Through and Ground Conductor Terminal Blocks 290 Series
|
|
- Polly Neal
- 5 years ago
- Views:
Transcription
1 Through and Ground Conductor Terminal Blocks 290 Series mm"f-st" mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / in mm"f-st" mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / in mm"f-st" mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / in <_ mm/ in > <_ mm/ in > <_ mm/ in > (_ 32 mm/1.26 in _) < 3 mm/2.09 in (_ 32 mm/1.26 in _) < 64 mm/2.2 in ( 46, mm/1.8 in ) < 79 mm/3.11 in Through terminal block, 1 FIT CLAMP / 1 FIT CLAMP gray blue Through terminal block, 1 FIT CLAMP / 2 FIT CLAMP Through terminal block, 2 FIT CLAMP /2 FIT CLAMP gray gray blue blue Ground conductor terminal block, 1 FIT CLAMP / 1 FIT CLAMP green-yellow Item-Specific Accessories Ground conductor terminal block, 1 FIT CLAMP / 2 FIT CLAMP green-yellow Item-Specific Accessories Ground conductor terminal block, 2 FIT CLAMP /2 FIT CLAMP green-yellow Item-Specific Accessories End and intermediate plate, 1 mm thick orange (4x2) gray (4x2) End and intermediate plate, 1.1 mm thick orange (4x2) gray (4x2) End and intermediate plate, 1.1 mm thick orange (4x2) gray (4x2) 290 Series Accessories Adjacent jumper, insulated, I N = I N terminal block gray (8x2) yellow-green (8x2) Alternate jumper, insulated, I N = I N terminal block gray (4x2) Staggered jumper, 4 insulated, width mm/0.197 in, I N 24 A from 1 to (4x2) from 1 to (4x2) from 1 to (4x2) from 1 to (2x2) from 1 to (2x2) from 1 to (2x2) from 1 to (2x2) Push-in type wire jumper, 4 insulated, I N 9 A, wire size 0.7 mm L = 60 mm L = 110 mm L = 20 mm Test plug module, 4 can be snapped together, mm wide gray (4x2) Appropriate marking systems: WMB/WFB (see Section 13) Spacer module, can be snapped together, mm wide gray (4x2) B-type test plug module, 4 can be snapped together, mm wide gray (4x2) B-type spacer module, can be snapped together, mm wide gray (4x2) Test plug, with 00 mm cable, 2 mm red Test plug, with 00 mm cable, 2.3 mm yellow WMB Inline,, stretchable -.2 mm, 1,00 WMB markers, mm, on roll white WMB Multi marking system, 10 strips with 10 markers per card, stretchable -.2 mm WMB Multi marking system,, 10 strips with 10 markers per card, stretchable -.2 mm yellow / red / blue / gray / orange /000-0 light green / green / violet / Screwless end stop, for DIN 3 rail, 6 mm wide gray (4x2) Screwless end stop, for DIN 3 rail, 10 mm wide gray (2x2)
2 Through and Ground Conductor Terminal Blocks 290 Series mm 1 AWG 28- * mm 1 AWG 28- * mm"f-st" 2 AWG 22-16"f-st" mm"f-st" 2 AWG 22-16"f-st" mm"s" 2 AWG 22-18"s" mm"s" 2 AWG 22-18"s" 00 V/6 kv/3 3 I N 24 A / 13. A Terminal block width mm / in 00 V/6 kv/3 3 I N 24 A / 13. A Terminal block width mm / in <_ mm/ in > <_ mm/ in > (_ 32 mm/1.26 in _) < 3 mm/2.09 in (_ 32 mm/1.26 in _) < 64 mm/2.2 in Through terminal block, 1 CAGE CLAMP / 1 FIT CLAMP gray blue Ground terminal block, 1 CAGE CLAMP / 1 FIT CLAMP green-yellow Item-Specific Accessories End and intermediate plate, 1 mm thick orange (4x2) gray (4x2) Through terminal block, 1 CAGE CLAMP / 2 FIT CLAMP gray blue Ground terminal block, 1 CAGE CLAMP / 2 FIT CLAMP green-yellow Item-Specific Accessories 290 Series Accessories Appropriate marking systems: WMB/WFB (see Section 13) Insulation stop, Push-in type wire jumper, 6 pcs/strip, mm "s" (0.14 mm "f-st") 6 white (8x2) Insulation stop, 6 pcs/strip, mm light gray (8x2) Insulation stop, 6 pcs/strip, mm dark gray (8x2) Adjacent jumper, insulated, I N = I N terminal block Test plug module, 6 gray (8x2) yellow-green (8x2) Alternate jumper, insulated, I N = I N terminal block