ÖLFLEX FORTIS 55 Highly Flexible and Extremely Oil-Resistant Tray Cable; -40 C Flexible/-55 C Stationary

Transcription

1 TRAY-RATED CABLE Quick Select Chart 48 TC 600/TC 600 S 50 Flexible Tray Cable with TC-ER for Easier Installations; Unshielded & Shielded TRAY II/TRAY II CY 52 Extremely Oil-Resistant & Flexible Tray Cable with UL & CSA; Unshielded & Shielded AUTO-I 54 Heavy Duty, Flexible Tray Cable with Colored for DC or AC Control Wiring FORTIS 55 Highly Flexible and Extremely Oil-Resistant Tray Cable; -40 C Flexible/-55 C Stationary I V PLTC ITC Instrumentation Cable with Individually Shielded Pairs/Triads; Overall Shield in Other Catalog Sections CONTROL TM/TM CY 30 POWER MULTI 36 FD AUTO-X 75 VFD SLIM 96 VFD XL 97 VFD with Signal 98 V FD VFD 100 SDP TC

2 Quick Select Chart Product AWG Range Conductor Counts* Stranding TC AWG 2, 3, 4, 5, 7, 9, 12, 16, 19, 25 Class B stranded wire TC 600 S AWG 2, 3, 4, 5, 7, 9, 12, 16, 19, 25 Class B stranded wire TRAY II 18 AWG KCMIL 2, 3, 4, 5, 7, 8, 9, 12, 16, 18, 25, 41, 50, 61 Class 5 / Class K fine wire TRAY II CY 18 AWG - 2 AWG 2, 3, 4, 5, 7, 12,18, 25 Class 5 / Class K fine wire AUTO-I AWG 3, 5, 7, 11, 12, 19, 25, 33, 42, 49, 65 Class K fine wire FORTIS 18-2 AWG 3, 4, 5, 7, 9, 12, 16, 18, 25 Class 5 / Class K fine wire I AWG Pairs: 1, 2, 3, 4, 6, 8, 12, 16, 24 Triads: 1, 2, 4, 6, 8, 12 Class B stranded wire CONTROL TM AWG 3, 4, 5, 6, 7, 9, 10, 12, 15, 19, 20, 25 Class 5 fine wire CONTROL TM CY AWG 3, 4, 5, 6, 7, 9, 10, 12, 15, 19, 20, 25 Class 5 fine wire POWER MULTI 18-8 AWG 3, 4, 5, 7, 12, 18, 25 Class 5 fine wire UNITRONIC 300/300 S AWG 2, 3, 4, 6, 8, 10, 15, 20, 25, 30, 40, 50 Class 5 fine wire FD AUTO-X AWG 3, 5, 7, 11, 12, 19, 25, 33, 42, 49, 55 Class M stranding VFD SLIM 18-2 AWG 4 Class 5 fine wire VFD XL 16-2 AWG 4 Class 5 / Class K fine wire VFD with Signal 16-4 AWG 4 conductors + 1 pair Class 5 fine wire V AWG KCMIL 3 conductors + 3 symmetrical grounds Class B stranded wire VFD FD AWG 4 Class 6 super fine wire SDP TC 14-2 AWG 4 Class 5 fine wire * Other conductor counts are available upon request

3 Shield Jacket Low Temp High Temp Wet Rating Oil Flame Mechanical Page No Yes No Yes No No Specially formulated PVC Specially formulated PVC Specially formulated thermoplastic polymer Specially formulated thermoplastic polymer Specially formulated thermoplastic polymer Specially formulated PVC -40 C 90 C 75 C C 90 C 75 C C 90 C 75 C C 90 C 75 C C 90 C 75 C C 105 C 75 C 55 Yes PVC -30 C 105 C 57 No PVC -40 C 90 C 75 C 30 Yes PVC -40 C 90 C 75 C 30 No Elastomeric alloy -40 C 90 C 75 C 36 Yes & No PVC -25 C 90 C 75 C 208 No TPE -25 C 90 C 75 C 75 Yes PVC -25 C 90 C 75 C 96 Yes PVC -25 C 90 C 90 C 97 Yes TPE -25 C 105 C 75 C 98 Yes PVC -25 C 90 C 90 C 99 Yes TPE -25 C 105 C 75 C 100 No TPE -40 C 105 C 75 C 101 Rating Cable Attributes, see page 659 Oil Resistance Flame Resistance Mechanical Properties Ultimate OR-05 FR-05 MP-05 Excellent OR-04 FR-04 MP-04 Superior OR-03 FR-03 MP-03 Above Average OR-02 FR-02 MP-02 Average OR-01 FR-01 MP

