Medium Voltage Power Cables
|
|
- Trevor Hardy
- 6 years ago
- Views:
Transcription
1 N2XSY 6/0, /20, /30 NA2XSY 6/0, /20, /30 N2XS2Y 6/0, /20, /30 NA2XS2Y 6/0, /20, /30 N2XS(F)2Y 6/0, /20, /30 NA2XS(F)2Y 6/0, /20, /30 N2XSEY 3 x 6/0 Medium Voltage Power Cables Photo: HELUKABEL Q 47
2 Medium Voltage Power Cables XLPE-insulated 6/0, /20, /30 Since about 970 the cross-linked polyethylene (XLPE)-insulated power cables have been used in Germany. The XLPE-insulation possesses very good electrical, mechanical and thermal characteristics in medium networks. This type of insulation is very chemically resistant and also resistant to cold. Due to various advantages, the XLPE-insulated type has vastly displaced the traditional classical paperinsulated types in many sectors. In order to prevent the penetration of moisture and also to extend the duration of life, the XLPEinsu-lated medium cables are designed with longitudinally water-proof screen including an additional swell tape and a PE outer sheath. The manufacture of this sheath is based on high density polyethylene (HDPE), in which an additive organic peroxide is mixed. Due to the heating and pressure the molecule chains are joined to each other, assuring the transition from thermoplastic to elastic condition. In comparison to PVC and paper-insulated cables, the advantage of XLPE-insulated medium power cables is that they possess a low dielectric factor, such as it is 00 times smaller than of PVCinsulated cables. Moreover, a better dielectric constant has an effect on the low mutual capacitance, the shortcircuit to ground and the charging current of XLPEinsulated cables. The good properties of XLPE-insulated cables remain constant through a wide temperature range. Characteristics of XLPE permissible operating temperature For permanent (normal) operation + 90 C In short circuit +0 C In overload operation and damage by sea up to +30 C Specific heat resistance 3,5 K m/w Dielectric constant 2,4 Specific resistance (20 C) min. 0 Ohm cm Loss factor (tan ) (20 C) 0,5 0 3 Density 0,92 g/cm 3 Breaking strength min. 200% Tensile strength min. N/ 2 Conductor Copper or aluminium, round, multiwire stranded and compact, according to VDE 0295 and HD 33. Inner semi-conducting layer Semi-conducting compound, cross-linked, mini-mum wall- 0,3. Cross-linked polyethylene (XLPE), compound type 2XI according to DIN VDE 0207 part 22 and HD nominal wall- for 6/0 = /20 = /30 =,0 Outer semi-conducting layer Outer semi-conducting layer is extruded together with the inner semi-conducting layer and the insulation in one working process and are spliced with each other. Semi-conducting compound, cross-linked, wall 0,3 to 0,6. Concentricity of conductor The difference between the maximum and mini-mum of 0,5 should not be exceeded. Semi-conducting type Over the outer semi-conducting layer, a semi-conducting tape must be used. Screen Screening of copper wires must have a minimum diameter of 0,5 and over that a copper tape applied helically with a minimum of 0,. Copper cross-section according to DIN VDE 0273 and 0276 to the corresponded table 2. Separator Over the screen as well as under outer jacket, a separating layer must be used (e. g. taping). Outer jacket PE compound DMP2 according to HD 620. and 2YM3 to DIN VDE 0276 part 3, black or PVC compound DMV6 according to HD 620. and YM5 to DIN VDE 0207 part 5, red Wall- =, for x /30 = 2,6 Continuation Q Q 4
3 Medium Voltage Power Cables XLPE-insulated 6/0, /20, /30 Laying of Cable In order to avoid any damage, the XLPE-insulated medium cables should carefully laid and installed. It must be ensured that the cables should not be pulled over the hard or sharp edges. The cable ends must be water-tight-sealed. After cutting the length both ends must be sealed iediately. A laying depth of 60 to 0 cm is recoended. Single conductor cables are normally arranged in a trefoil touching or triangular shape. For laying in conduits, the influence of thermal insulation of air space between the cable and the inner wall of conduit should be specially considered. The inner diameter of the conduit should be at least,5 times that of the diameter of the cable. Bending radius During the laying of XLPE cables, the bending radius should not be below of the following s: Cable without metal sheath = 5 x cable Ø Cable with Alu-laminated sheath = 30 x cable Ø Temperature range During the installation, the temperature should not be below the following s: for XLPE-insulation + PVC jacket = 5 C for XLPE-insulation + PE jacket = 20 C Max. permissible tensile strength By pulling the conductors with a pulling head (not for armoured cables) P = No. of cores x conductor cross-section x = permissible pulling tension N/ 2 For Cu-conductor: 50 N/ 2 For Alu-conductor: 30 N/ 2 Current carrying capacity according to VDE 0276 part 620, 5C or HD 620 S Laying in earth (ground) Laying depth 0,7 0, m Earth temperature in the laying depth 20 C Specific heat resistance,0 K m/w Load factor 0,7 (EVU-Load) Laying in conduits Cables for conduit systems laying in earth, a reduction of the current carrying capacity with a factor of 0,5 is recoended. Test s Kind of test Voltage test in Voltage test a. c. in Voltage test d. c. in Voltage test a. c. 54 ( test = 000 h) Voltage test to cable system During the operation or after laying the medium power cables, the dielectric can be tested with alternating or direct current. The test duration continues 30 minutes. Kind of test Voltage test a. c. in Voltage test d. c in up to 4 up to 96 up to 0 U 0 /U = 6/0 U 0 /U = 6/0 U 0 /U = /20 U 0 /U = /20 U 0 /U = /30 U 0 /U = /30 Laying in air Air temperature 30 C Load factor (permanent load),0 Q 49
4 N2XSY 6/0, /20, /30 XLPE-insulated, Cu-conductor, single core, screened, PVC-jacket Technical data XLPE-insulated power cables to DINVDE0276 part620, HD620S and IEC60502 Temperature range during installation up to -5 C Operating temperature 90 C Short circuit temperature 0 C (short circuit duration up to 5 sec.) s U0/U 6/0, /20, /30 Operating s for 6/0 = /20 = /30 = Test s for 6/0 = 5 /20 = 30 /30 = 45 Minimum bending radius during installation 5x cable ø Power ratings table see Technical Informations Cable structure Circular bare Cu-conductor of stranded wires to HD33 Inner semi-conducting coating Core insulation of cross-linked Polyethylene (XLPE), PE-compound DIX to HD620. Outer extrusion of semi-conducting coating spliced with the insulation Wrapping of conductive material Screen: Braiding of copper wires with one or two tape(s) applied helically Wrapping PVC outer jacket, compound DMV6 to HD620. colour red Properties PVC self-extinguishing and flame retardant according to VDE , DIN EN / IEC (equivalent DINVDE0472 part04 test methodb) The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Installation