Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
|
|
|
- Adam Lyons
- 5 years ago
- Views:
Transcription
1
2 Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors conform to the requirements of MIL-C-39012, and the interface is in compliance with MIL-STD Available in 50 Ω and 75 Ω, the provides broadband capability through 10 GHz with a snap-on connector design and utilizes die cast components on non-critical areas to provide a low-cost solution. Features/Benefits Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality. Quick connect/disconnect snap-on mating reduces installation time. Various plating options in nickel, gold, and tin. Selective plating provides corrosion resistance finish as well as good solderability characteristics. PCB slide-on plug and jack allows board-to-board mounting with a low insertion force. This is ideal for mating a high number of connectors on a pair of PCB s. Applications Automotive Base Stations Cable Assemblies Components Instrumentation PC/LAN Process Controls Radio Boards Surge Protection Telecom Test and Measurement Video Systems
3 50 Ω Specifications Electrical Impedance Frequency range VSWR RF-leakage Voltage rating (at sea level) Contact resistance Insulation resistance Insertion loss maximum Dielectric withstanding voltage Mechanical Mating Braid/Jacket cable affixment Center conductor cable affixment Captivated contacts Engagement force Disengagement force Durability (matings) 50 Ω DC - 4 GHz (usable to 10 GHz) 1.2 DC - 4 GHz GHz 55 db 1 GHz (flexible cable) 250 Vrms (depending on cable) center contact: 6 mω outer contact: 2.5 mω braid to body: 1 mω 5,000 MΩ minimum GHz 1,000 Vrms (at sea level) Snap-on coupling (MIL-STD-348) Hex crimp Solder All, unless noted otherwise 14.2 lbs (63N) 1.8 lbs (8N) 500 cycles minimum Environmental Temperature range -65 C to +165 C Thermal shock MIL-STD-202, method 107, cond. B Moisture resistance MIL-STD-202, method 106 Corrosion MIL-STD-202, method 101, cond. B Vibration MIL-STD-202, method 204, cond. D Mechanical shock MIL-STD-202, method 213, cond. B 37
4 C L 50 Ω Specifications (continued) Material Body and outer contacts Male contact Female contact Crimp ferrule Insulator Body: brass or zinc alloy (ASTM-B86-71), gold or nickel plated Brass, gold plated Beryllium copper or phosphor bronze, gold plated Copper or brass, nickel or gold plated PTFE Military MIL-C-22557A where applicable Plug Jack 141 MIN 141 MIN 117 MIN REF PLANE.010 MAX 141/ MAX 007 MAX REF PLANE 065 MIN ø 146 MAX ø 021/ 019 ø 081 MAX ø 082 MIN 007/ MIN 064 MAX 000 MIN 010 MIN 052 MIN 38
5 75 Ω Specifications Electrical Impedance Frequency range VSWR RF-leakage Voltage rating (at sea level) Contact resistance Insulation resistance Insertion loss maximum Dielectric withstanding voltage Mechanical Mating Braid/Jacket cable affixment Center conductor cable affixment Captivated contacts Engagement force Disengagement force Durability (matings) 75 Ω DC - 4 GHz 1.4 DC - 4 GHz 55 db 1 GHz (flexible cable) 250 Vrms (depending on cable) center contact: 6 mω outer contact: 1 mω braid to body: 1 mω 5,000 MΩ minimum GHz 1,000 Vrms (at sea level) Snap-on coupling (MIL-STD-348) Hex crimp Solder All, unless noted otherwise 14.2 lbs (63N) 1.8 lbs (8N) 500 cycles minimum Environmental Temperature range -65 C to +165 C Thermal shock MIL-STD-202, method 107, cond. B Moisture resistance MIL-STD-202, method 106 Corrosion MIL-STD-202, method 101, cond. B Vibration MIL-STD-202, method 204, cond. D Mechanical shock MIL-STD-202, method 213, cond. B 39
