MIL-DTL Series III Type Connectors

Transcription

1 -90 Memory Stick How To Order Sample Part Number -90 NF -5 N H P Series / Basic Part No. -90 NF = Aluminum/admium Olive Drab ME = Aluminum/Electroless Nickel MT = Aluminum/Nickel PTFE ZR = Aluminum/Zinc-Nickel Storage apacity Options = Gb, 6 = 6 Gb, 8 = 8Gb Shell Size 5, 7, 9,,, 5 Alternate Key Position A, B,, D, E, N = Normal; Per MIL-DTL-8999 USB Orientation H = V = Protective over Option P = Series cover (omit for none).600 Max A Max Master Key Male Type A Shorting ap Nut, oupling View shown with Protective ap Dimensions Shell Size A Max 5.80 (.5) 7.06 (5.7) 9.56 (8.5).6 (.7).768 (.9) (8.0) Series over NOTES. System requirements: Windows 000, XP, Vista, Windows 7.. ompatibility: plug and play; ompliance.. Interface:, Type A male.. Data transfer rates: : Up to 5 Mb/sec read, 0Mb/sec write. 5. Password protection and AES encryption. 6. Mates with -0,-,-,- & Environmental parameters: Operating temperatures: -0 to 85 (see part number development) 8. Storage temperatures: -0 to Humidity range operating: 0% to 95% 0. Material/ Barrel, coupling nut: Insulators: high grade rigid dielectric/ N.A. Seal: fluorosilicone/n.a. EMI grounding spring: Beu /electroless nickel plate. Hardware: stainless steel/passivated 06 Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog -7

2 -70 Feedthrough with USB Female to Female Interface How to Order Sample Part Number -70 NF 00-7 A A N H Basic Number -70 onnector Style See Material and table Shell Size 5 or 7 USB Performance = See onnector Style table USB Front Interface USB Rear Interface Alternate Polarization A = Type A A = Type A A, B,, D, E, N = Normal Feed-Thru USB Orientation H = V = USB Orientation Options (Partial Views Shown) NF M MT ZR Material and Aluminum/admium, Olive Drab Aluminum/Electroless Nickel Alumimun/Nickel PTFE Aluminum/Black Zinc-Nickel = onnector Style 07 Rear panel mount, jam nut receptacle 00 Wall mount receptacle with slotted holes D0 Wall mount receptacle with round holes M Wall mount receptacle with metric clinch nuts NOTES. See Section A for alternate key positions, panel cutout dimensions. onnector style 00 with slotted hole is front panel mount only. Meets IP67 in unmated condition, IP68 mated Wiring Name able olor (USB) Description Recommended Wire Sizes (AWG) (V Bus) Red +5 V (D-) White Data - 8 (D+) Green Data + 8 (GND) Black Ground Shell Size 5 7 Jam Nut Mount H J K Flat in mm in mm in mm L Thread M8 X.0-6G 0.00R M X.0-6G 0.00R Shell Size P-.L-TS-A P-.L-TS-A Wall Mount A Thread B Sq Bsc D Bsc E F G Holes in mm in mm in mm in mm in mm in mm Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog

3 -70 Feedthrough with USB Female to Female Interface 07 - REAR PANEL MOUNT, JAM NUT REEPTALE Master Keyway Type A Female oupler.570 (9.87) Max.890 (.6) Max.579 (.7).555 (.0) x A Thread x J K Flat H x olor Band: Red (Full Mate Indicator) L Thread. (.0) 00, DO AND M - WALL MOUNT REEPTALES 00 - Slotted Hole Face View D0 - Round Hole Face View M - linch Hole Face View Master Keyway USB Female.0 Type A oupler USB Female.0 Type A oupler Master Keyway x.906 (.0) x (0.68) Sq..08 (0.68) Sq. x (0.68) Sq. x (.60).65 (.9).6 (.5).0 (.05).005M.005M.570 (9.87) Max. (.5). (.5) 00 and D0 - Side View M - Side View.650 (6.5).600 (5.).550 (9.7) Max.098 (.9).650 (6.5).600 (5.) M X 0.5-6g linch Nut Rear view applies to all wall mount receptacles x A Thread x olor Band: Red (Full Mate Indicator) x A Thread x olor Band: Red (Full Mate Indicator).065/.50 Panel Accommodation (This Side Only).065/.50 Panel Accommodation (This Side Only) PIN PIN All external dimensions, features, etc. compliant with D8999/0, /, &/6. onsult factory for additional information. 06 Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog -

4 Type A -5 onnector with USB Male () or Female () Interface to rimp Removable ontacts How to Order Sample Part Number -5 nf 00-5 a N H T Basic Number -5 onnector Style See Material and table See onnector Style table Rear View Shell Size 5 USB Performance = USB Interface Type A = Type A Alternate Polarization A, B,, D, E, N = Normal; per MIL-DTL-8999 NF M MT ZR Material and Aluminum/admium, Olive Drab Aluminum/Electroless Nickel Alumimun/Nickel PTFE Aluminum/Black Zinc-Nickel onnector Style G6 07 Rear panel mount, jam nut receptacle 00 Wall mount receptacle with slotted holes D0 Wall mount receptacle with round holes M Wall mount receptacle with metric clinch nuts Wiring USB Orientation H = V = Shrink Boot T = Shrink Boot; Omit for none -5 supercedes -. ontact factory for dimensional differences. USB Orientation Options (Partial Views Shown) NOtes. See Section A for alternate key positions, panel cutout dimensions. onnector style 00 with slotted hole is front panel mount only. rimp removable size socket contacts (M909/56-8) supplied loose. Meets IP67 in unmated condition, IP68 mated Name able olor (USB) Description Recommended Wire Sizes (AWG) (V Bus) Red +5 V (D-) White Data - 8 (D+) Green Data + 8 (GND) Black Ground = (receptacle) or Key (plug) All external dimensions, features, etc. compliant with D8999/0, /, &/6. onsult factory for additional information. G6 plug with accessory threads Master Key USB Male.0 Type A.50 (59.69) Max.085 (.6) Max Grommet.80 (5.5) Max.80 (0.9).797 (0.) oupling Nut M X.0-6G 0.00R Special Arrangement Size avities (Type A) Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog

5 Type A -5 onnector with USB Male () or Female () Interface to rimp Removable ontacts 07 - Rear panel mount, jam nut receptacle with accessory threads USB Female.0 Type A ( Orientation).579 (.7).555 (.0).890 (.6) Max.0 Max.80 (7.) Min.085 (.6) Max Grommet Special Arrangement Size avities (Type A).56 (8.5) x.8 (7.69).066 (7.08).056 (8.8) Flat.68 (.6).6 (0.99) M8 X.0-6G 0.00R. (.0) M X.0-6G 0.00R 00 wall mount receptacle with accessory threads USB Female.0 Type A.08 (0.68) Sq. x.906 x (9.5).0 (56.6) Max.098 (.9).085 (.6) Max Grommet Special Arrangement Size avities (Type A).6 (.5).0 (.05).8(.60).65(.9).005M M X.0-6G 0.00R Do - wall mount receptacles with accessory threads USB Female.0 Type A.768 (9.5).0 (56.6) Max.098(.9).08(.).085 (.08) Max Grommet Special Arrangement Size avities (Type A).08 (0.68) Sq. x (.5).0 (.05) M X.0-6G 0.00R m - wall mount receptacles with accessory threads.0 (56.6) Max Special Arrangement M X 0.5-6g USB Female.0 Type A linch Nut Size avities.098 (.9) (Type A).005M.085 (.6) Max Grommet x (9.5).08 (0.68) Sq. M X.0-6G 0.00R 06 Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog -

6 - Adapter with Accessory Threads and or Socket ontacts to USB Female Interface How to Order Sample Part Number - NF A P N T Basic Number - onnector Style See Material and table See onnector Style table Shell Size 5 Insert Arrangement 5 = IAW MIL-STD-560, 5-5 USB Performance = USB Rear Interface A = Type A ontact Style P = S = Socket Material and NF Aluminum/admium, Olive Drab M Aluminum/Electroless Nickel MT Alumimun/Nickel PTFE ZR Aluminum/Black Zinc-Nickel onnector Style G6 07 Rear panel mount, jam nut receptacle Alternate Polarization Shrink Boot P ( connector interface ) Only pins needed) 5 0 A, B,, D, E, N = Normal; per MIL-DTL-8999 T = Shrink Boot; Omit for none Wiring Diagram RED AWG WHITE 8 AWG P ( FEMALE) PIN NAME DESRIPTION V-BUS +5 V D- DATA- 00 Wall mount receptacle with slotted holes D0 Wall mount receptacle with round holes M Wall mount receptacle with metric clinch nuts 9 GREEN BLAK 8 AWG AWG D+ GND DATA+ GROUND NOTES. See Section A for alternate key positions, panel cutout dimensions. onnector style 00 with slotted hole is front panel mount only. Insert arrangement in accordance with MIL-STD-560, 5-5. ontact factory for additional options. Meets IP67 in unmated condition, IP68 mated 5. For custom pin assignment consult factory All external dimensions, features, etc. compliant with D8999/0, /, &/6. onsult factory for additional information. G6 PLUG WITH AESSORY THREADS = Master Key See Note 5 Wiring able Name olor (USB) Description Recommended Wire Sizes (AWG) (V Bus) Red +5 V (D-) White Data - 8 (D+) Green Data + 8 (GND) Black Ground.00 (60.96) Max.80 (7.) Min Type A Female.80 (5.5) MAX ( Interface Shown).80 (0.0).797 (0.) M X.0-6G 0.00R Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog

7 - Adapter with Accessory Threads and or Socket ontacts to USB Female Interface 07 - REAR PANEL MOUNT, JAM NUT REEPTALE WITH AESSORY THREADS See Note = (See Note 5).00 (60.96) Max.890 (.6) Max.579 (.7).555 (.0) USB Female.0 Type A x.56 (8.5).8 (7.69).066 (7.08).056 (6.8) Flat.68 (.6).6 (.00) ( Interface Shown) olor Band: Red (Full Mate Indicator) M X.0-6g 0.00R M8 X.0-6g 0.00R. (.0) 00, DO AND M - WALL MOUNT REEPTALES WITH AESSORY THREADS 00 - Slotted Hole (Mating Face) D0 - Round Hole (Mating Face) M - linch Hole (Mating Face) ( Interface Shown) ( Interface Shown) ( Interface Shown) See Note.6 (.5) M X 0.5-6g.0 (.05) See Note linch Nut See Note.005M.005M. (.9).08 Sq. (0.68) x.906 (.0) See Note x.969. (.9).08 Sq. (0.68) x.969. (.9).08 Sq. (0.68) x.969.8(.60).6(.5).65(.9).0(.05).005m.005m 00 and D0 - (Side View) M - (Side View).00 (60.96) Max.00 (60.96) Max.768 (9.5).098 (.9).768 (9.5).098 (.9) Rear View Female Type A locations the same for all wall mount receptacles M X.0-6g 0.00R M X.0-6g 0.00R olor Band: Red olor Band: Red Full Mate Indicator) Full Mate Indicator) 06 Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog -9

8 - with USB Female Interface to P Tail Termination How to Order Sample Part Number - NF 00-5 A N H Basic Number - onnector Style See Material and table See onnector Style table Square Flange Rear View Shell Size 5 USB Performance = USB Interface Type A = Type A Alternate Key Position A, B,, D, E, N = Normal; per MIL-DTL-8999 USB Orientation H = V = USB Orientation Options (Partial Views Shown) Jam Nut Material and NF Aluminum/admium, Olive Drab M Aluminum/Electroless Nickel MT Alumimun/Nickel PTFE ZR Aluminum/Black Zinc-Nickel onnector Style 07 Rear panel mount, jam nut receptacle 00 Wall mount receptacle with slotted holes D0 Wall mount receptacle with round holes M Wall mount receptacle with metric clinch nuts X.0 (.8).56 (.6) Recommended (Solder Side) X.060±.005 (.5±.7) X.07±.005 (.889±.7) X.50 (.8) = X.060±.005 (.5±.7).56(.6) X.0 (.8) X.07±.005 (.89)±(.) X.50 (.8) NOTES. See Section A for alternate key positions, panel cutout dimensions. Rear panel mount only. Meets IP67 in unmated condition, IP68 mated. Material/es: Insulators: high grade rigid dielectric/ n.a. ontacts: copper alloy, gold plated Seals: silicone based elastomer USB (shell/contacts): copper alloy Dielectric: hi-temp thermoplastic PA9T UL9V-0 Hardware: stainless steel/passivated Wiring Name able olor (USB) Description Recommended Wire Sizes (AWG) (V Bus) Red +5 V (D-) White Data - 8 (D+) Green Data + 8 (GND) Black Ground All external dimensions, features, etc. compliant with D8999/0, /, &/6. onsult factory for additional information Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog

9 - with USB Female Interface to P Tail Termination 07 - REAR PANEL MOUNT, JAM NUT REEPTALE = Female Type A Shown.066 (7.08).056 X (6.8) FLAT.890 (.6) MAX.579 (.7).555 (.0).56 (8.5).8 (7.69).000 (5.) MAX X X.00±.00 (.5 ±.5).00 (.76).0 (.56) X.0±.00 (.79 ±.5) haracters are shown For reference only.68 (.6).6 (.00).090 (.9) 00, DO AND M - WALL MOUNT REEPTALES 00 - Slotted Hole Face View D0 - Round Hole Face View M - linch Hole Face View USB Female.0 Type A oupler USB Female.0 Type A oupler x.906 (.0) x (0.68) Sq..08 (0.68) Sq. x (0.68) Sq. x (.60).6 (.5).65 (.9).0 (.05).005M.005M =. (.5). (.5) M X 0.5-6g linch Nut 00 and D0 - (Side View) M - (Side View).000 (5.) Max.768 (9.5).0 (.0) 6X X.05 (.67) 6X.768 (9.5).00 (.76).0 (.56).000 (.5) Max X.0 (.0).05 (.67).00 (.76).0 (.56) haracters are shown for referance only.098 (.9) olor Band: Red (Full Mate Indicator) Potting ompound 06 Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog -5

10 -0 oupler with Accessory Threads and USB Male-to-Female () or Female-to-Female () How to Order Sample Part Number -0 NF 00-5 A A N H T Basic Number -0 onnector Style Shell Size 5 See Material and table USB Performance = See onnector Style table USB Front Interface USB Back Interface A = Type A A = Type A Square Flange Alternate Key Position A, B,, D, E, N = Normal per MIL-DTL-8999 USB Orientation H = V = Shrink Boot T = Part No (Omit for None) Jam Nut NF M MT ZR Material and Aluminum/admium, Olive Drab Aluminum/Electroless Nickel Alumimun/Nickel PTFE Aluminum/Black Zinc-Nickel All external dimensions, features, etc. compliant with D8999/0, /, &/6. onsult factory for additional information. G6 onnector Style 07 Rear panel mount, jam nut receptacle 00 Wall mount receptacle with slotted holes D0 M Wall mount receptacle with round holes Wall mount receptacle with metric clinch nuts Wiring Name able olor (USB) Description Recommended Wire Sizes (AWG) (V Bus) Red +5 V (D-) White Data - 8 (D+) Green Data + 8 (GND) Black Ground USB Orientation Options (Partial Views Shown) = (receptacle) or Key (plug) G6 - PLUG WITH AESSORY THREADS Master Key USB Male.0 Type A oupler.80 (.5) Max.95 (9.5) Max USB Female.0 Type A.80 (0.0).797 (0.) M X.0-6g 0.00r oupling Nut - 06 Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog

11 -0 oupler with Accessory Threads and USB Male-to-Female () or Female-to-Female () 07 - REAR PANEL MOUNT, JAM NUT REEPTALE WITH AESSORY THREADS USB Female.0 Type A oupler.890 (.6) Max.579 (.7).555 (.0).70 (.) Max x.56 (8.5).8 (7.69).066 (7.08).056 (6.8) Flat.68 (.6).6 (.00) olor Band: Red (Fully Mated Indicator) M8 X.0-6G 0.00R M X.0-6G 0.00R. (.0) 00, DO AND M - WALL MOUNT REEPTALES WITH AESSORY THREADS 00 - Slotted Hole Face View D0 - Round Hole Face View M - linch Hole Face View USB Female.0 Type A oupler USB Female.0 Type A oupler x.906 (.0) x (0.68) Sq..08 (0.68) Sq. x (0.68) Sq. x (.60).65 (.9).6 (.5).0 (.05).005M.005M.768 (9.5). (.5). (.5) = 00 and D0 - Side View M - Side View.70 (.) Max.70 (.) Max.098 (.9).768 (9.5) M X 0.5-6g linch Nut.098 (.9) olor Band: Red (Fully Mated Indicator) M X.0-6G 0.00R olor Band: Red M X.0-6G 0.00R (Fully Mated Indicator) NOTES. See Section A for alternate key positions, panel cutout dimensions. onnector style 00 with slotted holes is front panel mount only. Meets IP67 in unmated condition, IP68 mated. Material and finish Shell, jam nut: al alloy Insulators: high grade rigid dielctric/n.a. ontacts: copper alloy, gold plated Seals: silicone based elastomer USB (shell/contacts): copper alloy Dielectric: hi-temp thermoplastic PA9T UL9V-0 Hardware: stainless steel /passivated 06 Glenair, Inc Air Way, Glendale, A U.S. AGE code 06 SuperSeal atalog -