4 Flexible Tray-Rated Control Cable Cable TC 600/600 S Flexible Tray Cable with TC-ER for Easier Installations; Unshielded & Shielded Sub Header LAPP KABEL TC 600 Unshielded Construction : Finely stranded bare copper Insulation: Specially blended PVC/nylon Jacket: Specially formulated PVC; black LAPP KABEL TC 600 S TC 600 is a multi-conductor cable approved for use in cable trays. It is UL TC-ER & CSA CIC approved, making it perfect for new plant installations and factory expansions. TC 600 S has an overall foil tape and drain wire for EMI & RFI protection. Recommended Applications Plant expansion; contractor markets; A&E firm plant designs; tray wiring; anywhere VNTC cables are used Approvals Shielded Construction : Finely stranded bare copper Insulation: Specially blended PVC/nylon Shielding: Foil tape (100% coverage); drain wire Jacket: Specially formulated PVC; black Application Advantage Easier to pull than standard tray cable UL TC-ER approval to reduce material costs; no conduit is needed Black numbered conductors with printed color code for easy identification UV-resistant and direct burial UL wet rating 75 C Cable Attributes, see page 659 OR-01 FR-03 FL-01 MP-03 OIL FLAME MOTION MECHANICAL Similar Cables TRAY II/TRAY II CY CONTROL TM/ CONTROL TM CY Complete the Installation Strain Relief: page 502 EPIC Connectors: page 278 Technical Data Minimum Bend Radius: - for installation: 4 x cable diameter - shielded: 6 x cable diameter Temperature Range: - UL TC/CSA CIC: -40 C to +90 C - for flexible use: -5 C to +90 C - for stationary use: -40 C to +105 C Nominal Voltage: - UL TC/CSA CIC: 600V - UL WTTC: 1000V Test Voltage: Conductor Stranding: 2000V Class B stranded wire Approvals: UL: TC-ER per UL 1277 MTW per UL 1063 (14 AWG and larger) WTTC per UL 2277 B us Drop Cable (14 AWG and larger, 3c & 4c) AWM Attributes: 75 C Wet; 90 C Dry Sunlight Resistant Direct Burial NFPA Bus Drop Approval NEC: Class 1 Division 2 per NEC Article 501 Canada: c(ul) CIC FT4 cru AWM I/II A/B FT4 Additional: CE & RoHS Color Code: Black with white numbers and color name per color chart ICEA-NEMA (K-2): Chart 10, page 698, plus green/yellow ground VNTC is a registered trademark of General Cable. Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values

5 TC 600 of 18 AWG (7 strand) * S S S S S S S S S AWG (7 strand) * S S S S S S S S S S S S AWG (19 strand) * S ** S ** S S S S S S2129 * 2c cable does not include ER and green/yellow ground ** UL Bus Drop Approval of 12 AWG (19 strand) * S ** S ** S S S S S S S S AWG (19 strand) * S ** S ** S S S AWG (19 strand) ** S AWG (19 strand) ** S AWG (19 strand) ** S2136 TC 600 S of 18 AWG (7 strand) S* S S S S S S S S S S S S S S S S S AWG (7 strand) S* S S S S S S S S S S S S S S S S S S S2129 * 2c cable does not include ER and green/yellow ground ** UL Bus Drop Approval of 14 AWG (19 strand) S* S S** S S** S S S S S S S S S S S S S AWG (19 strand) S* S S** S S** S S S S S S S S S S S S S AWG (19 strand) S* S S** S S** S S S S S2121 Recommended assumes minimal OD variance. Additional configurations are available, please see our Section. Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values

