Series 791 Connectors

Transcription

1 Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) Voltage Drop: 73 millivolts maximum, 5A, 25 C, 22 AWG wire body: copper alloy Socket hood: stainless steel, passivated finish: 50 microinches minimum gold plating over nickel underplate Size 16 Power s Size 23 contacts are designed to meet SAE AS39029 requirements. These snap-in, rear release contacts are compatible with Series 790 and 791 connectors. Type AWG Wire Size Part Number Pin Pin Socket Socket Pin Socket Type AWG Wire Size Size #23 Crimp s ø A Color In. mm. Band Crimper Positioner.0335/ / / /.0245 Ø.0275 (0.699).0265 (0.673) Ø.053 (1.35) HOOD Part Number Pin (M39029/58-364) Socket (M39029/57-358) 0.851/ / / / None Blue None Blue.289 (7.34).283 (7.19).034 (0.86).029 (0.74).440 (11.18).275 (6.99).265 (6.73) Size #16 Power s Crimper (M22520/1-01) (M22520/1-01).165 (4.19).160 (4.06).028 (0.71).022 (0.56) Ø A Positioner (M22520/1-04) (M22520/1-04) (K1461) Insertion/ Removal Tool (K1461) COLOR BAND Ø.048 (1.22).044 (1.12) Ø A Ø.056 (1.42) COLOR BAND Ø.048 (1.22).044 (1.12) Ø.056 (1.42) Standard size #16 contacts accept #16 to #20 AWG wire. Approved to SAE-AMS (13.49) REF.103 (2.62).518 (13.16) REF Insertion/ Removal Tool (M81969/14-03) (M81969/14-03).103 (2.62) Socket Ø.0635 (1.613).0616 (1.562).068 (1.73).066 (1.68).130 (3.30) Ø.113 (2.87) Operating temperature: -65 to +200 C Current rating: 13 ampere Voltage Drop: 49 millivolts maximum@13a, 16 AWG wire.068 (1.73).066 (1.68).130 (3.30) body: copper alloy, 50 Socket hood: stainless steel, passivated Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series 791

2 Pin and Socket s for Series 79 Connectors Crimp s Size 12 Power s Standard size #12 contacts accept #12 to #14 AWG wire. Approved to SAE-AMS Type AWG Wire Size Pin Socket (13.49) REF Part Number (M39029/58-365) (M39029/57-359) Size #12 Power s.151 (3.84) Crimper (M22520/1-01) (M22520/1-01) Positioner (M22520/1-04) (M22520/1-04).518 (13.16) REF Insertion/ Removal Tool.151 (3.84) Socket Ø.095 (2.41).093 (2.36).102 (2.59).098 (2.49).182 (4.62) Ø.161 (4.09).102 (2.59).098 (2.49).182 (4.62) Operating temperature: -65 to +200 C Current rating: 23 ampere Voltage Drop: 42 millivolts maximum@20a body: copper alloy, 50 Socket hood: stainless steel, passivated Size 8 Power s Size 8 contacts are designed to meet SAE AS39029 requirements. Snap in, rear release. Supplied with sealing boot Type AWG Wire Size Part Number Pin F Socket F Size #8 Power s Pneumatic Crimper (M22520/23-01) (M22520/23-01) Die Assembly (M22520/23-02) (M22520/23-02) Positioner (WA23-395L) (WA23-395L) Removal Tool Socket Ø.316 (8.03).313 (7.95).708 (17.98) REF.410 (10.41) MIN Operating temperature: -65 to +200 C Current rating: 46 ampere Voltage Drop: 26 millivolts maximum@46a body: copper alloy, 50 Socket hood: stainless steel, passivated.684 (17.37).410 (10.41) MIN.219 (5.56).217 (5.51).265 (6.73).262 (6.65).285 (7.24).265 (6.73).262 (6.65).033 (0.84).029 (0.74) Ø.179 (4.55) MIN SST HOOD Ø.316 (8.03).313 (7.95).033 (0.84).029 (0.74) Ø.179 (4.55) MIN 2018 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series

