Data sheet C5 RJ45 field plug pro 2P PROFINET
|
|
- Karen Flowers
- 5 years ago
- Views:
Transcription
1 Illustrations Dimensional drawing Page 1/5 See enlarged drawings at the end of document Product specification Cat.5 class D RJ45 plug, 2 pairs, to be assembled in the field fully shielded and multi-port capable straight (180 ) cable feed easy assembly - connection without special tools wire connection: stranded wire AWG 27/7 to 22/7, wire diameter from 0.46 to 0.76 mm wire connection: solid wire AWG 26/1 to 22/1, wire diameter from 0.4 to 0.64 mm transmission characteristics Cat.5 per ISO/IEC Ed.2.2: compliance with class D to ISO/IEC Ed.2.2: , DIN EN : MBit suitable according to IEEE suitable for Power over Ethernet (PoE, PoE plus) degree of protection IP20 for cable jacket diameter from 5.5 to 10.5 mm zinc die-cast housing for industrial use consists of only 2 parts strain relief by latching clip directly on the stuffer cap protected locking hook reconnectable
2 Page 2/5 General Data Fields of application Design Shielding Transmission technology Wiring Color Dimensions Dimension (L x W x H) Dimension (L x W x H) Field assembly ability Multi-port capability Labeling option Structured building cabling, Industrial Ethernet, Office Plugs shielded Copper Profinet metallike x x 9.30 mm 1.96 x 0.54 x 0.37 in. on housing Transmission characteristics Category (ISO) 5 Class (ISO/IEC) Category (TIA) 5 PoE PoE plus D IEEE 802.3af IEEE 802.3at Transmission rate up to 100 MBit (Fast Ethernet) IEEE 802.3u Connections/interfaces Connector technology interface 1 Connector technology interface 2 Number of positions/contacts interface 1 4 Number of positions/contacts interface 2 IDC-connection RJ45 plug 4P/4C Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG Conductor cross section, solid wire Conductor diameter, solid wire (bare copper) Conductor diameter, solid wire (bare copper) mm² mm in.
3 Page 3/5 Connections/interfaces Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG Conductor cross section, stranded wire Conductor diameter, stranded wire (bare copper) Conductor diameter, stranded wire (bare copper) Cable sheath diameter (min. - max.) Cable sheath diameter Cable sheath diameter Cable access/outlet 180 Reconnectibility Shield connection mm² mm in mm in. flexible contact spring Electrical characteristics Current carrying capacity Rated voltage Contact resistance Insulation resistance Dielectric strength conductor-conductor (secondary) max. 1 A max. 50 V max. 20 mohm min. 500 MOhm min V DC Mechanical characteristics Mounting method Insertion and withdrawal force Position/mounting of latch - standard installation position Strain relief snap-in function max. 20 N top latching clip Materials and material properties Material - Housing Material - Contact Material - Contact finish Material - Latch GD-Zn (zinc die-cast) CuSn (tin bronze) Ni + Au (nickel-gold) Plastics
4 Page 4/5 Environmental conditions Temperature (min. - max.) Temperature - Operating C C Temperature - Operating F F Particulate ingress Liquid ingress/immersion Electromagnetic measurement E 2 IP2X IPX0 Approvals RoHS UL listed (file no.) compliant E The product meets the following standards Generic cabling systems General requirements ISO/IEC Ed.2.2: DIN EN : Office buildings ISO/IEC Ed.2.2: DIN EN : Industrial area ISO/IEC DIN EN : Application-specific communications cabling systems Profinet Expansion of Communication Circuit Accessories (DUXR) Category Industrial communication networks - Installation of communication networks in industrial premises] Installation Guideline UL 1863 IEC Classifications ETIM 5.0 EC Packing details Type of packaging Packaging unit - Weight (gram) Packaging unit - Weight (pound) Packaging dimension (W x H x D) Packaging dimension (W x H x D) 10 pc(s) / box g 0.91 lb x x mm 2.28 x 9.72 x 6.34 in.