6 75 Ω Specifications (continued) Material Body and outer contacts Male contact Female contact Crimp ferrule Insulator Body: brass or zinc alloy (ASTM-B86-71), gold or nickel plated Brass, gold plated Beryllium copper or phosphor bronze, gold plated Copper or brass, nickel or gold plated PTFE Military MIL-C-22557A where applicable Note: These characteristics are typical but may not apply to all connectors. Plug Jack.141 MIN.141 MIN.117 MIN REF PLANE 010 MAX 141/ MAX 007 MAX REF PLANE 065 MIN ø.130 MAX ø 244 MAX ø 021/ 019 ø 131 MIN.007/ MIN.064 MAX 000 MIN 010 MIN 052 MIN 40
7 50 Ω Cable Connectors Straight Plugs Cable Group Part Number Body Contact Body Contact A P-51S Gold Gold Crimp Solder A P-51S Gold Gold Crimp Solder A P-51S Nickel Gold Crimp Solder A P-51S Gold Gold Crimp Crimp A P-51S1 Nickel Gold Crimp Crimp B P-51S Gold Gold Crimp Solder B P-51S Nickel Gold Crimp Solder B P-51S1 Nickel Gold Crimp Crimp B P-51S Gold Gold Crimp Crimp B P-51S Gold Gold Crimp Solder B P-51S Gold Gold Crimp Crimp B P-51S1 Nickel Gold Crimp Crimp Angle Plugs Cable Group Part Number Body Contact Body Contact Description A P-51A Gold Gold Crimp Solder A P-51A1 Gold Gold Crimp Solder Zinc Diecast Body A P-51A1 Nickel Gold Crimp Solder B P-51A Gold Gold Crimp Solder B P-51A Nickel Gold Crimp Solder B P-51A2 Nickel Gold Crimp Solder B P-51A2 Nickel Gold Crimp Solder 41
8 50 Ω Cable Connectors (continued) Straight Bulkhead Jacks Cable Group Part Number Body Contact Body Contact B J-51S1 Gold Gold Crimp Solder B J-51S Gold Gold Crimp Solder L J-51S Gold Gold Solder Solder Angle Bulkhead Jacks Cable Group Part Number Body Contact Body Contact B J-51A Gold Gold Crimp Solder B J-51A Gold Gold Solder Solder B J-51A2 Gold Gold Crimp Solder 50Ω Receptacles Straight Front Mount Bulkhead Jacks Part Number Body Contact Terminal Type J-51R Gold Gold Solder Cup J-51R Gold Gold Blunt Post Angle Front Mount Bulkhead Jacks Part Number Body Contact Terminal Type J-51R Gold Gold Solder Cup Straight Rear Mount Bulkhead Jacks Part Number Body Contact Terminal Type J-51R Gold Gold Solder Cup Straight Recessed Mount Bulkhead Jacks Part Number Body Contact Terminal Type J-51R Gold Gold Solder Cup 42
9 50Ω Printed Circuit Board Connectors Straight Plugs Part Number Body Contact Terminal Type Description P-53P Gold Gold Blunt Post For.360 (9mm) Bd. Spacing/Four Legs J-53P Gold Gold Blunt Post For.360 (9mm) Bd. Spacing/Four Legs Straight Jacks Part Number Body Contact Terminal Type Description J-51P Gold Gold Blunt Post Four Legs J-51P2 Gold Gold Blunt Post Four Legs Straight Bulkhead Jacks Part Number Body Contact Terminal Type Description J-53P Nickel Gold Blunt Post Four Legs J-51P Gold Gold Blunt Post Four Legs J-51P Matte Tin Gold Blunt Post Four Legs Angle Bulkhead Jacks Part Number Body Contact Terminal Type Description J-51A Gold Gold Blunt Post Four Legs/Leak Tight J-51A Gold Gold Blunt Post Four Legs/Leak Tight Accessories /SMC Accessories: Jam Nuts Part Number Description /SMC Gold Plated Nut Hex, Bulk pack version /SMC Accessories: Lockwashers Part Number Description /SMC Gold Plated Lockwasher, Bulk pack version 43