3 Coaxial s for Series 79 Connectors Size #12 AS39029 Coaxial s These snap-in, rear-release contacts Series 79 connectors with size #12 cavities. Crimp termination. SAE AS39029 qualified. Operating temperature: -65 to +200 C Dielectric withstanding voltage: 1000 Vac rms at sea level, 250 Vac at 50,000 feet Current rating: 1 ampere Inner contact, body, outer sleeve: copper alloy, gold over nickel underplate per AS39029 Type D Socket contact hood: stainless steel Insulator: fluoroplastic Size #12 AS39029 Coaxial s RG Cable Size Freq. Insertion/ Inner Shield Crimp Sleeve Removal Socket Crimper Positioner Crimper Die Set Tool RG MHZ (M39029/28-211) RG MHZ (M39029/28-211) RG MHz (M39029/28-409) RG MHz (M39029/28-211) (M39029/27-210) (M39029/27-210) (M39029/27-402) (M39029/27-210) (M22520/2-34) (M22520/2-34) (M22520/2-34) (M22520/2-34) (M22520/31-01) (M22520/31-01) (M22520/31-01) (M22520/31-01) (M22520/31-02) (M22520/31-02) (M22520/31-02) (M22520/31-02).182/ (0.79).570 (14.5).300/.295 (7.62/7.49).095/.093 (2.41/2.36).182/.179 Socket (14.2).031 (0.79) (7.34/7.09) Ø.020 (0.11).161 (4.09) AS39029 Color Stripes AS39029 Color Bands Part No. 1st 2nd 3rd M39029/ RED BROWN BLACK M39029/ YELLOW BLACK RED M39029/ RED BROWN BROWN M39029/ YELLOW BLACK WHITE M39029/ GREEN GREEN GRAY Cable Entry Inner Crimp Barrel , -002 RG174, RG179, RG (2.29) MIN RG (2.74) MIN RG (1.68) MIN.022 (0.56) MIN.084 (2.13) MIN Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series 791

4 Coaxial s for Series 79 Connectors Size #16 AS39029 Coaxial s These snap-in, rear-release contacts fit Series 79 connectors with size #16 cavities. Crimp termination. SAE AS39029 qualified. Operating temperature: -65 to +200 C Dielectric withstanding voltage: 800 Vac rms at sea level, 250 Vac at 50,000 feet Current rating: 1 ampere VSWR: MHz Inner contact, body, outer sleeve: copper alloy, gold over nickel underplate per AS39029 Type D Socket contact hood: stainless steel Insulator: fluoroplastic Size #16 AS39029 Coaxial s RG Cable Size Max. Freq. Socket Inner Shield Crimp Sleeve Crimper Positioner Crimper Die Set Insertion/ Removal Tool RG174 RG179 RG MHZ (M39029/76-424) (M39029/78-432) (M22520/2-35) (M22520/4-01) (M22520/4-02) (M81969/14-03) RG MHZ (M39029/76-425) (M39029/78-433) Socket (14.5).300/.295 (7.62/7.49).560 (14.2) (7.34/7.09).130/.127 (3.30/3.23).130/.127 (3.30/3.23).031 (0.79).0635/.0615 (1.61/1.56).031 (0.79).113 (2.87) AS39029 Color Stripes Cable Entry Inner Crimp Barrel AS39029 Part No. Color Bands 1st 2nd 3rd M39029/ YEL RED YEL M39029/ YEL RED GRN M39029/ YEL ORN RED RG174, RG179, RG (1.70) MIN RG (1.46) MIN.021 (0.53) MIN.0155/.0145 (0.39/0.37).087 (2.21) MIN M39029/ YEL ORN ORN 2018 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series