gray (4x2) Staggered jumper, 6 insulated, width mm/0.197 in, I N 24 A from 1 to (4x2) from 1 to (4x2) from 1 to (4x2) from 1 to (2x2) from 1 to (2x2) from 1 to (2x2) from 1 to (2x2) End and intermediate plate, 1.1 mm thick orange (4x2) gray (4x2) insulated, I N 9 A, wire size 0.7 mm L = 60 mm L = 110 mm L = 20 mm Protective warning marker, with high-voltage symbol, black, for terminal blocks yellow (4x2) can be snapped together, mm wide gray (4x2) Spacer module, can be snapped together, mm wide gray (4x2) Test plug, with 00 mm cable, 2 mm red Test plug, with 00 mm cable, 2.3 mm yellow WMB Inline,, stretchable -.2 mm, 1,00 WMB markers, mm, on roll white Series Accessories WMB Multi marking system, 10 strips with 10 markers per card, stretchable -.2 mm WMB Multi marking system,, 10 strips with 10 markers per card, stretchable -.2 mm yellow / red / blue / gray / orange /000-0 light green / green / violet / Screwless end stop, for DIN 3 rail, 6 mm wide gray (4x2) Screwless end stop, for DIN 3 rail, 10 mm wide gray (2x2)
3 $ Lighting and Service Connectors 224 Series " Installation side 1-2. mm "s" AWG 14 - Lighting side mm "s+f-st" AWG V/4 kv/2; 24 A 300 V, 20 Au2 L 9-11 mm / 0.39 in Installation side 1-2. mm "s" AWG 14 - Lighting side mm "s+f-st" AWG V/4 kv/2; 24 A 300 V, 20 Au2 L 9-11 mm / 0.39 in mm "s+f-st" 400 V/4 kv/2 I N 24 A L 9-11 mm / 0.39 in AWG V, 20 Au 481 Color Lighting connector, standard version, continuous service temperature 10C gray Color 2-conductor lighting connector, standard version, continuous service temperature 10C white Color "Service" connector gray Lighting connector, version for increased continuous service temperature of 0C black conductor lighting connector, version for increased continuous service temperature of 0C black Series Accessories Syringe, contents: 20 ml "Alu-Plus" contact paste (4x) press test <_ 1, _> test press test <_ 1, _> test <_ 1, _> test test 8, < 20, 8, < 20, > < 42 8,
4 482 $ Luminaire Disconnect Connectors (US Version Only) 873 Series 2-conductor plug 1 1-conductor socket 2 2-conductor plug 1 1-conductor socket 2 AWG 18 - "s" AWG 18 "s" AWG 18 - "s" AWG 18 "s" AWG 16 - "st" 600 V, 6 Ar AWG 16 - "st" 600 V, 6 Ar L mm / 0.47 in l 9-11 mm / 0.39 in 1 2 L mm / 0.47 in l 9-11 mm / 0.39 in conductor plug 2 1-conductor socket Pole No. Luminaire disconnect connector Pole No. Luminaire disconnect connector Touchproof connectors are required for ballast supply cables in the USA and Canada. When exchanging a ballast: 1. The touchproof plug-in connection is disconnected first 2. The ballast is replaced 3. Network connection is restored by plugging the connection. This streamlines ballast replacement while enhancing safety by safeguarding the installer from electric shock. The 873 Series connectors are approved according to UL 249 and CSA 22.2 for this type of application. 18 AWG CU, SOL, UL/CSA 0,7 4 mm 2 16 AWG ( 19 str.) CU, UL 14 AWG ( 19 str.) CU, CSA One-time use only Do not reuse 1, 4 mm 2 N utiliser qu une seule fois 0,7 mm 2 18 AWG CU, SOL, UL/CSA The 873 Series is approved to: EN mm 0. mm solid, 6A for female part 1. mm 4 mm solid, 32A for male part 400 V/4 kv/2 EN mm solid, 6A for female part 0.7 mm 4 mm solid, 32A for male part 400 V/4 kv/2 0.4 inch / mm 0.3 inch / 9 11 mm Correct method of solid wire removal Hold wire to be removed in one hand, the connector in the other twist slightly while pulling the connector. Déconnexion correcte du conducteur rigide Tenir d une main le conducteur à déconnecter et de l autre main le connecteur Opérer une légère torsion du conducteur tout en tirant sur le connecteur.