6 Flexible Tray-Rated Control Cable Cable TRAY II/TRAY II CY Extremely Oil-Resistant & Flexible Tray Cable with UL & CSA; Unshielded & Shielded Sub Header LAPP KABEL LAPP KABEL Recommended Applications Approvals TRAY II TRAY II CY TRAY II is an industrial grade tray cable with superior oil performance for long cable life. It has a pressure-extruded jacket and fine copper stranding for excellent flexibility, making it much easier to pull through tray. With UL TC-ER approval, no conduit is needed so you can reduce material costs along with saving on labor. TRAY II CY has Lapp s new double laminated foil tape and tinned copper braid shield for improved effectiveness. Industrial plant expansions; automotive plants; tray wiring; anywhere VNTC cables are used Cable Attributes, see page 659 OR-03 FR-03 WT-02 MP-03 OIL FLAME MOTION MECHANICAL Similar Cables CONTROL TM/ CONTROL TM CY TC 600/600 S Unshielded Construction : Finely stranded bare copper Insulation: Specially blended PVC/nylon Jacket: Specially formulated thermoplastic polymer; black Shielded Construction : Finely stranded bare copper Insulation: Specially blended PVC/nylon Shielding: Double laminated foil tape; tinned copper braid (70% coverage) Jacket: Specially formulated thermoplastic polymer; black Application Advantage Oil-resistant pressure-extruded jacket for improved flexibility Easier to pull than standard tray cables, minimizing labor costs UL TC-ER approval to reduce material costs; no conduit is needed Black numbered conductors for easy identification Improved shielding effectiveness Complete the Installation Strain Relief: page 502 EPIC Connectors: page 278 Technical Data Minimum Bend Radius: - for installation: - < 1 AWG: 4 x cable diameter - 1 AWG: 6 x cable diameter - shielded: 6 x cable diameter Temperature Range: - UL/CSA TC: -25 C to +90 C - for stationary use: -40 C to +105 C - for flexible use: -25 C to +105 C Nominal Voltage: - UL/CSA TC: 600V - UL WTTC/CSA AWM: 1000V Test Voltage: 2000V Conductor Stranding: AWG: Class 5 fine wire* AWG: Class K fine wire - 1 AWG KCMIL: Stranded wire * 18 AWG meets only the Class 5 cross section and DC resistance Color Code: Black with white numbers, plus green/yellow ground Approvals: UL: TC-ER per UL 1277 MTW per UL 1063 WTTC per UL 2277 Submersible Pump (14 AWG & larger) PLTC-ER per UL 13 (18-12 AWG) ITC-ER per UL 2250 (18-12 AWG) DP-1 per UL 1690 AWM Attributes: UL Oil Res I/II 75 C Wet; 90 C Dry Sunlight Resistant Direct Burial NFPA NEC: Class 1 Division 2 per NEC Article 501 Canada: c(ul) CIC/TC FT4 CSA AWM I/II A/B FT4 Additional: T orsion Rated for Wind Market (± 90 /m) & (± 150 /m) CE & RoHS MSHA-P07-KA MSHA (shielded only) VNTC is a registered trademark of General Cable. Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values

7 TRAY II of TRAY II CY 18 AWG (1.00 mm 2 ) S S S S S S S S S AWG (1.50 mm 2 ) S S S S S S S S S S S S S S AWG (2.50 mm 2 ) S S S S S S S S AWG (4 mm 2 ) S S S S2121 * MS-M: nickel-plated brass with metric thread. of MS-SC 18 AWG (1.00 mm 2 ) AWG (1.50 mm 2 ) AWG (2.50 mm 2 ) MS-SC with metric thread. of 10 AWG (6 mm 2 ) S S S S AWG (10 mm 2 ) S S AWG (16 mm 2 ) S S S AWG (21 mm 2 ) S S AWG (33.7 mm 2 ) S S AWG (42.3 mm 2 ) S2142 1/0 AWG (52.9 mm 2 ) S2142 2/0 AWG (67.3 mm 2 ) S2148 3/0 AWG (84.8 mm 2 ) S2148 4/0 AWG (106.7 mm 2 ) * 250 KCMIL (128.4 mm 2 ) * 350 KCMIL (181.9 mm 2 ) * 500 KCMIL (257.6 mm 2 ) * of MS-SC 12 AWG (4 mm 2 ) AWG (6 mm 2 ) AWG (10 mm 2 ) AWG (16 mm 2 ) AWG (21 mm 2 ) AWG (33.7 mm 2 ) Recommended assumes minimal OD variance. Additional configurations are available, please see our Section. Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values