5 Coaxial s for Series 79 Connectors Size #12 50 Ohm High Frequency Matched-Impedance Coaxial s High Frequency coax contacts fit Glenair Series 79 connectors with size 12 contact cavities. 50 ohm nominal impedance. DC 3 GHz frequency range. s are snap-in, rear-release. Size Ohm High Frequency Matched-Impedance Coaxial s Socket RG Cable Max. Freq. Socket RG178 (M17/93-RG178) 3 GHz RG316 (M17/113-RG316) 3 GHz RG316DS (M17/ ) 3 GHz RG405-FLEX 3 GHZ (7.34/7.09).161/.158 (4.09/4.01) Ø.0205/.0195 (0.521/0.495) Socket (14.22).151/.148 (0.83/0.74) Socket Ø.182/.179 CRIMP FERRULE Ø.095/.093 (2.41/2.36).300/.295 (7.62/7.49) (14.48) SKT TO MATE WITH.0205/.0195 (0.521/0.495) PIN.151/.148 (0.83/0.74) /.179 CRIMP FERRULE (7.34/7.09).560 (14.22).151/ /.295 (7.62/7.49).570 (14.48).151/ /.158 (4.09/4.01) Ø.182/.179 Ø.095/.093 (2.41/2.36).182/.179 Ø.0205/.0195 (0.521/0.495) (0.83/0.74) SOLDER HOLE SKT TO MATE WITH.0205/.0195 (0.521/0.495) PIN SOLDER HOLE (0.83/0.74) Operating temperature: -650C to +2000C VSWR: 1.32:1 3 GHz Nominal impedance: 50 ohms Insertion loss: 0.20 db maximum at 3 GHz Dielectric withstanding voltage: 1000 Vac rms at sea level Current rating: 1 ampere Shock: EIA condition D Vibration: EIA condition VI, letter J Center contact, body, crimp sleeve: copper alloy, 50 microinches gold over nickel plating Insulator: fluoroplastic Part Number , Installation/Removal Tool Inner Shield Crimp Sleeve Crimper Positioner Crimper Hex Die (MH992) (MH992) (K1721) (K1721) (M22520/5-03) (M22520/5-03) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (MH992) (K1721) (M22520/5-03) Installation/ Removal Tool Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series 791

6 Coaxial s for Series 79 Connectors Size #12 75 Ohm High Frequency Matched-Impedance Coaxial s 75 ohm coax contacts provide DC 3 GHz frequency range. Crimp termination. Supplied as unassembled kit with contact body, center contact and outer ferrule. These snap-in, rear-release contacts fit Glenair Series 79 connectors. Gold-plated copper alloy, fluoroplastic insulator. Size Ohm High Frequency Matched-Impedance Coaxial s RG Cable Socket Socket RG179 (M17/94-RG179) V75268, V76261, V73263 (PIC Wire and Cable) Ø.095/.093 (2.41/2.36).300/.295 (7.62/7.49) , (14.48) SKT TO MATE WITH.0205/.0195 (0.521/0.495) PIN.151/.148 (0.83/0.74).182/.179 CRIMP FERRULE.161/.158 (4.09/4.01) Socket , (14.22) (7.34/7.09).151/.148 Ø.182/.179 Ø.0205/.0195 (0.521/0.495) CRIMP FERRULE (0.83/0.74) Operating temperature: -65 to +200 C Dielectric withstanding voltage: 500 Vac Current rating: 1 ampere VSWR: 1.25:1 3 GHz Impedance: 75 ohm Shock: EIA condition D Vibration: EIA condition VI, letter J Center contact, body,crimp sleeve: copper alloy, 50 microinches gold over nickel plating Insulator: fluoroplastic Hood: stainless steel, passivated Part Number (MH992) (MH992) (MH992) (MH992), Installation/Removal Tool Inner Shield Crimp Sleeve Crimper Positioner Crimper Positioner Inner (K1721) (K1721) (K1721) (K1721) (M22520/31-01) (M22520/31-01) (GP959) (M22520/5-03) (GP959) (M22520/5-03) Shield Insertion/ Removal Tool (MH992) (K1721) Installation/Removal Tool (M22520/31-01) (GP959) (M22520/5-03) 2018 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series