notes To guarantee an optimum on operating reliability the extruded semi-conductive layer is spliced with the insulation for long duration. For this reason we recoend a peeling tool for installation. Note Further dimensions available on request. Application Suitable for installation mostly for power supply stations, in indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. Due to the good laying characteristic, this can also be laid easily in difficult line guideways. The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliability ² x rm / x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / x rm / x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / x50 rm / x70 rm / / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 min. - 23,0-2,0,0-29,0 26,0-3,0 26,0-32,0 2,0-34,0 29,0 -,0 29,0 -,0 3,0-37,0 3,0-37,0,0-4,0 40,0-45,0 43,0-4,0 27,0-32,0 2,0-33,0 30,0 -,0 3,0 -,0 32,0-3,0,0-4,0,0-4,0 3,0-44,0 3,0-44,0 40,0-46,0 43,0-49,0 46,0-52,0 32,0-3,0 34,0-40,0 kg/km 5,0 54,0 094,0 334,0 723,0 22,0 95,0 6,0 7,0 33,0 594,0 5,0 54,0 094,0 334,0 22,0 723,0 95,0 7,0 6,0 33,0 594,0 54,0 Weight kg/km 905,0 00,0 30,0 50,0 0,0 220,0 2040,0 0,0 50,0 3000,0 330,0 370,0 4670,0 5750,0 0,0 50,0 50,0 70,0 2070,0 230,0 20,0 20,0 2650,0 30,0 3260,0 4020,0 4930,0 6050,0 40,0 730, kcmil kcmil Continuation Q Q 50
5 N2XSY 6/0, /20, /30 XLPE-insulated, Cu-conductor, single core, screened, PVC-jacket ² x95 rm / x0 rm / x50 rm / x5 rm / x0 rm / x300 rm / x400 rm / x500 rm / Dimensions and specifications may be changed without prior notice. (RQ03) min. -,0-4,0 37,0-43,0 3,0-44,0 40,0-46,0 42,0-4,0 45,0-5,0 4,0-54,0 5,0-57,0 kg/km 094,0 334,0 723,0 7,0 33,0 594,0 Weight kg/km 2060,0 2330,0 2720,0 300,0 3730,0 4000,0 5330,0 640,0 000 kcmil Core end sleeves and cable lugs Core end sleeves Solderless terminals Tubular cable lugs Compression joints You can find core end sleeves and cable lugs in our catalogue Cable Accessories. Request it now at Q 5
6 NA2XSY 6/0, /20, /30 XLPE-insulated, alu-conductor, single core, screened, PVC-jacket Technical data XLPE-insulated power cables to DINVDE0276 part620, HD620S and IEC60502 Temperature range during installation up to -5 C Operating temperature 90 C Short circuit temperature 0 C (short circuit duration up to 5 sec.) s U0/U 6/0, /20, /30 Operating s for 6/0 = /20 = /30 = Test s for 6/0 = 5 /20 = 30 /30 = 45 Minimum bending radius during installation 5x cable ø Power ratings see Technical Informations Cable structure Circular bare alu-conductor of stranded wires to HD33 Inner semi-conducting coating Core insulation of cross-linked Polyethylene (XLPE), PE-compound DIX to HD620. Outer extrusion of semi-conducting coating spliced with the insulation Wrapping of conductive material Screen: Braiding of copper wires with one or two tapes applied helically Wrapping PVC outer jacket, compound DMV6 to HD620. colour red Properties self-extinguishing and flame retardant according to VDE , DIN EN / IEC (equivalent DINVDE0472 part04 test methodb) The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Installation notes To guarantee an optimum on operating reliability the extruded semi-conductive layer is spliced with the insulation for long duration. For this reason we recoend a peeling tool for installation Note Further dimensions available on request. Application Suitable for installation mostly for power supply stations, in indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. Due to the good laying characteristic, this can also be laid easily in difficult line guideways. The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliability ² x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / x50 rm / x70 rm / / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 min. -,0-29,0 26,0-3,0 26,0-32,0 2,0-34,0 29,0 -,0 29,0 -,0 3,0-37,0 3,0-37,0,0-4,0 40,0-45,0 43,0-4,0 2,0-33,0 30,0 -,0 3,0 -,0 32,0-3,0,0-4,0,0-4,0 3,0-44,0 3,0-44,0 40,0-46,0 43,0-49,0 46,0-52,0 32,0-3,0 34,0-40,0 kg/km 2,0 2,0 2,0 2,0 23,0 2,0 23,0 2,0 23,0 2,0 23,0 2,0 2,0 2,0 2,0 2,0 23,0 2,0 23,0 23,0 2,0 23,0 2,0 2,0 Alu Weight kg/km kg/km 45,0 203,0 276,0 34,0 4,0 4,0 70,0 0,0 450,0 45,0 203,0 276,0 34,0 4,0 4,0 70,0 0,0 450,0 45,0 203,0 70,0 75,0 990,0 0,0 30,0 40,0 460,0 405,0 60,0 5,0 90,0 2,0 2750,0 950,0 0,0 20,0 30,0 460,0 520,0 60,0 720,0 90,0 0,0 2220,0 2620,0 3030,0 60,0 0,0 000 kcmil 000 kcmil Continuation Q Q 52
7 NA2XSY 6/0, /20, /30 XLPE-insulated, alu-conductor, single core, screened, PVC-jacket ² x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / Dimensions and specifications may be changed without prior notice. (RQ03) 2,6 min. -,0-4,0 37,0-43,0 3,0-44,0 3,0-44,0 40,0-46,0 40,0-46,0 42,0-4,0 42,0-4,0 45,0-5,0 4,0-54,0 5,0-57,0 kg/km 2,0 2,0 2,0 23,0 2,0 23,0 23,0 2,0 23,0 Alu Weight kg/km kg/km 276,0 34,0 4,0 4,0 70,0 0,0 450,0 50,0 0,0 760,0 0,0 960,0 2020,0 2260,0 220,0 60,0 2960,0 3460,0 000 kcmil Tools Cable shears Box spanners Strippers Crimping tools Pliers Skinning knife You can find tools in our catalogue Cable Accessories. Request it now at Q 53
8 N2XS2Y 6/0, /20, /30 XLPE-insulated, Cu-conductor, single core, screened, PE-jacket Technical data Cable structure Properties XLPE-insulated power cables to IEC60502, Circular bare cu-conductor of stranded The materials used in manufacture are DINVDE0276 part620, HD620S Temperature range wires to HD33 Inner semi-conducting coating cadmium-free and contain no silicone and free from substances harmful to the during installation up to -20 C Operating temperature Core insulation of cross-linked Polyethylene (XLPE), PE-compound DIX to HD620. wetting properties of lacquers Installation notes 90 C Outer extrusion of semi-conducting To guarantee an optimum on operating Short circuit temperature coating spliced with the insulation reliability the extruded semi-conductive 0 C (short circuit duration up to 5 sec.) Wrapping of conductive material layer is spliced with the insulation for long s U0/U 6/0, /20, /30 Screen: Braiding of copper wires with one or two tapes applied helically duration. For this reason we recoend a peeling tool for installation. Operating s for Wrapping 6/0 = PE-outer jacket black, compound DMP2 to Note /20 = HD620. /30 = colour black Further dimensions available on request. Test s for 6/0 = 5 /20 = 30 /30 = 45 Minimum bending radius during installation 5x cable ø Power ratings table see Technical Informations Application Suitable for indoor installation and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. The PE-outer jacket is resistant to high mechanical stress for laying the cables. This PE-jacket is not flame-resistant (does not conform the test method B, as per VDE0472 part04). The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliability ² x rm / x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / x rm / x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / x50 rm / x70 rm / / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 min. - 23,0-2,0,0-29,0 26,0-3,0 26,0-32,0 2,0-34,0 29,0 -,0 29,0 -,0 3,0-37,0 3,0-37,0,0-4,0 40,0-45,0 43,0-4,0 27,0-32,0 2,0-33,0 30,0 -,0 3,0 -,0 33,0-3,0 34,0-39,0 34,0-39,0,0-4,0,0-4,0 39,0-44,0 39,0-44,0 4,0-46,0 44,0-49,0 47,0-52,0 32,0-3,0 34,0-40,0 kg/km 5,0 54,0 09,0 334,0 22,0 7,0 95,0 6,0 7,0 33,0 594,0 5,0 54,0 094,0 334,0 723,0 22,0 95,0 6,0 7,0 33,0 594,0 54,0 Weight kg/km 90,0 990,0 05,0 520,0 760,0 2020,0 230,0 70,0 20,0 2960,0 3020,0 30,0 4560,0 550,0 960,0 0,0 40,0 70,0 960,0 230,0 2220,0 2670,0 2620,0 30,0 3270,0 30,0 420,0 560,0 40,0 60, kcmil kcmil Continuation Q Q 54