5 $ Luminaire Disconnect Connectors (US Version Only) 873 Series 2-conductor plug 1 1-conductor socket 2 AWG 18 - "s" AWG 18 "s" AWG 16 - "st" 600 V, 6 Ar L mm / 0.47 in l 9-11 mm / 0.39 in conductor plug 2 1-conductor socket Pole No. Luminaire disconnect connector, preceding ground contact in center position Touchproof connectors are required for ballast supply cables in the USA and Canada. When exchanging a ballast: 1. The touchproof plug-in connection is disconnected first 2. The ballast is replaced 3. Network connection is restored by plugging the connection. This streamlines ballast replacement while enhancing safety by safeguarding the installer from electric shock. The 873 Series connectors are approved according to UL 249 and CSA 22.2 for this type of application. 18 AWG CU, SOL, UL/CSA 0,7 4 mm 2 16 AWG ( 19 str.) CU, UL 14 AWG ( 19 str.) CU, CSA One-time use only Do not reuse 1, 4 mm 2 N utiliser qu une seule fois 0,7 mm 2 18 AWG CU, SOL, UL/CSA 873 Series approvals acc. to EN: EN mm 0. mm solid, 6A for female part 1. mm 4 mm solid, 32A for male part 400 V/4 kv/2 EN mm solid, 6A for female part 0.7 mm 4 mm solid, 32A for male part 400 V/4 kv/2 0.4 inch / mm 0.3 inch / 9 11 mm Correct method of solid wire removal Hold wire to be removed in one hand, the connector in the other twist slightly while pulling the connector. Déconnexion correcte du conducteur rigide Tenir d une main le conducteur à déconnecter et de l autre main le connecteur Opérer une légère torsion du conducteur tout en tirant sur le connecteur.
6 486 Power Supply Connectors With Two Snap-In Mounting Feet 294 Series Without Ground Contact With Direct Ground Contact With Screw-Type Ground Contact With Snap-In Ground Contact With Angled Snap- In Ground Contact Pole No. Marking 2 without N L N' L' DA DA N without N 3 L N' 3 L ' N without /L' 2/L 3 N N without L3 L2 L1 3 N L' N' L 3 N DA+ DA L 3 N DA N 3 L DA N Item numbers marked in blue are for stock items.
7 Power Supply Connectors Without Snap-In Mounting Feet 294 Series 487 Without Ground Contact With Direct Ground Contact With Screw-Type Ground Contact With Snap-In Ground Contact With Angled Snap- In Ground Contact Pole No. Marking 2 without N L N' L' DA DA N without N 3 L N' 3 L ' N without /L' 2/L 3 N N without L3 L2 L1 3 N L' N' L 3 N DA+ DA L 3 N DA N 3 L DA N without without
8 488 Power Supply Connectors 294 Series External connection of solid, stranded and fi ne-stranded connectors Universal conductor termination (AWG, metric) Third contact located at the bottom of internal connector end Strain relief plate can be retrofi tted Technical data Rating per IEC/EN IEC/EN Overvoltage category II II Pollution degree 2 2 Rated voltage 00 V 00 V Rated surge voltage 4 kv 4 kv Nominal current 24 A 24 A Temperature rating T 8 T 8 Conductor data (external connection): Connection technology CAGE CLAMP S Conductor size: solid, stranded or fi ne-stranded 2 x mm² Conductor size: with ferrule 2 x mm² AWG: solid 2 x 18 AWG: fi ne-stranded and stranded 2 x Strip length 8 9 mm / in Conductor data (internal connection): Connection technology PUSH WIRE Conductor entry 1 Conductor size: solid mm² Conductor size: fi ne-stranded mm² (with uninsulated ferrule) Conductor size: fi ne-stranded 0. 1 mm² (with insulated ferrule) AWG: solid Strip length 8 9 mm / in Internal connection Conductor entry 2 Conductor size: solid mm² Conductor size: fi ne-stranded 0. 1 mm² (with uninsulated ferrule) Conductor size: fi ne-stranded mm² (with insulated ferrule) AWG: solid Strip length 8 9 mm / in Conductor entry 3 Conductor size: solid mm² AWG: solid 18 Strip length 8 9 mm / in External connection Conductor entry Material data: Material group IIIa Insulating material Polycarbonate (PC) Temperature stability Relative temperature index (RTI) of C Flammability rating per UL 94 V0 Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu) Contact plating tin-plated 16 mm-high versions are available upon request.
