9-Pin D-type Connection Accessories

Transcription

1 -Pin D-type onnection Accessories 0-00D y Standard Voltage and alibration Port Solutions y Standard Voltage to 0V A/00V, A y ating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed ompatibility y -Pin High Voltage Solutions are also Available See Data Sheet 0-00HVD The Standard Voltage -Pin D-Type connector is used on PXI and LXI switching products to provide a standard density, low pin count, A connector solution. It is also used as the alibration Port connector for Precision resistor modules. onnector to onnector cable assemblies provide a simple way of connecting the product to the user s remote matching connection. onnectors to unterminated solutions allow the user to connect directly to the product connector and wire directly into a remote UUT. able assemblies are offered in various lengths to match most user requirements. or unterminated versions of cables we offer options based on the use of boot lace ferrules, tinned copper ends or simple cut ends to suit user termination requirements. or users wishing to develop their own cabling solutions, we offer mating connectors and connector hoods which allow users to create either their own cable based solutions, or a PB header solution. onnector Blocks directly terminate the module connector and convert the connection to arrays of screw terminal blocks, or users can select to use a remote breakout to terminate the cables at the end of a cable assembly. Pickering Interfaces can manufacture custom connector accessories to suit any application, if you do not see what you need then contact your Pickering Interfaces sales office with information on your requirements and let us solve your connection problems. Issue. June 01 Page 1

2 ontents - ating Accessories for Pickering Products Standard Voltage - able Assemblies View Description End 1 End Page able Assy, -Pin D-Type, A, 0.m, 1m and m Page ustom lengths by quotation Page able Assy, -Pin D-Type to Unterminated, A, 0.m, 1m and m ustom lengths by quotation Unterminated with Options Page Standard Voltage - onnector Blocks/onnectors View Description Type Page onnector Block, -Pin D-Type, A, Screw Terminal. With or Without Backshell Page able onnector -Pin D-Type, A, Solder Bucket With or Without Backshell Page Right Angle PB ount Page PB onnector -Pin D-Type, A Straight PB ount Page 10 Standard Voltage - Pcb onnectors View Description Type Page Right Angle PB ount Page 11 PB onnector -Pin D-Type, A Straight PB ount Page 1 Standard Voltage - alibration ables View And Description End 1 End Page 1 x -Pin D-Type able Assy, -Pin D-Type onnector(s), to x mm D Bayonet Plug. x -Pin D-Type x -Pin D-Type x mm D Bayonet Plug Page 1 Please click on the page number to navigate to the data sheet page required. Return to this page via the button. Page

3 ontents - Additional Accessories Although these items do not directly mate with Pickering Interfaces products customers may find them useful in the development of their own connection solutions. Standard Voltage - able Assemblies View Description End 1 End Page able Assy, -Pin D-Type, A, 0.m, 1m and m Page 1 ustom lengths by quotation able Assy, -Pin D-Type to Unterminated, A, 0.m, 1m and m ustom lengths by quotation Unterminated with Options Page 1 Standard Voltage - onnector Blocks/onnectors View Description Type Page onnector Block, -Pin D-Type, A, Screw Terminal. With or Without Backshell Page 1 able onnector -Pin D-Type, A, Solder Bucket With or Without Backshell Page 1 ustom Termination Page 1 Appendix - Product Part Number Listing Page 0 Page

