C240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR

Transcription

1 C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A Straight Body Style, Connector B Straight Interface, Connector A N Female Interface, Connector B SMA Male Length m ft Nominal Size in Specification Sheet Revision Level A Jumper Assembly Sample Label Return Loss/VSWR Frequency Band VSWR Return Loss (db) MHz page 1 of 11 most current information. Revised: November 10, 2017

2 C240-NFSM-3M Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant by Exemption China RoHS SJ/T Above Maximum Concentration Value (MCV) ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system Included Products 240APNF-CR Type N Female for braided cable, CNT 50 Ohm Braided Coaxial Cable, black PE jacket -SFR -SFR, CNT 50 Ohm Braided Coaxial Cable, black PE jacket page 2 of 11 most current information. Revised: November 10, 2017

3 240APNF-CR Type N Female for braided cable Product Classification Brand Product Type General Specifications Interface Body Style Electrical Specifications Operating Frequency Band Cable Impedance Connector Impedance RF Operating Voltage, maximum (vrms) dc Test Voltage Outer Contact Resistance, maximum Inner Contact Resistance, maximum Insulation Resistance, minimum Average Power Peak Power, maximum Insertion Loss, typical CNT Braided cable connector N Female Straight MHz 50 ohm 50 ohm V 1500 V 0.25 mohm 1.00 mohm 5000 MOhm MHz 5.60 kw 0.05 db page 3 of 11

4 240APNF-CR Outline Drawing Mechanical Specifications Outer Contact Attachment Method Crimp Outer Contact Plating Trimetal Inner Contact Plating Silver Inner Contact Attachment Method Solder Interface Durability 500 cycles Interface Durability Method IEC :9.5 Connector Retention Tensile Force 134 N 30 lbf Connector Retention Torque 0.23 N-m 0.17 ft lb Dimensions Nominal Size Diameter Length Weight Width in mm 0.62 in mm 1.15 in g 0.05 lb mm 0.62 in Environmental Specifications page 4 of 11

5 240APNF-CR Operating Temperature -40 C to +85 C (-40 F to +185 F) Storage Temperature -65 C to +125 C (-85 F to +257 F) Water Jetting Test Mating Mated Water Jetting Test Method IEC 60529:2001, IP65 Mechanical Shock Test Method IEC Climatic Sequence Test Method IEC Damp Heat Steady State Test Method IEC Thermal Shock Test Method IEC Vibration Test Method IEC Corrosion Test Method IEC Standard Conditions Attenuation, Ambient Temperature 20 C 68 F Average Power, Ambient Temperature 40 C 104 F Average Power, Inner Conductor Temperature 100 C 212 F Return Loss/VSWR Frequency Band VSWR Return Loss (db) MHz MHz Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system * Footnotes Insertion Loss, typical 0.05v freq (GHz) (not applicable for elliptical waveguide) page 5 of 11

6 , CNT 50 Ohm Braided Coaxial Cable, black PE jacket Product Classification Brand Product Series Product Type Construction Materials Jacket Color Jacket Material Braid Material Shield Tape Material Dielectric Material Inner Conductor Material Dimensions Cable Weight Diameter Over Dielectric Diameter Over Jacket Diameter Over Tape Inner Conductor OD Nominal Size Outer Conductor OD Electrical Specifications Cable Impedance Capacitance dc Resistance, Inner Conductor dc Resistance, Outer Conductor dc Test Voltage Jacket Spark Test Voltage (rms) CNT Braided coaxial cable Black Non-halogenated PE Tinned copper Aluminum Foam PE Copper 0.05 kg/m mm in mm in mm in mm in in mm in 50 ohm 79.8 pf/m 24.4 pf/ft ohms/km ohms/kft ohms/km ohms/kft 2500 V 2500 V page 6 of 11

7 Maximum Frequency GHz Operating Frequency Band MHz Peak Power 5.6 kw Shielding Effectiveness >90 db Velocity 83% Environmental Specifications Installation Temperature -40 C to +85 C (-40 F to +185 F) Operating Temperature -40 C to +85 C (-40 F to +185 F) Storage Temperature -70 C to +85 C (-94 F to +185 F) General Specifications Cable Type Braid Coverage Packaging Type 90% braid Reel Mechanical Specifications Bending Moment Flat Plate Crush Strength * Values typical, guaranteed within 5% 0.3 N-m 0.3 ft lb 0.4 kg/mm 20.0 lb/in Minimum Bend Radius, Single Bend mm 0.75 in Tensile Strength Electrical Performance 36 kg 80 lb Frequency Attenuation (db/100 m) Attenuation (db/100 ft) 30 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Regulatory Compliance/Certifications page 7 of 11

8 Agency RoHS 2011/65/EU China RoHS SJ/T ISO 9001:2008 Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system page 8 of 11

9 -SFR -SFR, CNT 50 Ohm Braided Coaxial Cable, black PE jacket Product Classification Brand Product Series Product Type Construction Materials Jacket Color Jacket Material Braid Material Shield Tape Material Dielectric Material Inner Conductor Material Dimensions Cable Weight Diameter Over Dielectric Diameter Over Jacket Diameter Over Tape Inner Conductor OD Nominal Size Outer Conductor OD Electrical Specifications Cable Impedance Capacitance dc Resistance, Inner Conductor dc Resistance, Outer Conductor dc Test Voltage Jacket Spark Test Voltage (rms) CNT Braided coaxial cable Black Non-halogenated PE Tinned copper Aluminum Foam PE Copper 0.05 kg/m mm in mm in mm in mm in in mm in 50 ohm 79.8 pf/m 24.4 pf/ft ohms/km ohms/kft ohms/km ohms/kft 2500 V 2500 V page 9 of 11

10 -SFR Maximum Frequency GHz Operating Frequency Band MHz Peak Power 5.6 kw Shielding Effectiveness >90 db Velocity 83% Environmental Specifications Installation Temperature -40 C to +85 C (-40 F to +185 F) Operating Temperature -40 C to +85 C (-40 F to +185 F) Storage Temperature -70 C to +85 C (-94 F to +185 F) General Specifications Cable Type Braid Coverage Packaging Type 90% braid Reel Mechanical Specifications Bending Moment Flat Plate Crush Strength * Values typical, guaranteed within 5% 0.3 N-m 0.3 ft lb 0.4 kg/mm 20.0 lb/in Minimum Bend Radius, Single Bend mm 0.75 in Tensile Strength Electrical Performance 36 kg 80 lb Frequency Attenuation (db/100 m) Attenuation (db/100 ft) 30 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Regulatory Compliance/Certifications page 10 of 11

11 -SFR Agency RoHS 2011/65/EU China RoHS SJ/T ISO 9001:2008 Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system page 11 of 11