8 AUTO-I Heavy Duty, Flexible Tray Cable with Colored for DC or AC Control Wiring LAPP KABEL Recommended Applications Machine tool machinery; food & beverage; processing equipment; automotive and machine wiring for conformance to NFPA Approvals AUTO-I AUTO-I is a UV-resistant, multi-conductor cable designed for use on machine tool equipment and other industrial machinery conforming to NFPA wiring norms. AUTO-I is color-coded with either blue, red, yellow, orange, or black conductors for DC, AC, and other control wiring. Construction : Finely stranded bare copper Insulation: Specially formulated PVC/nylon Jacket: Specially formulated thermoplastic elastomer (TPE); gray Application Advantage UL TC-ER & CSA CIC/TC approval coded for easy wiring with either blue, red, orange, black, or yellow conductors Cable Attributes, see page 659 OR-03 FR-03 FL-02 MP-03 OIL FLAME MOTION MECHANICAL Similar Cables TRAY II CONTROL TM Complete the Installation Strain Relief: page 502 EPIC Connectors: page 278 Technical Data Minimum Bend Radius: 4 x cable diameter Conductor Stranding: Class K fine wire Temperature Range: - UL/CSA TC: -25 C to +90 C - for flexible use: -25 C to +105 C - for stationary use: -40 C to +105 C Nominal Voltage: - UL/CSA TC: 600V - UL WTTC: 1000V Test Voltage: 2000V Color Code: - up to 7c: Colored with black numbers, plus green/yellow ground (Black conductor has white numbers) Color Code: - more than 7c (blue): No. 2 conductor is white/blue stripe - more than 7c: No. 2 conductor is white (red, yellow, or orange) Approvals: UL: TC-ER per UL 1277 WTTC per UL 2277 Attributes: UL Oil Res I 75 C Wet; 90 C Dry Sunlight Resistant Direct Burial NFPA NEC: Class 1 Division 2 per NEC Article 501 Canada: c(ul) CIC/TC FT4 CSA AWM I/II A/B FT4 Additional: CE & RoHS of Recommended assumes minimal OD variance. Additional configurations are available, please see our Section. Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values. of 18 AWG (1.00 mm 2 ) 16 AWG (1.50 mm 2 ) IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S IB S1136 numbers shown are for blue conductors. For other colors, replace the B with an R for red, Y for yellow, O for orange, or BK for black conductors