4 Standard Voltage -Pin D-Type able Assy - to y High Specification able y Highly lexible able with Braided Sleeving y Degree able Exit y Strain Relief y ully Screened able onstruction Towards able Exit Options Away from 0mm inimum cabinet door closure allowance for cable bend onnector Type (): Securing ethod -Pin D-Subminiature -0 UN screwlocks, male onnector Type (): Securing ethod -Pin D-Subminiature -0 UN screwlocks, male 0., 1 or metres (as specified) haracteristic Plots for m- able Assembly Rating: aximum urrent aximum Voltage Insulation Resistance onnectors: ontact aterial ontact Resistance able Exit: onnectors onnectors able Type: onductor: aterial Strands Resistance Insulation Outer Sleeve Screened onstruction Additional Braided Sleeve able O/D inimum Bend Radius Door losure Allowance A 0VA/00VD 1000Ohm <0mOhm (Away from ) (Towards ) H x W1 x Dmm Individual wires, screened & sleeved Tinned copper wire 1/0.1 (0.mm, 1AWG) 0.01Ω/m PA Polyester mm mm 0mm (see diagram) Notes: Other cable lengths can be supplied. The top graph shows the permitted ΣI versus ambient temperature in accordance with EN1010 for user exposure to surface temperature and a higher limit imposed by the materials used where the cable is not directly user accessible. The bottom graph shows the allowed current versus temperature assuming ALL wires carry the same current. Higher currents to the cable rating are permitted on individual wires provided the ΣI is complied with. Product Order odes -Pin D-Type able Assy, A, to 0.m Long m- 1.0m Long m-.0m Long m- Page

5 Standard Voltage -Pin D-Type able Assy - to y High Specification able y Highly lexible able with Braided Sleeving y Degree able Exit y Strain Relief y ully Screened able onstruction able Exit Away from 0mm inimum cabinet door closure allowance for cable bend 0., 1 or metres (as specified) haracteristic Plots for m- onnector Type (): Securing ethod onnector Type (): Securing ethod able Assembly Rating: aximum urrent aximum Voltage Insulation Resistance onnectors: ontact aterial ontact Resistance able Exit able Type: onductor: aterial Strands Resistance Insulation Outer Sleeve Screened onstruction Additional Braided Sleeve able O/D inimum Bend Radius Door losure Allowance -Pin D-Subminiature -0 UN screwlocks, male -Pin D-Subminiature -0 UN screwlocks, male A 0VA/00VD 1000Ohm <0mOhm (Away from ) H x W1 x Dmm Individual wires, screened & sleeved Tinned copper wire 1/0.1 (0.mm, 1AWG) 0.01Ω/m PA Polyester mm mm 0mm (see diagram) Notes: Other cable lengths can be supplied. The top graph shows the permitted ΣI versus ambient temperature in accordance with EN1010 for user exposure to surface temperature and a higher limit imposed by the materials used where the cable is not directly user accessible. The bottom graph shows the allowed current versus temperature assuming ALL wires carry the same current. Higher currents to the cable rating are permitted on individual wires provided the ΣI is complied with. Product Order odes -Pin D-Type able Assy, A, to 0.m Long m- 1.0m Long m-.0m Long m- Page

6 Standard Voltage -Pin D-Type able Assy - to Unterminated y High Specification able y Highly lexible able y ully Screened able onstruction with Braided Sleeve and Strain Relief y ully oded arkers to Ensure Easy onnection y Boot Lace errule Option to Prevent Wire Strand Breakage Options errules Dia as Sleeve mm Nom Soldered or rimped onstruction Tinned End Dia as Tinned Wire mm Nom ut End Simple ut able Exit Away from Separate ores haracteristic Plots for m-U 0mm inimum cabinet door closure allowance for cable bend 0., 1 or metres (as specified) onnector Type (): Securing ethod Unterminated End (): ree Wire Length Individual Wire Labelling Wire End Options able Assembly Rating: aximum urrent aximum Voltage Insulation Resistance onnector: ontact aterial ontact Resistance able Exit able Type: onductor: aterial Strands Resistance Insulation Outer Sleeve Screened onstruction Additional Braided Sleeve able O/D inimum Bend Radius Door losure Allowance -Pin D-Subminiature -0 UN screwlocks, male 10mm nominal To connector pins errules, Tinned, ut End A 0VA/00VD 1000Ohm <0mOhm (Away from ) H x W1 x Dmm Individual wires, screened & sleeved Tinned copper wire 1/0.1 (0.mm, 1AWG) 0.01Ω/m PA Polyester mm mm 0mm (see diagram) Notes: Other cable lengths can be supplied. able strain relief arrangements may be necessary and appropriate electrical safety precautions should be observed. Product Order odes -Pin D-Type able Assy, A, Boot Lace errules, to Unterminated, 0.m Lg m-U to Unterminated, 1.0m Lg m-U to Unterminated,.0m Lg m-fU The top graph shows the permitted ΣI versus ambient temperature in accordance with EN1010 for user exposure to surface temperature and a higher limit imposed by the materials used where the cable is not directly user accessible. The bottom graph shows the allowed current versus temperature assuming ALL wires carry the same current. Higher currents to the cable rating are permitted on individual wires provided the ΣI is complied with. Part numbers for other versions: : T = Tinned End = ut End A00D-*-0A*** able Length: 00 = 0.m 100 = 1.0m 00 =.0m Page