9 N2XS2Y 6/0, /20, /30 XLPE-insulated, Cu-conductor, single core, screened, PE-jacket ² x95 rm / x0 rm / x50 rm / x5 rm / x0 rm / x300 rm / x400 rm / x500 rm / Dimensions and specifications may be changed without prior notice. (RQ03) min. -,0-4,0 37,0-43,0 3,0-44,0 40,0-46,0 42,0-4,0 45,0-5,0 4,0-54,0 5,0-57,0 kg/km 094,0 334,0 723,0 7,0 33,0 594,0 Weight kg/km 970,0 2220,0 2650,0 290,0 70,0 4220,0 570,0 6260,0 000 kcmil Signal and power circular connectors Series A, B, C, D, F and S Tools Accessories Online configurator Pre-assembled cables You can find signal and power circular connectors in our catalogue Cable Accessories. Request it now at Q 55
10 NA2XS2Y 6/0, /20, /30 XLPE-insulated, Cu-conductor, single core, screened, PE-jacket Technical data XLPE-insulated power cables to DINVDE0276 part620, HD620S and IEC60502 Temperature range during installation up to -20 C Operating temperature 90 C Short circuit temperature 0 C (short circuit duration up to 5 sec.) s U0/U 6/0, /20, /30 Operating s for 6/0 = /20 = /30 = Test s for 6/0 = 5 /20 = 30 /30 = 45 Minimum bending radius during installation 5x cable ø Power ratings table see Technical Informations Cable structure Circular bare alu-conductor of stranded wires to HD33 Inner semi-conducting coating Core insulation of cross-linked Polyethylene (XLPE), PE-compound DIX to HD620. Outer extrusion of semi-conducting coating spliced with the insulation Wrapping of conductive material Screen: Braiding of copper wires with one or two tapes applied helically Wrapping PE-outer jacket black, compound DMP2 to HD620. colour black Properties The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Installation notes To guarantee an optimum on operating reliability the extruded semi-conductive layer is spliced with the insulation for long duration. For this reason we recoend a peeling tool for installation. Note Further dimensions available on request. Application Suitable for indoor installation and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. The PE-outer jacket is resistant to high mechanical stress for laying the cables. This PE-jacket is not flame-resistant (does not conform the test method B, as per VDE0472 part04). The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliability ² x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x50 rm / x5 rm / x5 rm / x0 rm / x0 rm / x300 rm / x400 rm / x500 rm / x50 rm / x70 rm / / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 min. -,0-29,0 26,0-3,0 26,0-32,0 2,0-34,0 29,0 -,0 29,0 -,0 3,0-37,0,0-4,0 40,0-45,0 43,0-4,0 2,0-33,0 30,0 -,0 3,0 -,0 32,0-3,0,0-4,0,0-4,0 3,0-44,0 3,0-44,0 40,0-46,0 43,0-49,0 46,0-52,0 32,0-3,0 34,0-40,0 kg/km 2,0 2,0 2,0 2,0 2,0 23,0 23,0 2,0 2,0 23,0 23,0 2,0 2,0 2,0 2,0 23,0 2,0 23,0 2,0 23,0 2,0 23,0 2,0 2,0 Alu Weight kg/km kg/km 45,0 203,0 276,0 34,0 4,0 4,0 70,0 0,0 450,0 45,0 203,0 276,0 34,0 4,0 4,0 70,0 0,0 450,0 45,0 203,0 70,0 790,0 920,0 990,0 0,0 20,0 370,0 60,0 40,0 530,0 20,0 2220,0 70,0 90,0 970,0 0,0 0,0 420,0 370,0 570,0 530,0 30,0 720,0 2070,0 60,0 290,0 0,0 70,0 000 kcmil 000 kcmil Continuation Q Q 56
11 NA2XS2Y 6/0, /20, /30 XLPE-insulated, Cu-conductor, single core, screened, PE-jacket ² x95 rm / x0 rm / x50 rm / x5 rm / x0 rm / x300 rm / x400 rm / x500 rm / Dimensions and specifications may be changed without prior notice. (RQ03) min. -,0-4,0 37,0-43,0 3,0-44,0 40,0-46,0 42,0-4,0 45,0-5,0 4,0-54,0 5,0-57,0 kg/km 2,0 2,0 23,0 23,0 23,0 23,0 Alu Weight kg/km kg/km 276,0 34,0 4,0 70,0 0,0 450,0 30,0 530,0 720,0 0,0 20,0 2370,0 220,0 320,0 000 kcmil Cable Glands Cable glands for standard applications Plastic Glands Cable Glands of Brass Accessories Cable glands for special application conditions for electromagnetic compatibility EMC for rugged applications and special chemical resistance for high temperature use for explosive areas for special mounting conditions for special pressure conditions You can find cable glands in our catalogue Cable Accessories. Request it now at Q 57
12 N2XS(F)2Y 6/0, /20, /30 XLPE-insulated, Cu-conductor, single core, longitudinally water-tight, screened, PE-jacket Technical data Cable structure XLPE-insulated power cables to DINVDE0276 part620, HD620S and IEC60502 Circular bare Cu-conductor of stranded wires to DINVDE0295 cl.2 bzw. IEC6022 cl.2 Temperature range Inner semi-conducting coating during installation up to -20 C Core insulation of cross-linked Polyethylene Operating temperature (XLPE), PE-compound DIX to HD C Outer extrusion of semi-conducting Short circuit temperature coating spliced with the XLPE-insulation 0 C (short circuit duration up to 5 sec.) Longitudinally water-tight, conductive s wrapping U0/U 6/0, /20, /30 Screen: Braiding of copper wires with one Operating s for or two tapes applied helically 6/0 = Longitudinally water-tight wrapping /20 = PE-outer jacket, compound DMP2 to /30 = HD620. Test s for colour black 6/0 = 5 /20 = 30 /30 = 45 Minimum bending radius during installation 5x cable ø Power ratings table see Technical Informations Properties The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Installation notes To guarantee an optimum on operating reliability the extruded semi-conductive layer is spliced with the insulation for long duration. For this reason we recoend a peeling tool for installation Note AWG sizes are approximate equivalent s. The actual cross-section is in ². For longitudinally and crosswise water-tight cable type N2XS(FL)2Y with PE-copolymere coated aluminium. Further types and dimensions on request. Application Suitable for indoor installation and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. The PE-outer jacket is resistant to high mechanical stress for laying the cables. This PE-jacket is not flame-resistant (does not conform the test method B, as per VDE0472 part04). The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliability ² x rm / x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x5 rm / x0 rm / x300 rm / x400 rm / x500 rm / x rm / x50 rm / x70 rm / x95 rm / x0 rm / x50 rm / x5 rm / x0 rm / x300 rm / x400 rm / x500 rm / x50 rm / x70 rm / / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 Screen ² 26,0 2,0 30,0 3,0 32,0 34,0,0 3,0 40,0 44,0 47,0 3,0 33,0 34,0,0 37,0 39,0 4,0 43,0 45,0 4,0 52,0 37,0 3,0 kg/km 5,0 54,0 094,0 334,0 723,0 7,0 33,0 594,0 5,0 54,0 094,0 334,0 723,0 7,0 33,0 594,0 54,0 Weight kg/km 050,0 50,0 460,0 700,0 2030,0 20,0 2700,0 3300,0 3900,0 450,0 6000,0 0,0 400,0 550,0 00,0 250,0 00,0 0,0 30,0 0,0 4900,0 600,0 700,0 950, kcmil kcmil Continuation Q Q 5