9 Power Supply Connectors, 2-Pole 294 Series without ground contact! $ pole, white N-L N-L DA- DA N pole, white N-L N-L DA- DA N < 27,3 _ <13,9 > < 20 > >
10 490 Power Supply Connectors, 3-Pole 294 Series without ground contact with direct ground contact with screw-type ground contact 3-pole, white N-PE-L N-PE-L PE-N pole, white N-PE-L N-PE-L PE-N Terminal block for field connection with direct 3-pole, white N-PE-L N-PE-L PE-N Terminal block for field connection with screw-type 3-pole, white N-PE-L N-PE-L PE-N Terminal block for field connection with screw-type 3-pole, white N-PE-L N-PE-L PE-N < 27,3 _ >,2 < <13,9 > < 30 > < 27,3 _ <13,9 > < 30 > < 27,3 _ <13,9 > < 2 _ < 30 >
11 with snap-in ground contact with angled snap-in ground contact! $ 491 Terminal block for field connection with snap-in 3-pole, white N-PE-L N-PE-L PE-N Terminal block for field connection with angled snap-in with angled snap-in mounting feet, 3-pole, white N-PE-L N-PE-L PE-N Terminal block for field connection with snap-in 3-pole, white N-PE-L N-PE-L PE-N Terminal block for field connection with angled snap-in 3-pole, white N-PE-L N-PE-L PE-N Mounting of strain relief plate by simple insertion into the lighting connector, 294 Series. >,2 < 2,3 > < < 27,3 _ <13,9 > < 2 _ < 30 > < 27,3 _ <13,9 > < 2 _ < 30 >
12 492 Power Supply Connectors, 4-Pole 294 Series without ground contact with direct ground contact with screw-type ground contact 4-pole, white 1/L-2/L-PE-N PE-N pole, white 1/L-2/L-PE-N PE-N Terminal block for field connection with direct 4-pole, white 1/L-2/L-PE-N PE-N Terminal block for field connection with screw-type 4-pole, white 1/L-2/L-PE-N PE-N Terminal block for field connection with screw-type 4-pole, white 1/L-2/L-PE-N PE-N < 27,3 _ <13,9 > < 40 > < 27,3 _ >,2 < <13,9 > < 40 > < 27,3 _ <13,9 > < 2 _ < 40 >
13 with snap-in ground contact with angled snap-in ground contact! $ 493 Terminal block for field connection with snap-in 4-pole, white 1/L-2/L-PE-N PE-N Terminal block for field connection with angled snap-in 4-pole, white 1/L-2/L-PE-N PE-N Terminal block for field connection without snap-in 4-pole, white 1/L-2/L-PE-N PE-N Terminal block for field connection with angled snap-in 4-pole, white 1/L-2/L-PE-N PE-N >,2 < 2,3 > < < 27,3 _ <13,9 > < 2 _ < 40 > < 27,3 _ <13,9 > < 2 _ < 40 >
14 494 Power Supply Connectors, -Pole 294 Series without ground contact with direct ground contact with screw-type ground contact -pole, white L-N-L-PE-N L3-L2-L1-PE-N DA+ DA- L PE N DA- N PE L DA N-PE pole, white L-N-L-PE-N L3-L2-L1-PE-N DA+ DA- L PE N DA- N PE L DA N-PE Terminal block for field connection with direct -pole, white DA- N PE L DA N-PE Terminal block for field connection with screw-type -pole, white L-N-L-PE-N L3-L2-L1-PE-N DA+ DA- L PE N DA- N PE L DA N-PE Terminal block for field connection with screw-type -pole, white L-N-L-PE-N L3-L2-L1-PE-N DA+ DA- L PE N DA- N PE L DA N-PE < 27,3 _ <13,9 > < 0 > < 27,3 _ >,2 < <13,9 > < 0 > < 27,3 _ <13,9 > < 2 _ < 0 >
15 with snap-in ground contact with angled snap-in ground contact! $ 49 Terminal block for field connection with snap-in -pole, white L-N-L-PE-N L3-L2-L1-PE-N DA+ DA- L PE N DA- N PE L DA N-PE Terminal block for field connection with angled snap-in -pole, white L-N-L-PE-N L3-L2-L1-PE-N DA+ DA- L PE N DA- N PE L DA N-PE Terminal block for field connection with snap-in -pole, white L-N-L-PE-N L3-L2-L1-PE-N DA+ DA- L PE N DA- N PE L DA N-PE Terminal block for field connection with angled snap-in -pole, white L-N-L-PE-N L3-L2-L1-PE-N DA+ DA- L PE N DA- N PE L DA N-PE >,2 < 2,3 > < < 27,3 _ <13,9 > < 2 _ < 0 > < 27,3 _ <13,9 > < 2 _ < 0 >
16 496 Power Supply Connectors, 6- and 7-Pole 294 Series without ground contact without ground contact! $ 6-pole, white pole, white < 27,3 _ <13,9 > < 27,3 _ <13,9 > < 60 < 70
17 Tools and Strain Relief Plates Assembly tool Extraction tool Strain relief plate 497 Assembly tool, for pressing the snap-in mounting feet into the mounting plate and for safe and easy fitting of the ground contacts Extraction tool, suitable for removing conductors from PUSH WIRE contacts Strain relief plate, for multicore cable: 1 x outer diameter.2 - mm white Strain relief plate, for single strands: min. 3 x 0. mm, max. x 2. mm oder 7 x 1. mm white < 44,7 <_ 2,6 _> < 37,1 < 30 > ( 1,9 ) For removing a connected conductor. Slide the extraction tool beneath the conductor and pull out the conductor along with the extraction tool.
