Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
|
|
- Kenneth Beasley
- 5 years ago
- Views:
Transcription
1 Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board termination. 0-04P connectors are free-standing (not for panel mounting) and mate to 0-025S cable plugs. ontacts are permanently installed and are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting holes and integral standoffs simplify installation. MI shroud improves MI performance. luorosilicone face seal provides watertight interface. vailable in 2 different contact arrangements, these connectors feature size #23 signal contacts along with # and #2 power contacts for up to 23 amps current rating. ow To Order Sample Part Number 0-04P J-25P2 M P Part Number 0-04P eader Receptacle with 0 P Tail Pin ontacts for Termination to ackplanes or lexible ircuits Shell Size - rr. Shell inish ardware Option P Tail Length See Table for vailable rrangements M lectroless Nickel general purpose applications MT Nickel-PT 000 our rey maximum corrosion protection and durability (non-reflective grey) ZNU Zinc-Nickel with lack hromate tactical applications (non-reflective black) dditional shell finishes are listed on page -. N No ardware P emale Jackpost a.25 Inch (3.2 mm.).250 inch (.4 mm.) P TIL LNT INX Specifications urrent Rating #23 5 MPS, # 3., #2 23. ielectric Withstanding Voltage # V RMS, #2 and # 00 V RMS Insulation Resistance 5000 megohms minimum Operating Temperature -5. to +50. Shock 300 g. Vibration 3 g. Shell ontacts Insulator MI Shroud Interfacial Seal Jackposts Tray ncapsulant Materials and inishes luminum alloy opper alloy, 50 microinches gold plated Liquid crystal polymer (LP) luminum alloy lourosilicone rubber 300 series stainless steel Thermoplastic poxy imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
2 Section : Right ngle Printed ircuit oard Table ontact rrangements Layout -5 5 ontact Quantity #23 # #2 ace View ross-sectional View of 0-04P INSULTOR INTRIL SL POXY PIN ONTT -2P MI SROU -5 5 SLL -3P3 3 -P P2 2 Table 2 ardware Option - -P P P P4 4 N No Mating ardware onnector is supplied with threaded holes. Shell sizes and L have #-32 threads, other sizes have #4-40 threads. Thread depth is.50" (3.). P Jackposts onnector is supplied with non-removable stainless steel jackposts. Shell sizes and L have #4-40 UN thread, other sizes have #2-5 thread. -2P 22-3P P P5 5 - J-P4 3 4 J-25P J J-P K-2P K-35P K K-P L-P INX imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
3 Section : Right ngle Printed ircuit oard.500 (2.0) MX.5 (4.5). (4.5) MX SI MX JKPOST, # P imensions: Shell Sizes -, J, and K.30 (.2) MX.0 (.) MIN.22 (5.) MIN 0-04P Shell Sizes -, J and K Shell Size P TIL LNT ±.020 (0.5) O :.25 (3.) O :.250 (.35) Max. asic Max. In. mm. In. mm. In. mm J K (0.4).540 (3.2) MX ONTT TIL I #23 ONTT.0/.022 (0.4/0.5) # ONTT.00/.04 (.52/.3) 2-5 UN-2 2 PLS SI MX 0-04P imensions: Shell Size.20 (5.3).455 (3.) MX.25 (30.) SI SI.0 (2.4) MX.3 (.3) MX.0 (.) MIN.22 (5.) MIN.530 (3.4) MX.5 (4.5).45 (2.2) JKPOST, #2-5.5 (5.2) MX.0/.022 (0.4/0.5) P TIL LNT ±.020 (0.5) O :.25 (3.) O :.250 (.35) INX 2-5 UN-2 2 PLS.25 (30.) SI.455 (3.) MX imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