13 N2XS(F)2Y 6/0, /20, /30 XLPE-insulated, Cu-conductor, single core, longitudinally water-tight, screened, PE-jacket ² x95 rm / x0 rm / x50 rm / x5 rm / x0 rm / x300 rm / x400 rm / x500 rm / Dimensions and specifications may be changed without prior notice. (RQ03) Screen ² 40,0 42,0 43,0 45,0 47,0 50,0 53,0 56,0 kg/km 094,0 334,0 723,0 7,0 33,0 594,0 Weight kg/km 2300,0 2600,0 3000,0 30,0 400,0 400,0 5750,0 6700,0 000 kcmil Conduits Corrugated tubes for standard applications for lager sizes scissile corrugated tubes conduit glands High flexible conduits plastic conduits with spiral spring metal conduits conduits glands Conduit for heavy mechanical duty metal conduits with plastic sheat plastic conduits conduits glands for metal conduits You can find conduits in our catalogue Cable Accessories. Request it now at Q 59
14 NA2XS(F)2Y 6/0, /20, /30XLPE-insulated, alu-conductor, single core, longitudinally water-tight, screened, PE-jacket Technical data XLPE-insulated power cables to DINVDE0276 part620, HD620S and IEC60502 Temperature range during installation up to -20 C Operating temperature 90 C Short circuit temperature 0 C (short circuit duration up to 5 sec.) s U0/U 6/0, /20, /30 Operating s for 6/0 = /20 = /30 = Test s for 6/0 = 5 /20 = 30 /30 = 45 Minimum bending radius during installation 5x cable Ø Power ratings table see Technical Informations Cable structure Circular bare alu-conductor of stranded wires to DINVDE0295 cl.2 and IEC6022 cl.2 Inner semi-conducting coating Core insulation of cross-linked Polyethylene (XLPE), PE-compound DIX to HD620. Outer extrusion of semi-conducting coating spliced with the XLPE-insulation Longitudinally water-tight, conductive wrapping Screen: Braiding of copper wires with one or two tapes applied helically Longitudinally water-tight wrapping PE-outer jacket, compound DMP2 to HD620. colour black Properties The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Installation notes To guarantee an optimum on operating reliability the extruded semi-conductive layer is spliced with the insulation for long duration. For this reason we recoend a peeling tool for installation. Note AWG sizes are approximate equivalent s. The actual cross-section is in ². For longitudinally and crosswise water-tight cable type NA2XS(FL)2Y with PE-copolymere coated aluminium. Further types and dimensions on request. Application Suitable for indoor installation and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. The PE-outer jacket is resistant to high mechanical stress for laying the cables. This PE-jacket is not flame-resistant (does not conform the test method B, as per VDE0472 part04). The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliability ² x x50 x70 x95 x0 x50 x5 x0 x300 x400 x500 x50 x70 x95 x0 x50 x5 x0 x300 x400 x500 x50 x70 rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / rm / / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 / 20 Screen ² 26,0 2,0 30,0 3,0 32,0 34,0,0 3,0 40,0 44,0 47,0 33,0 34,0,0 37,0 39,0 4,0 43,0 45,0 4,0 52,0 37,0 3,0 kg/km 2,0 2,0 2,0 2,0 2,0 23,0 23,0 23,0 23,0 2,0 2,0 2,0 2,0 23,0 23,0 23,0 23,0 2,0 2,0 Alu Weight kg/km kg/km 02,0 70,0 45,0 50,0 203,0 90,0 276,0 00,0 34,0 50,0 4,0 0,0 420,0 30,0 70,0 950,0 0,0 20,0 450,0 270,0 45,0 920,0 203,0 030,0 276,0 40,0 34,0 50,0 4,0 320,0 570,0 70,0 70,0 200,0 0,0 0,0 450,0 2900,0 45,0 50,0 203,0 500, kcmil 000 kcmil Continuation Q Q 60
15 NA2XS(F)2Y 6/0, /20, /30XLPE-insulated, alu-conductor, single core, longitudinally water-tight, screened, PE-jacket ² x95 x0 x50 x5 x0 x300 x400 x500 rm / rm / rm / rm / rm / rm / rm / rm / Dimensions and specifications may be changed without prior notice. (RQ03) Screen ² 40,0 42,0 43,0 45,0 47,0 50,0 53,0 56,0 kg/km 2,0 2,0 23,0 23,0 23,0 23,0 Alu Weight kg/km kg/km 276,0 700,0 34,0 00,0 4,0 2050,0 250,0 00,0 70,0 2700,0 0,0 3200,0 450,0 55,0 000 kcmil Drag Chain Systems Open chains Closed chains Accessories Installation instructions Selection tables You can find drag chain systems in our catalogue Cable Accessories. Request it now at Q 6
16 N2XSEY 3 x... 6/0 XLPE-insulated, Cu-conductor, PVC-jacket Technical data Three core XLPE-insulated power cables to VDE0276 and IEC60502 Temperature range during installation up to -5 C Operating temperature 90 C Short circuit temperature core 0 C screen 0 C (duration) (short circuit duration up to 5 sec.) s U0/U 6/0 Operating s Test s 5 Test s d.c. 4 Power rating to DINVDE029 part2 Minimum bending radius during installation 5x cable ø Tests according to DINVDE0276 und IEC60502 Cable structure Circular bare Cu-conductor of stranded wires to DINVDE0295 cl.2 and IEC6022 cl.2 Inner semi-conducting coating Core insulation of cross-linked Polyethylene (XLPE), PE-compound DIX to HD620. Outer extrusion of semi-conducting coating spliced with the XLPE-insulation Conductive wrapping Screen: Braiding of copper wires with one or two tapes applied helically 3 cores stranded Extruded sheath over three cores PVC outer jacket, compound DMV6 to HD405. and HD620/ colour red Properties self-extinguishing and flame retardant according to DINVDE042 part265-2-/ EN / IEC (equivalent DINVDE0472 part04 test methodb) The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Installation notes To guarantee an optimum on operating reliability the extruded semi-conductive layer is spliced with the insulation for long duration. For this reason we recoend a peeling tool for installation. Note AWG sizes are approximate equivalent s. The actual cross-section is in ². For laying in earth: For ground thermal resistivity of K m/w, laying depth0,7m, ground temperature20 C, EVU load grade0,7. For laying in air: Air temperature 30 C, EVU load grade,0. Conversion factors for laying in earth especially for laying in bundle form and other requirements are noted din DINVDE029 part2 and 0276 part000. Conversion factors for laying in air Air temperature/conversion factor 5 C/,; 20 C/,0; C/,04; 30 C/,0; C/0,96; C/0,96; 40 C/0,9; 45 C/0,7; 50 C/0,2; Application Suitable for installation in indoors and in cable ducts, outdoors as well as for laying on racks for industrial and switching systems and power plants. Limited use when buried in the earth if the PVC outer jacket could be damaged by high mechanical stress. The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliability ² 3x rm / 3x rm / 3x50 rm / 3x70 rm / 3x95 rm / 3x0 rm / 3x50 rm / 3x5 rm / 3x0 rm / 3x300 rm / Screen ² 2,6 2, 2,9 3 3, 3,3 3,3 43,0 4,0 50,0 54,0 5,0 6,0 65,0 6,0 74,0 79,0 kg/km 046,0 0,0 70,0 20,0 2995,0 375,0 46,0 5645,0 7274,0 90,0 Weight kg/km 0,0 3300,0 3750,0 4650,0 5700,0 6700,0 7900,0 9200,0 450,0 4450,0 4 2 Q Dimensions and specifications may be changed without prior notice. (RQ03) Q 62