18 ) 00 Connection System with Phase Selection for Fluorescent Lighting Fixtures Power Supply Connectors 293 Series mm "s" 1 AWG "s" mm "s" 1 AWG "s" 2. mm "s" 2 AWG "s" 00 V/4 kv/2 3 I N 20 A L 8-9 mm / 0.33 in mm "s" 1 AWG "s" mm "s" 1 AWG "s" 2. mm "s" 2 AWG "s" 00 V/4 kv/2 3 I N 20 A L 8-9 mm / 0.33 in mm "s" 1 AWG "s" mm "s" 1 AWG "s" 2. mm "s" 2 AWG "s" 00 V/4 kv/2 3 I N 20 A L 8-9 mm / 0.33 in 4 Pole No. Terminal block for field connection with snap-in foot and direct white, with push-buttons on the field side Pole No. Terminal block for field connection with dovetail and without direct white, with push-buttons on the field side Pole No. Terminal block for field connection with snap-in mounting feet and direct white, with push-buttons on the field side without push-button without push-button without push-button < 40 < 40 ) 7,3 > 4,4< 2,8 > < < 23 < 30 < 40 <_ 13,7 _> < 4,3 > < 4,6 > N < 32,8 > 4,9 < > < 2,8 > < < 2 > 23,8 <_,6 _> Plate thickness: mm _> > 16,1 20,2 < < <_ 13,7 _> < 32,8 ( 30 ) ( 1,8 ) ( 1,6 ) < 2 > <_,6 _> < 16,1 > < 20,2 > <_ 13,7 _> < 4,3 > < 4,6 > < > 4,9 < > < > 4,4< 2,8 > < 2,8 > < > < 1 > 32,8 Ø 3, < < 20 > < 4, > _> > <_,6 _> < 16,1 < 20,2 Center of carrier rail Plate thickness: mm Metal plate cutout for direct ground contact must be free of varnish and oxide films. Equipped with varnished metal plates upon request. Metal plate cutout for direct ground contact must be free of varnish and oxide films. Equipped with varnished metal plates upon request.
19 mm "s" 1 AWG "s" mm "s" 1 AWG "s" 2. mm "s" 2 AWG "s" 00 V/4 kv/2 3 I N 20 A L 8-9 mm / 0.33 in 4 $ 01 Power supply connector with custom foot, with and without direct white, with and without push-buttons on the power supply side 1 Power supply side 2 Lighting side 3 00 V = rated voltage 4 kv = rated surge voltage 2 = pollution degree (also see Section 14) 4 Strip length, see packaging or instructions. Pole No. Terminal block for field connection (round conductor entry) with snap-in mounting feet and direct ground white, with push-buttons on the field side < 40 without push-button < 10 > < 40 Custom foot adjustment < 32,8 <_ 13,7 _> >4,3 < > 4,9 < > <_,6 _> < 16,1 _> < 20,2 < > 4,4 <_ 2,8 > < 32,8 > 4, < > 4,6< > < 2,8 > < Plate thickness: mm <_ 13,7 _> > 4,3 < > 4,9 < _> > <_,6 _> < 16,1 < 20,2 Metal plate cutout for direct ground contact must be free of varnish and oxide films. Equipped with varnished metal plates upon request. > < > Ø 3, < Center of carrier rail < 4,6 > 2,8 > < < 20 > Plate thickness: mm < 1 > Metal plate cutout for direct ground contact must be free of varnish and oxide films. Equipped with varnished metal plates upon request.
Operating tools. with partially insulated shaft Type 1, 2 and 3 in set
Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement
More informationELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks
ELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks 221 SERIES LEVER-NUTS The Next Generation of Compact Splicing Connectors 221 SERIES LEVER-NUTS The Difference is Clear:
More informationPOWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 )
POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 ) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s success.
More informationSwitching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay
relay - Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u); with miniature switching relay Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u);
More informationPOWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 )
POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 ) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s success.
More informationSLKK 5. Extract from the online catalog. Order No.:
Extract from the online catalog SLKK 5 Order No.: 0461018 Double-level terminal block with protective conductor foot, cross section: 0.2-4 mm², width: 6.2 mm, color: Gray Commercial data EAN 4017918002381
More informationHARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
More informationDIK 1,5 General data Technical data General
General data Order number 2715966 Type DIK 1,5 Barcode number 4017918061715 Unit pack 50 Pcs. Customs tariff 85369010000 Technical data General Number of levels 3 Number of connections 4 Color gray Insulating
More informationData sheet. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationWINSTA The Connection System. Full Line Catalog 2010/2011
WINSTA The Connection System Full Line Catalog 2010/2011 5 WAGO Registered Trademarks CAGE CLAMP CAGE CLAMP @ POWER CAGE CLAMP FIT CLAMP PUSH WIRE TOPJOB TOPJOB @ WINSTA WAGO X-COM X-COM @ JUMPFLEX TO-PASS
More informationMULTI CONNECTION SYSTEM. Product Overview
MULTI CONNECTION SYSTEM Product Overview THE ENTIRE RANGE OF MCS CONNECTORS MICRO Pin spacing: 2. mm Conductor sizes: 0.08 0. mm 2 (28 20 AWG) The Most Compact MCS MICRO Connector System with CAGE CLAMP
More informationGeneral data. Technical data DIKD 1,5. General. Dimensions
General data Order number 2715979 Type DIKD 1,5 Barcode number 4017918061722 Unit pack 50 Pcs. Customs tariff 85369010000 Technical data General Number of levels 3 Number of connections 6 Color gray Insulating
More information2 pole (1 NO + 1 NC) 1 NO + 1 NC 2 NO + 2 NC, 3 NO + 1 NC 4 NO + 2 NC Rated current / Max. peak current Rated load AC1
Features 7S.12...5110 7S.14...0220/0310 7S.16..0420 Relay module with forcibly guided contacts 7S.12 with 2 pole (1NO + 1 NC) 7S.14 with 4 pole (2 NO + 2 NC and 3 NO + 1 NC) 7S.16 with 6 pole (4 NO + 2
More informationData sheet. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationContents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES
Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................