9 LAPP KABEL FORTIS Highly Flexible and Extremely Oil-Resistant Tray Cable: -40 C Flexible/-55 C Stationary FORTIS FORTIS is named after the Latin word meaning strength. It offers outstanding mechanical performance, particularly at low temperatures. The specially formulated elastomeric jacket passes UL s -40 C cold impact and -55 C cold bend tests. FORTIS also offers outstanding oil resistance (UL Oil Res I/II) and meets all tray cable (UL 1277) and Wind Turbine Tray Cable (UL 2277) requirements. Construction : Finely stranded bare copper Insulation: Specially blended PVC/nylon Jacket: Specially formulated PVC; black Recommended Applications Application Advantage Wind energy; machine tools; forestry equipment; oil & petrochem Arctic-grade jacket passes UL -40 C cold impact test equipment; cold temperature storage & packaging facilities Passes Oil Res I/II requirements Meets all tray cable (UL 1277) requirements Outstanding mechanical toughness: TC-ER rated Meets all Wind Turbine Tray Cable (UL 2277) requirements Meets torsion requirements for wind turbine applications Approvals core is dual-rated for North American and European standards: 18 AWG (1 mm 2 ) to 6 AWG (16 mm 2 ) Cable Attributes, see page 659 OR-03 FR-03 WT-03 MP-04 OIL FLAME MOTION MECHANICAL Similar Cables TRAY II CONTROL TM Complete the Installation Strain Relief: page 502 EPIC Connectors: page 278 Technical Data Minimum Bend Radius: 4 x cable diameter Temperature Range: - UL/CSA TC: -25 C to +90 C - for flexible use: -40 C to +105 C - for stationary use: -55 C to +105 C Nominal Voltage: - UL/CSA TC: 600V - UL WTTC: 1000V Test Voltage: 2000V Conductor Stranding: AWG: Class 5 fine wire* AWG: Class K fine wire * 18 AWG meets only the Class 5 cross section and DC resistance Color Code: Black with white numbers, plus green/yellow ground Approvals: UL: TC-ER per UL 1277 MTW per UL 1063 WTTC per UL 2277 Attributes: UL Oil Res I/II 75 C Wet; 90 C Dry Sunlight Resistant NFPA NEC: Class 1 Division 2 per NEC Article 501 Canada: c(ul) CIC/TC FT4 CSA AWM I/II A/B FT4 Additional: T orsion Rated for Wind Market (± 90 /m) & (± 150 /m) CE & RoHS Recommended assumes minimal OD variance. Additional configurations are available, please see our Section. Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values

10 FORTIS of 18 AWG (1.00 mm 2 ) S S S S S S S S AWG (1.50 mm 2 ) S S S S S S S S S AWG (2.50 mm 2 ) S S S S S S S S2129 of 12 AWG (4 mm 2 ) S S S S AWG (6 mm 2 ) S S S S AWG (10 mm 2 ) S S AWG (16 mm 2 ) S S AWG (21 mm 2 ) S AWG (33.7 mm 2 ) S S2142 Recommended assumes minimal OD variance. Additional configurations are available, please see our Section. Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values

11 I V PLTC ITC Instrumentation Cable with Individually Shielded Pairs/Triads; Overall Shield I 304 The Lapp Group s new I 304 is an instrumentation cable rated for UL CMG, PLTC & ITC and CSA CMG. It is available with individually shielded pairs and triads and has an overall foil shield. Construction : Bare copper Insulation: PVC insulation (cabled pairs or triads); individually foil-shielded pairs or triads with a tinned copper drain wire; orange PVC communication wire* Shield: Overall foil shield with a tinned copper drain wire (100% coverage) Jacket: PVC; black Recommended Applications Petrochem processing; machine control; oil & gas refining; low voltage control wiring Application Advantage UL/CSA rated 300 V Passes UL & CSA Flame Test (70,000 BTU) Sunlight & UV resistant, Direct Burial Rated 105 C Approvals Cable Attributes, see page 659 OR-01 FR-03 FL-01 MP-01 OIL FLAME MOTION MECHANICAL Similar Cables UNITRONIC 300 STP Complete the Installation Strain Relief: page 502 EPIC Connectors: page 278 Technical Data Minimum Bend Radius: 8 x cable diameter Temperature Range: - for stationary use: -30 C to +105 C - for flexible use: -10 C to +105 C Nominal Voltage: Test Voltage: Conductor Stranding: 300V 1500V Class B stranded wire Color Code: - Pairs: Black & white with printed numbers - Triads: Black, white, red with printed numbers Approvals: UL: CMG per UL 444 PLTC per UL 13 ITC per UL 2250 AWM 2464 Attributes: Sunlight Resistant Direct Burial NFPA Canada: CSA CMG FT4 CSA AWM I/II A/B FT4 CSA C22.2 No.214: Communications Cable CSA C22.2 No. 210: Appliance Wiring Material *Not required for single pair/triad construction

12 I 304: Pairs of Pairs 20 AWG S S S S AWG S S S S S S S2129 of Pairs 16 AWG S S S S S S S S S2136 I 304: Triads of Triads 18 AWG S S S S S2121 of Triads 16 AWG S S S S S S