4 Section : Right ngle Printed ircuit oard 0-04P imensions: Shell Sizes & L #2-5 LT SRW.222 (5.4) MX SI MX.45 (0.54) MX.2 (.05) MIN.0 (2.24).550 (3.) MX P TIL LNT ±.020 (0.5) O :.25 (3.) O :.250 (.35) JKPOST, #4-40 ONTT TIL I #23 ONTT.0/.022 (0.4/0.5) # ONTT.00/.04 (.52/.3) #2 ONTT.0/.02 (2.44/2.34).5 (4.5).4 (2.4).00 (.) MX 4-40 UN-2 2 PLS SI MX 0-04P Shell Sizes and L Shell Max. asic Max. Size In. mm. In. mm. In. mm L INX imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
5 Section : Right ngle Printed ircuit oard ole Patterns for 0-03P and 0-04P Receptacles This section contains printed circuit board footprints for right angle Series receptacles. The contact identification numbers are shown for the connector mounting side of the P board. ontact tails are gold over nickel plated. rr. -5 ONNTOR ORINTTION 0-03P N 0-04P PRINT IRUIT OR PTTRNS omponent Mounting Side of Mating ace of onnector is Toward Top of Page.003 M M.55 (4.35) (.) P Tail iameter ontact Ø iameter Size In. mm. # # # (OL TO PT.022 (0.5) MX I ONTT 5x).003 M M b-2p2.5 (.).20 (.) M M (OL TO PT.04 (.3) MX I ONTT 2X).003 M M.5 (4.45) b-.003 M M.5 (.).355 (.0) (OL TO PT.022 (0.5) MX I ONTT x).003 M M INX c M M.4325 (0.).5 (2.) (OL TO PT.022 (0.5) MX I ONTT 3x).003 M M imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
6 Section : Right ngle Printed ircuit oard rr. -5-3P3 0-03P N 0-04P PRINT IRUIT OR PTTRNS omponent Mounting Side of Mating ace of onnector is Toward Top of Page.003 M M.003 M M.425 (2.2).5 (24.5) (2.2).5 (4.45) 2x 3.5 (24.5) 2 (OL TO PT.022 (0.5) MX I ONTT 5x).003 M M (OL TO PT.04 (.3) MX I ONTT 3x).003 M M -P2.003 M M.5 (24.5).425 (2.2).205 (5.2) 2X (OL TO PT.022 (0.5) MX I ONTT 5x).003 M M -P2 (OL TO PT.04 (.3) MX I ONTT 2X).003 M M.003 M M.5 (2.32).555 (4.) (OL TO PT.022 (0.5) MX I ONTT x).003 M M - (OL TO PT.04 (.3) MX I ONTT 2X).003 M M.003 M M.555 (4.) 0.5 (2.32).25 (.0) 2X (OL TO PT.022 (0.5) MX I ONTT x).003 M M INX imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
7 Section : Right ngle Printed ircuit oard rr. -P3 0-03P N 0-04P PRINT IRUIT OR PTTRNS omponent Mounting Side of Mating ace of onnector is Toward Top of Page.003 M M.555 (4.).5 (4.45) 2x (2.32) 2 3 (OL TO PT.04 (.3) MX I ONTT 3x) (OL TO PT.022 (0.5) MX I ONTT 4x).003 M M 2x.25 (.5) 2x f-5p2.003 M M (OL TO PT.04 (.3) MX I ONTT 2x).003 M M.325 (.0) (.4) 2X.25 (32.3) 0 (OL TO PT.022 (0.5) MX I ONTT 3x).003 M M f M M.325 (.0) (32.3) (OL TO PT.022 (0.5) MX I ONTT 23x).003 M M.25 (32.3).325 (.0) f-5p5.003 M M (OL TO PT.04 (.3) MX I ONTT 2x).003 M M (4.45) 4x.05 (5.43) (30.) (OL TO PT.022 (0.5) MX I ONTT 33x).003 M M INX g M M imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
8 Section : Right ngle Printed ircuit oard rr. h-0p4 0-03P N 0-04P PRINT IRUIT OR PTTRNS omponent Mounting Side of Mating ace of onnector is Toward Top of Page.25 ±.003 (3. ±0.0) 2x.003 M M.00 (22.) (45.2) (OL TO PT.022 (0.5) MX I ONTT x).003 M M 2.23 (5.).42 (.) (OL TO PT.0 (2.44) MX I ONTT 4x).003 M M h-2p.20 (.3).25 ±.003 (3. ±0.0) 2x.003 M M.00 (45.2).00 (22.).25.5 (4.45).5 (4.45) (OL TO PT.04 (.3) MX I ONTT x).003 M M (OL TO PT.022 (0.5) MX I ONTT 22x).003 M M (.2).00 (2.54) h-3p2 h-54p2.00 (22.).00 (45.2).25 ± (3. ±0.0) 2x M M.25 ±.003 (3. ±0.0) 2x.003 M M (OL TO PT.022 (0.5) MX I ONTT 52x).003 M M (4.3).42 (.) 2.00 (22.) (23.) 2.00 (45.2) (22.) ( (OL TO PT.022 (0.5) MX I ONTT 34x).003 M M (OL TO PT.0 (2.44) MX I ONTT 2x).003 M M.50 (4.3) 3.00 (45.2) (OL TO PT.04 (.3) MX I ONTT 2x).003 M M -5p5.25 ±.003 (3. ±0.0) 2x.003 M M (5.) 4x 3 2 (OL TO PT.0 (2.44) MX I ONTT 5x).003 M M INX imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