10 75 Ω Cable Connectors Straight Plugs Cable Group Part Number Body Contact Body Contact B P-71S Nickel Gold Crimp Solder B P-71S3 Gold Gold Crimp Solder B P-71S Nickel Gold Crimp Solder B P-71S Gold Gold Crimp Solder B P-71S Nickel Gold Crimp Solder I P-71S7 Gold Gold Crimp Solder I P-71S Gold Gold Crimp Solder K P-71S Gold Gold Crimp Solder Angle Plugs Cable Group Part Number Body Contact Body Contact B P-71A Gold Gold Crimp Solder B P-71A Nickel Gold Crimp Crimp Straight Bulkhead Jacks Cable Group Part Number Body Contact Body Contact B J-71S Gold Gold Crimp Solder 75Ω Receptacles Straight Bulkhead Jacks Part Number Body Contact Type Description J-71R Gold Gold Solder Cup Rear Mount J-71S Gold Gold Solder Cup Panel Threaded 44
11 75Ω Printed Circuit Board Connectors Straight Plugs Part Number Body Contact Type Description P-71P Gold Gold Blunt Post Four Legs, Slide-On Angle Jacks Part Number Body Contact Type Description J-71A Nickel Gold Blunt Post Four Legs J-71P Gold Gold Blunt Post Four Legs Straight Jacks Part Number Body Contact Type Description J-71P Nickel Gold Blunt Post Four Legs Edge Mount Jacks Part Number Body Contact Type Description J-71P Gold Gold Blunt Post Four Legs 45
12 Cable Group Listing Cable Group Cable Type A RG-178, 196 B RG-174, 188A, 316, Belden 7805 B1 RG-179, 187, Belden 9221 B2 RD-188/U, RD-316/U B3 RD-179/U, AT&T 19224L2 C RG-58, 58A, 58C, 141, 303, LMR195, Belden 7806A, 9907 C1 RG-55, 142, 223, 400 C2 LMR200, Belden 7807A D RG-58/U Plenum, Thinnet, RG-122/U, Belden 88240, E RG-59, 62, 140, 210, Belden 8241, 8263, 8279, 9209 E1 RG-59/U 20 AWG center conductor, Belden 1426A, 1505A, 9100, 9278 E2 RD-59/U, Belden 8281, 9141, 9231 E3 RG-59/U Quad Shield, Belden 1152A F RG-59/U Plenum, Belden 1560A, 9259, 82259, 89259, F1 RG-59/U Plenum 20 AWG center conductor, Belden G1 RG-6, 143, 212 G2 8X, LMR240, Belden 7808A, 9258 G3 LMR400, Belden 7810A, 8214, 9913 G4 RG-8, 8A, 9, 87A, 213, 214, 225, 393 G5 RD-6/U H RG-11 H1 Belden 1694A, 9248 H2 Belden 1859A, 7731, 8213, 9292 H3 RG-54A/U I AT&T 734A, Belden 1505A I2 AT&T 735A, Belden 735A1 J Quad 59 headend cable K LMR600 K2 Belden 1695A K3 RG-122, 180, 195, Belden 1855, 1865A, 8218 L.141 semi-rigid, RG-402/U L2.085,.086,.087 semi-rigid, RG-405/U L3.250 semi-rigid L4.047 semi-rigid, Belden 1674 M 1/2 inch annular corrugated M1 1 1/4 inch annular corrugated M2 1 5/8 inch annular corrugated M3 7/8 inch annular corrugated N 1/4 Helical N1 3/8 Helical N2 1/2 Helical N3 7/8 inch SFC P1.81 mm OD micro-cable P mm OD micro-cable, TCB-068 P mm OD micro-cable P mm OD micro-cable 46 Cable Group Listing
Amphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications
Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
Amphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications
Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
Amphenol RF- BNC Connector Series
Page 1 of 7 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
Ø1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT
SSMB / SSMC This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC). They provide
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
SECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
SERIES SMB SUBMINIATURE CONNECTORS
SERIES SMB SUBMINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE The HUBER+SUHNER subminiature connectors Series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.
SERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
STANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
MCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
TNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
SMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
SMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
INTRODUCTION A WIDE STANDARD RANGE MANY FULL CRIMP MODELS LOW INTERMODULATION CONNECTORS
N INTROUCTION The new Radiall N series has been developed using the latest advances in connector design. These connectors are easy--to--use, highly reliable, innovative and are designed to meet the needs
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
SMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
SECTION 12. N / Composite N / N 18 GHz R161 / R162 / R163
SECTION 12 12 N / Composite N / N 18 GHz R161 / R162 / R163 Contents Introduction... 12-4 to 12-5 N 50Ω and Composite N Interface... 12-6 Characteristics... 12-8 to 12-9 ECO N characteristics... 12-9
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
kwiqmate Connectors Product Catalog Johnson
Product Catalog Johnson Emerson Connectivity Solutions, provider of kwiqmate branded Johnson product line of QMA connectors features a push-on style interface. Traditionally SMA plugs need to be configured
BNC Connectors (50 ohm/75 ohm)
BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors
ReversePolarity Series(SMA,BNC,TNC)
RP ReversePolarity Series(SMA,BNC,TNC) Description Reverse polarity BNC, TNC, N & SMA connectors (RP-BNC, RP-TNC, RP-SMA) are designed for uses in wireless applications where a non-standard interface has
TNC Series. Interface Mating Dimensions. Coaxial Connectors
TNC connectors are designed with a Highly reliable threaded coupling to ensure additional protection against shocks and vibrations. They are dimensionally and electrically similar to the BNC series, and
MMS/MMT MMCX CONTENTS PAGE MMS/MMT
MMCX CONTENTS PAGE MMS/MMT Introduction... 4 General... 5 Characteristics MMS... 6 Characteristics MMT... 7 Connectors...8-9 Plugs... 10 Standard cable assemblies...11-12 Receptacles... 13 Adapters...
Corning Gilbert Inc. Microwave Push-on Interconnects 1
Corning Gilbert Inc. Microwave Push-on Interconnects 1 GPO Specifications General Characteristics Impedance 50 ohms nominal Frequency range DC to 40 GHz Temperature range -65 C thru 165 C Electrical Characteristics
Interface Mating Dimensions
connectors are subminiature units designed to provide high electrical performance for microwave applications up to 18GHz. Constructed with Brass or high quality stainless steel, connectors ensure excellent
7/16 GENERAL. DC GHz GENERAL APPLICABLE STANDARDS APPLICATIONS
GENERAL 50 Ω C - 7.5 GHz GENERAL Standard coaxial connectors Screw--on coupling High power rating Excellent RF performance APPLICABLE STANARS IEC 169-4 IN 47223 22 190 APPLICATIONS Mobile communication
Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System
BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed
GPPO Interconnect Series Product Information
GPPO Interconnect Series Product Information A sub-miniature, push-on, high performance, microwave interconnect system. Developed in response to industry demand for increased package density, lower weight,
RF & MW Connectors. 6 Where signal & Connectivity is needed, There is GigaLane
RF & MW Connectors - 2.4 mm Connectors - 2.92 mm Connectors - Hermetic Seal (0.012 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0100 inch RF Connectors Technical Data Sheet PE4046 Configuration SMB Plug Connector MIL-STD-348A 50 Ohms
SMA Self-Fixture End Launch Connectors
SMA Self-Fixture End Launch Connectors INTRODUCTION / APPLICATIONS Applications for these connectors include: An ideal solution for design engineers who are obligated to cut manufacturing costs and complexity
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402 RF Connectors Technical Data Sheet PE4790 Configuration SMA Male Reverse Polarity Connector MIL-STD-348 50 Ohms Right
RF COAXIAL CONNECTORS
RF COAXIAL CONNECTORS 17550 Gillette Avenue, Irvine, California 92614 www.sabritec.com Telephone (949) 250-1244 Fax (949) 250-1009 157 CoAXIAL CONNECTORS SCX Coaxial INTRODUCTION Sabritec offers a complete
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms
CSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
SMA Self-Fixture End Launch Connectors
SMA Self-Fixture End Launch Connectors An ideal solution for design engineers who are obligated to cut manufacturing costs and complexity out of their circuit board system. For those microwave engineers
N / Composite N / N 18 GHz series R161 / R162 / R163
12 N / Composite N / N 18 GHz series R161 / R162 / R163 CONTENTS N Pages Introduction... 12-4 to 12-5 N Ω and Composite N Interface... 12-6 Characteristics...12-8 to 12-9 Plugs... 12-12 to 12-14 Jacks...
Table of Contents. Corning Gilbert Inc. Microwave Push-on Interconnects 1
Table of Contents Corning Gilbert Inc. Microwave Push-on Interconnects 1 TABLE OF CONTENTS General Information II Who We Are III Custom Designs IV Reference Guide GPO Products 2 GPO Specifications 3 Blindmate
RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].
![RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].](/thumbs/90/101629325.jpg "RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].")