Y-CY-JZ flexible, CU-screened, transparent, EMC-preferred type, meter marking
Y-CY-JZ flexible, CU-screened, transparent, EMC-preferred type, meter marking A Technical data Special PVC control cables, adapted to DINVDE0 part3 Temperature range flexing -5 C ) to +0 C fixed installation
More informationSelection table for flat & ribbon cables
Just click on the products in the selection table. Click on the HELUKABEL logo at the end of the page to go back. Cables & Wires Selection table for flat & ribbon cables www.helukabel.com FLAT & RIBBON
More informationHO7RN-F 450/750V BS EN Highly Flexible Rubber Cable
Rubber Insulation and Rubber Sheathed Application Range Heavy duty flexible cables for medium mechanical stress For dry and wet applications Can be used for domestic electric tools According to HD 516
More informationEXTREMELY LOW MAGNETIC FIELD (ELMF) XLPE INSULATED CABLES, TYPE N2XY/FR1 0.6/1 KV
CABLE DESCRIPTION Single- or multi-phase electric cable for creating a weak external magnetic field,so as to obtain a cable wherein at last one of the conductors is assembled from two or more insulated
More information14 AWG 2 AWG: 600 Volt
INDUSTRIAL AUTOMATION & PROCESS CONTROL CABLES 18.70 600V Type MC Metal Clad and Teck-Style Cables Overview Metal Clad Interlocked PVC Outer Jacket Teck-Style PVC Outer Jacket Introduction Polyester Wrap
More informationTHE PATHWAY TO POWER HIGH-VOLTAGE CABLES
THE PATHWAY TO POWER HIGH-VOLTAGE CABLES TABLE OF CONTENTS HIGH-VOLTAGE CABLES 3 Advantages of XLPE-insulated cable systems 3 PROPOSAL 4 Cable systems 4 Providing System Solutions 4 Continuous temperature
More informationPower Cables and their Application
Power Cables and their Application Parti Materials Construction Criteria for Selection Project Planning Laying and Installation Accessories Measuring and Testing Editor: Lothar Heinhold 3rd revised edition,
More informationPhoto: HELUKABEL. Motor, Servo & Feedback Cables D 1
Photo: HELUKABEL Motor, Servo & Feedback Cables D Motor, Servo & Feedback Cables A multitude of applications requires the construction of many special cables. Corresponding to the customers requirements,
More informationFor information transmission at dry and moist production sites, in and under plaster, outdoors for fixed installation.
Telecommunication and fire alarm cables For information transmission at dry and moist production sites, in and under plaster, outdoors for fixed installation. J-YY Bd 14 J-YY BMK 15 J-Y(St)Y Lg 16 J-Y(St)Y
More informationHYDROFIRM(T) EMV-FC S1BC4BF KTW/W270 Drinking Water Application, shielded version ENERGY. Exclusive Authorised UK Distributor
HYDROFIRM(T) EMV-FC S1BC4BF KTW/W270 Drinking Water Application, shielded version ENERGY Exclusive Authorised UK Distributor Technical Data Trademark Type designation Specification Application HYDROFIRM(T)
More informationMotor, Servo & Feedback Cables
Photo: HELUKABEL Motor, Servo & Feedback Cables D Motor, Servo & Feedback Cables A multitude of applications requires the construction of many special cables. Corresponding to the customers requirements,
More informationGeneral Technical Specification and Execution Procedures for Transmission and Subtransmission Networks Cables
Islamic Republic of Iran Vice Presidency for Strategic Planning and Supervision General Technical Specification and Execution Procedures for Transmission and Subtransmission Networks Cables NO: 452-1 Office
More informationUnderground System Design TADP 547
Underground System Design TADP 547 Industry Standards, Specifications and Guides Presentation 6.4 Instructor: Frank Frentzas Industry Organizations Several professional organizations develop standards
More informationSUBMERSIBLE PUMP CABLES
12 SUBMERSIBLE PUMP CABLES 1-450 / 750 V Termoplastic rubber, round orflat flexibe cable ACCORDING TO NF C -102 HD 22.4 S2 Water absorption tests: IEC 811.1.3 VDE 0472 Teil 2 NF C -026 HD 505-1-3 s1 Maximum
More information11-SDMS-03 REV. 02 SPECIFICATIONS FOR
11-SDMS-03 REV. 02 SPECIFICATIONS FOR XLPE INSULATED POWER CABLES FOR RATED VOLTAGES FROM 15 KV UP TO 36 KV (U m ) This specification is property of SEC and subject to change or modification without notice
More informationINSTRUCTIONS FOR THE SAFE APPLICATION OF CABLES
THE SAFE APPLICATIO OF CABLES The cables manufactured by S are only appropriate for the transmission of electric energy for supply and signalling purposes. First of all the valid construction and installation
More informationP Low Voltage Catalogue Cables Australia Powering your Project
P +61 8 9367 8978 Low Voltage Catalogue Cables Australia Powering your Project CABLES AUSTRALIA PTY LTD LOW VOLTAGE CATALOGUE ABOUT US Cables Australia is a locally owned and operated distributor of high
More informationENERGY CORDAFLEX (SMK) (N)SHTOEU Low Voltage Reeling Cable
ENERGY (N)SHTOEU Low Voltage Reeling Cable Technical Data Type Type designation Approvals/standards Application (N)SHTOEU-J/-O DIN VDE 0250, Part 814; VDE-Reg.-Nr. 7519; GOST R Flexible reeling cable for
More informationFault location on power cables. Fault location on power cables
Fault location on power cables Fault location on power cables Contents: 1. Introduction 2. Construction of power cables 3. Cable faults 1. Introduction Fault location on communication and power cables
More informationREPORT OF PERFORMANCE TIC
REPORT OF PERFORMANCE TIC 1580-13 OBJECT TYPE Three-core power cable 18/30(36) kv, 3x500 mm2, 2XWY(P)-FR XLPE Rated voltage, U 0/U (U m) 18/30 (36) kv Conductor material Cu Conductor cross-section 3x500
More informationStandard Technical Specifications for Electrical Works CABLES AND ACCESSORIES. 11 kv XLPE-Insulated Three-Core Underground Cables
Standard Technical Specifications for Electrical Works CABLES AND ACCESSORIES ( Data Sheets ) 11 kv XLPE-Insulated Three-Core Underground Cables (3x240 mm 2 ) ADWEA/ADDC/AADC STANDARD : D-AAA-CAB-11-3Cx240
More informationData sheet. Connection line M12 plug straight - M12 jack straight drag chain suitable, 8-pole, X-coded 2.0 m. Illustrations
Page 1/7 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection cable drag chain suitable Cat.6A, 8 pole, X-coded
More informationIndustrial Ethernet OPT cable manufactured for Petrol Forecourt Applications.