9 Section : Right ngle Printed ircuit oard rr. - J-P4 0-03P N 0-04P PRINT IRUIT OR PTTRNS omponent Mounting Side of Mating ace of onnector is Toward Top of Page.25 ±.003 (3. ±0.0) 2x.003 M M.003 M M (OL TO PT.04 (.3) MX I ONTT 4x).003 M M (22.) (45.2) (20.5) (4.02) (.4).5 (4.45).5 (4.02) (OL TO PT.022 (0.5) MX I ONTT x).003 M M (OL TO PT.022 (0.5) MX I ONTT 3x).003 M M J-25P2.003 M M 2.05 (20.5) (3.) (OL TO PT.04 (.3) MX I ONTT 2x).003 M M (OL TO PT.022 (0.5) MX I ONTT 23x).003 M M J M M.05 (20.5).5 (4.02) (OL TO PT.022 (0.5) MX I ONTT 33x).003 M M.05 (20.5).5 (4.02) INX J-P.003 M M (OL TO PT.04 (.3) MX I ONTT x).003 M M (4.45) x imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
10 Section : Right ngle Printed ircuit oard rr. K-2P4 K-35P2 K-43 K-P.003 M M 0-03P N 0-04P PRINT IRUIT OR PTTRNS omponent Mounting Side of Mating ace of onnector is Toward Top of Page.003 M M.003 M M (OL TO PT.04 (.3) MX I ONTT 2x).003 M M (25.5) 2.05 (5.) (OL TO PT.022 (0.5) MX I ONTT 23x).003 M M (4.2) 2.05 (5.) (OL TO PT..005 (25.5).022 (0.5) MX I ONTT 33x).003 M M (5.).220 (5.5).003 M M (25.5) 2.50 (.05) 2x (25.5) (5.) (4.45) (OL TO PT.04 (.3) MX I ONTT 4x).003 M M (OL TO PT.04 (.3) MX I ONTT x).003 M M 2 (OL TO PT.022 (0.5) MX I ONTT 43x).5 (4.45).42 (0.) 2.03 (5.) L-P.25 ±.003 (3. ±0.0) 2x.003 M M.23 (5.) 5x (OL TO PT.0 (2.44) MX I ONTT x).003 M M INX imensions in inches (millimeters) and are subject to change without notice. 200 lenair, Inc. ode 0324 Printed in U.S.. LNIR, IN. 2 IR WY LNL, X Mail: sales@glenair.com
A B C D E F G H J K L M N P Q
icro- Specifications IX onnector Shell, etal onnector Shell, lastic Terminal lock, ( & S) Interfacial Seal in ontact (Twistin) Socket ontact ncapsulant (otting) ackscrews, ackposts, loat ounts igtail Wire,
More informationHi Density Card Connector SPECIFICATIONS: STANDARD MATERIALS AND FINISHES
Hi Density ard onnector SPEIFITIONS: The micro-miniature card connector series 106 is designed for a space conscious industry. The hi-density card configuration connector provides an extremely dense and
More informationHigh-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type
233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall
More information22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
More informationD Subminiature Connectors
Subminiature onnectors Subminiature ontents The ITT annon Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationlif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
More informationDETAIL SPECIFICATION SHEET
INH-POUND MIL-DTL-32139/5 1 August 2012 DETAIL SPEIFIATION SHEET ONNETORS, ELETRIAL, RETANGULAR, NANOMINIATURE, SINGLE ROW, PLUG, POLARIZED SHELL, PIN ONTATS, VERTIAL PB THROUGH-HOLE TYPE This specification
More informationEMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI at the signal & power I/O
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI at the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution
More informationContacts, Tools, and Accessories