7 Standard Voltage -Pin D-Type onnector Block - y onnector and PB Only or onnector, PB and Backshell y Screwlocks y able lamp in Backshell y Easy to Use Rising age Screw Terminals onnector blocks provide a convenient method of termination without the use of custom cabling. However, a higher resistance path, lower capacity ratings and lower voltage ratings are typical. Suitable for use on the front of modules this connector block provides a simple method of connecting to -Pin D-Type connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. PTE cables are recommended for use with this connector block to maximise copper cross-sectional area and insulation properties. onnector blocks have higher losses than a cable connection and the breakdown voltage is controlled by clearances to the metal shell. The metal shell includes an internal insulation barrier under the carrier board. When the product is used without a backshell users should make their own cable strain relief arrangements and ensure appropriate electrical safety precautions are observed. OR onnector Type (): Securing ethod: Product with Backshell Product without Backshell Wire onnection (): onnection ethod -Pin D-Subminiature -0 UN screwlocks, male -0 UN screwlocks, male Rising cage screw terminals - Terminals onnector Block Ratings: aximum urrent aximum Voltage able Exit -Pin D-Sub: ontact aterial ontact Resistance Screw Terminals: aximum Wire Size Recommended Insulation Additional able lamp A 00VD Rear - 10 x.mm H. x W1. x D1mm <0mOhm 0AWG PTE (in backshell) Product Order odes -Pin D-Type Shielded onnector Block, A, Screw Terminal, With Backshell, Without Backshell, Page

8 Standard Voltage -Pin D-Type onnector - y onnector only or onnector and Backshell y able lamp in Backshell y Soldered able Termination This accessory is designed to allow users to directly terminate with soldered connections to the connector. onnector and shell are supplied separately to allow the user to determine the direction of the cable exit. When the product is used without a backshell users should make their own cable strain relief arrangements and ensure appropriate electrical safety precautions are observed. Internal Solder onnection onnector Type (): Securing ethod: Product with Backshell Product without Backshell -Pin D-Subminiature -0 UN screwlocks, male -0 UN screwlocks, male Towards able Exit Options Away from Wire onnection (): onnection ethod onnector Ratings: aximum urrent aximum Voltage able Exit: able Exit Size -Pin D-Sub: ontact aterial ontact Resistance Wire onnection: aximum Wire Size Recommended Insulation Additional able lamp Solder bucket A 0VA 1mm dia H x W1 x Dmm <0mOhm 0AWG PA (in backshell) Product Order odes -Pin D-Type onnector, A, Solder Bucket, With Backshell, Without Backshell, Page

9 Standard Voltage -Pin D-Type onnector - y Right Angle PB ount y Ideal for User reated Termination Solutions This accessory allows a user to create their own PB based termination solution mounted on the end of a cable. Suitable cables for this product are contained elsewhere in this data sheet. Interfacing PBs should be designed with suitable clearances for the voltage the application requires. Note: This product is not suitable for directly mounting onto the front panel of a Pickering switching product. Ø 0.1 (.1) (x) 0. (1.0) (.) 0.10 (.) Typ 0.0 (1.) 0.11 (.) Typ 0.1 (.11) Ø 0.0 (1.1) (x) onnector Type (): Securing ethod PB onnection (): onnection ethod ounting onnector Ratings: aximum urrent aximum Voltage -Pin D-Sub: ontact aterial ontact Resistance PB Legs: Effective Leg Length -Pin D-Subminiature -0 UN screwlocks, female Solder Right angle PB mount A each pin 0VA Effective Leg Length <0mOhm.1mm nom (See diagram) ating ace of onnector this side of footprint PB ootprint of -Pin Right Angle onnector (onnector Side - Not to Scale).1mm Lengthnom Product Order odes -Pin D-Type onnector, A, Right Angle PB ount R Page