RP SMA Male Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44724 Configuration SMA Male Reverse Polarity
141 SMNB Model Series
HAND Coaxial TM Cable 50Ω DC to 12.5 GHz 141 SMNB Model Series The Big Deal N-Type (F) Bulkhead Connector to SMA (M) Hand Formable Tight Bend-Radius (8mm min.) Ideal for interconnect of assembled systems
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated RF Connectors Technical Data Sheet PE45145 Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG174, RG316, RG188
General Information MMCX MMCX
MMCX SMB Adaptor MCX 7/16 DIN N TNC BNC Adaptor SMB MMCX SMA General Information The MMCX connector was developed in the 1990's. MMCX is a microminiature connector series with a lock-snap mechanism allowing
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219 RF Connectors Technical Data Sheet PE4433 Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
RF Microwave Standard Assemblies
RF Microwave Standard Assemblies RF Microwave Standard Assemblies 146 Q-Flex Series Specifications Q-Flex assemblies are a unique ALTERNATIVE to custom designed flexible coaxial cables.traditionally custom
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
Board to Board Connector Board to Board Connector
Board to Board Connector Board to Board Connector GigaLane Board to Board connectors are especially developed for board-to-board and board-to-module RF interconnections. It is the perfect solution for
EN2 SERIES SEALED CONNECTORS
FEATURES & BENEFITS Sealed to IP68, NEMA 250 (6P) (when mated) Available in standard or winged coupling ring Patented grommet and o-ring free design Solder/crimp and PC contact options APPLICATIONS Any
KCN KCN KCN KCN KCN KCN KCN KCN KCN KCN
series KCN4011200000 KCN4032200040 KCN4041100000 KCN4043110180 KCN4043140000 KCN4011200010 KCN4032200050 KCN4043100000 KCN4043110190 KCN4043140090 KCN4011200020 KCN4041200000 KCN4037100000 KCN4043110220
Electrical Components Catalog RF Connectors
Introduction Product Facts Designed and Manufactured to meet MI-C-39012 Requirements Wide Range of Connectors available in 50 and 75 Ohm Impedance The range offers connectors to suit from DC-11 GHz Operation
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5 reliable performance, dependable service Replace traditional RG types for benefit of: lower loss better shielding > - 90dB Drop in replacement
SMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
LGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
Quick Reference Guide KOAXXA SMA RF Interconnects
Quick Reference Guide KOXX SM RF Interconnects TE Connectivity introduces its next generation of RF products with KOXX RF interconnects. This product family premiers with the KOXX SM product line that
Coaxial Contacts General Description. Contacts AMPHENOL COAXIAL CONTACTS
s General Description AMPHENOL COAXIAL CONTACTS Offer several advantages f reliable interconnection and continued perfmance: Large crimping area assures low contact resistance and high tensile strength
Tru products are now under the Tru-Win brand from Winchester Interconnect.
TRU MEIA Series Tru-Win MEIA offers the latest innovation in high power connector design. The MEIA interface provides equivalent kw power handling compared to similar EIA connector line sizes but provides
TNC / TNC 18 GHz series R143 / R144
11 TNC / TNC 18 GHz series R143 / R144 CONTENT TNC Pages TNC Introduction... 11-4 Interface... 11-4 Characteristics... 11-6 TNC Ω Plugs... 11-8 to 11-9 Jacks... 11-9 to 11-11 Receptacles... 11-11 to 11-12
The GPO male interface is compliant to MIL-STD-348, and it is in accordance with MIL-PRF-39012a and DESC 94007/94008.