7 Coaxial s for Series 79 Connectors Size #12 SMPM-Type Spring-Loaded s for DC 40 GHz Female Male 50 ohm high frequency size #12 coaxial contacts fit Glenair Series 79 connectors. Maximum operating frequency 40 GHz. Spring-loaded male contact assures consistent mating dimensions and superior performance. Supplied fully assembled with cable termination instruction sheet. DC 40 GHz frequency range 50 ohm impedance Aerospace-grade construction SMPM-type Interface per MIL-DTL-348 Size Ohm SMPM-Type Coaxial s for DC 40 GHz Cable RG-405 Flex (Times Microwave TFlex-405) Tensolite LLF-1087) Female (Use in Pin Connectors) Spring-loaded interface Low insertion loss Solderless center contact VSWR 1.3 at 40 GHz Male (Use in Socket Connectors) Operating temperature: -55 C to +125 C Dielectric withstanding voltage: 500 Vac Ins. resistance: 5000 megohms min. Frequency range: DC 40 GHz VSWR: (.005 x Freq GHz) Impedance: 50 ohm Insertion loss:.04 x (Freq in GHz) RF leakage: -(90 Freq GHz) Center contact: copper alloy, 50 Dielectric: PTFE per ASTM D-1710 Female body: copper alloy, 50 Male body: stainless steel, passivated Male contact spring: high carbon steel (music wire), nickel plated Ø.152/.148 (3.86/3.76) Ø.092/.088 (2.34/2.24) Ø.182/.179 CABLE (REF) SOLDER Male /.464 (11.94/11.79) Ø.150 (3.81).751 (19.08).291/.287 (7.39/7.29).034/.030 (0.86/0.76) Female (6.48) (0.84/0.74).300/.295 (7.62/7.49).088/.085 (2.24/2.16) Ø.095/.091 (2.41/2.31) Ø.162/.158 (4.11/4.01) Ø.093/.089 (2.36/2.26) Ø.182/.178 (4.62/4.52) Cable Prep Dimensions for Slide prepped cable into contact, then solder cable braid to contact body. See Assembly Instruction Sheet AI85009 for complete termination instructions. Cable Prep Dimensions for Slide prepped cable into contact, then solder cable braid to contact body. See Assembly Instruction Sheet AI85010 for complete termination instructions..140 ±.010 (3.56 ± 0.25).005 (0.13) MIN BREAK EDGE.135 ±.010 (3.43 ± 0.25).005 (0.13) MIN BREAK EDGE 90º 90º PRE-TINNED CABLE BRAID.090 ±.010 (2.29 ± 0.25) PRE-TINNED CABLE BRAID.090 ±.010 (2.29 ± 0.25) 86

8 Datalink s for Series 791 Connectors Size #8 Differential Twinax s Differential twinax contacts accept 100 ohm shielded twisted pair cable. These snap-in, rearrelease contacts fit Glenair Series 79 connectors. Crimp termination. 24 and 26 AWG versions. Gold-plated copper alloy. Supplied unassembled with sealing boot and instruction sheet. Socket Operating temperature: -65 to +175 C Operating frequency 100 ohm versions: DC 3GHz Operating frequency 77 ohm versions: DC 20MHz Dielectric withstanding voltage, inner contact to inner contact: 1000 Vrms Dielectric withstanding voltage, inner contact to outer body: 500 Vrms Insulation resistance: 5000 megohms min. resistance, inner contacts: 55 millivolt max. voltage 1 ampere resistance, outer body: 75 millivolt max. voltage 12A Inner contacts, outer body: copper alloy, 50 Crimp ferrule: copper alloy, 50 Insulators: PPS Sealing boot: fluorosilicone rubber grommet, glass-filled PEI follower Size #8 Differential Twinax s Shielded Twisted Pair Cable Wire Size (AWG) Impedance (ohms) Socket GSC (Gore) F F 0024A0024 (TE Raychem) F F DXN2603 (Gore) F F M17/ F F Ø.276/.271 (7.01/6.88).218 (5.54) HEX CRIMP INNER CRIMP BUSHING Ø.276/.271 (7.01/6.88).218 (5.54) HEX CRIMP.900/.840 (22.9/21.3) (0.84/0.74).305/.295 (7.75/7.49) Socket /.840 (22.9/21.3) (0.84/0.74) (7.34/7.09) POLARIZATION KEY Ø.219/.217 Ø.316/.313 (5.56/5.51) (8.03/7.95) ø.0250 ±.0005 (0.64 ± 0.013) TWO PLACES Ø.316/.313 (8.03/7.95) POLARIZATION KEY Ø.288/.284 (7.32/7.21) SKT TO ACCEPT.025 (0.64) PIN 2 PLACES.111 (2.82).111 (2.82) Sealing Boot Sealing boots are supplied with contacts. To order contacts without sealing boots, delete the F suffix from the part number Part Number , Removal Tool Inner s Outer Body Removal Crimper Positioner Crimper Hex Die Tool (M22520/2-37) (M22520/5-45) Inner Outer Body Removal Tool.985 (25.02).350 (8.89).326 (8.28) (M22520/2-37) (M22520/5-45) 2018 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series