10 Standard Voltage -Pin D-Type onnector - y Straight PB ount y Ideal for User reated Termination Solutions This accessory allows a user to create their own PB based termination solution mounted on the end of a cable. Suitable cables for this product are contained elsewhere in this data sheet. Interfacing PBs should be designed with suitable clearances for the voltage the application requires. Note: This product is not suitable for directly mounting onto the front panel of a Pickering switching product. Ø 0.1 (.1) (x) 0. (1.0) (.) 0.10 (.) Typ 0.0 (1.) 0.11 (.) Typ 0.1 (.11) Ø 0.0 (1.1) (x) onnector Type (): Securing ethod PB onnection (): onnection ethod ounting onnector Ratings: aximum urrent aximum Voltage -Pin D-Sub: ontact aterial ontact Resistance PB Legs: Effective Leg Length -Pin D-Subminiature -0 UN screwlocks, female Solder Straight PB mount A each pin 0VA <0mOhm.0mm nom (See diagram) Leg Length PB ootprint of -Pin Straight onnector (onnector Side - Not to Scale).0mm Length nom Product Order odes -Pin D-Type onnector, A, Straight PB ount S Page 10

11 Standard Voltage -Pin D-Type onnector - y Right Angle PB ount y Ideal for User reated Termination Solutions This accessory allows a user to create their own PB based termination solution mounted on the end of a cable. Suitable cables for this product are contained elsewhere in this data sheet. Interfacing PBs should be designed with suitable clearances for the voltage the application requires. Note: This product is not suitable for directly mounting onto the front panel of a Pickering switching product. Ø 0.1 (.1) (x) 0. (1.0) (.) 0.10 (.) Typ 0.0 (1.) 0.11 (.) Typ 0.1 (.11) Ø 0.0 (1.1) (x) ating ace of onnector this side of footprint PB ootprint of -Pin Right Angle onnector (onnector Side - Not to Scale) onnector Type (): Securing ethod PB onnection (): onnection ethod ounting onnector Ratings: aximum urrent aximum Voltage -Pin D-Sub: ontact aterial ontact Resistance PB Legs: Effective Leg Length -Pin D-Subminiature -0 UN screwlocks, female Solder Right angle PB mount A each pin 0VA Effective Leg Length <0mOhm.1mm nom (See diagram).1mm Lengthnom Product Order odes -Pin D-Type onnector, A, Right Angle PB ount R Page 11

12 Standard Voltage -Pin D-Type onnector - y Straight PB ount y Ideal for User reated Termination Solutions This accessory allows a user to create their own PB based termination solution mounted on the end of a cable. Suitable cables for this product are contained elsewhere in this data sheet. Interfacing PBs should be designed with suitable clearances for the voltage the application requires. Note: This product is not suitable for directly mounting onto the front panel of a Pickering switching product. Ø 0.1 (.1) (x) 0. (1.0) (.) 0.10 (.) Typ 0.0 (1.) 0.11 (.) Typ 0.1 (.11) Ø 0.0 (1.1) (x) PB ootprint of -Pin Straight onnector (onnector Side - Not to Scale) onnector Type (): Securing ethod PB onnection (): onnection ethod ounting onnector Ratings: aximum urrent aximum Voltage -Pin D-Sub: ontact aterial ontact Resistance PB Legs: Effective Leg Length.0mm Length nom -Pin D-Subminiature -0 UN screwlocks, female Solder Straight PB mount A each pin 0VA <0mOhm.0mm nom (See diagram) Leg Length Product Order odes -Pin D-Type onnector, A, Straight PB ount S Page 1