ontacts, Tools, and ccessories able reduction sleeve REDUTION SLEEVEs FOR BLE Reduction Sleeve Length for use with Mechanical able lamp or Basketweave able Grip Shell Sleeve P/N Sleeve inner diameter [mm]
More informationRemote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
More informationLow Profile R/A type Board to Cable connector (SGC and Discrete wire)
Low Profile R/ type oard to able connector (S and iscrete wire) Height at mating with vertical receptacle and Right ngle plug is 4.mm PTNT PNIN PL SRIS able assembly by blanket soldering with different
More informationQUADRAX CONNECTOR SERIES
ONNTOR SRIS or Shell Styles MIL-TL-8999/0 & 6 THNIL HRTRISTIS SPIITIONS Temperature Rating: -55 to + 5 orrosion: MIL-ST-0 Method 0, Test ondition Shock: MIL-ST-0 Method, Test ondition Vibration: MIL-ST-0
More informationGecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
More informationAmphenol Aerospace. D38999 Series III Groundplane Connector with Quadrax PCB Sockets Installed
mphenol erospace Size 8 igh Speed Quadrax and ifferential Twinax ontacts or use in IL-TL-38999 Subminiature ylindrical and rinc 600 Rectangular onnectors. Quadrax contacts consist of an outer contact with
More informationD-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
More informationMIL-DTL Series III Type Connectors
-90 Memory Stick How To Order Sample Part Number -90 NF -5 N H P Series / Basic Part No. -90 NF = Aluminum/admium Olive Drab ME = Aluminum/Electroless Nickel MT = Aluminum/Nickel PTFE ZR = Aluminum/Zinc-Nickel
More information0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
More informationhigh speed RACk & PANeL connectors
high speed Rk & PNeL connectors technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test ondition shock: MIL-STD-0 Method, Test ondition Vibration:
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
More informationPRODUCT BRIEF Copper to Fiber Ethernet Media Converter 10/100/1000BASE-T to 1000BASE-SX M38999, 28VDC
050-103 PRODUCT BRIEF 10/100/1000BASE-T to 1000BASE-SX M38999, 28VDC REV DESCRIPTION DATE APPROVED 2 Preliminary 02/21/2016 MF/MT 3 Add ECCN 05/26/2016 RAS 4 Changed Shock and Vibe Specs, Updated 2D s,
More informationJDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More information.062 [1.57] Commercial Pin and Socket Connectors
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
More informationDETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, CRIMP TYPE
INCH-POUND MIL-DTL-83513/3J 6 July 2016 SUPERSEDING MIL-DTL-83513/3J w/mendment 2 4 September 2013 DETIL SPECIFICTION SHEET CONNECTORS, ELECTRICL, RECTNGULR, PLUG, MICROMINITURE, POLRIZED SHELL, PIN CONTCTS,
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/30 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 1, SIZE 20 SIGNAL
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/40 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83513/10D 26 April 2017 SUPERSEDING MIL-DTL-83513/10D 29 October 2008 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE,
More informationTHIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-115 PRODUCT BRIEF Media Converter, Dual or Single Channel, Panel Mount 28 VDC M38999 (Signal & Power), M38999 (Fiber Optic) REV DESCRIPTION DATE APPROVED 3 01/07/2016 MF 4 Add ECCN 05/26/2016 RAS 5