More informationNo-wear isolation of potentials in terminal block design
TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly
More informationData sheet. W-Series WDU 4 BL
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationSpecifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21
M12 A-coding Specifications IEC 60 352-4 Approval A-coding acc. to IEC 61 076-2-101 Circular Connectors Technical characteristics M12 A-coding Type M12 A-coded HARAX M12-L 5 poles HARAX M12 L shielded
More informationHQ series the powerful little connectors
HQ series the powerful little connectors HQ series the powerful little connectors A small size ut quite ig. The electrical values speak for themselves. The HQs use the proven HE and HD crimp contacts as
More informationREMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350
REMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350 Productfeatures and advantages Reliable power connection solution for Electric vehicle batteries Battery chargers Forklift trucks Other DC voltage applications
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationPluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
More informationData sheet. W-Series WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationThe shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications.
The shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications. Shield (Screen) Connecting System VOLUME 1 Shield (screen) connecting system
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete
More informationIncandescent Lampholders: Edison Screw and Bayonet Cap
: Edison Screw and Bayonet Cap Table of Contents E14 22.223 22.230 E12 22.228 22.231 [08]..10 E17 E27 22.317 [08] 12 22.318 [08] 12, 13 2010-2012 This page is only valid in connection with the general
More informationHigh-current terminal block - UKH
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
More informationData sheet... W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationElectronic Circuit Breaker with reset input ESS20-1..
Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and
More informationFeed-through terminals
s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS
More informationgesis MINI 2, 3 and 5 pole
2 gesis MINI 2, 3 and 5 pole Application example General Electronic components become increasingly smaller. Consumer devices become smaller and the electrical connection must therefore become smaller,
More informationData sheet. M12 Jack X-coded IP67, field assembly. Illustrations P/N MMF881A315 EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification 8-pole M12 jack for field assembly Cat.6A per IEC/PAS 61076-2-109 suitable for 10 GBit
More informationHARTING Han GND. People Power Partnership
98 42 937 0201 HARTING Han GND People Power Partnership Han GND - Mateable Potential Equalization The new Han GND series now enables pluggable grounding systems Han GND (Han Ground) is the innovative HARTING
More informationboth pin and sleeve contacts.
The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick
More informationMCR-SL-CUC Universal current transducer. Data sheet _en_05. 1 Description
Universal current transducer Data sheet 104059_en_05 PHOENIX CONTACT 2011-03-09 1 Description MCR-SL-CUC-...-I and MCR-SL-CUC-...-U active current transducers convert DC, AC, and distorted currents into
More informationMedium-base Lampholders
Medium-base Lampholders For HID Lamps Medium-base lampholders Material: porcelain, white Nominal rating: 4A/250V/5kV pulse rated Terminals: bushings with set screws 18 14AWG solid Screw shell insert: zinc-plated
More informationThe series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties.
w TERMINALS SERIES IK6 GENERAL INFORMATION The series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties. 402 Since series terminals
More informationDatenblatt. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationSAC-5P- 1,5-PUR/M12FS SH
Extract from the online catalog SAC-5P- 1,5-PUR/M12FS SH Order No.: 1682935 Sensor/Actuator cable, 5-position, PUR, halogen-free, Black-gray RAL 7021, shielded, Free conductor end M12, on Socket, straight
More informationReflow Technology Product Overview
Reflow Technology Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.
More informationGeneral characteristics and technical data Series VarioPro Basic
General characteristics and technical data Series VarioPro Basic Series Electrical values Operating voltage (DC) Test voltage (DC) 8 kv 12 kv Housing HV- 1-2 Insulation material Flammability class POM
More informationREFLOW TECHNOLOGY. Product Overview
REFLOW TECHNOLOGY Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.
More informationSubject to changes 11/2003 Page 1/7
Main Characteristics: Zero switching. LED display. Various connection systems. Plug-in control terminal. Degree of protection IP 2. Double-insulated design. General Data: Standards / Approvals DIN EN 697--3
More informationCoupling unit CM-IVN For expansion of the insulation monitoring relay CM-IWN.x measuring range up to U n = 690 V AC and 1000 V DC
Data sheet Coupling unit CM-IVN For expansion of the insulation monitoring relay CM-IWN.x measuring range up to U n = 690 V AC and 1000 V DC The CM-IVN serves to extend the measuring range of the insulation
More informationLED Driver Compact fixed output. Udriver LC 25/30/35/40W 600/700/800/900mA fixc SC ADV ADVANCED series
Udriver LC 5/3/35/4W 6/7/8/9mA fixc SC ADV ADVANCED series Product description Fixed output LED Driver Can be either used build-in or independent with clip-on strain-relief (see accessory) Constant current
More informationElectronic Circuit Breaker ESS20-0..
Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode power supply. DC 4 V power supplies,
More informationSAC-3P- 5,0-PUR/M12FR SH
Extract from the online catalog SAC-3P- 5,0-PUR/M12FR SH Order No.: 1682838 Sensor/Actuator cable, 3-position, PUR, halogen-free, Black-gray RAL 7021, shielded, Free conductor end, on Socket, angled M12,
More informationDatenblatt. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More information60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
More informationCustomer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes.
Solutions for Customer Premise Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes. The product range of distribution boxes offers small distribution
More informationTools for crimp contacts
Tools for crimp termination D-Sub-S, D-Sub-HD, DIN 41 612 Identification Service crimp tool standard contacts high density contacts Part No. 09 99 000 0175 09 99 000 0596 HARTING- Crimp tool for 500 bandoliered
More informationPower Distribution Blocks with Short-Circuit Current Ratings
Power Distribution Blocks with Short-Circuit Current Ratings General Information: The requirements of the 005 National Electric Code (NEC) and UL508A now require many electrical panels to carry a Short
More informationProduct features and advantages
Product features and advantages Reliable power connection solution for Electric vehicle batteries Battery chargers Other DC voltage applications Operating voltage determined by housing color Simplifies
More informationMain catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions 10 5.2 mm m 0.205 in spacing 53 2.09" 26.7 1.05" 3 4 5 6 7 8 9 10 Save space by connecting s up to 4 mm2 (CB certified) 12 AWG in
More information[ 21.3 ] 0.84 A [ 13.0 ] 0.51
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
More informationThermistor motor protection relays
Thermistor motor protection relays Content Benefits and advantages... / 68 Selection table... / 68 Ordering details CM-MSE... / 69 CM-MSS... / 69 CM-MSN... / 7 PTC sensor C0... / 7 Technical data... /
More informationMicro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13
Micro Contactor Relays 10 Micro Contactors 11 Micro Contactors With Solder Pins 12 Coil voltages 12 Micro Reversing Contactor 13 Technical Data 14 Dimensions 18 D946E 9 Micro Contactor Relays 4-pole AC
More informationHARTING Han-Power T Solutions
HARTING Han-Power T Solutions Fields of Application HARTING industrial connectors are suitable in a wide variety of electronic and electrical applications. Power utilities Robotics Machine tool controls
More informationSBE 320 / SBX 350 Connectors - up to 350 Amps
Connectors - up to 350 Amps ORDERING INFORMATION SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. Sequencing within auxiliary positions
More informationSBE 160 / SBX 175 ORDERING INFORMATION SECTION 3. Touch Safe Interface Minimizes potential contact with live circuits per IEC & IEC 60529
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More information2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
More informationInsulation monitoring relay CM-IWS.1 For unearthed AC, DC and mixed AC/DC systems up to U n = 250 V AC and 300 V DC
Data sheet Insulation monitoring relay CM-IWS.1 For unearthed AC, DC and mixed AC/DC systems up to U n = 250 V AC and 300 V DC The CM-IWS.1 serves to monitor insulation resistance in accordance with IEC
More informationPower Electronics. POWERSWITCH Solid-State Contactor BF 9250, BH 9250
Power Electronics POWERSWITCH Solid-State Contactor, BH 9250 02342 According to IEC/E 60 947-4-2, IEC/E 60 947-4-3 1-, 2- and 3-pole models Load current up to 50 A For AC load up to 480 V Switching at
More informationMKDS 3/ 4. Extract from the online catalog. Order No.:
Extract from the online catalog MKDS 3/ 4 Order No.: 1711042 PC terminal block, Nominal current: 24 A, Nom. voltage: 400 V, Pitch: 5 mm, Number of positions: 4, Connection method: Screw connection, Mounting:
More informationSBE 80 / SBO 60 Connectors - up to 80 Amps
Connectors - up to 80 Amps SBE and SBO connectors build on the capability of the two pole SB connectors by offering up to 8 auxiliary power / signal contacts along with an IEC 60950 touch safe housing.
