Way Connecr Cable Sizes HS12-6LR 0.1 0.16 6 #8 6 AWG HS6-1LR 0.7 0.24 8 #6 2 AWG HS4-30LR 1.

2 HS Series Black I.D. I.D. Order multiple is std. pkg. All lengths have facry-applied sealant **UL not applicable Red Order multiple is std. pkg. All lengths have facry-applied sealant Nom. Wall Fits any listed or certified AL or CU splice with dia. no larger than O.D. Heavy-Wall Tubing ( ft. rolls) Black Cable Range HS #14 AWG HS16-12L HS #10 AWG HS #8 AWG HS12-6L HS #6 AWG HS6-1 4 #6 AWG HS6-1L HS #2 AWG HS4-30 #1 AWG 20 HS4-30L HS /0 AWG HS /0 kcmil HS40-400L HS kcmil HS kcmil HS L HS kcmil HS12-30** kcmil 2 HS30-30** HS30-4** kcmil HS12-40** kcmil HS30-40** HS40-4-TB kcmil I.D. I.D. For 2-Way Connecr Cable Sizes HS12-6LR #8 6 AWG HS6-1LR #6 2 AWG HS4-30LR #1 3/0 AWG 10 Pkg. Qty. I.D. I.D. Nom. Wall Order by reel, not by feet. ft. reels not supplied with facry applied sealant For 2-Way Connecr Cable Sizes HS #14 10 AWG HS #8 6 AWG 0.08 HS #6 #2 AWG HS #1 3/0 AWG HS /0 30 kcmil 0.16 HS kcmil 1 C

3 HSHR Series 6:1 Shrink Ratio High Shrink Ratio Accommodates a wide variety of connecr shapes and configurations Thermoplastic adhesive liner for complete environmental protection and insulation Continuous operating temperature: - C 110 C Shrink temperature: 120 C Flame retardant HSHR Series Specifications I.D. I.D. Nominal Wall Code Cable Size Standard HSHR #22 #46 AWG HSHR #8 700 AWG HSHR # AWG 0.13 HSHR #2 10 AWG 48 HSHR /0 100 kcmil 1 HSHR /0 170 kcmil HSHR kcmil AS D412, ISO 37 ELONGATION 600% ELONGATION AFTER HEAT AGING (168 HRS. AT 10 O C) AS D2671 LONGITUDINAL CHANGE +1%, -10% LOW TEMPERATURE FLEXIBILITY (4 HRS. AT - O C) 00% SPECIFIC GRAVITY AS D HARDNESS (SHORE D) AS D2240 0D DIELECTRIC STRENGTH AS D149, IEC V/Mil (20kV/mm) DIELECTRIC VOLTAGE WITHSTAND (00 V, 60HZ, 1 MIN.) UL 486D No Breakdown, 1kV 4 hrs. VOLUME RESISTIVITY AS D ohm-cm FLUID RESISTANCE MIL-DTL-2303/1 Good Excellent FUNGUS RESISTANCE AS G21 No growth COPPER CORROSION AS D2671 No corrosion WATER ABSORPTION AS D70 0.1% ADHESIVE LAP SHEER (1 IN./MIN. AT 23 O C) AS D psi (0.87 MPa) ADHESIVE SOFTENING POINT AS E28 90 o C± o C AS D 1000 ADHESIVE BLOCKING (30 O C) AS D1146 No blocking WATER PENETRATION S 706 No penetration after 236 hrs. of continuous immersion C6

HSFR Series Flame-Retardant Heavy-Wall Insulates and protects electrical splices and terminations High-impact and abrasion resistance Thermoplastic adhesive liner Rated for 600V, 90 C continuous use.

4 HSFR Series Flame-Retardant Heavy-Wall Insulates and protects electrical splices and terminations High-impact and abrasion resistance Thermoplastic adhesive liner Rated for 600V, 90 C continuous use. Continuous operating temperature: - C 110 C Shrink temperature of 120 C Meets: UL and CSA standards, ANSI C119.1, Western Underground Guide Nos. 2.4, 2., MIL-DTL-2303/1, IEEE 383 Vertical Flame Test, ANSI C , ICEA S-19-8 and NEMA insulation thickness requirements 3:1 Shrink Ratio HSFR Series Specifications I.D. I.D. Order multiple is std. pkg. Standard colour: black Nominal Wall Code Cable Size HSFR #14 #10 AWG HSFR #8 #6 AWG 0.09 HSFR #6 #2 AWG HSFR #1 3/0 AWG HSFR /0 30 kcmil 0.16 HSFR kcmil Standard 48 AS D412, ISO 37 ELONGATION 600% LONGITUDINAL CHANGE AS D %, -10% SPECIFIC GRAVITY AS D ELONGATION AFTER HEAT AGING (168 HRS. AT 17 O C) AS D2671, ISO 37 00% AS D2671 LOW TEMPERATURE FLEXIBILITY (4 HRS. AT - O C) or splitting HARDNESS (SHORE D) AS D2240 0D OXYGEN INDEX AS D FLAMMABILITY AS D2671 Flame Retardant DIELECTRIC STRENGTH AS D V/Mil (20kV/mm) DIELECTRIC VOLTAGE WITHSTAND (00 V, 60HZ, 1 MIN.) UL 486D No Breakdown, 24kV 4hrs, 1kV 4 hrs. VOLUME RESISTIVITY AS D ohm-cm FLUID RESISTANCE MIL-DTL-2303/ Good Excellent FUNGUS RESISTANCE AS G21 No growth COPPER CORROSION AS D2671 No corrosion WATER ABSORPTION AS D70 0.2% ADHESIVE LAP SHEER (1 IN./MIN. AT 23 O C) AS D psi (0.87 MPa) ADHESIVE SOFTENING POINT AS E28 90 o C± o C AS D 1000 ADHESIVE BLOCKING (30 O C) AS D1146 No blocking ADHESIVE WATER ABSORPTION AS D70 Less than 0.3% WATER PENETRATION S 706 No penetration after 286 hrs. of continuous immersion C7