More information2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/33 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS
More informationuk.rs-online.com (UK) (International)
Thermocouple onnector Selection Guide uk.rs-online.com (UK) www.rs-components.com (International) International Thermocouple olour odes for onnector odies ll thermocouple connectors use true thermocouple
More informationPower Board to Board Connector
Power oard to oard onnector PD Series OUTLINE PD series is a board to board connector for high current power supply units which combines power and signal contacts. FETURE ontact is highly reliable connection
More informationITT Cannon Combination D-Sub Connectors
PPLICTIONS Video Coaxial Transmission (75Ω) RF and Telecom Transmission (50Ω) Power Interconnects (Up to 40) ITT Cannon Combination D-Sub Connectors RECTNGULR CONNECTOR SUITED FOR NETWORK ND COMMUNICTION
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationHEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
More informationFOR BOARD-TO-CABLE CONNECTION
OR OR-TO-L ONNTION 240R SRIS TURS 1.27 mm (0.0 in.) pitch contact arrangement enables high-density mounting. ellows ensure stable contact preventing pins from bending. The bellows also have excellent stability
More informationCommercial Version MIL-C-5015 Compatible D/MS
/ eries o ompliant ommercial ersion --5015 ompatile / / series connectors are intermateale and intermountale with --5015 connectors. he / series offers: ard dielectric interial (diallyl phthalate) inc
More informationDETAIL SPECIFICATION SHEET
INCH-POUND 14 February 2018 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE DUAL ROW, RECEPTACLE, REAR PANEL MOUNT, POLARIZED SHELL, PIGTAIL, SOCKET CONTACTS, CRIMP TYPE,
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationSMA connectors are well known as high performance and compact connector designed for RF broad band application. MIL-STD-348A.
SM onnectors SM connectors are well known as high performance and compact connector designed for R broad band application. Specifications Nominal impedance VSWR Insulation resistance ielectric withstanding
More informationMIL Based RF Coaxial Cable Sets, DC-18 GHz, M F05 Series
MI-38999 ased R oaxial able Sets, -18 z, M 05 Series void Multiple oaxial ables Quick ssemble/isassemble 38999 more rugged than SM, N TURS, MI ST MTRIS MI-38999 Series III connectors are QP listed from
More informationQPL, general purpose, NATC, hermetic, filtered, lanyard released and custom solutions. MIL-DTL Series III connectors and cable assemblies
QPL, general purpose, NATC, hermetic, filtered, lanyard released and custom solutions MIL-DTL-38999 Series III connectors and cable assemblies General purpose connectors Overview 6 Technical Specifications
More informationClarke & Severn Electronics Ph BUY NOW
Picture Index Flex Pin Contact System Space Level Screening MIL-MTL-33 Mounting Hardware & Tools Dual Row Hermetically Sealed Bi-lobe Dual Row Latching Bi-lobe Single Row Back Shells Clarke & Severn Electronics
More informationGeneral Specifications
Series M00 Snap-ction Pushbuttons Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications lectrical apacity
More informationDeutsch connectors are available in rectangular and cylindrical body shapes and feature :