13 odule Specific alibration Port able - Precision Resistor odules y High Specification able y Stranded Hi-lex PV able y Strain Relief y Braided Sleeving y ully Screened able onstruction The cable assembly is specifically designed to connect to the -Pin D-Type calibration port located on the front panel of Pickering Interfaces odule Part Numbers 0-0, 0-1, 0- and 0-. Three product types are available. Towards able Exit Options Away from mm inimum cabinet door closure allowance for cable bend SL SL Other versions adjacent. onnector Type (): Securing ethod ontact aterial ontact Resistance able Exit onnector Type (): Securing ethod ontact aterial ontact Resistance able Exit able Assembly Rating: aximum urrent aximum Voltage Insulation Resistance able Type: onductor: aterial Strands Resistance Insulation Outer Sleeve Screened onstruction Additional Braided Sleeve able O/D inimum Bend Radius Door losure Allowance Notes: Other cable lengths can be supplied SL1 -Pin D-Subminiature -0 UN screwlocks, male <0mOhm (Away from ) H x W1 x Dmm x mm D Bayonet Plug Push fit <0mOhm Rear 0 x.mm dia A 0V 1000Ohm Stranded Hi-lex PV Tinned copper wire /0.0 (1.0mm, 1AWG) - PV Polyester No mm 10mm mm (see diagram) Product Order odes SL1-1 metre max SL 1. metre max SL 1. metre max 1 x -Pin D-Type connector, to x mm D Bayonet Plug SL1 x -Pin D-Type connector, to x mm D Bayonet Plug SL x -Pin D-Type connector, to x mm D Bayonet Plug SL Page 1

14 Additional onnection Accessories Although these items do not directly mate with Pickering Interfaces products customers may find them useful in the development of their own connection solutions. Page 1

15 Standard Voltage -Pin D-Type able Assy - to This able Assembly is Not Suitable for onnection to a Pickering Switching Product y High Specification able y Highly lexible able with Braided Sleeving y Degree able Exit y Strain Relief y ully Screened able onstruction able Exit Towards 0mm inimum cabinet door closure allowance for cable bend 0., 1 or metres (as specified) haracteristic Plots for m- onnector Type (): Securing ethod onnector Type (): Securing ethod able Assembly Rating: aximum urrent aximum Voltage Insulation Resistance onnectors: ontact aterial ontact Resistance able Exit able Type: onductor: aterial Strands Resistance Insulation Outer Sleeve Screened onstruction Additional Braided Sleeve able O/D inimum Bend Radius Door losure Allowance Notes: Other cable lengths can be supplied. -Pin D-Subminiature -0 UN screwlocks, male -Pin D-Subminiature -0 UN screwlocks, male A 0VA/00VD 1000Ohm <0mOhm (Towards ) H x W1 x Dmm Individual wires, screened & sleeved Tinned copper wire 1/0.1 (0.mm, 1AWG) 0.01Ω/m PA Polyester mm mm 0mm (see diagram) The top graph shows the permitted ΣI versus ambient temperature in accordance with EN1010 for user exposure to surface temperature and a higher limit imposed by the materials used where the cable is not directly user accessible. The bottom graph shows the allowed current versus temperature assuming ALL wires carry the same current. Higher currents to the cable rating are permitted on individual wires provided the ΣI is complied with. Product Order odes -Pin D-Type able Assy, A, to 0.m Long m- 1.0m Long m-.0m Long m- Page 1