Industrial Ethernet Petrol Forecourt Cable (Solid) 3014P24S1001 Industrial Ethernet Petrol Forecourt Cable (Solid) 3014P24S1001-10 Industrial Ethernet OPT cable manufactured for Petrol Forecourt Applications.
More informationRAXLINE TPE TOP FLEXDESIGN TPE CABLES UP TO 10 MILLION MOTION CYCLES UP TO 1000 M TRAVEL LENGTH DOWN TO 5 Ø
RAXLINE TPE TOP FLEXDESIGN TPE CABLES UP TO 10 MILLION MOTION CYCLES UP TO 1000 M TRAVEL LENGTH DOWN TO 5 Ø Automated Stacking Cranes (ASC) Ship To Shore Container Cranes (STS) Rubber Tyre Gantry (RTG)
More informationMEDIUM VOLTAGE TERMINATIONS CATALOGUE 2017
MEDIUM VOLTAGE TERMINATIONS CATALOGUE 01 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More informationa Nexans company Catalogue 2009
a Nexans company Catalogue 009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage
More informationa Nexans company Catalogue 2012
a Nexans company Catalogue 0 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable
More informationVSD CABLES. KSXCY Series MDXCY Series HDXCY Series FDXCY Series P: (09)
KSXCY Series... 72 MDXCY Series... 73 HDXCY Series... 74 FDXCY Series... 76 P: (09) 264 1000 www.firstflex.co.nz KSXCY High Performance Fixed Copper Tape VSD Cable Flexible Conductors for Fixed Applications
More informationNexans Network Solutions Div. Euromold
Catalogue 0 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for
More informationa Nexans company Catalogue 2012
a Nexans company Catalogue 0 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable
More informationLV AIRGUARD. P r o ble m. ife? No S. a proven, rugged product for harsh environments
ife? No S n K P r o ble m! No? aw a proven, rugged product for harsh environments No LV AIRGUARD LV AIRGUARD Low Voltage Cables for Harsh Environments FEATURES - No Knife? No Saw? No Problem! installation
More informationAddison Medium Voltage Cables
Addison Medium Voltage Cables www.addison-cables.com www.addison-tech.com 1 Caledonian Medium Voltage Cables(ICEA) Company Profile Caledonian. established in 1978.offers one of the most complete lines
More informationMV Power Cable Testing Training
MV Power Cable Testing Training Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq Since power cables are used
More informationUNCONTROLLED 3 STANDARD PROCEDURES FOR PREPARING 33KV CABLES
3 STANDARD PROCEDURES FOR PREPARING 33KV CABLES 3.1 Single-Core Copper Wire Screened Polymeric Cables 3.1.1 Removing the Outer Sheath Clean and abrade the outer sheath with an approved abrasive paper for
More informationCUSTOM DESIGN COAXIAL CABLES BY SICAB
CUSTOM DESIGN COAXIAL CABLES BY SICAB. COAX RG 58 C/U Application: Coaxial Cable 50 Ohm For indoor installation as well as in industrial areas in conduits and cable ducts, for transmission of high frequency
More informationMV water-proof and water tree retardant power cable
MV water-proof and water tree retardant power cable 1 Standard GB/T16-8 1kV 35kV, IEC The products should be manufactured according to standard GB/T16-8 and also as per IEC, BS and HD as requested. 2 Application
More informationK20 & L120 LSZH Armoured F/FTP Cat6 Cables
K20 & L120 LSZH Armoured F/FTP Cat6 Cables The cables are designed for high speed data transmissions, and are suitable for installations in cable trays or on hooks. RATP CAT6-K20 (for K20 cable) FRANCE
More informationEC 200 CHARACTERISTICS D A T A S H E E T. Kabelwerk EUPEN AG cable. M e c h a n i c a l c h a r a c t e r i s t i c s
EC 200 EC200 - Rev. 3-23.06.11 Characteristic impedance 50 ± 2 Material copper wire Nominal capacity (pf/m) 80.5 Construction - Relative propagation velocity (%) 83 Diameter (mm) 1.05 Inductance (µh/m)
More informationJULY Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
More informationCIR (Crush & Impact Resistant) VFD Power Cable
37-2 CIRVFD CIR (Crush & Impact Resistant) VFD Power Cable Gexol Insulated Three Conductor 2kV Rated 90 C UL Listed as Type TC-ER Power Conductors (x3) Soft annealed flexible stranded tinned copper per
More informationTable of contents. Phone: Fax:
HELUKABEL GmbH Dieselstrasse 7 Hemmingen GERMANY Tel. +9 (0)750 9090 Fax.+9.(0)750.7 www.helukabel.de info@helukabel.de Created at 03/3/0 by Phone: Fax: EMail: Table of contents Page : Page 5 from. CABLES,
More informationAddison. Profibus SK Indoor + Outdoor BUS CABLE. Application: Construction:
Addison www.addison-tech.com www.addison-cables.com Profibus SK Indoor + Outdoor Application: The application of these Profibus SK cables are in the cell and field area, just as for conventional types.
More informationTPE-INSULATED CABLES TPE-INSULATED CABLES. Products. TPE - Cables HEW-KABEL/CDT
TPE-INSULATED CABLES Products TPE - Cables TPE-INSULATED CABLES 105 C O N T E N T S C O N T E N T S Page TPE single cores according to DIN 72551, type A 107 TPE single cores according to DIN 72551, type
More informationCaledonian. Profibus L2 Indoor BUS CABLE. Application: Construction:
Caledonian www.caledonian-cables.co.uk www.caledonian-cables.net Profibus L2 Indoor Application: This system cable is used to interconnect L2-BUS components. This cable is an economical solution for the
More informationKerman & Kavian Cable Industries ( KCI )
KCI Kerman & Kavian Cable Industries ( KCI ) KCI Cables for control and instrumentation circuits 150/250 V (300 V) According to of IEC 60092-376 (2003) Electrical installations in ships - Part 376: Kerman
More information600 Volt MULTICONDUCTOR XLPE MC Low Voltage Commercial & Industrial Cables
Applications Multiconductor cable with stranded copper conductors, extruded high dielectric strength cross-linked polyethylene (XLPE) insulation, Type XHHW-2, cabled with bare copper grounding conductors
More informationPremoulded cable joint SMPGB
Premoulded cable joint SMPGB 362-420 Premoulded for safe and easy installation Active pressure Reliable Joint bodies routinetested according to IEC before delivery Bolt connector technology Compact joint
More informationInnovative Eldra Solar Cabling System SOLINQ total system for solar cabling Sustainability
Introduction Innovative Eldra Solar Cabling System Eldra is an innovative company of international standing. A fast growing, ambitious business offering a broad range of high quality products and with
More informationOFFSHORE CABLES GENERAL CATALOGUE. Offshore Cables. technergy INTEGRATED CABLING SOLUTIONS
OFFSHORE CABLES GENERAL CATALOGUE Offshore Cables technergy INTEGRATED CABLING SOLUTIONS TM 1 TEOF Offshore Cables INTEGRATED CABLING SOLUTIONS TM technergy Introduction Every offshore platform requires
More informationSPECIFICATION SS-140/9. 0.6/1 (1.2) kv CONTROL AND POWER UNDERGROUND CABLES WITH PVC OR XLPE INSULATION AND PVC JACKET
INDEPENDENT POWER TRANSMISSION OPERATOR S.A. TNPRD/ SUBSTATION SPECIFICATION & EQUIPMENT SECTION December 2016 SPECIFICATION 0.6/1 (1.2) kv CONTROL AND POWER UNDERGROUND CABLES WITH PVC OR XLPE INSULATION
More informationDOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES
DOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES DOWNSTREAM FACILITY CABLES El Dorado, Arkansas Made in America CIR (Crush & Impact Resistant) CIR is a next-generation cable designed to replace older-technology
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More information76 / 132 (145) kv 1x1200 mm 2 CU/XLPE/CWS/AL/HDPE
09-1026 TYPE TEST CERTIFICATE OF COMPLETE TYPE TEST OBJECT single-core power cable TYPE 76 / 132 (145) kv 1x1200 mm 2 CU/XLPE/CWS/AL/HDPE Rated voltage, U o /U (U m ) 76/132 (145) kv Conductor material
More informationContent HYBRID AND SPECIAL CABLES G 1. for the application on marine engines... page. : especially for use in rail vehicles. ❿! Applications...