9 Datalink s for Series 791 Connectors Size #8 Quadrax s Socket Operating temperature: -65 to +175 C Operating frequency: DC 3 GHz Characteristic Impedance: 100 ±10 ohms Dielectric withstanding voltage, inner to inner contact: 1000 Vrms sea level, 250 Vrms 70,000 feet. Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, 250 Vrms 70,000 feet. resistance, inner contacts: 55 millivolt max. voltage 1 ampere resistance, outer body: 75 millivolt max. voltage 12A Insulation resistance: 5000 megohms min. resistance, inner contacts: 55 millivolt max. voltage 1 ampere resistance, outer body: 75 millivolt max. voltage 12A Inner contacts, outer body: copper alloy, 50 Crimp ferrule: copper alloy, 50 Insulators: PPS Sealing boot: fluorosilicone rubber grommet, glass-filled PEI follower Quadrax contacts are size 8 multi-pin contacts with four signal pins and an outer contact body. Crimp termination. Compatible with Glenair Series 79 connectors. Supplied as unassembled kit. Wire Size (AWG) Ø.276/.271 (7.01/6.88) Ø.276/.271 (7.01/6.88) Ref Cable Dia..160 (4.06).175 (4.45).137 (3.48) Size #8 100 Ohm Quadrax s Cable Accomodation Mfgr. Part Number PIC E51424 Gore GSC F Tensolite NF24Q Draka F PIC Tensolite PIC.920 (23.37) (0.84/0.74).305/.295 (7.75/7.49).218 (5.54) HEX CRIMP.218 (5.54) HEX CRIMP E50424 NF26Q E Socket /.840 (22.9/21.3).033 (0.84).029 (0.74) POLARIZATION KEY Ø.219/.217 (5.56/5.51) F F Ø.025 (0.64).111 (2.82) (PIN NO. DESIGNATION NOT MARKED ON PART) POLARIZATION KEY Ø.288/.284 (7.32/7.21) Ø.316/.313 (8.03/7.95) Ø.316/.313 (8.03/7.95) (7.34/7.09) SKT TO ACCEPT.025 (0.64) PIN 2 PLACES Socket F F F.111 (2.82) (PIN NO. DESIGNATION NOT MARKED ON PART) (2.82).111 (2.82) 3 2 Sealing Boot Sealing boots are supplied with contacts. To order contacts without sealing boots, delete the F suffix from the part number PN , Removal Tool Inner s Outer Body Removal Crimper Positioner Crimper Hex Die Tool (M22520/2-37) (M22520/5-45) Inner Outer Body Removal Tool.985 (25.02).350 (8.89).326 (8.28) (M22520/2-37) (M22520/5-45) Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series 791