16 Standard Voltage -Pin D-Type able Assy - to Unterminated This able Assembly is Not Suitable for onnection to a Pickering Switching Product y High Specification and Highly lexible able y ully Screened able onstruction with Braided Sleeve and Strain Relief y ully oded arkers to Ensure Easy onnection y Boot Lace errule Option to Prevent Wire Strand Breakage Options errules Dia as Sleeve mm Nom Soldered or rimped onstruction Tinned End Dia as Tinned Wire mm Nom ut End Simple ut able Exit Towards Separate ores haracteristic Plots for m 0mm inimum cabinet door closure allowance for cable bend 0., 1 or metres (as specified) onnector Type (): Securing ethod Unterminated End (): ree Wire Length Individual Wire Labelling Wire End Options able Assembly Rating: aximum urrent aximum Voltage Insulation Resistance onnector: ontact aterial ontact Resistance able Exit able Type: onductor: aterial Strands Resistance Insulation Outer Sleeve Screened onstruction Additional Braided Sleeve able O/D inimum Bend Radius Door losure Allowance -Pin D-Subminiature -0 UN screwlocks, male 10mm nominal To connector pins errules, Tinned, ut End A 0VA/00VD 1000Ohm <0mOhm (Towards ) H x W1 x Dmm Individual wires, screened & sleeved Tinned copper wire 1/0.1 (0.mm, 1AWG) 0.01Ω/m PA Polyester mm mm 0mm (see diagram) Notes: Other cable lengths can be supplied. able strain relief arrangements may be necessary and appropriate electrical safety precautions should be observed. Product Order odes -Pin D-Type able Assy, A, Boot Lace errules, to Unterminated, 0.m Long m-U to Unterminated, 1.0m Long m-U to Unterminated,.0m Long m-U The top graph shows the permitted ΣI versus ambient temperature in accordance with EN1010 for user exposure to surface temperature and a higher limit imposed by the materials used where the cable is not directly user accessible. The bottom graph shows the allowed current versus temperature assuming ALL wires carry the same current. Higher currents to the cable rating are permitted on individual wires provided the ΣI is complied with. Part numbers for other versions: : T = Tinned End = ut End A00D-*-0A*** able Length: 00 = 0.m 100 = 1.0m 00 =.0m Page 1

17 Standard Voltage -Pin D-Type onnector Block - This onnector Block is Not Suitable for onnection to a Pickering Switching Product y onnector and PB Only or onnector, PB and Backshell y Screwlocks y able lamp in Backshell y Easy to Use Rising age Screw Terminals onnector blocks provide a convenient method of termination without the use of custom cabling. However, a higher resistance path, lower capacity ratings and lower voltage ratings are typical. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. PTE cables are recommended for use with this connector block to maximise copper cross-sectional area and insulation properties. onnector blocks have higher losses than a cable connection and the breakdown voltage is controlled by clearances to the metal shell. The metal shell includes an internal insulation barrier under the carrier board. When the product is used without a backshell users should make their own cable strain relief arrangements and ensure appropriate electrical safety precautions are observed. OR onnector Type (): Securing ethod: Product with Backshell Product without Backshell Wire onnection (): onnection ethod -Pin D-Subminiature -0 UN screwlocks, male -0 UN screwlocks, male Rising cage screw terminals - Terminals onnector Block Ratings: aximum urrent aximum Voltage able Exit -Pin D-Sub: ontact aterial ontact Resistance Screw Terminals: aximum Wire Size Recommended Insulation Additional able lamp A 00VD Rear - 10 x.mm H. x W1. x D1mm <0mOhm 0AWG PTE (in backshell) Product Order odes -Pin D-Type Shielded onnector Block, A, Screw Terminal, With Backshell, Without Backshell, Page 1

18 y onnector only or onnector and Backshell y able lamp in Backshell y Soldered able Termination Standard Voltage -Pin D-Type onnector - This onnector is Not Suitable for onnection to a Pickering Switching Product This accessory is designed to allow users to directly terminate with soldered connections to the connector. onnector and shell are supplied separately to allow the user to determine the direction of the cable exit. When the product is used without a backshell users should make their own cable strain relief arrangements and ensure appropriate electrical safety precautions are observed. Internal Solder onnection Towards able Exit Options Away from onnector Type (): Securing ethod: Product with Backshell Product without Backshell Wire onnection (): onnection ethod onnector Ratings: aximum urrent aximum Voltage able Exit: able Exit Size -Pin D-Sub: ontact aterial ontact Resistance Wire onnection: aximum Wire Size Recommended Insulation Additional able lamp -Pin D-Subminiature -0 UN screwlocks, male -0 UN screwlocks, male Solder bucket A 0VA 1mm dia H x W1 x Dmm <0mOhm 0AWG PA (in backshell) Product Order odes -Pin D-Type onnector, A, Solder Bucket, With Backshell, Without Backshell, Page 1