Content page ❿! Applications... /2 ❿! Construction examples of special cables... /3-6 ❿! S 670 PUR hybrid field bus control cable, suitable for cable tracks UL/CSA... /7 ❿! S 671 PVC hybrid field bus control
More informationCABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES
CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES FOR CABLE CARRIERS EDITION 09-2012 Durable, reliable, cost-effective
More informationCLEAN ENERGY Wind energy cables
CLEAN ENERGY Wind energy cables 1 Table of Contents TELE-FONIKA KABLE 4 PRODUCTION POTENTIAL 5 CLEAN ENERGY 6 DESCRIPTION OF PICTOGRAMS USED IN CATALOGUE 7 MEDIUM VOLTAGE CABLES 8 MEDIUM VOLTAGE XLPE POWER
More informationInstrumentation Cables
around a world of cables UL INSTRUMENTATION CABLES UL THHN CABLES UL THWN CABLES Instrumentation Cables INDEX Introduction Specialty Cables 300V & 00V Instrumentation Cable Types Certificates and Standards
More informationkv: medium voltage reeling cable with fibreoptics
PROTOLO(SMK)-LWL ()TSKCGEWOEU 3,6/6 kv: medium voltage reeling cable with fibre-optics Application Flexible medium voltage reeling cable with integrated fibre-optics for the combined transmission of energy
More informationMGVCL/MM/ /2082/11KV AB CABLE TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES
TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES 1. Qualifying Requirement of AB Cable Manufacture/Supplier The manufacturer should have manufactured, successfully type tested
More informationTwenCombi Cat-5E FTP(3x) - Coax 9 - EIBA - tube PE 5 mm
name: TKF article number: 10305 description Nr.: POE- PS- 10305 PT F F F 800 B C 1 2 3 4 5 6 7 Assembly: 1. Primary tube 5 mm 2. CAT 5 E FTP cable 3. CAT 5 E FTP cable 4. Bus cable 5. Coax 9 cable 6. Separation
More informationABOUT US ABOUT US 1 CRANE CABLES
ABOUT US ABOUT US ÜNTEL KABLO, one of the leading cable manufacturers of Europe was established in 1972, Turkey. With almost 45 years of experience, it has been continuously developing and optimizing its
More informationconductor Extruded Cross - Linked Polyethylene Insulated (XLPE) Power Cable Rated Voltage U 0 /U = 12/20 kv U 0 /U = 18/30 kv
Israel Electric Corporation Ltd. - Customer Division - National Network Unit Issued date: February 2018 THE ISRAEL ELECTRIC CORPORATION LTD. National Network Unit Specification No. NPS - 361 for Single
More informationHYDROFIRM (T) Cables. for use in Ground Water and Drinking Water
HYDROFIRM (T) Cables for use in Ground Water and Drinking Water Finely stranded copper conductor EPR insulation Special synthetic rubber sheath Until now, the renowned HYDROFIRM TGK cables were available
More information1.1_KV PVC insulated PVC sheathed multicore Aluminium Cable (armoured & unarmoured)
WEST BENGAL STATE ELECTRICITY DISTRIBUTION COMPANY LIMITED (A Govt. of West Bengal Enterprise) Office of the Chief Engineer, Procurement & Contracts Department Vidyut Bhavan, 4 th. floor, Bidhannagar,
More informationSANS 1339:2010 Electric cables Cross-linked polyethylene (XLPE) insulated cables for rated voltages 3,8/6,6 kv to 19/33 kv
DRAFT SOUTH AFRICAN STANDARD (DSS): PUBLIC ENQUIRY STAGE Document number: 66/1339/4 Reference: SANS 1339 Date of circulation: 2009-12-08 Closing date: 2010-02-08 Number and title: SANS 1339:2010 Electric
More informationNETWORK CONNECTIVITY SYSTEMS
NETWORK CONNECTIVITY SYSTEMS Installation Cable KS-STP Category 7 Installation Cable Certificates 10GBaseT FTP Category 6 Installation Cable UTP Category 6 Installation Cable UTP Category 5E Installation
More informationData sheet MC GC1200 pro22 Cat.7A S/FTP 4P LSHF-FR, class Dca s2 d2
Page 1/7 Illustrations Principle diagram See enlarged drawings at the end of document Product specification 10 GBit installation cable, simplex installation cable Cat.7A AWG 22 S/FTP with wires shielded
More informationConnection technology for wireless communication systems
Connection technology for wireless communication systems Rosenberger Rosenberger, founded in 1958, is a family owned company and ranks today among the top global manufacturers of high-frequency coaxial
More informationData sheet MC GC1000 pro23 Cat.7 S/FTP 4P LSHF-FR 1640 ft
Page 1/6 MC GC0 pro23 Cat.7 S/FTP 4P LSHF-FR 1640 ft 18427034141 Illustrations Principle diagram Product specification 10 GBit installation cable, simplex installation cable Cat.7 AWG 23 S/FTP with wires
More information2. CONDUCTORS. 2.1 Strand Types. 2.2 Coatings Tensile Strength of Copper Wire Copper Strand Properties. 2.5 Aluminum Strand Properties
2. CONDUCTORS 2.1 Strand Types 2.1.1 Concentric Strand 7 2.1.2 Bunch Strand 7 2.1.3 Rope Strand 8 2.1.4 Sector Conductor 8 2.1.5 Segmental Conductor 8 2.1.6 Annular Conductor 8 2.1.7 Compact Strand 8 2.1.8
More informationAll the standards referred to the most current issue, including all amendment supplements. as of the date of the bid.