10 Datalink s for Series 791 Connectors Size #8 El Ochito Octaxial s Socket The 10G Ethernet with Patented Data Pair Isolator Technology United States Patent Number 9,257,796 DC 4 GHz frequency range 100 ohms Data pair isolation technology 50% size and weight savings compared to quadrax contacts Operating temperature: -65 to +175 C Operating frequency: DC 4 GHz Nominal Impedance: 100 ohms Dielectric withstanding voltage, inner to inner contact: 1000 Vrms sea level, 250 Vrms 70,000 feet. Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, 250 Vrms 70,000 feet. Insulation resistance: 5000 megohms min. Vibration: MIL-DTL Series III Shock: MIL-DTL Series III Inner contacts, outer body: copper alloy, 50 Crimp ferrule: copper alloy, 50 Insulators: thermoplastic Sealing boot: fluorosilicone rubber grommet, glass-filled PEI follower El Ochito contacts are intended for harsh environment military and aerospace data networks utilizing 1000BASE-T or 10GBASE-T protocols. El Ochito contacts provide up to 50% total weight savings compared to quadrax-based solutions. These contacts have eight signal pins housed in a machined, gold plated outer contact. Crimp termination. Metal spline isolates data pairs for improved signal integrity. For use with aerospace-grade 26 AWG Category 6a cables with unshielded or shielded data pairs. El Ochito contacts snap into Series 791 connectors. Supplied as unassembled kit with outer body, (8) inner contacts, shield crimp ferrule, insulators, and instruction sheet. Cable Type S/UTP S/FTP PN F F F F Size #8 El Ochito Ethernet s for Series 791 Connectors Cable Cable Description Pin Unshielded twisted pairs Foil shields on individual twisted pairs Mfgr. Part Number PIC E6A3826 Gore RCN Glenair Part No. Socket F F F F, Removal Tool Inner s Outer Body Removal Crimper Positioner Crimper Hex Die Tool (K1906) (K1906) Sealing Boot (GS206) (M22520/5-45) (not required) Sealing boots are supplied with Ochito contacts. To order contacts without sealing boots, delete the F suffix from the part number..93 (23.6) Ø.370 (9.40) SEALING BOOT FOR OCHITO CONTACTS USING.220 (5.59) DIAMETER CABLE Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series

11 Datalink s for Series 791 Connectors Size #8 100 Ohm El Ochito Octaxial s Ochito Exploded View Dielectric Sleeve Socket s (8) Crimp Ferrule Dielectric Sleeve s (8) Crimp Ferrule Organizer Insulator Organizer Insulator Front Insulator Front Insulator Data Pair Isolator Data Pair Isolator Alignment Key Alignment Key Outer Body Outer Body Socket and El Ochito CABLE (REF) Ø.276/.271 (7.01/6.88).920 (23.37) SHIELD CRIMP :.231 (5.87) HEX :.265 (6.73) ROUND (0.84/0.74) POLARIZATION KEY Ø.219/.217 (5.56/5.51).305/.295 (7.75/7.49) Ø.316/.313 (8.03/7.95) (1.52) 6 5 PIN NO. DESIGNATION (NOT MARKED ON PART) El Ochito Socket CABLE (REF) Ø.276/.271 (7.01/6.88).975 (24.77) (0.84/0.74) SHIELD CRIMP :.231 (5.87) HEX :.265 (6.73) ROUND POLARIZATION KEY Ø.288/.284 (7.32/7.21) (7.34/7.09) Ø.316/.313 (8.03/7.95) (1.52) 5 6 PIN NO. DESIGNATION (NOT MARKED ON PART) Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series 791

12 Datalink s for Series 791 Connectors Size #12 Ultra-Fast Differential Twinax s for DC 10 GHz Frequency Range Glenair Ultra-Twinax differential twinax contacts are suited for multi-gigabit data rate applications such as CML, LVDS and other advanced digital communications protocols. Size # ohm contacts feature DC 10 GHz frequency range. Use with high-speed #30 AWG twisted pair cable These contacts are compatible with Glenair Series 791 connectors with size keyed #12 cavities Order connector with -688 suffix code to specify keyed cavities. Snap-in, rear release. Solder termination. Supplied as kit with body, front insulator-solder contact subassembly, and rear insulator. Features DC 10 GHz frequency range 100 ohm impedance Aerospace-grade construction Low insertion loss Applications LVDS SATA 3.0 DisplayPort CML Socket Cable (Glenair) Wire Size (AWG) Size #12 Ultra-Twinax s Impedance (ohms) Socket Assembly Instruction Sheet AI85051 Connector Compatibility Operating temperature: -650C to +1050C Operating frequency: 0 10 GHz Impedance: 100 ohms VSWR: (.03 X Freq GHz) Insertion loss : (.33 X Freq GHz) Dielectric withstanding voltage: 500 Vrms Insulation resistance: 5000 megohms min. Inner contacts, outer body: copper alloy, 50 Insulator: glass-filled PTFE Rear insulator: PPS Socket hood: stainless steel, passivated Compatible only with connectors with specially keyed size #12 insert cavities. To order keyed connectors, add modification code -688 to the part number per the following example: PH-10P4MES-688 Design Features Socket Design Features FRONT INSULATOR BODY REAR INSULATOR 30 AWG TWISTED PAIR CABLE HOOD BODY REAR INSULATOR 30 AWG TWISTED PAIR CABLE SOCKET CONTACTS SOLDER TERMINATIONS PIN CONTACTS FRONT INSULATOR SOLDER TERMINATIONS 2018 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series