19 ustom Termination Pickering Interfaces are able to manufacture custom built cable assemblies and backshells that mate with all the connectors we use in our extensive product range and to provide connection solutions for third party products. We are able to model and manufacture cable assemblies and other termination arrangements to user notes and drawings, and to deal with simple and complex assemblies, and both small and high volume orders. All products are designed to ensure easy and problem free connection. We offer a fast turn round of custom items to keep your ordering and integration timescales to a minimum. NEW - Pickering s able Design Tool Go to pickeringtest.com/cdt to find out more. Over the years, we have received many requests for customized cabling solutions that are often based on our standard cable assemblies but adjusted to match specific application requirements. To help with this, we have introduced our able Design Tool a new graphically based web tool for cable design. We're excited about the features the software includes: Graphical design of customized cable assemblies Built-in library of standard cable sets to be used as the basis for customization or cables can just be defined from scratch The ability to store cable assemblies in the loud and develop over time Each cable design has a documentation pdf file detailing all of the specifications Very detailed design characteristics including the selection of connector types, wire type, pin definitions, pin and cable labeling, cable bundling, length selection, sleeving, comments, etc. Runs on popular browsers, Windows, ac and Linux ully supported on popular tablets: ipad and Android Built-in tutorials allow you to get quickly up to speed Because the able Design Tool is a web-based tool, we will continually update it to better accommodate your requirements and features. Your data is not trapped; complete details of the design are always available to the user at any time via the documentation or spreadsheet file. Once a cable is designed, you can submit it to us for quotation. Page 1

20 Appendix - Standard Voltage Part Number Listing ables: Standard Voltage -Pin D-Type onnector to onnector End 1 End Product Order ode/part Number able Exit able Exit 0.m Long 1m Long m Long Towards Away from Towards Away from Away from Towards m m m- ates With a Pickering Switching Product ( end) m m m m m m- No Data Sheet Page 1 alibration Port able or Precision Resistor odules: -Pin D-Type to X m Bayonet Plug End 1 End Product Order ode/part Number able Exit able Exit 1m Long (ax) 1.m Long (ax) 1.m Long (ax) 1 x x x Away from x Rear SL SL SL ates With a Pickering Switching Product ( end) Data Sheet Page 1 ables: Standard Voltage -Pin D-Type onnector to Unterminated End 1 End Product Order ode/part Number Unterminated able Exit Options 0.m Long 1m Long m Long Away from Towards ates with a Pickering Switching Product Boot Lace errules m-U m-U m-U ut 00D--0A00 A00D--0A100 A00D--0A00 Tinned Ends A00D-T-0A00 A00D-T-0A100 A00D-T-0A00 Boot Lace errules m-U m-U m-U No ut 00D--0A00 A00D--0A100 A00D--0A00 No Tinned Ends A00D-T-0A00 A00D-T-0A100 A00D-T-0A00 No Data Sheet Page 1 Type able Exit onnector Block able onnector onnector Blocks and onnectors: Standard Voltage -Pin D-Type Product Order ode/part Number With Backshell Without Backshell ates with a Pickering Switching Product Rear No Options Options No Data Sheet Page 1 1 Type ount able Exit PB onnector Right Angle PB ount Straight PB ount Breakouts and PB onnectors: Standard Voltage -Pin D-Type Product Order ode/part Number ates with a Pickering Switching Product N/A R No N/A R No N/A S No N/A S No Data Sheet Page Page 0