1. Scope This specification defines the methods, the procedures and the requirements to verify the cables manufactured according to I.E.C. Specifications NPS361. 2. Standards All the standards referred
More informationMEDIUM VOLTAGE TERMINATIONS CATALOGUE 2017
MEDIUM VOLTAGE TERMINATIONS CATALOGUE 01 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More informationTRAXLINE CABLES FOR MOTION
TRAXLINE CABLES FOR MOTION CONTINUOUS BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS TRAXLINE PRE-ASSEMBLED CABLES FOR CABLE CARRIERS EDITION 5-2016 Cost-effective, reliable, durable cables
More informationLow Voltage AIRGUARD. A proven, rugged product for harsh environments
Low Voltage AIRGUARD A proven, rugged product for harsh environments Linking the future As the worldwide leader in the cable industry, Prysmian Group believes in the effective, efficient and sustainable
More informationCOMMON WORK RESULTS FOR INTEGRATED AUTOMATION DESIGN AND CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationData sheet Connection line M12 jack straight - RJ45 plug straight 4-pole, D-coded 2.0 m
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12-jack to RJ45-plug Ethernet connection line Cat.5, 4-pole, D-coded (IEC
More informationCOPPER + LWL RAW CABLES
COPPER + LWL RAW Twisted Pair Cables... 112 TV/SAT Cables... 116 Fiber Optic Raw Cables... 120 DIGITUS CAT 7 twisted pair installation cable 4x2xAWG23 S-FTP CAT 7 1000 MHz LSZH installation cable For installation
More informationEXCELLENT ELECTRICAL PERFORMANCES
50OHMS CORRUGATED COPPER TUBE COAXIAL CABLE PRODUCT INTRODUCTION 2 Hansen's manufacturing of wide-scope 50ohms corrugated copper coaxial Cable is the fruitful result of the engineers' diligent research
More informationCables for Data Transmission in Industrial Automation. Fieldbus Cables Copper Cables Fibre Optic Cables
Cables for Data Transmission in Industrial Automation Fieldbus Cables Copper Cables Fibre Optic Cables 2 KERPEN GmbH & Co. KG 2005 2.2006 Printing errors excepted. Subject to alteration. Contents Seite
More informationTratos High Voltage cables
March 2013 Tratos High Voltage cables Cables for a moving world www.tratos.eu Introduction High Voltage Cables Tratos is an international manufacturer and supplier of High & Extra High Voltage cable up
More informationHigh Temperature Flexible Control Cable
High Temperature Flexible Control Cable 0 High Temperature Flexible Control Cable SILFLEX UL/CSA UL/CSA/CE 0 High Temperature Silicone Control Cable with UL/CSA SILFLEX SiHF CE 0 High Temperature Silicone
More informationSample Specification Electrical Heat Tracing Cables Metric Units
Sample Specification Electrical Heat Tracing Cables Metric Units January 2008 ELECTRIC HEAT TRACING CABLES SPECIFICATION TABLE OF CONTENTS PAGE 1.0 HEATER CABLES... 3 1.1 SELF-REGULATING... 3 1.2 FLEXIBLE
More informationINTRODUCTION NUHAS OMAN QUALITY & RELIABILITY.
INTRODUCTION Nuhas Oman LLC, an integral part of The Al Bahja Group of Companies, is a Quality producer of: HV, MV and LV Cables Enamelled Copper Wires Oxygen Free Continuous Cast Copper Wire Rods Drawn
More informationVFD CABLES 100% EMI CONTAINMENT FOR INDUSTRIAL APPLICATIONS
VFD CABLES 100% EMI CONTAINMENT FOR INDUSTRIAL APPLICATIONS INDUSTRIAL VFD CABLES Index n Variable Frequency Drive (VFD) Power Cables Extra Flexible VFD Power Cable............... 2-3 Crush & Impact Resistant
More informationTECHNICAL SPECIFICATION FOR 11KV, 3C x95mm mm 2 AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED)
TECHNICAL SPECIFICATION FOR 11KV, 3C x95mm 2 + 80mm 2 AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of, 3C x95mm 2 +
More informationTRANSMISSION ENGINEERING STANDARD TES-P , Rev. 0 TABLE OF CONTENTS 1.0 SCOPE 2.0 BONDING METHODS
1.0 SCOPE 2.0 BONDING METHODS 2.1 Introduction 2.2 Design 2.3 Single-Point Bonding 2.4 Cross Bonding 2.5 Sheath Sectionalizing Joints 2.6 Sheath Standing Voltage 2.7 Sheath Voltage at Through Fault 2.8
More informationServo Cable Selection
Servo Cables Servo Cable Selection Chainflex cable Jacket Shield Class Bending radius moving (factor x d) Temperature moving from/to F ( C) Oil-resistant V max. ft/s (m/s) unsupported V max. ft/s (m/s)
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 177 2012 Specification for Braided 75 Ω, Mini-Series Quad Shield Coaxial Cable for CMTS and SDI cables NOTICE
More informationSLEEVING (CONVOLUTED) SLEEVING (SPLIT CONVOLUTED) SLEEVING (PVC) 56 AUTO MARINE PRODUCT CATALOGUE 2018/19 VISIT:
SLEEVING (CONVOLUTED) Halogen-free nylon convoluted sleeving suitable for bundling of wires and protection against abrasion. Continuous operating temperature -40ºC to 5ºC with short excursions up to 150ºC.
More informationDOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES
DOWNSTREAM POWER, CONTROL & INSTRUMENTATION CABLES DOWNSTREAM FACILITY CABLES Made in America CIR (Crush & Impact Resistant) CIR is a next-generation cable designed to replace older-technology cables like
More informationXLPE CABLE (33KV) September Engineering Department WEST BENGAL STATE ELECTRICITY TRANSMISSION COMPANY LIMITED
XLPE CABLE (33KV) September 2017 Engineering Department WEST BENGAL STATE ELECTRICITY TRANSMISSION COMPANY LIMITED Regd. Office: VidyutBhawan, Block DJ, Sector-II, Bidhannagar, Kolkata 700091. CIN: U40101WB2007SGC113474;
More informationUNIRAIL D RS485 and BUS cables
UNIRAIL D RS485 and BUS cables Type: 1x2x22 AWG/7 + 1x22 AWG/7 (1x2x0,35 + 1x0,35) Code: RW103A stranded tinned copper wire 22 AWG/7 (0,35 mm²) white blue POWER ELEMENTS: stranded bare copper wire 22 AWG/7
More informationHeat-Shrinkable Tubing
HS Series 3:1 Shrink Ratio Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced Withstands severe mechanical requirements
More informationArmoured Instrumentation Cables to BS6883
Armoured Instrumentation Cables to BS Low Smoke Zero Halogen Pairs/Triples - Collectively Screened. TAC, EPR, SCRN, SW, GSWB, SW 0/0V Application Armoured control and instrumentation cables for fixed wiring
More informationSignal converter for electromagnetic flowmeters
Quick Start Signal converter for electromagnetic flowmeters Electronic revision: ER 3.0.xx The documentation is only complete when used in combination with the relevant documentation for the flow sensor.
More information5-46kV 3/C TRXLPE ARMORTEK Medium Voltage Commercial & Industrial Cables
5-46kV 3/C TRXLPE ARMORTEK Medium Voltage Commercial & Industrial Cables Applications Three copper conductors cable, each with a semiconducting conductor shield, high dielectric strength VOLTALENE TRXLPE
More informationEdition January 2008
Edition January 2008 New eupen corrugated aluminium cables INTRODUCTION EUPEN extends its cable product range with two specifically designed foam dielectric corrugated aluminum cables EA5-50 7/8 and EA7-50
More informationAEE. Canada. Australia
DMARCA DE CONFORMIDA CORDS & ELECTRICAL UNIVERSAL POWER JUMPER CORD INTERNATIONAL AGENCIES APPROVED 302 POWER JUMPER CORD APPLICATIONS: To Connect Accessories and Peripherals to Computers and Electronic
More informationProduct information. Marine, Oil & Gas.
Product information Marine, Oil & Gas www.drakamog.com DRAKA Product information MOG 2010 Draka ShipLine range; the choice for reliability and flexibility For more than 100 years, Draka has met and exceeded
More informationINDEX OF REVISIONS DESCRIPTION AND/OR AFFECTED SHEETS
E&P Pag. 1 / 14 Pre-salt Standard Steel Tube Umbilical Types Umbilical Electrical Cable Element DPT-SUB/ES/DCT INDEX OF REVISIONS REV DESCRIPTION AND/OR AFFECTED SHEETS 0 Original ORIGINAL REV. A REV.
More information