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationSectional Terminal Blocks
General Information: Sectionals are terminal blocks which are made up of individually molded units with electrically conductive members which, when assembled together, make up the block producing the required
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationSMKDSP 1,5/ 8. Extract from the online catalog. Order No.:
Extract from the online catalog SMKDSP 1,5/ 8 Order No.: 1733473 The figure shows a 10-position version of the product PC terminal block, Nominal current: 17.5 A, Nom. voltage: 250 V, Pitch: 5 mm, Number
More informationFRONT 2,5-H/SA 5. Extract from the online catalog. Order No.:
Extract from the online catalog FRONT 2,5-H/SA 5 Order No.: 1700008 PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of positions: 1, Type of connection: Screw connection,
More informationFeed-through terminal block - PT 10-TWIN
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationMeasuring current transformers of the W, W series
Measuring current transformers of the W, W -8000 series W(-8000)_D00078_01_D_XXEN/09.2015 Measuring current transformers of the W, W -8000 series Product description The highly sensitive W and W -8000
More informationAutomation and Network Solutions. Entertainment in Series Round Connectors by HIRSCHMANN.
Automation and Network Solutions Entertainment in Series Round Connectors by HIRSCHMANN. The competition is going to the very ends of the earth. For some time now, the best deals are no longer limited
More informationDatasheet. W-series terminal with clamping yoke connection WDU 16
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More information48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
More informationCoupling unit CM-IVN For expansion of the insulation monitoring relay CM-IWN.x measuring range up to U n = 690 V AC and 1000 V DC
Data sheet Coupling unit CM-IVN For expansion of the insulation monitoring relay CM-IWN.x measuring range up to U n = 690 V AC and 1000 V DC The CM-IVN serves to extend the measuring range of the insulation
More informationData sheet. M12 field plug X-coded, straight. Illustrations P/N MNF881A EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification M12 Cat.6A X-coded plug based on IEC PAS 61076-2-109 and suitable for field assembly
More informationTerminal blocks Index
Terminal Index - Terminal SNK terminal....1.72 General information Features and benefits...1 -.3...4 Marking solutions...5 Panorama...6 -.7 Ordering details ZS4 Screw terminal...8 ZS6 Screw terminal...9
More informationMKKDSH 3/ 2. Extract from the online catalog. Order No.:
Extract from the online catalog MKKDSH 3/ 2 Order No.: 1721045 The illustration shows a 2-position version PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of positions:
More informationSockets. SU Series: DIN Rail Snap-Mount Sockets. F-6 USA: (800) 262-IDEC or (408) , Canada: (888) 317-IDEC ➀➁➄➅ ➁➂➃➄
SU Series: DIN Rail Snap-Mount SU Series: DIN Rail Snap-Mount SUS-L SUS-L -blade DIN-mount/surface mount -blade DIN-mount/surface mount Spring clamp terminals Spring clamp terminals - AWG - AWG 0A A (using
More informationSwitching power supplies CP range, Linear power supplies CP-L range. Content
CP range, Linear power supplies CP-L range Content Switching power supplies, primary switch mode, CP range Benefits and advantages... 136 Approvals... 137 Ordering details... 138 Technical data... 11 Dimensional
More informationSPRING CLAMP TERMINAL
SPRING CLAMP TERMINAL Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-4132 Muttenz 1, Switzerland Phone ++41 (0)61 466 33 33, Fax ++41 (0)61 461 96 06 www.woertz.ch Woertz USA 151 Discovery Drive, Unit
More information78-Way D-type Connector Accessories
-Way D-type onnector Accessories 0-00D y Standard Voltage to V A/0V, A y Mating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed ompatibility The Standard Voltage -Way D-Type
More informationPHOENIX CONTACT
Electronic circuit breaker CLIPLINE Data sheet 102898_en_03 PHOENIX CONTACT 2010-12-17 1 Description The electronic circuit breaker can be used in applications that cover all aspects of the switched-mode
More information2 or 4 pole changeover contact Plug-in/Faston 187
56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free
More informationTechnical data. Contact material: with double break or 2 NC contacts Switching system: A IEC snap action with positive break NC contacts
Emergency pull-wire switches ZS 71... NA Technical data Contact variations * 63 mm for version 200 N pre-tensioning force To EN 418/IEC 60947-5-5 Metal enclosure 2 contacts Integrated emergency-stop button
More informationData sheet C6 A modul K 90 jack - keystone style
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: Keystone, 90 cable feed solid,
More informationDOWNLIGHT LED SERIES INSTALLATION INSTRUCTIONS
WARNING: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Make sure all
More informationSignal converter for electromagnetic flowmeters
Quick Start Signal converter for electromagnetic flowmeters Electronic revision: ER 3.0.xx The documentation is only complete when used in combination with the relevant documentation for the flow sensor.
More informationLED Driver Constant voltage
Driver LCU 60W 12/24V IP20 EXC excite series Product description LED Driver Universal input voltage range Constant output voltage Push terminals for simple wiring Nominal life-time up to 50,000 h (at ta
More informationRelays and associated toroids
Relays and associated toroids Residual-current protection relay Multi 9 format (DIN rail mount) E92034 E92035 E92036 RH10M. RH21M. RH99M. Multi 9 format (with mounting accessories (1) ) E90249 E90251 E90253
More informationRelay interface modules A
4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter
More informationMale Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
More informationData sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC 11801
More information