Field Proven Reliability Deutsch s rugged all-metal bodies and corrosion resistant thermoplastic shells are manufactured from high quality materials selected for their ability to withstand years of environmental
More informationELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
More informationD-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
More informationEPIC EAB, EAC, and EPT Series
EPIC EB, EC, and EPT eries Industrial Circular Connectors tandard Off-The-helf... Category Description: ome Target pplications Number of s: Rated Voltage: Rated (Peak) Current: Coupling Type: Housing tyles:
More informationG-Series Servomotors. AC Brushless Servomotors. Understanding the G-Series Servomotor Model Numbers
rushless Servomotors G-Series Servomotors ORME s G-series brushless servomotors provide high torque-to-inertia ratios and excellent continuous torque and peak torque performance in a compact design. These
More informationQUADRAX /TWINAX CONNECTOR SERIES. MIL-DTL Style Connectors
QUADRAX /TWINAX CONNECTOR SERIES MIL-DTL-8999 Style Connectors QUADRAX AND TWINAX CONNECTORS MIL-DTL-8999 Twinax/Quadrax Plug 0.56 0. 0.85 0.05 Shell Size B Dia. +.008 -.0 K Max S Dia. Max Z Max 9 0.7
More informationNEW PRODUCT BULLETIN Linear Thrusters
ulletin #G-J0 NW PROUT UTIN inear Thrusters G Series lock Style Slides Tapped holes top, 'bore/thru hole from bottom () Toolbar- nodized aluminum Repairable, built-in air cylinder earing block- nodized
More informationAmphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications
Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems
More informationRR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
More informationD-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
More informationRFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
More informationCSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
More informationAmphenol. Advantage. R-Line R-146. Rectangular Attached Multi-Pin Industrial Cable Assemblies. Amphenol - Sine Systems
Amphenol Rectangular Attached Multi-Pin Industrial Assemblies Advantage R-146 R-Line Amphenol - Sine Systems Advantage * vs. the R-Line Molded Advantage Series * Patents pending Low Cost UL & CSA Listed
More informationDETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, SOLDER TYPE
INCH-POUND MIL-DTL-83513/1H 29 October 2008 SUPERSEDING MIL-DTL-83513/1G 25 June 2002 DETIL SPECIFICTION SHEET CONNECTORS, ELECTRICL, RECTNGULR, PLUG, MICROMINITURE, POLRIZED SHELL, PIN CONTCTS, CLSS M,
More informationProduct description. At a glance. Increased operating distance up to 40 mm Corner LEDs Sensing face rotatable in five directions.
IQ0 Short-body Inductive proximity sensors Tried and trusted housing style in 0 x 0mm dimension Product description The reliable IQ0 rectangular inductive proximity sensor has proven its reliability in
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More information10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
More informationElectrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
More informationGeneral Specifications
eneral Specifications Electrical apacity (Resistive Load) Logic Level: 0.V maximum @ 8V /D maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Note: See Supplement Index to find explanation of operating range.
More informationBroadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
More informationDETAIL SPECIFICATION SHEET SHELL, ELECTRICAL, CONNECTOR, PLUG, RECTANGULAR, POLARIZING
INH-POUN 28 October 2013 SUPSIN 7 March 2013 TIL SPIITION SHT SHLL, LTIL, ONNTO, PLU, TNUL, POLIZIN This specification is approved for use by all epartments and gencies of the epartment of efense. The
More informationVaricon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
More informationProfibus-PA. Profibus-PA. Process Automation. Over-Molded Cables Receptacles Field Wireables Accessories. UL File #: E
Profibus-PA Process Automation Over-Molded Cables Receptacles Field Wireables Accessories U File #: E9 PROFIBUS (Process Field Bus) is a standard for field bus communication in automation technology. The
More informationAbsolute encoders multiturn
Sendix M / M8 (shaft / hollow shaft) The Sendix M with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just x mm it
More informationSMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
More informationD-Sub. D Subminiature Selector Guide C. D- Subminiature. Series D*H MIL-DTL D*NM. Wire Gauge Range AWG. up to AWG 20 AWG AWG 18-30
D Subminiature Selector Guide D-Sub D- Subminiature Series D*NM D*H MIL-DTL-24308 Wire Gauge Range WG WG 18-30 up to WG 20 WG 18-30 Mating ycles 500 500 500 RoHS confirm vailable No No Layout 9, 15, 25,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
More informationVaricon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
More informationAbsolute encoders multiturn
The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of
More informationGeneral Specifications
General Specifications Electrical apacity (Resistive Load) Power Level: 6A @ 25V A & 3A @ 250V A or 6A @ 30V Other Ratings ontact Resistance: Insulation Resistance: ielectric Strength: Mechanical Life:
More informationSMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
More information... A Vital Part of Connection World CMPTER. 1.85mm Connector Applycation Receptacles With Accepts Pin
... A Vital Part of Connection World 1.85mm Connector Applycation Receptacles With Accepts Pin COPYRIGHT ELECTRONICS 2014 1.85mm Precision Connectors DESCRIPTION The 1.85mm connector are 50 ohm precision
More informationP3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
More informationAmphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol
More informationNEER Zinc Cable and Conduit Connectors For Flexible Metal Conduit
For Flexible Metal Conduit SC: Straight Squeeze Type Connector These squeeze type connectors are used to terminate flexible metal conduit to a 1/2 knockout in a dry location box or enclosure. 1/2" and
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
More informationQUADSPLITTER AND IN-LINE QUADSPLITTER
QUADSPLITTER AND IN-LINE QUADSPLITTER technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test Condition B shock: MIL-STD-0 Method, Test Condition
More informationPart No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
More informationYour Global Automation Partner. Mil-Spec Connectors Design Guide
Your lobal utomation Partner il-spec onnectors esign uide lobal eader in Industrial utomation Turck s sensors, connectivity, and fieldbus technology products are built to be the best. s one of the most
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More informationMaverick Series Gigabit Ethernet, External TFOCA II *, 1000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm
Maverick Series Gigabit Ethernet, External TFOCA II *, 000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm Single Port, Flange Receptacles FEATURES Compliant with IEEE-802.:2005 Gigabit Ethernet Optical
More informationFalcon Series Dual Port DVI Fiber Optic Media Converter, D VDC, Multimode, 850nM, Quadrax
Falcon Series Dual Port DVI Fiber Optic Media Converter, D38999 28VDC, Multimode, 850nM, Quadrax Dual DVI Port, Transmitter FEATURES Optical fi ber link distances up to 500 meters Operating temperature
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/23H 10 July 2017 SUPERSEDING MIL-DTL-55302/23H 3 December 2003 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, DECADE INCREMENT 10 THRU
More information242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
More informationCorning Gilbert Inc. Microwave Push-on Interconnects 1
Corning Gilbert Inc. Microwave Push-on Interconnects 1 GPO Specifications General Characteristics Impedance 50 ohms nominal Frequency range DC to 40 GHz Temperature range -65 C thru 165 C Electrical Characteristics
More informationTECHNICAL CHARACTERISTICS TV-CTV CONNECTORS (MIL-DTL SERIES III/EN3645)
V-V OOS (-- SS /) -- series connectors connectors edicated to harsh environment applications shell sizes (from 0 to ) hread coupling 00% scoop-proof ore than 0 contact arrangements ntermountable with --
More informationAmphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
More informationCatalog Navigation Guide
atalog Navigation Guide We have configured this online version of our catalog to take advantage of crobat navigation shortcuts (links). However, these links are not visible on the pages making them visible
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationGoogle Pixel DISASSEMBLE. PennEngineering
Google Pixel DISASSEMBLE June 4th, 2018 Allen Wang PennEngineering www.pemnet.com 1 Google Pixel Teardown www.pemnet.com 2 Details & Findings Pictures and Description of the Google Pixel and our disassembly
More informationCALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
More informationM22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
More informationPRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
More information