GPO, GPPO and G3PO Application Notes Corning Gilbert s push-on connector products allow users flexibility in modular and board layout (in high density situations), frequency bandwidths from DC to 100 GHz
Quick Reference Guide RF Coaxial Connectors
Quick Reference Guide Coaxial RF Products: Quick View Product Operating Frequency (Max.) Impedance VSWR Durability (Mating Cycles) Operating Temp. Coupling Style Standard 7/16 7 GHz 50 Ω 1.02 + 0.03f up
Series 791 Connectors
Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55 RF Connectors Technical Data Sheet Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG142, RG223, RG400, RG55
Optimize Your RF/MW Coaxial Connections. Dave McReynolds Director of Engineering RF Industries
RF Optimize Your RF/MW Coaxial Connections Dave McReynolds Director of Engineering RF Industries /microwave connectors are small and often overlooked, but they serve as gateways for many electronic devices
SERIES 85 RF, MICROWAVE AND DATALINK CONTACTS
SERIES 5 RF, MICROWAVE AND DATALINK CONTACTS for MIL-DTL-999, Series SuperNine, Series 0 Mighty Mouse, and Series 9 Micro-Crimp connectors APRIL 06 High Speed High Reliability High Availability No more
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195
7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195 RF Connectors Technical Data Sheet PE4567 Configuration 7/16 DIN Male Connector
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4447 Configuration TNC Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency
086 Model Series. 50Ω DC to 18 GHz. The Big Deal
HAND Coaxial TM Cable 50Ω DC to 18 GHz 086 Model Series The Big Deal Hand Formable Tight Bend Radius Excellent Return Loss and Insertion Loss Ideal for interconnect of assembled systems CASE STYLE: KP1505-XX
RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A
RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, 0240 inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A RF Connectors Technical Data Sheet PE44670 Configuration TNC Male Reverse Polarity Connector
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features
SC6015 DATA SHEET. BNC Female Bulkhead Connector Crimp/Solder Attachment For.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable
BNC Female Bulkhead Connector Crimp/Solder Attachment For 100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable BNC female bulkhead connector with crimp/solder attachment for 100 inch, RG316,
Rosenberger. WSMP Coaxial RF Connectors and RF Coaxial Cable Assemblies ROSENBERGER NORTH AMERICA. For High Density Applications to 100 GHZ
Rosenberger For High Density Applications to 100 GHZ WSMP Coaxial RF Connectors and RF Coaxial Cable Assemblies ROSENBERGER NORTH AMERICA WSMP Coaxial RF Connectors and RF Coaxial Cable Assemblies Provides:
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4474 Configuration HN Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency 3
RF COAXIAL PHASE SHIFTER SMA DC to 18 GHz DETAIL SPECIFICATION
1/ 35 Titre / Title RF COAXIAL PHASE SHIFTER SMA DC to 18 GHz DETAIL SPECIFICATION Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 04/12/2015 Vérifié
Table Of Contents. General Series Specifications... BNC Twist-On Connectors... BNC Crimp-On Connectors... BNC 50 Ohm Crimp-Crimp Connectors...
Table Of Contents General Series Specifications... TwistOn Connectors... CrimpOn Connectors... 50 Ohm CrimpCrimp Connectors... Receptacles, Adapters & Terminations... TNC TwistOn Connectors... TNC CrimpOn
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment RF Connectors Technical Data Sheet PE44280 Configuration 7/16 DIN Male Connector MIL-C-39012 50 Ohms Right Angle Body Geometry Features Silver
... A Vital Part of Connection World CMPTER. 1.85mm Connector Applycation Receptacles With Accepts Pin
... A Vital Part of Connection World 1.85mm Connector Applycation Receptacles With Accepts Pin COPYRIGHT ELECTRONICS 2014 1.85mm Precision Connectors DESCRIPTION The 1.85mm connector are 50 ohm precision
PERFORMANCE SPECIFICATION SHEET
INCH-POUND 10 August 2016 SUPERSEDING 16 November 2011 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, PIN CONTACT, JAMNUT MOUNTED, REAR
D Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
WiFi Interface Identifier
WiFi Interface Identifier WiFi Interface Identifier Today s wireless market has exposed us to many new, and some familiar connectors. The wide range of antennas, access points, routers, WLAN s, cellular
Date: April 27 th, 07. Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS SMA TYPE, 50 OHMS (FEMALE CONTACT)
REF. : RADDETCONN003 2 / 1/ 18 Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS SMA TYPE, 50 OHMS (FEMALE CONTACT) Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space
Times Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 480.48 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
ATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications.
ATBTK-MF-4G Bias Tee Kit, AISG Compatible 698-2700 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface 7-16 DIN Female BTS Interface 7-16 DIN Male Dimensions
ANN-MS. active GPS antenna. Data Sheet. locate, communicate, accelerate. Abstract
locate, communicate, accelerate ANN-MS active GPS antenna Data Sheet Abstract The ANN active GPS antenna with integrated low-noise amplifier (LNA) is the perfect match to the u-blox GPS receivers. 48 x
RG142-TNMNM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR. Regulatory Compliance/Certifications
RG142-TNMNM-3M Product Classification Product Series Product Type RG142 CNT Jumper with interface types and, 3 m RG142 Braided cable assembly General Specifications Body Style, Connector A Body Style,