5 Powered by TCPDF ( Data sheet Illustrations Dimensional drawing Page 5/5
Data sheet. C5 RJ45 field plug pro 2P 360 PROFINET. Illustrations P/N 130E405042PE EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification Cat.5 class D RJ45 plug, 2 pairs, to be assembled in the field fully shielded and multi-port
More informationData sheet C6 A RJ45 field plug pro 360
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
More informationData sheet C6 A RJ45 field plug pro 360
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
More informationData sheet C6 A RJ45 field plug pro
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
More informationData sheet C6 A RJ45 field plug pro 360
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable variable
More informationData sheet E-DAT Industry RJ45 field plug insert Cat.6 Class E A
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 class E A plug to be assembled in the field and mounted in IP67 plug housings of variants
More informationData sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC 11801
More informationOPENETICS. P/N E-DAT Industry RJ45 field plug insert Cat.6A. Specialist Manufacturer Voice Data Security.
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification Cat.6 class E A plug to be assembled in the field and mounted in IP67 plug housings of variants 1, 4,
More informationData sheet. M12 field plug X-coded, straight. Illustrations P/N MNF881A EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification M12 Cat.6A X-coded plug based on IEC PAS 61076-2-109 and suitable for field assembly
More informationData sheet E-DAT Industry RJ45 plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug compliance with class E A to ISO/IEC 11801 Ed.2.2:2011-06,
More informationData sheet Cable connector class F A
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification cable connector for field assembly Class F A for 8 wire cables to connect / extend / repair / relocate
More informationData sheet C6 A modul K 90 jack - keystone style
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: Keystone, 90 cable feed solid,
More informationData sheet. M12 Jack X-coded IP67, field assembly. Illustrations P/N MMF881A315 EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification 8-pole M12 jack for field assembly Cat.6A per IEC/PAS 61076-2-109 suitable for 10 GBit
More informationData sheet C6 A modul K 180 jack - Keystone style
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: Keystone, 180 cable feed solid,
More informationData sheet. E-DAT modul 3 port AP Cat.6A, pure white. Illustrations P/N E EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6A to ISO/IEC
More informationData sheet. E-DAT modul Cat.6A 8(8) jack, T568B. Illustrations P/N I-B1 EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
More informationData sheet E-DAT modul 2 port AP Cat.6 A, pearl white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6 A to ISO/IEC
More informationData sheet Patch cord Cat.6 A AWG m yellow
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification especially suitable for shielded and unshielded class E A systems fully shielded Cat.6 A patch
More informationData sheet Connection line M12 jack straight - RJ45 plug straight 4-pole, D-coded 2.0 m
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12-jack to RJ45-plug Ethernet connection line Cat.5, 4-pole, D-coded (IEC
More informationData sheet. Connection line M12 plug straight - M12 jack straight drag chain suitable, 8-pole, X-coded 2.0 m. Illustrations
Page 1/7 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection cable drag chain suitable Cat.6A, 8 pole, X-coded
More informationData sheet MC GC1200 pro22 Cat.7A S/FTP 4P LSHF-FR, class Dca s2 d2
Page 1/7 Illustrations Principle diagram See enlarged drawings at the end of document Product specification 10 GBit installation cable, simplex installation cable Cat.7A AWG 22 S/FTP with wires shielded
More informationData sheet MC GC1000 pro23 Cat.7 S/FTP 4P LSHF-FR 1640 ft
Page 1/6 MC GC0 pro23 Cat.7 S/FTP 4P LSHF-FR 1640 ft 18427034141 Illustrations Principle diagram Product specification 10 GBit installation cable, simplex installation cable Cat.7 AWG 23 S/FTP with wires
More informationData sheet MC GC1200 pro22 Cat.7A S/FTP 2x4P LSHF-FR 1640 ft
Page 1/7 Illustrations Principle diagram Product specification 10 GBit installation cable, duplex installation cable Cat.7A AWG 22 S/FTP with wires shielded in pairs 2x4 pairs (PiMF) pair shield: plastic
More informationModular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
More informationHARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
More informationOpDAT Universalkabel 1x4 OM4 - biegeunempfindlich, Klasse. Principle diagram
Page 1/9 Illustrations Principle diagram See enlarged drawings at the end of document Product specification installation cable U-DQ(ZN)BH universal fiber optic cable for indoors/outdoors with central or
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More informationData sheet. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationData sheet... W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationData sheet. W-Series WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationData sheet. W-Series WDU 4 BL
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationSIGNAL // POWER // INDUSTRIAL ETHERNET
CIRCULAR CONNECTORS SIGNAL // POWER // INDUSTRIAL ETHERNET 2 HUMMEL smart & reliable HUMMEL AG is a renowned manufacturer of connection technology and components for electric and heating areas. The medium
More informationData sheet. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationPRODUCT INFORMATION UNITRONIC SENSOR SH M12. Info Other types are available at or on request
UNITRONIC SENSOR M12 M12 plug/socket on free conductor end, shielded Sensor/actuator cordset, M12, PUR halogenfree, 3-, 4-, 5-pin. versions, straight and angled M12 plugs and sockets, shielded, A- coded,
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More informationDatenblatt. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationInstall & Go Cat.8 S/FTP Trunk Cable Assembly Description
Description Cat 8 Filler Cat.8.2 S/FTP Horizontal cables (x6) Fan-Out Cables Cat 8 STP Keystones TRUNK CABLE SECTION VIEW Assembly Isometric Front View RiT s Copper Install & Go System provides a pre-terminated
More informationConnector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
More informationDatenblatt. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationSynergy RJ45 LCS 6 Category 6 data outlets
Legrand Electric Ltd. Arena Park - Dial Lane West Bromwich - West Midlands - B70 0EB- United Kingdom Technical enquiries : Tel. 0870 8 90 - Fax. 0870 8 9021 CONTENTS PAGE 7300 56 7300 57 1. Applications...
More informationHigh Speed Interconnects
High Speed Interconnects The Siemon Interconnect Solutions team has developed a full offering of interconnect assemblies for ultra high-speed point-to-point applications. Supporting speeds up to 40Gb/s
More informationData sheet OpDAT connection cable 2x1 OS2 - bend insensitive
Illustrations Principle diagram Page 1/7 Product specification connection cable for direct connector termination with higher robustness cable structure: I-V(ZN)HH2, duplex patch cable with additional outer
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationBroadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
More informationTemposonics GENERATION THE NEW I AM. Magnetostrictive Linear Position Sensors. R-Series V RH EtherNet/IP Data Sheet
Temposonics Magnetostrictive Linear Position Sensors R-Series V RH EtherNet/IP EtherNet/IP with CIP Sync and DLR Position + velocity measurements for up to 0 magnets Field adjustments and diagnostics using
More informationData sheet OpDAT breakout cable 24x1 OM4 - bend insensitive
Page 1/9 Illustrations Principle diagram See enlarged drawings at the end of document Product specification connection cable I-V(ZN)HH breakout cable for direct connector termination for indoors and outdoors
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationSAC-5P- 1,5-PUR/M12FS SH
Extract from the online catalog SAC-5P- 1,5-PUR/M12FS SH Order No.: 1682935 Sensor/Actuator cable, 5-position, PUR, halogen-free, Black-gray RAL 7021, shielded, Free conductor end M12, on Socket, straight
More informationSINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
More informationSpecifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21
M12 A-coding Specifications IEC 60 352-4 Approval A-coding acc. to IEC 61 076-2-101 Circular Connectors Technical characteristics M12 A-coding Type M12 A-coded HARAX M12-L 5 poles HARAX M12 L shielded
More informationSAC-3P- 5,0-PUR/M12FR SH
Extract from the online catalog SAC-3P- 5,0-PUR/M12FR SH Order No.: 1682838 Sensor/Actuator cable, 3-position, PUR, halogen-free, Black-gray RAL 7021, shielded, Free conductor end, on Socket, angled M12,
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More informationAutomation and Network Solutions. Entertainment in Series Round Connectors by HIRSCHMANN.
Automation and Network Solutions Entertainment in Series Round Connectors by HIRSCHMANN. The competition is going to the very ends of the earth. For some time now, the best deals are no longer limited
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More informationThe Amphenol Alden Products Company Industrial Ethernet Family of Products
The Amphenol Alden Products Company Industrial Ethernet Family of Products The AmphenolAlden Products Company Industrial Ethernet Family of Products Ethernet Migrates Out of the Office Environment to the
More informationCOPPER + LWL RAW CABLES
COPPER + LWL RAW Twisted Pair Cables... 112 TV/SAT Cables... 116 Fiber Optic Raw Cables... 120 DIGITUS CAT 7 twisted pair installation cable 4x2xAWG23 S-FTP CAT 7 1000 MHz LSZH installation cable For installation
More informationInformation technology. Generic cabling systems, General requirements
KRAMER WELL CONNECTED WITH KRAMER BCLS-33OR-5 Al-Mylar Conductor CAT6A F/UTP LSZH Cable Drain Wire Kramer s BCLS-33OR is a high performance CAT6A F/UTP cable designed for IT, LAN and Ethernet installations.
More informationCustomer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes.
Solutions for Customer Premise Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes. The product range of distribution boxes offers small distribution
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationSuccess Depends on the Crimp
Success Depends on the Crimp Understanding the UL-486F Standard for Bare and Covered Ferrules Vince Barone, May 12, 2015 1 Agenda 2 What is a Ferrule? Ferrules are terminals that only have a barrel. They
More informationInstall & Go Cat.8 STP Trunk Cable Assembly Description
Description Cat 8 Filler Cat.8.2 S/FTP Horizontal cables (x6) Fan-Out Cables Cat 8 STP Keystones TRUNK CABLE SECTION VIEW Assembly Isometric Front View RiT s Copper Install & Go System provides a pre-terminated
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More informationI am the new generation. Temposonics. Magnetostrictive Linear Position Sensors. R-Series V RP Profinet RT & IRT Data Sheet
Temposonics Magnetostrictive Linear Position Sensors R-Series V RP Profinet RT & IRT Profinet with IRT (Isochronous Real Time) Position + velocity measurements for up to 30 magnets Field adjustments and
More informationSafety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
More informationQN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
More informationStandard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationC400-TMTM-30-X. Jumper Assembly Sample Label. Product Classification. General Specifications. Electrical Specifications
C400-TMTM-30-X Product Classification Brand Product Series Product Type CNT-400-FR CNT Jumper with interface types TNC Male and TNC Male, 9.14 m CNT CNT-400 Braided cable assembly General Specifications
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
More informationMINI CIRCULAR DIN PLUGS
MINI CIRCULAR DIN PLUGS 7000 SERIES SERIES. Plug for Cable Solder! Available in 3, 4, 5, 6, 7, 8 and 9 circuits! Voltage rating: 50V AC/DC! With inner metal cover, strain relief cap and plastic hood! Current
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationDatasheet. W-series terminal with clamping yoke connection WDU 16
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationHARTING. Value Added Solutions
HARTING Value Added Solutions Han Industrial Cable Assemblies Value Added Solutions HARTING is one of the world s leading manufacturers of electrical and electronic connectors. As an industry leader with
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
More informationTemposonics. Magnetostrictive Linear Position Sensors. EP2 CANopen Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EP2 CANopen Optimal price- / performance ratio Position measurement with more than one magnet Smooth & compact Temposonics EP2 CANopen MEASURING TECHNOLOGY
More informationCurrent / residual current and voltage transformers. Current / residual current and voltage transformers
Current / residual current and voltage transformers Current / residual current and voltage transformers 1 Overview Current transformer overview DIN rail current transformer with fuse Current transformer...
More informationGeneral characteristics and technical data Series VarioPro Basic
General characteristics and technical data Series VarioPro Basic Series Electrical values Operating voltage (DC) Test voltage (DC) 8 kv 12 kv Housing HV- 1-2 Insulation material Flammability class POM
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationTemposonics. Magnetostrictive Linear Position Sensors. EP2 Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EP2 Analog Optimal price- / performance ratio Position measurement with more than one magnet Smooth & compact Temposonics EP2 Analog MEASURING TECHNOLOGY
More informationIntroducing IDC SSL Connector
Introducing IDC SSL Connector The IDC SSL connector series are insulation displacement (IDC) SMT and thru-hole wire-to-board connectors designed for quick, tool-less termination of discrete wires onto
More informationIntroduction to Copper Products Copper Cable Assemblies
Introduction to Copper Products Copper Cable Assemblies A copper cable assembly is only as good as its parts and at Clearfield, we only use the best parts available. Whether it s a custom cabling solution
More information1/4" and 3.5 mm Phone Plugs
N Y S P r o d u c t G u i d e P l u g s 1/4" and 3.5 mm Phone Plugs NYS 204 NYS 208 NYS 224G NYS 225B Commercial 1/4" plugs and adapters All connectors acc. EIA RS-453 / IEC 60603-11 Short and long turned
More informationDiscrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationMedium-base Lampholders
Medium-base Lampholders For HID Lamps Medium-base lampholders Material: porcelain, white Nominal rating: 4A/250V/5kV pulse rated Terminals: bushings with set screws 18 14AWG solid Screw shell insert: zinc-plated
More informationC195-SMQM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C195-SMQM-3M Product Classification Brand Product Series Product Type CNT-195 CNT Jumper with interface types SMA Male and QMA Male, 3M CNT CNT-195 Braided cable assembly General Specifications Body Style,
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More information3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
More informationC240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
More informationI am the new generation. Temposonics. Magnetostrictive Linear Position Sensors. R-Series V RH Profinet RT & IRT Data Sheet
Temposonics Magnetostrictive Linear Position Sensors R-Series V RH Profinet RT & IRT Profinet with IRT (Isochronous Real Time) Position + velocity measurements for up to 0 magnets Field adjustments and
More informationC400-NMTM-1M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C400-NMTM-1M Product Classification Brand Product Series Product Type CNT-400 CNT Jumper with interface types N Male and TNC Male, 1m CNT CNT-400 Braided cable assembly General Specifications Body Style,
More informationGameChanger Cable. Unshielded Twisted Pair Riser Rated - CMR PRYWB (legacy part no)
GameChanger Cable Unshielded Twisted Pair Riser Rated - CMR 258310333 46224PRYWB (legacy part no) 1.0 Scope 1.1 This cable consists of 4 pair solid bare copper; color-coded high density polyethylene (HDPE)
More informationScreened servo cable with PUR outer sheath for highly dynamic power chain application - certified
Screened servo cable with PUR outer sheath for highly dynamic power chain application - certified - Screened servo cable for high dynamic power chain application in harsh conditions with UL/CSA AWM and
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More information7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195
7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195 RF Connectors Technical Data Sheet PE4567 Configuration 7/16 DIN Male Connector
More informationPanduit 28 AWG Patch Cords Installation Guideline
Panduit 28 AWG Installation Guideline Panduit is a leading supplier of Structured Cabling Systems and Unified Physical Infrastructure. Panduit solutions enable the physical infrastructure to be scalable,
More informationUSB 2.0-IP67 Water Resistant Connector System
Section 6 USB 2.0-IP67 Water Resistant Connector System CONEC completed its product line of bayonet locking series, IP67 rated industrial USB 2.0 connector system for harsh environments. The housing can
More informationEthernet & High Speed Networks. Quadrax Contact up to Cat6 MIL-DTL-38999/ARINC 600/EN2997/EN3646
Ethernet & High Speed Networks Quadrax Contact up to Cat6 MIL-DTL-38999/ARINC 600/EN2997/EN3646 Quadrax Contact Presentation Today s technology for Aeronautic and Military equipment is more and more complex,
More informationPluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
More information