13 Datalink s for Series 791 Connectors Size #12 Ultra-Fast Differential Twinax s for DC 10 GHz Frequency Range Socket ALIGNMENT KEY Ø.096 (2.44).560 (14.22).300/.296 Ø.182 (7.62/7.52) (4.62).040 (1.02) ALIGNMENT KEY.550 (13.97) Ø /.280 (7.37/7.11) (3.84) A B A B Ø.161 (4.09).025/.017 (0.64/0.43).040 (1.02).033/.030 (0.84/0.76) CAVITY IDENTIFICATION SHOWN FOR REFERENCE ONLY AND IS NOT MARKED ON CONTACT Ø.126 (3.20) Ø.151 (3.84) CAVITY IDENTIFICATION SHOWN FOR REFERENCE ONLY AND IS NOT MARKED ON CONTACT.033/.030 (0.84/0.76) Ø.188 (4.78) Ø.126 (3.20) VSWR Performance Data VSWR Insertion Loss s Only Cable Only (47 in.) Cable and s Frequency (GHz) Frequency (GHz) Insertion Loss (db) Conductors Insulation Inner shield Outer shield Jacket Temperature Rating Ohm Twisted Pair Cable 30 AWG silver-coated high strength copper alloy, 19/42 strand PFA, white and yellow,.032 dia..0015" aluminum/polyester tape Silver-coated 40 AWG braid, 90% minimum coverage PFA, black -65 to +105 C #40 AWG SILVER-COATED HIGH STRENGTH COPPER ALLOY BRAID Part Number ±.006 (2.72 ± 0.15) PFA INSULATION Impedance Capacitance DC resistance Attenuation (nominal) 100 ± 10 ohms 15.0 pf/ft (cond-cond) ohms/1000 ft. maximum MHz, 1 GHz PFA JACKET, BLACK.032 ±.002 (0.81 ± 0.05) #30 AWG 19/42 SILVER-COATED HIGH STRENGTH COPPER ALLOY Velocity of Propagation 80% Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series 791

14 Pneumatic s for Series 790 and 791 Connectors Size #12 Pneumatic s Stainless steel pneumatic contacts attach to 3/32 inch (2.38) diameter tubing. Compatible with all Series 79 and Series 80 Mighty Mouse connectors. Socket contact has o-ring and PTFE backup washers. s snap into size #12 connector cavities. Originally designed for pitot tube connections, these pneumatic contacts are rated for 100 PSI maximum air pressure. No installation tool is required. Remove contacts with plastic extraction tool. 100 psi Stainless steel Accepts 3/32 in. diameter tube Fits in standard #12 contact cavity Size #12 Pneumatic s Type Tube I.D. Socket Socket Pneumatic.094 (2.38) /.336 (8.64/8.53).975 (24.8) (0.83/0.74) Ø.050 Ø.094 (1.27) (2.39) Ø.079 (2.0) Ø.182/.179 (4.62/4.54) Ø.151/.148 Ø.135/.132 (3.43/3.35) Operating temperature: -65 to +200 C Maximum static air pressure 100 psi (6.8 bar)i Body: stainless steel, passivated O-ring: fluorosilicone Washers: PTFE Socket /.280 (7.32/7.11).975 (24.8) (0.83/0.74) Ø.086/.084 (2.18/2.13) Ø.160 (4.06) Ø.182/.179 (4.62/4.54) Ø.151/.148 Ø.135/.132 (3.43/3.35) 2018 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code Series