5 HSC Series 3:1 Shrink Ratio Provides effective method for sealing cable ends, pipe conduit, etc. Extra thickness at the tip of the end cap prevents sharp ends of the cable from puncturing the seal Flame retardant Rated from 600/1000V, 90 degrees continuous use Shrink temperature of 120 C Resistant common fluids and solvents liner provides complete environmental protection and insulation Heat indicating lines. Continuous operating temperature: - C 110 C Heat-Shrinkable End Caps HSC Series Specifications I.D. I.D. Wall Order multiple is std. pkg. *Not UL Listed or CSA Certified Code Cable Size Nom. HSC #8 #6 AWG HSC #6 #2 AWG HSC #1 3/0 AWG 3.00 HSC /0 30 kcmil 3. 0 HSC kcmil HSC kcmil HSC300* kcmil 4.0 HSC00* kcmil.0 ELONGATION AS D412, ISO 37 0% ELONGATION AFTER HEAT AGING (168 HRS. AT 10 O C) 00% LONGITUDINAL CHANGE ON RECOVERY AS D %, -10% LOW TEMPERATURE FLEXIBILITY (4 HRS. AT - O C) SPECIFIC GRAVITY AS D HARDNESS (SHORE D) AS D2240 0D DIELECTRIC STRENGTH AS D149, IEC V/Mil (20kV/mm) DIELECTRIC VOLTAGE WITHSTAND (00 V, 60HZ, 1 MIN.) UL 486D No Breakdown, 1kV 4 hrs. VOLUME RESISTIVITY AS D ohm-cm FLUID RESISTANCE MIL-DTL-2303 Good Excellent FUNGUS RESISTANCE AS G21 No growth COPPER CORROSION AS D2671 No corrosion WATER ABSORPTION AS D70 0.1% ADHESIVE LAP SHEER (1 IN./MIN. AT 23 O C) AS D psi (0.87 MPa) ADHESIVE SOFTENING POINT AS E28 90 o C± o C AS D 1000 (mod.) ADHESIVE BLOCKING (30 O C) AS D1146 No blocking WATER PENETRATION S 706 No penetration after 236 hrs. of continuous immersion ROOM TEMPERATURE 168 hrs./40 psi TEMP. CYCLING (-40 O C TO 60 O C) 0 cycles/1 psi No leaks BURST PRESSURE 100 psi (0.70 MPa) C8

HSB Series Heat-Shrinkable Breakout Boots Boots for 2-, 3- and 4-way cable breakouts Thermoplastic adhesive liner provides complete environmental protection and insulation Meets ESI 09-11 Strain

multiple is std. pkg. No. Legs HSB Series Specifications Dia. (min.) D d L TB TL Dia. (max.) Dia. (min.) Dia. (max.) (nom.) Wall Thickness of body (nom.) Wall Tickness of legs (nom.

6 HSB Series Heat-Shrinkable Breakout Boots Boots for 2-, 3- and 4-way cable breakouts Thermoplastic adhesive liner provides complete environmental protection and insulation Meets ESI Strain relief and mechanical protection Continuous operating temperature: - C 100 C Shrink temperature of 13 C TB TL Wall Thickness of Body Wall Thickness of Leg D d L Heat-Shrinkable Breakout Boots Order multiple is std. pkg. No. Legs HSB Series Specifications Dia. (min.) D d L TB TL Dia. (max.) Dia. (min.) Dia. (max.) (nom.) Wall Thickness of body (nom.) Wall Tickness of legs (nom.) Application Legs 600V Conducr AWG/kcmil HSB #3 300 HSB #8 3/0 HSB #1 600 HSB HSB #12 2/0 HSB # HSB / HSB / HSB HSB HSB / ULTIMATE ELONGATION AS D412, ISO % ELONGATION AFTER HEAT AGING (168 HRS. AT 17 O C) 20% No dripping, cracking, flowing AS2671 LOW TEMPERATURE FLEXIBILITY (- O C) FLAMMABILITY AS D630 Self ext. within 1.97 sec. DIELECTRIC STRENGTH AS D V/Mil (11kV/mm) WATER ABSORPTION AS D % C9

Heat-Shrinkable Tubing

Heat-Shrinkable Tubing HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements